Please would you describe the mathematical routines and algorithms that are employed within the �pulse parameters� sub-routine of Labview?
A Quick response would be much appreciated.
Kuo,
The method used in pulse parameters can be found on the help page for this VI. You can find this page by opening help and navigating to VI and Function Reference>>Analyze VIs>>Signal Processing VIs>>Time Domain VIs>>Pulse Parameters. Click the Details link on the top of the page for an explanation of what this VI is accomplishing.
Regards,
Matt F
National Instruments
Keep up to date on the latest PXI news at twitter.com/pxi
Similar Messages
-
How do I get my iTunes library to show the same playlist order and songs order as what is on my iPhone 4s.
Drag it to an external drive or directly to the other computer, and if needed, launch iTunes with the Option key held down and choose that library. If it contains rented movies, those won't play on the desktop Mac.
(120868) -
The Title Bar and its controls are superimosed on the navigation toolbar
the Question is it. the overlap prevents me from easily accessing controls on the navigation bar. I don't understand this. I asked this earlier and got dumped because i changed all the files as requested and the problem hasn't gone away. I downloaded and installed Firefox 17 and it is still there! I also upgraded my operating system to mac OS 6.8 with no help at all. I can get you a copy of the start up reading from the console if you want. I've included a screen shot below..... wait.
I just reverted to the default persona from a musical one - the problem disappeared. Why do I get this when I add personas? Let me try others.... That is the focus of the problem! The personas for some reason exclude some of the toolbars and "shove" the title bar down onto and superimpose it upon the navigation bar. That may not make sense, but that is what it looks like from this end. Curious, though, the drop down options are still in a strange configuration, a different typeface than they were before, which happened when the personas superimposed the title bar on the navigation toolbar. So, obviously I can't use the personas. Is there a way around this, please? there is obviously a conflict somewhere, bit I can't figure it as this is a new development ever since I tried to install a new glims version for Safari and this problem appeared after that. De-installing glims did not eliminate the problem so it obviously changed something in the Firefox configuration files. The guy at glims was mystified, too. Any suggestions?
thanks.Whenever I even mouse over the pesonas in the dropdown tools menu, the title bar at top and the buttons thereupon drop down and superimpose onto the navigation bar just below it. I also have an arial or helvetica font on the right click drop downs where it was gill sans before. Just changing with the mouse-over causes this. And it still happens now that I've upgraded to MAC OS 10.8. New version 17, new MAC OS and this still happens and is not a hardware acceleration issue. I'm stumped.
What can we do? Do you want me to copy off the Firefox initiation lines from the console log? -
Can you fix the whirring hard drive noises that are heard on the Classic?
I'm aware that hearing the noises when selecting a playlist or song or browsing is normal, but to be honest, it can be a little irritating. I got my Classic for Christmas, and I have no other issues with it (no white screens, troubles calling up a song, or charging/syncing difficulties - nothing). The noises have been present since I first started using the iPod. Is there any way I can fix the whirring without buying a new hard drive?
Thank you!You might want to check out these two threads:
https://discussions.apple.com/thread/5325838?tstart=0
https://discussions.apple.com/thread/5369545?tstart=200
This topic has been discussed ad infinitum and these threads might give you some ideas on dealing with the changes. Also, as stedman1 suggested, be sure to leave Apple your feedback on the matter: http://www.apple.com/feedback/ Good luck! -
I want to use my iPad2 to make presentations created in MS Powerpoint. These have embedded videos, animations and hyperlinks. Will these all work in the spreadsheet if I use Keynote on my iPad to display and present them.
I have another problem.
I have deleted all apps from my iPhone 4s and then I have changed my
Apple ID's country information from Poland to United States.
After that, I have downloaded all deleted apps.
But only few are in 'Purchased' section on iPhone!
I guess only these, I have downloaded using USA App Store, not Polish.
I am getting frustrated, because I have got too many problems with iOS
and it doesn't look it will get better... Please help me ASAP! Thanks! -
I have an Apple Powerbook G4 with Mac OS X v10.5.8. I downloaded the new Firefox to replace an older version (v2.0, I think). When I try to go to websites via the address bar, I don't get any errors and nothing appears to be loading.
Try to create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Hi,
I am trying to understand how to access an SQL database from CVI.
I don't understand how the sample programs shipped with the toolkit can access the database they use if it is not listed in the ODBC Data Source Administrator.
In the code, I see the line:
hdbc = DBConnect ("DSN=CVI SQL Samples");
However, there is not an entry that I can find in the ODBC Administrator for "CVI SQL Samples."
The SQL help suggests there should be a User DSN named, "CVI32_Samples", but I don't see that entry in the ODBC Administrator on my win-7 system.
I believe the sample program is accessing a database file named, "C:\Users\Public\Documents\National Instruments\CVI\Samples\sql\samples.mdb".
Exactly how is the call to DBConnect() translated to the file, "samples.MDB", if there is no entry in the ODBC Administrator?
Regards,
MarkI figured it out. There is a 32 bit ODBC administrator and a 64 bit ODBC administrator. The ODBC administrator I run through the control panel is the 64 bit ODBC administrator. To access the 32 bit administrator I need to run, "C:\Windows\SysWOW64\odbcad32.exe".
