Please tell me - there absolutely MUST be an easier way to 'duplicate' a page! A simple ⌘D use to work in my older version - HELP :'(

Please tell me - there absolutely MUST be an easier way to 'duplicate' a page! A simple ⌘D use to work in my older version - HELP :'(

Sorry, but no.  Pages 4 is still in an iWork folder within your Applications folder.  You can use that to get work done.
Please also let Apple know at:
http://www.apple.com/feedback/pages.html

Similar Messages

  • Please tell me there is a way to remove the slide that cuts up the pictures

    Ok, your slideshow, photo album template in iphoto is THE BOMB.. so cool!
    But, someone thought, hey lets put one that cuts all the photos up and almost surely cuts the important part of whatever the original photo was.. grr?
    It wouldn't be so bad, if we could go back through the presentation and mix and match to make that slide work, but inevitably, it cuts out someone's head?
    Please tell me there is a work around, or way to tell it not to use that slide option? I'd rather have more photo on photos or multi photo frames than anything auto cutting pictures.
    Thanks!
    Jason

    Many of the themes are not designed for portrait oriented photos. That's what you're running into with the scrapbook theme. Not much you can do about it.
    There's a 3rd party slideshow application, PhotoPresenter, that has over 25 animated themes. There are several that are sort of like the scrapbook that do handle the portrait as they should be handled. Some of the available themes are shown in this demo page: PhotoPresenter Animated Slideshow Themes. Look at Portfolio, Frame and Album. It integrates seamlessly with iPhoto. and iTunes You can download and run it in demo mode.
    The early fading of music in a slideshow is a well documented problem. Just send your complaint/bug report to Apple at http://www.apple.com/feedback/iphoto.html. The more reports the better.

  • Second day after updating to iOS 6 on my iPhone 4, my contacts have duplicated.  Probably not all but many, and my contacts already numbered in the thousands.  Please tell me there is an easy fix to this problem!! I already had to go through contact-by-co

    Second day after updating to iOS 6 on my iPhone 4, my contacts have duplicated.  Probably not all but many, and my contacts already numbered in the thousands.
    Please tell me there is an easy fix to this problem!! I already had to go through contact-by-contact when I bought this phone and added contacts from my Blackberry and MS Outlook on the phone.  Many duplicated at that time and Apple said the only fix was to go through each one and decide to keep or delete.  I really don't want to do that again!

    I had this problem while I had iOS 5.1.1 installed for many months. Fortunately I only have about 150 contacts and only about half of them duplicated. I found that my problem was the way thing were set up in Outlook. I removed all of the duplicates and corrected everything in Outlook contacts (ignoring the address book) and have not had the problem since, Hope this helps.

  • PLEASE tell me there is a way to apply automatic strokes using the Pen Tool.

    To apply pencil and brush strokes using the Pen Tool (in Photoshop CC - the version I'm using), I would constantly have to right-click on my path, and on the dialog menu that pops up, select "Stroke Path...," then select which "Tool" (I namely use the Pencil and Brush tools), then hit "OK." And that gets ANNOYING. This is Photoshop CC - which means there should be a way for the Pen Tool to automatically apply the (Pencil/Brush) strokes while I'm creating paths. Illustrator does that - so there should be a way for Photoshop to do that as well. It's a software a majority of artists use; there SHOULD be a way to automatically apply pen strokes. PLEASE tell me there is.

    You can do a shape rather than a plain path, and apply a stroke there. But, just plain vanilla; no fancy brush tips or scatter or anything like that.

  • OMG HELP!   I somehow deleted an iMovie '11 project with over 16 hours of work on it.   Please tell me there is a way to recover my PROJECT!?!?!?

    Please tell me there is a way to recover my PROJECT!?!?!?
    I was trying to go to another library when I noticed a dupliacte file.   I "thought" I selected only that file and went to "Move project to trash".   When I tried to see my original Project I've been working on for over 16 hours... it was GONE!   It's not in my trash, not in the iMove-->Projects folder... Did I just hose myself?
    Please help!   I have 40 kids waiting to see this movie.

    No one except for you marked your other thread as solved, probably in error when you received the email notification that there was an answer. I changed that thread to normal so you can post there again.
    https://support.mozilla.com/en-US/forum/1/730764?

