Please use the convert anchor point tool on an anchor point of path

whenever i try to pull out a path i get this error
i'm new to illustrator

Hello,
Could you please check if you do not have 'Snap to Grid' turned ON and 'Snap to Point' unchecked in the View menu? If yes, please turn ON 'Snap to Point' or uncheck both. Please let me know your observation.
Regards,
Dhirendra

Similar Messages

I am getting this message: "Please use the add anchor point tool on a segment of a path" -- need help!

Hello guys,
I am new to illustrator and am trying to trace one of my scanned sketches on Illustrator CC. I have been watching tutorials on Youtube.com and have followed every step, but when it comes to using the pen tool, I receive a pop up message reading, "Please use the add anchor point tool on a segment of a path." I researched Adobe forums and came across another discussion with someone who had the same problem. After making the changes that people suggested to the other person's discussion, the problem still occurred with me. I am still getting the same message even after making sure I have deselected Snap to grid, etc. Can anyone please help me out!?

It sounds to me like you're using the Add Anchor Point tool instead of the Pen tool. If you are trying to trace a scanned sketch, you'll be creating content from scratch in which case you want to use the Pen tool. The Add Anchor Point tool can only modify an existing path, it can't create one. Switch to your Pen tool and see if that helps.

Does the Bone tool work with strokes created using the pencil or line tools?

I have a working bone rig in a document(CS4) that I created using a SINGLE pencil stroke, and applying the armature to it. Object drawing was off and it was a single piece with no part being a symbol. This was accomplished TWICE for two stick figure arms.
However, when I tried the same thing in a new document, I couldn't apply bone to the pencil stroke or the line stroke. After going back into the earlier document(where it was still functional) I tried creating a new armature using the exact same technique. But this time Flash wouldn't allow it.
Having failed every additional attempt, I'm wondering if Flash may have glitched somehow the first time, allowing this to work when, typically, it doesn't. Or could I have possibly missed a step somewhere that caused it to fail each attempt at a recreation.

I agree, it is sometimes difficult to click the sweet spot. Here are 3 suggestions:
Pay close attention to the cursor icon. It will change when you're over an anchor or direction point.
Try turning on "Smart Guides". They can be a nuisance, but sometimes they're helpful.
Use the "Convert Buttons" on the Options bar. They may take a bit longer but they're full-proof, plus, you can convert or delete multiple selected points simultaneously using this method.

Lightroom 4 and 5 my program constantly freezes while using the crop and straighten tool

In both Lightroom 4 and 5 my program constantly freezes while using the crop and straighten tool with horizontal images. Im running Lightroom on a Quad-Core Intel Xeon Mac with 32 GB of memory with OS 10.8.4, this problem has gotten worse and worse to the point where the crop tool is unusable. Please help!

Alright,
no replies so far! Anyways, here's some more information which is leading me to the conclusion that the bug causing the effect described above is a combination of Apple's SMB implementation of Mavericks and the way Lightroom is actually using SMB network access:
I did another trial by connecting a USB hard drive to the USB port of my router (Netgear). The connection is quite slow, but moving one of the folders in question (see my 1st post above) to the shared drive connected to the Router made Lightroom on my Windows machine to see the photos again, when I told Lightroom where to find the moved folder!
Everything was working as expected, on the Windows machine again! Moving the folder back again to the Mac Mini fileshare was causing Lightroom on the PC to get blind again for the pictures trying to sync or import. However, accessing and modifying a photo was possible again, like it was before the trial. So it's only the sync and import function having a problem!
I also did some trial in re-building ACLs and access rights on the file server with no luck. So there's got to be a functionality in sync and import of Lightroom which is using a certain SMB feature which is not supported by Apple's SMB implementation!
Any thoughts or hints?
Thanks!

So how long does it take to load a 160GB iPod using the Convert Higher ...