I am running the samples in 32 bit mode, so I need to use the 32 bit ODBC administrator.
Best,
Mark -
I am using Illustrator CS5
Please show a screenshot of the meshes
Attribute panel: any overprints set?
What kind of PDF do you save? Which options?
Which app do you use for viewing the PDF? -
where did my photos go? I started to move a 25GB directory of all my photos to the creative cloud and now they are gone! The directory on my hard drive i gone and they are not in the cloud?
The iCloud Photo Stream only stores up to 1000 photos for thirty days. If you have more that 1000 photos or photos nearing the 30-day mark, you should export them to another device.
-
I am getting a msg that my ipad hasnt been backed up in 2 wks. I have plugged in (at 100%) and locked and connected to wifi. I can not hit the ok button and my apps are showing in the back ground. Not able to use at all. How can I get my ipad working again.
thanks,Even though the iPod shows as been connected, it might not have actually received a valid IP address via DHCP from your Wi-Fi access point or router. Head to Settings -> Wi-Fi and tap the > next to the network you are connected. If 169.xxx.xxx.xxx is listed for an IP Address, then your iPod did not receive a valid IP address. To correct this you can reboot your router by unplugging it from power for about 30 seconds.
It wouldn't hurt to also reset your iPod. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
See here for more troubleshooting assistance.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock -
Is it possible in a VBA macro to check whether an opened word document has the advanced option "Use fonts that are stored on the Printer" is set.
I have a word macro that opens and processes thousands of word documents. The processing needs to be different based on whether this option is set or not.
Thanks,
Harry Spier
Harry SpierHi Harry,
I'm afraid that we're not able to retrieve this option value. The Advanced Options are actually stored as application level. Some of the options can be accessed with the Word.Application.Options property. But there're also many options that are not
exposed in the Word Object Model. As you can see in this figure, there's no property corresponding to "Use fonts that are stored on the printer":
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Identify items that are consigned to the customer directly
pls provide the informaton about " identify items that are consigned to the customer directly"
Hello,
I believe you are on the wrong forum. Application Express is a web development tool, and from your questions you probably should look under the E-Business Suite forums (http://forums.oracle.com/forums/category.jspa?categoryID=3).
Regards,
Arie. -
Get total number of comps that are used in the opened project?
Hi everyone!
Does anyone know how i can get the total number of comps in the project-panel or the total number of comps that are used in the opened project?
This is what i have so far, however it's not exactly what I am looking for:
for (var i = 1; i <= app.project.numItems; i++) {
if (app.project.item(i) instanceof CompItem) {
alert(i);
JesBYou can get the total number of comps with pretty much what you have
var numComps = 0;
for (var i = 1; i <= app.project.numItems; i++) {
if (app.project.item(i) instanceof CompItem) {
numComps++;
You could look at the usedIn attribute of each comp to see how many comps appear in other comps, but that won't identify your top-level comp. I'm not sure how you would do that unless you just bump the count by 1:
var numUsedComps = 0;
var numComps = 0;
for (var i = 1; i <= app.project.numItems; i++) {
if (app.project.item(i) instanceof CompItem){
numComps++;
if (app.project.item(i).usedIn.length > 0) {
numUsedComps++;
if (numComps > 0) numUsedComps++;
alert("number of comps = " + numComps + "\rnumber of used comps = " + numUsedComps);
Dan -
Has anyone experienced 4G in Spokane Wa., and if so, how would you describe your experience?
Tina,
There's been a change in behaviour with FM11's Find/Change (as you've noticed). The dialog now retains focus after a search has been performed and is modal. However, the focus of the field for ctrl-F should place it in the Text area, regardless of platform, not execute the last operation. This is buggy behaviour and I just confirmed this on my platform (regardless of whether your in Doc A or B).
Please file a bug report at the FrameMaker Bugs & Wish List (https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=63) -
I had a USA itunes card in my account and now I have shifted to the UK, I would like to shift my account and change my itunes store to the UK based store but cant do it as itunes card has got some credit left about $1.30. Please help.
You can try contacting iTunes Support and ask them if they can remove the balance from your account so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
Maybe you are looking for
-
How to find out the NULL columns in the table?
Hi, Please provide the query to find the null columns in the table. Here, all rows in the table have same column as null. It won't change. Table c1 c2 c3 c4 X C 10 T D 20 I wanna find out as C2 is the nullable column. Thanks in advance !! Regards, Vi
-
Hi, Am facing difficulty in implementing folowing scenario in BW.we are trying to do Freight report. In my report, i need to display for a particular customer, type of transport,delivery quanity and freight cost. In cube or ODS, if data is stored at
-
Apple store,just wanted to check on how to change my area settings in itunes from United States to United Arab Emirates(that's where i stay).it got changed when i tried to download google maps from the US store in itunes.please help me out here.Thank
-
Extending material master for different sales org/plant combination
hi , 1 ) a material can be sold from one plant by many sales organisations. so we map this scenario in enterprise structure by the config step "assign sales org--dist channel-- plant ". (let's say sales org A and B selling from plant 1 and also sale
-
Give authorisation To User defined form
How to give authorisation to User defined form Regards, Pravin