Please wait, Preload Customizations in progress.....

Hi,
Recently, my hard drive died on my T61 ThinkPad. I have received a new hard drive from Lenovo and having followed all the instructions to install the 4 recovery DVDs that came with the hard drive, I have now reached a stage where the screen reads:
"Please wait, Preload Customizations in progress.....". Now I do realise that this process is very time consuming but can someone reassure me that nothing is wrong and I should be prepared to wait for as long as it takes?
Any help will be highly appreciated.
Many thanks,
Dadzi

As far as I can tell from my experience depending on your hardware it may take arounf 3 hours or more.
Hope everything is allright wiht your machine as I write.
Cheers!
ThinkPad T500 2242-CTO P8600 / 4GB RAM / WSXGA+ / HDD Fujitsu 7200rpm 1TB / 6 Cell Sony / Windows 8 Pro 64-bit
ThinkPad Tablet 2
ThinkPad X61s 7669-3KG Windows 7 Home Premium 32-bit

Similar Messages

Import in progress (97%)... Please wait

Hi all
I created a portal Transport { epa file } from my development system and imported the
same successfully into my IT system
I again tried to import the same EPA file into my QA system where , the import wasn't successful nor fail.
Once I click on the import button ( with Override option set to ALL ) , the import begin as normal and proceed
to different level..... say from 10 to 20 % and then to 45% and finally it reach 97% , at which it keeps on spinning..
<h3 > ** Import in progress (97%)... Please wait ** </h3>
I tried the option of importing the EPA file from server as well as from local client , in both case i see the same behavior.
Any pointer over this would be really helpful.
Thanks

Hi Kumar,
I've got the same issue.
This only happens with transport packages which contain remote objects from a Producer Portal.
Have you found a solution for this?
The behaviour is that when you import a transport package, it seems to lock all objects at runtime when importing.
Thanks very much for reacting!
Kind regards,
G. Leurs

Unable to synch. Now in my 4th day of trying. Please help! cant get passed "operation is in progress. please wait"

Hello All,
I was getting a numbered error message and followed the instructions on: http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Error-Code-0x8004fd2b/td-p/96430, as it had worked for everyone else on that thread. Unfortunately for me, it caused a different problem (and I'm still not able to sych).
Now when I go to sync, it says: "your organizer data isn't configured for sychronization" then it says "click configure to ..." but when i click configure, and then click configure settings (under synchronization settings in the organizer tab) , it just says "operation is in progress. please wait" but after 1 second it stops and nothing else happens.
I just went from 5.0 to 6.0 thinking it would help, but no luck. T-Mobile customer support is of no help. Ive been working on this for 3 days now, if somebody could help, that would be really greatly appreciated

Please take a look at Running Nested VMsRunning Nested VMs which contains the information required to run virtual ESXi hosts. It's likely "Expose hardware-assisted virtualization to the guest operating system." which is missing in the ESXi VM's configuration.
André
PS: Discussion moved from vSphere 5.1 to Nested Virtualization

Launching VB6 Editor after installing Visual Studio 2013 results in "Please wait while Windows configures Microsoft Visual Studio..."

I have had various versions of Visual Studio installed beside Visual Basic 6.0 Enterprise for some time with no problems, most recently Visual Studio 2012 Premium.
I recently installed Visual Studio 2013 Premium, and now every time I open VB6 I get a dialog that says "Please wait while Windows configures Microsoft Visual Studio Professional 2013" that shows a progress bar. After it finishes (30 seconds or
so), it launches again and again and finally VB6 will open. This happens with each instance of VB6, regardless if I've already done it once and never run VS2013 in between.
If I cancel the dialog, I get this error message in a dialog: "Error 1712. One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible." Several more "Please wait"...
dialogs will appear and if I continue to cancel, eventually I'll get the VB6 editor. It appear to work fine despite the error messages.
It seems to me that the VS2013 installer flagged some dll's or other files to be rolled back whenever starting VB6. It doesn't appear to be necessary, and I'd like to avoid playing the "Please wait" wack-a-cancel-button game before launching each
instance of VB6 (or waiting several minutes for no reason). So how do I fix this?
Note: I've seen something similar happen in Outlook on a different PC when upgrading from 2010 to 2013. The same sort of "Please wait"... dialog would appear each time I opened Outlook. Judging by the "similar" questions that popped up when
entering this forum post, I'd say this is a general problem with upgrading older versions or installing newer versions of major Microsoft software side-by-side.
/* Don Reynolds */