I have a 160GB Gen 5 that I bought when first released back in the day when they were $400. Through a number of changes, the most recent being the advent of the Convert Higher Bitrate Songs to 128bit AAC feature, I decided to look at what more music I could store. After all was said and done, I ended up with a bit of a disaster with cover art not being properly applied to the music being played. I decided to *restore the ipod* based on suggestions in the discussion boards, and equally important was following the hints and tips here.
http://www.samsoft.org.uk/iTunes/grouping.asp
The advice is especially important in very large library situations to ensure you have uniqueness in the albums you want to display. Hadn't really given it much thought until I had the ability to see the individual albums for the 40K songs on the iPod via the cover art view.
Finally the point of the post...
*So how long does it take to load a 160GB iPod using the Convert Higher Bitrate option now available in iTunes 9.1?* The specs on my computer are not highend by any stretch, but it's no slouch, and neither of the CPUs are ever pegged. At this point I've lost count of how much time it's taken, but the load is going on 3-4 days. With some breaks in between because I need to check each incremental load to verify there is no cover art corruption, correct bad tags and such, but for the most part the loading is visibly slow, and I'm sure the conversion is the cause. I'm not really complaining at this point, but there is clearly room for improvement. And of course unless there is a redo involved in which case I will get quite cranky.
*I would like to hear the experiences of others.*
Finally to lend a bit more credence to the performance concern, my 32GB iPhone 3GS for only about say 28GB of music takes about 24 hrs to load from a 2.2GHz dual core intel laptop, again using the convert higher bitrate option.

With AC power adapter it takes 3-4 hours for a full charge. With the USB charger it takes 9-0 hours for a full charge. I am not happy with them removing the AC charger and other accessoreis at all. It's business but it still stinks.
I know I would rethink my purchase but would most likely end up buying the Micro anyway

How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
Does anyone have a solution?
Thanks in advance.

Thank you very much. I'll be waiting for you message.
Messaggio originale----
Da: [email protected]
Data: 26/01/2015 17.56
A: "Umberto Gangi"<[email protected]>
Ogg: How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
    created by Gilad D (try67) in Creating, Editing & Exporting PDFs - View the full discussion
Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
     If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
     To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
     Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Please introduce the best way to create education in share point

Hi
I want to use chm in share point. but i suppose that there are better ways for training because i think chm is suit for software that are windows-based not web based.
please introduce the best way to create education in share point
thanks

Hi
these are some directions which will help to create a project for your needs
Record and share grades with students and parents electronically.
Create online communities for teachers, administrators, and students to collaborate.
Facilitate sharing of best practices among teachers and administrators.
Enable students, parents, faculty, and administrators to access your institution's resources anytime from any connected device.
Post lesson plans, research content, coursework, and more to online document libraries.
Provide Web-based class registration, lunch ordering, and other services.
Create dashboards that show up-to-date student performance data to inform instruction and decisions.
Share information with your district personnel, school board, parents, and community members.
Romeo Donca, Orange Romania (MCSE, MCITP, CCNA) Please Mark As Answer if my post solves your problem or Vote As Helpful if the post has been helpful for you.

VTO-4400 No database has been discovered. please use the enterprise managem

Hi,
I am new to Oracle Enterprise Manager. I just installed Oracle8i on Windows 2000 Server. I am connecting to OEM as sysman. When i try to open database applications (e.g. Tools - Database Applications - DBA Studio) from Oracle Enterprise Manager, it gives error:
VTO-4400 No database has been discovered. please use the enterprise management console to discover atleast one database before starting the application.
Can anybody tell me how to connect to the database?
Thanks,
Prutha

Having said all that, a colleague has suggested we just limit the amount of RAM available for the EX2010 DB cache
Then it won't have to start releasing RAM when the backup runs, and won't throw SCOM alerts
This attribute should do it...
msExchESEParamCacheSizeMax
http://technet.microsoft.com/en-us/library/ee832793.aspx
Give me a shout if this is a bad idea
Thanks

I am trying to use the new iwork beta tools on iCloud. I currently have 10.8.4 OSX on my iMac and 6.0.5 version of Safari, but when I try to open documents on my iphone in the cloud it tells me my browser isn't supported

I am trying to use the new iwork beta tools on iCloud. I currently have 10.8.4 OSX on my iMac and 6.0.5 version of Safari, but when I try to open documents on my iphone in the cloud it tells me my browser isn't supported

Note that iWork for iCloud is only designed for PCs and Macs > http://support.apple.com/kb/HT5779
To access to your iWork documents on the iPhone, install Keynote, Numbers or Pages from the App Store

This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account.

I am not able to send out an email. I keep getting the following message: This message could not be delivered because your SMTP settings are not set. Please use the Accounts Preferences panel to set the SMTP options for your account. Can someone help me with this?

We need some information, starting with the email provider (eg. Google, Yahoo, Bellsouth, etc)

Hi i just bought an Iphone 4s and every time i try to activate it It stops half way through and says the sim carrier is not supported please use the sim that came with this phone (which i am doing) and will not let me skip this and will not activate??/

Hi just bought an iphone 4 today tried to activate the phone and it won't let me..I go through language ect and it says activateing iphone may take a few mins then just stops and message on screen says that the sim carrier is not supported and please use the sim which came with the phone(which i am..& have tried another sim and still not working)........It wont let me bypass have tried reseting phone and restarting it nothing helps????