  • Please tell me there is a better way to configure multiple interfaces

    I have a desktop with interfaces with statically assigned network addresses, I can't use rc.conf to configure them anymore so my /etc/rc.local file now looks like:
    /sbin/ifconfig ext0 10.0.0.1/24
    /sbin/route add default gw 10.0.0.1
    /sbin/ifconfig int0 192.168.0.1/24
    I don't like this; it seems completely in-elegant and, worse, if I need to start up any demons that require networking to work, they aren't going to work.  I've considered patching the initscripts, but this is inelegant because then I have to merge changes every time I update them.  I guess maybe the best solution is to write my script for /etc/rc.d/, choosing a name unlikely to be taken by any script I'm likely to start in the future.  Please tell me there is a better way to do this.

    I read the news, it indicates that I can no longer use rc.conf to configure both of my network interfaces.  It suggests using network manager, which is silly, because all I need to do is assign static IPs.  So I spent some hours trying to find any documentation or examples on how to set this up with netcfg, but was unsuccessful.  Then I read some forum posts, but they had answers like "yeah, you can't do that anymore, read the news".  That was not helpful to me either (unless you mean to suggest that I should be using iproute instead of ifconfig in my scripts, which I see no need to do, ifconfig works and I already know what options to pass it).  I also tried searching the arch general mailing list, but didn't see anything addressing the topic either this month or last month.
    At any rate, I still haven't found a better solution to configuring multiple network interfaces than writing my /etc/rc.d/ script, although I have come across one other possible solution, namely, installing and configuring ifplugd, which I hadn't considered before.

  • Signing Applications - There must be an easier way

    Hello, I want to put free-iSMS on my N97 however it's unsigned so I can't. I've been reading up a lot on Google on how to sign an app or how to hack the N97 both of which are very long winded processes. There must be an easier way I can do it. It's all quite new to me and everything appears to be Chinese (literally).
    Does anyone know of the simplist guide that wont confuse me? 
    And is it safe to put all my phone details on the web???

    I followed the guide found within the forum you suggested, however when I went to download the certificate my (works) proxy server stopped the download due to the following reason
    [code]
    WARNING: ProxyAV has detected a virus in this
    file!
    File has been dropped.
    ProxyAV Administrator: unknown
    2009-10-09 14:47:52+00:00UTC
    Hardware serial number: 2205050030
    ProxyAV (Version 3.1.1.3(29863)) - http://www.BlueCoat.com/
    Antivirus Vendor: Sophos, Plc.
    Scan Engine Version: 2.90.1
    Pattern File Version: 4.45E.989453.1691461856 (Timestamp: 2009/10/09 12:16:00)
    Machine name: ProxyAV
    Machine IP address: 172.18.31.55
    Server: 221.238.19.22
    Client: 172.18.16.1
    Protocol: ICAP
    Virus: "Mal/Generic-A" found!
    URL: http://theme.esqimg.com/eshequn/isign/theme/isign/SignTool2.zip
     [/code]
    Is this a problem?
    Message Edited by rhysgm on 09-Oct-2009 05:06 PM

  • Is there an easy way to insert a page jump link in Muse?

    I have a client that wants to insert embeded videos onto one of his pages.  TWELVE OF THEM!  That is a lot of scrolling and I am wondering if there is an easy way to insert a page jump sot ath users can click at the video description and jump to the video below?

    Hello,
    You can achieve this by using the Anchor option in Muse. You will find the Anchor option between the Effects and Browser Fill options in the toolbar at the top of the Page.
    Please have a look at the screenshot :
    You can follow the steps below to achieve this functionality :
    1) Click on this Anchor option and then scroll down to the video where you wnat to place the anchor.
    2) Now click just beside the audio and it will place the anchor (the anchor icon) there.
    3) Now it will ask you to rename the Anchor. Give it a desired name.
    4) Now select the text which you want to be the trigger (which when clicked should scroll down to the video). Now in the Hyperlink option in the toolbar at the top, you should be able to see an Anchors catagory and all the anchor names (you created) listed there.
    5) Select the desired target Anchor there and this functionality should work fine for you.
    You can create 12 anchors for your 12 videos and place them beside each one of them.
    Note : The Anchor icon is not displayed in Preview/Published output. It is only for design mode. But the functionality will still work.
    Hope this helps.
    Regards,
    Sachin

  • How come I could not download anything today?  It keeps saying my app is not available in the US store and that I must first switch to Philippine store.  But I have long been using Philippines as my location.  Pls help me.