I found the answer!
I was having the exact same issue, and I was search for a solution and I happened across the following thread: http://social.msdn.microsoft.com/Forums/en-US/f4b0fd38-f4f9-41ea-bd8d-834203a175d2/building-visual-studio-2010-project-triggers-please-wait-while-windows-configures-visual-studio?forum=vssetup&prof=required
Scroll a small bit down, and there is a post by Barry Wang explaining that you need to use event viewer to find out what is missing. Anyway, I opened event viewer, then open VS 6, then hit refresh in the event viewer (under Windows Logs -> Application)
and saw a warning message from MsiInstaller. It gave me the following message:
Detection of product '{9C593464-7F2F-37B3-89F8-7E894E3B09EA}', feature 'Visual_Studio_Professional_x86_enu', component '{E3FF99AA-78B9-4A06-8A74-869E9F65E1FE}' failed. The resource 'C:\WINDOWS\Microsoft.NET\Framework\URTInstallPath_GAC\' does
not exist.
I opened an elevated command prompt, I navigated to the C:\WINDOWS\Microsoft.NET\Framework folder and verified that 'URTInstallPath_GAC' didn't exist, and then I did "md URTInstallPath_GAC".
Closed and reopened VS 6, and it instantly opened - no "Please wait" message.
Now this may or may not be the same problem you are having (problem is - I have had it happen on two separate computers now with VS 6 and VS 2013 installed), but it should point you in the right direction. In fact, you should be able to use the Event Viewer
for anytime the "Please wait" message shows up for any application, and then once there find out what is really missing.

"Project "name of project" is in an inconsistent state. Please wait...

I seem to be encountering a slight issue with Aperture, where it 'hangs' a dialog comes up (this has happened twice on 2 seperate occassions) where the dialog explains :
"Project "name of project" is in an inconsistent state. Please wait while the inconsistencies are resolved."
there is a cancel button, but it is greyed out. the progress bar is turning, but no progress is indicated. it stays like this and has done for a while. the only thing to do is force the app to quit and restart.
has anyone else had this happen or does anyone know why it is doing this?
I look forward to some replies.
Paul.

I had something similar happen and the easiset way for me to fix it was to go into the aperture library (right click, select show contents), locate the project in question and trash it.
One thing you need to make sure is that Aperture isn't running. When it starts up it may notice an inconsistancy with the database and rebuild it. Once done (takes only a few seconds) you're all set.
just in case, backup the file, either by copying it to another drive or folder.
Mike

Maintenance Wizard appears to hang: Execution Started: Please Wait

I have a customer using the following navigation route through Maintenance Wizard:
Process: Prep for Upgrade
Select: Task:Apply AD Minipack
'Start the Run'
However the next page seems to hang with:
Script Executer: Execution Started
'Confirm that "Execution Complete"message appears at the end of this page.'
Please Wait.
Can anyone advise what could be the problem or how to get additonal errors to diagnose the problem.

It took about 8 seconds for me. Not too bad at all.
Jo
"crazykeith" <[email protected]> wrote in
message
news:g0c7rs$d27$[email protected]..
> Hello. I'm trying my first Flash Video insertion..all is
well except I'd
> really like to be able to tell anyone viewing the page
to please hang on
> and
> wait during the buffer period on the progressive
download. it takes
> anywhere
> from 5 to 20 seconds for the player skin to appear and
start playing the
> video.. I have previously been using embedded WMP which
seems to have an
> advantage in this department since the player skin would
immediately
> appear and
> display a buffering video % which would let anyone
viewing the page know
> that
> the video is downloading and is about to play. With the
flash they have
> no
> idea and the page appears not to be working for a "long"
time (5 to 20
> seconds)
> since not even the skin appears. Is there a way to
improve these faults?
> My
> video is about 3 minutes long and can be found here.
>
http://www.centroidcnc.com/cncvideo/cnc_cylinder_head/cnc_cylinder_head_porting.
> html
> thanks ahead of time for any advice! -Keith
>

InfoView Errror - Please wait while the document...

Hello, I am looking for some assistance as I am stumped on this. Very recently we have had an issue come up on our InfoView site when people attempt to run a report a progress windows comes up saying "Please wait while the document is being processed." I have gone through many checks to try and troubleshoot but nothing has worked, tried various browsers and versions, java versions, removed windows updates from the server and updated the Crystal Server to 3.1 SP4 and none of helps. It just sits in and endless loop with that error on the screen. I am open to ideas, any suggestions?
Rod

Hi Rod,
Please follow the steps provided below, it might help you.
1.Open Report in Crystal Reports Full Client
2.Click File/Page Setup
3.Click "No Printer" -- This will force the report, when run on the server, to be set automatically to the default printer, instead of looking for the printer driver that was set up on the client machine where the report was developed
4.Click "OK"
5.Click on File/Report Options
6.Remove the check mark from "Verify On First Refresh" and "Verify Stored Procedures On First Refresh" -- This will force the report to skip the process of querying the database to verify metadata information
7.Click "OK"
Let us know if this works for you or not.
Thanks,
Kuldeep G

Display a "Please wait " message

Is there any way a message can be displayed to advise the user
"Please wait - program running...."
while the macro actually executes.
Function such as MSGBOX just stop executing - I am looking for something that will alert the user to be wait while the program runs.
many thanks
Peter

Reshma,
The MsgBox will block the thread and the program (macro) stops running until you close the message box.
Peter,
You need to run another thread to get things working as you need. Typically the job is launched on another thread while the user sees the message box with a progress bar or just a text message like you want. You need to develop an Office add-in
for that, see
Walkthrough: Creating Your First Application-Level Add-in for Excel for more information. The
BackgroundWorker component can be used for that.