Your iPhone is locked to the original carrier who sold it
Only they can unlock it
The sim the iPhone refers to is the one the iPhone is locked to
You will have to contact them

How do you connect lines for a drawing in order to use the live paint bucket tool?

Hello! Im fairly new (okay not really) to using adobe illustrator
I used the Image trace tool to outline this drawing of Captain America but unfortunately the lines arent connected and therefore
messes up my colouring completely when I use the Live Paint Bucket tool.
Is there a way to connect the lines so they are closed when I colour it? Or is there another way to color this drawing?
Help would be greatly appreciated!

Those gaps are very wide. Draw some paths and apply no fill, no stroke to them.
Then make the live paint. In case the live paint already exists, you can go into isolation mode and then draw the paths. Or draw them and use Object > Live paint > Merge

When I try to open itunes it says; This version of itunes has not been correctly localized for this language. Please use the English version. How do I fix this problem?

When I try to open itunes it says; This version of itunes has not been correctly localized for this language. Please use the English version. How do I fix this problem?

Hey KEBENNETT,
It sounds like you've restored Windows on your PC and iTunes is no longer opening and running normally.
I'd recommend using the instructions found at step 4 and 5 in this article to repair or remove/reinstall your iTunes installation:
Issues installing iTunes for Windows - Apple Support
All the best,
Jeremy

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Using the content aware move tool, I want to move an item from one image to another image but it does not seem to work. I think I need two layers on one document so how do I do this

Good day!
A simple Paste does not work for you?
It should place the clipboard content as a new Layer which you can then move around.
If there is any chance that the elements need to be scaled, rotated etc. I would prefer to place them as Smart Objects (File > Place …) and do the masking that is specific to the images themselves in those.
Regards,
Pfaffenbichler

Discover: error: The file /a.out was linked by an older link step. Please use the latest compiler to do the link.

Hi,
I have installed Solaris studio and wanted to use the memory analyzer from there. I am trying it on a sample program, but it returns the above error and does not instrument the executable. Could you please help me tracing where am I going wrong.
# which cc
/opt/SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/cc
# /opt/SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/cc -V
cc: Sun C 5.12 SunOS_sparc 2011/11/16
# cc -g -O2 test.c
# file a.out
a.out:          ELF 32-bit MSB executable SPARC32PLUS Version 1, V8+ Required, dynamically linked, not stripped
# ldd ./a.out
        libc.so.1 =>     /usr/lib/libc.so.1
        libm.so.2 =>     /usr/lib/libm.so.2
        /platform/SUNW,Sun-Blade-1500/lib/libc_psr.so.1
# /SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/discover -w - ./a.out
discover: error: The file /a.out was linked by an older link step. Please use the latest compiler to do the link.
Regards,
Vikkal

ok. Thanks for the info.
Could you check if a small test works on your system ?
You could use this test :
% cat a.c
#include <stdio.h>
#include <stdlib.h>
int main()
        int *x = (int*)malloc(100);
        printf("x[0]=%d\n", x[0]);
        return 0;
% cc a.c -g -xannotate
% discover -w - -o a.out.disc a.out
% ./a.out.disc
ERROR 1 (UMR): accessing uninitialized data "*x" at address 0x8090008 (4 bytes) on the heap at:
        main() + 0xc2 <a.c:8>
                 5:    {
                 6:     int *x = (int*)malloc(100);
                 7:
                 8:=>   printf("x[0]=%d\n", x[0]);
                 9:
                10:     return 0;
                11:    }
        _start() + 0x71
    was allocated at (100 bytes):
        main() + 0x5e <a.c:6>
                3:
                4:    int main()
                5:    {
                6:=>    int *x = (int*)malloc(100);
                7:
                8:      printf("x[0]=%d\n", x[0]);
                9:
        _start() + 0x71
x[0]=0
***************** Discover Memory Report *****************
1 allocation at 1 location left on the heap with a total size of 100 bytes
    LEAK 1: 1 allocation with total size of 100 bytes
        main() + 0x5e <a.c:6>
                3:
                4:    int main()
                5:    {
                6:=>    int *x = (int*)malloc(100);
                7:
                8:      printf("x[0]=%d\n", x[0]);
                9:
        _start() + 0x71
DISCOVER SUMMARY:
        unique errors   : 1 (1 total)
        unique warnings : 0 (0 total)

Please use the convert anchor point tool on an anchor point of path

Similar Messages

Maybe you are looking for