    How come I could not download anything today?  It keeps saying my app is not available in the US store and that I must first switch to Philippine store.  But I have long been using Philippines as my location.  Pls help me.

    Try going to the bottom of the Featured tab in the App Store app on your device and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select the Philippines.

  • I need to translate a flash program with many pages to edge animate CC. Is there an easy way top build new pages, so that you can jump from one page to another withion the same file?

    I have only seen in all the examples in books and on the net that edge animate works on one page only. Maybe I hve not fully understood the concept, but in flash it was easy. Perhaps there is also an easy way in edge animate?

    You can either make a symbol for each page in the same composition or you can use edge commons composition loader to load several compositions into the same composition which serves as a container.

  • Is there an easy way to create 2 page imposed PDFs with a background?

    I have figured out a way to create a suitable imposed single page PDF using the 'import as layer' action, the action only understands a single paged background PDF.
    In other words, I have a PDF that has the suitable marks on it with the pages marked 'Page 1' & 'Page 2'. This is the background PDF.
    I open this PDF in Acrobat and run the action that places another PDF (the 'Source' PDF) on multiple layers with different offsets.
    The original (template) PDF is 2 pages & the Source PDF for imposition is 2 pages, and even though the 'import as layer' understands that the source PDF being imposed is 2 pages, it does not seem to allow the original (template) PDF to be seen as 2 pages.
    There is a 'Target page number' option in the Preview area, but that is grayed out at 1.
    So...other than commercial applications, is there an easy way to build a 2 page PDF imposition file??
    Maybe a script?

    Sabian,
    Yes, the Quite software would be perfect, especially the 'Hot'. Tested & works great for us, but the price tag for the 'Hot' is rather steep for our relatively simple process......background template with a 'step & repeat' of the 'live' document.
    As I mentioned in the original post, to do this with a single page PDF is simple enough using an action that places the 'live' doc multiple times, but the vast majority of our publications are 2 pages.
    Currently runing the action twice for each job. I would save a bit of time if this could be automated to do both sides with one action, or one script.

  • I updated to firefox 7, but only after i updated did it tell me that it isn;t compatible with mac os 10.4.11.... how do i get an older version back?

    when i was on the website, it just said there was a newer version, so i updated, now firefox won't work.. how do i get an older version?

    You can find the latest Firefox 3.6.x release in all languages and for all Operating Systems here:
    *ftp://ftp.mozilla.org/pub/firefox/releases/latest-3.6/

  • Numbering.....must be an easier way?

    I am currently undergoing a small project, for a farming company, producing numbered potato cards that are used to differentiate between pallet stocks.
    These cards are very basic black text, with a number (previously imprinted using a morgana rotary numbering machine, post press) the trouble is with these rotary numberers the numbers are small and faded, so i would like to print these numbers digitally, to keep them large and clear to read. The rest of the text on sheets is printed digitally so i was hoping to just add the number to each card and print in one pass.
    So... my question is... is there an easier way in indesign than manually typing each number into the necessary box, i have 4500 cards to number so i am looking for the most efficient way to do so.
    I am using Adobe CS4, on a G5 imac 10.6.4.

    P Spier wrote:
    Using Data Merge you set up the tempalte page with independent, not threaded, text frames, and put all the labels on the page (this will be a single record per page merge). Each record will contain the same quantity of numbers as there are labels on the sheet. It's up to you how you arrange those numbers.
    I like to set up a spreadsheet for the numbering. For example if you need 240 labels 8-up, that works out to 30 sheets. That means you need a matrix on the spreadsheet of 30 rows and 8 columns. Inthe first column number down from 1 to 30, in the second from 31 to 60. and so forth. Excel can autofill boththe coumns and the rows, so if you type 1, 2, 3 into the fisrt column, excell can fill it the rest of the way to 30 just by dragging. Do the same thing for the second column, the select the two columns and drag to the right to fill the rest of the table (Excel needs enough data to establish the pattern, but then can do the whole table at once). Add a new row at the top after filling to hold the field names for the data merge, and export to .csv. Use the .csv file as the source for the merge, drag one field tag into each of the number frames, and run the merge. Your labels will be sequentially stacked after cutting.
    The key to this method is doing the calculation to get the correct number of rows to handle the total count.
    Um... Doesn't the output equipment play a part? If the print device can or can't print last-to-first, wouldn't that affect the required numbering sequence; i.e., create the CSV in ascending or descending order?
    Regards,
    Peter
    Peter Gold
    KnowHow ProServices

  • Clipboard huge mistake MacBook Pro - saved a critical message to clipboard, sent message, site had error, copied "contact us" address and oh, no, no, no my Message!  Please tell me there is a way to find it somewhere in this computer.