How to create 'Please Wait' inside of CFWINDOW?

Folks,
I'm trying to figure out how to create a 'please wait'
display while the contents of a cfwindow loads. Any suggestions?
Samples highly appreciated.
thanks,
/r

Hello,
According to your question this would be a progress style form. The first link shows an example for copying files (and there are some builtin methods and this is not meant to replace them) while the second link shows how to work with loading a database on
form load.
I did both with specific things in mind but you can go in other directions too.
https://code.msdn.microsoft.com/Copy-files-while-keeping-da349a4f
https://code.msdn.microsoft.com/Practical-Asynchronous-ebd00ae1
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Need Help ASAP my State tax form is in a PDF file and the attachment in my email says Please wait

Need Help ASAP my State tax form is in a PDF file and the attachment in my email says Please wait...
I tried downloading updates like it said to but it still will not display the document. How do I print the PDF file ASAP

Can you give us a LOT more info?
What email client? What version of Reader (I can only assume you even have Reader at this point)?
Please wait? I'm sure it says more than that, right?
Have you tried simply saving the PDF (it IS a PDF correct?) to your desktop and opening it from there?
Did you get this form from the IRS or did it come from somewhere else? If the IRS again, what version of Reader?
Help us help you.

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks

Is there a setting to automatically close the "please wait while we generate your document" page that pops up when downloading a pdf file?

I am constantly downloading pdf's and excel files from our company software which uses a web browser to access it. When I download a file, firefox generates a full screen pop up window that states "please wait while we generate your document." My problem with it is the fact that pop up window does not close after the download. I have to manually close the window. Is there a way to set that pop up window to close automatically after the file has finished downloading and is open in foxit reader or excel or word or whatever?
Thanks,
Tony

Hi,
You could try is to '''Disable''' the Foxit, Adobe and Office '''Plugins''' in '''Tools '''('''Alt '''+ '''T''') > '''Add-ons''' and use the normal Firefox Open with (when you click on a link) to browse/open it in the required application.
[https://support.mozilla.org/en-US/kb/Using%20plugins%20with%20Firefox Using plugins]

No more than 1 sessions at a time are allowed. Please wait until open sessions expire.

I have been unable to log into my Actiontec MI424WR router this week, The router returns the message "No more than 1 sessions at a time are allowed. Please wait until open sessions expire." every time I try to log in. This has been going on for days. Even pulling the power to reboot it did no change. I'm the only user in the household that would log into it, so I don't understand how this could occur. How can I get in?
GLN2

I really don't want to do a hard reset as I have a handful of custon port forwarding rules that I had created. I'm not a wiz at that, so it would take me too much time to re-create! I may have no choice. Next time I can get in I will try the backup of the config file. I hope it contains the port forwarding rules.
The backup function should work fine, I have used it to save my Steam port forward rules to my hard drive, after a pin hole reset I was able to restore successfully. I did configure mine to 1 session & ALWAYS logout when I am done. I have never had any problems logging into the router. But in your case you may need more than 1 session allowed.
Are you using a native or 3rd party app to remember your router ID/password? IF you are do not do this, you are "defeating" the built in security of the router
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

My ipod wont charge right and is telling me to charge please wait

I wonder if any of you can help me. My 160 GB ipod classics battery doesnt appear to be charging, and now it simply wont connect to the pc or itunes. When i plug it into the pc it comes up with the battery at red, a caution sign infront of the battery and it reads charging please wait. When i unplug it from the pc it says connect to power so this leads me to believe that it isnt the wire itself. I have tried charging it with a plug (with the same wire as it was needed for the plug) and again it says charging please wait. I've left it in for an hour at a time. This happened yesterday but eventually it retained some small charge and allowed me to listen to it for 3 hours. The battery was fine this week and last week. Does anyone know whether there is something i can do to try and fix this problem

Hello joan marie\'s ipod,
Thank you for the question. You can safely eject your iPod using these steps:
To eject iPod:
Select your iPod in the iTunes Source list.
Click the eject icon next to the iPod in the Source list or choose Eject iPod from the Controls menu.
You can find these steps and additional ways to eject your iPod in the following article:
Safely disconnect iPod
http://support.apple.com/kb/ht1853
Thank you for using Apple Support Communities.
Best,
Sheila M.

Hi i was in the process of uploading photos from my phone three days ago- and have tried to re start my computer but cannot get out of " Photos are being import to photo library please wait for import to complete"there are 90 photos and this came

Hi I was in the procces of uploading photos from my phone three days ago as i have an important art project to finish today. I have tried to restart my computer log off come back on but every time i put my phone to the computer and press up load photos its comes up with "Photos are baeing import to photo library- please wait for import to complete".
There are 90 photos and this came after it uploaded a few - can you help me - i have tried to quit iphone but this keeps coming up and i need these pics imported from my phone to my computer.
please help
thank you

Apple menu ==> forec quit
LN

Please wait, Preload Customizat​ions in progress..​...

Similar Messages

Maybe you are looking for

Please wait, Preload Customizations in progress.....