    Hi!  I am a recovering from  chemo patient -- lots of pain and can only sit for short periods as well as off and on brain fog yet I am alive and this is good.  It took me 3 hours today to write a very important concise yet detailed and to the point message to a doc today using the hospital patient portal messaging system.  I felt fantastic that I did it and I got it done and I did it well.   That was a big deal for me at this point in healing.  Just for any "in case" situation I did a "save" (to the clipboard) of my message before pushing  "Send".  I received the message: "Thank you!  Your message has been sent."  Then I called the doc office to let them know and while the phone was ringing I noiticed "where's the message?" and "Oh, no, no, no, it's not here!"  I hung up.  I looked under Help, read, decided to do "contact us" using my yahoo acct. instead of mail, I copied the address.  Then it hit me -- Oh no, no, no, I did not just overwrite 3 hours of off and on writing of a very important message with a puny email address, did I?! 
    I searched using Finder, via the Library, via Clipboard, via this and via that -- the only thing I saw that was at the same time I had "saved" the text to the clipboard was under cache.db,  and under type it said a document. I have no idea what that is or how to open it and when I selected it there was the message to go to the APP store or use an existing program/application and I have no idea what to chose.  I don't even know if that might be what I saved to the clipboard before I made my great faux pas.
    Could anyone please help me?  Am I looking in the right place?  Is there a right place? 
    When I do a Finder search for Clipboard the last entry was earlier on the 16th.  I did this on the 17th.  Under cache under library is the only matching time.
    I don't think I have it in me to rewrite (let alone remember) that entire letter (message) .
    I will be ever so grateful for advice, for how-to; oh please, there must be a how-to -- those words didn't just disappear into non-existance, right?
    Thank you for your time, for reading all of this and for any assistance. 
    So sincerely,
    Melinda

    Hi adam26, 
    Welcome to the Sony Community! 
    We certainly empathize with your frustration and we apologize for the inconvenience caused. Please check your other thread here, we saw someone from our customer relation department already responded to your inquiry. Again, we sincerely hope to seek your kind understanding on this matter. 
    Regards, 
    Dave 

  • Using Office 365 - I accidentally deleted the autosaved version of my notes for class. Please tell me there's a way to restore this document!

    I accidentally deleted the autosaved version of my notes from Office 365 Word on my Ipad, is there a way to restore this document?
    Please help!

    You can do a shape rather than a plain path, and apply a stroke there. But, just plain vanilla; no fancy brush tips or scatter or anything like that.

Maybe you are looking for

  • What is the deal with ReiserFs?

    What exactly is the deal on ReiserFs? ALL the literature I read on it leads me to believe it is an excellent, fast, secure, stable and best Linux file system, by a significant margin. However, whenever it is mentioned in these forums, it is almost in

  • Kein Airport bei Macbook Pro 10.7.5

    Hallo, habe ein Prolem. Und zwar möchte ich über WiFi zu Airport "Internet freigeben. Normal geht man ja wie folgt vor: 1. Systemeinstellungen 2.Freigaben 3.Internetfreigabe 4. Über WLan via "AIRPORT" das Problem ist das der Airport reiter nirgens au

  • R3Setup.bat Error " This platform not supported"

    Dear All, I am trying to install SAP R3 4.6C I have installed SQL2000 server and SP4 On windows 2003 (x64)server When I run the R3setup.bat , I receive a error message on the screen like "Thsis platform is not supported". 1. I have not installed J2sd

  • For Retina users, do you use iWork or Mac Office

    For those of you who have the Retina Macbook Pro, do you use the newly updated iWork suite, or do you embrace the bluriness and use Mac Office 2011?

  • VoIP for iPhone

    I was just informed by someone about a VoIP's for iPhones..well here is my problem..i don't get service at my house and probably never will so i am looking for a VoIP that allows it so i can receive calls via wi-fi and my in home wireless internet..i