Pleaseee help... im new costumer ,How to use the free subscription skype ?

I am a new member and would like to try using skypefrom the information I get from readingcan I use the free subscription servicebut as soon as I try and buy it ... and make calls international it doesn't work ...What should I do to be able to make calls using a free international skype subscription ?

I also have the same problem.
I cannot cancel my Free subscription anywhere on the site.
Can't find any subscriptions listed on my account, but received an email to say I had started free subscription?!
Looks like i'll get charged by Skype just because it's really hard to find things on the site!!
Any help would be great.
Thanks

Similar Messages

  • When i update apps on my iphone they need the ID that i used when i downloaded these app and i forgot this ID and a make a new ID how i used the new one to update these apps thanks

    Hello all,
    when i update apps on my iphone they need the ID that i used when i downloaded these apps and i forgot this ID and a make a new ID
    How i used the new one to update these apps?
    thanks

    Your device can hold apps from multiple IDs, but to update them you have to swicth identities which is time consuming. If possible use only the one ID. If you need to reset the password for your old ID visit My Apple ID.
    tt2

  • [svn:osmf:] 13113: Changing to not use an embedded font by default, and adding instructions on how to use the free 'type writer' bitmap font.

    Revision: 13113
    Revision: 13113
    Author:   [email protected]
    Date:     2009-12-21 01:08:10 -0800 (Mon, 21 Dec 2009)
    Log Message:
    Changing to not use an embedded font by default, and adding instructions on how to use the free 'type writer' bitmap font.
    Modified Paths:
        osmf/trunk/libs/ChromeLibrary/.flexLibProperties
        osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/ScrubBar.as
        osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/URLInput.as
    Added Paths:
        osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/
        osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/Fonts.as
    Removed Paths:
        osmf/trunk/libs/ChromeLibrary/assets/images/stop_up.png_1

    Your site was built using tables, whose sizes are defined in your site.
    If we look at your first table definition, we can see:
    <table width="861" height="1449" border="3" cellpadding="0" cellspacing="0" bordercolor="#868787">
    Your table has a width of 861 pixels and an overall height of 1449 pixels. Anything you put into that overall box must fit those dimensions, else
    it won't be visible. Anything you add above it will push everything down. You can redefine your sizing to let you edit more inside of the table elements.
    This is why, when you type in more text, things act weird. If you are in Dreamweaver, you must find the right cell to put your text into and then enter
    text there. Unfortunately, this is going to push things around, which were all lined up using tables. And this gets everything offset with respect to
    everything else in your website.
    And that is why everyone is saying, "Start Over!"
    I just inherited a website that has been put together using tables. I'm going to have to expend considerable effort in rewriting the entire design of the
    website because of that. because everything I intend to add to the pages on the site is going to need to be deconstructed in order to get it to work
    properly if I'm adding text and pictures that need to line up with each other.
    You need something done quick and dirty and the only way I can recommend you do that is to use Dreamweaver to show you the tables you have
    and put what you need in a new table that is defined above or below the tables you all ready have defined. Do that and then get back to someone here
    who knows how to make a website correctly to clean up your entire website and make it editable -- which will cost you some money, but it will be
    money well-spent.
    I like to quote this maxim: Good, Fast, Cheap. Pick any two. This works for website design. You can get it fast and cheap, but it won't be good. I
    think you may have chosen that route.

  • Please Help!!! How to use the Hand cursor on an Image !!!!

    Hi,
    I am sorry for cross posting but nobody seem to know this, i need this as soon as possible.
    I have a main Jframe which contains a Jpanel which contains a jscrollpane. THe image is in scrollpane and i would like to use the Hand cursor to move the image up and down the jscrollpane.
    Can someone tell me or show me how can i use a hand cursor on an image
    I would appreciate if someone can show me a simple example.
    THanks in advance.

    Well. I would call setCursor with a cursor of type Cursor.HAND_CURSOR or something on the Component where you want the hand. Then you could add a MouseMotionListener to the Component. in mouseDragged() you scroll the scrollpane programmatically according to the MouseEvents getX() and getY().

  • How to use the free apple id in iphone

    my iphone use the maximum free id
    i have use a different id but there are
    show the problem your iphone used the maximum apple id
    how to solve this problem
    plz send me

    The only solution is to create another iCloud account on a computer or another iOS device, then use that account on your phone. There is no other way around this limitation.

  • Want to learn how to use the imac.  is there tutorials or something that can start me off?

    is there places that can help me to learn how to use the imac to the best of its ability?

    This has tutorials  http://www.apple.com/findouthow/mac/

  • Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!

    Can anyone help me figure out how to use my new LaCie external hard drive to import movies from my camcorder into imovie '09? I ran into so many problems last night!! Was up way past my bedtime!

    I'll stay in this chat ... I answered in the other one ... I have a Sony digital Handycam ... from years ago.  I just got the LaCie and I think I formatted it for only to be used on my Mac ... how should I go about reformatting it to be HFS Extended like you said?

  • How to use the "identify" feature in new 6.3.1 airport utility?

    how to use the "identify" feature in new 6.3.1 airport utility?
    so you can find the basestations in larger networks?

    There is a workaround, which is to use Airport Utility 5.6.
    I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
    Four caveats:
    1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
    2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
    3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
    4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
    So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
    PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
    I hope this is helpful information. Took me a while to find out how to do this.

  • HT1208 Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

    Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

    Use it the same way as previously.
    ctrl B shows the menus.
    ctrl S shows the sidebar.
    What else do you need help with?

  • How do I set up my new Macbook Pro without using the annoying Voiceover?

    How do I set up my new MacBook Pro without using the annoying Voiceover?  I cannot get it to work right; it seems to get stuck and repeats the same thing over and over.  It is driving me nuts!  Is there a way to begin the setup process without using the Voiceover system?  I am a new convert from a PC and I thought a Mac was supposed to be "intuitive!" 
    Any help is appreciated.
    Thanks.
    Pamela

    There is no good reason to register your Mac anyway.
    You can opt out of the setup process and registration by pressing Command (Apple key) and the "Q" key.
    The registration process requires you to divulge a lot of unnecessary information.

  • I don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

    i don't know how to use the canlendars function and the notes are kind of messy code,anyone help me

    Step by step:
    1. On your main vi Front Panel, create your boolean indicator.
    2. On the block diagram, right click the new boolean indicator and select Create - Reference.
    3. On sub-vi front panel, create boolean indicator (or use one that is already created).
    4. On sub-vi front panel, create a reference (Controls Palette - Refnum - Control Refnum).
    5. Right click on the newly created Refnum and select Select Vi Server Class - Generic - GObject - Control - Boolean. The refnum label changes to BoolRefnum.
    6. On sub-vi block diagram, create Property Node (Functions - Application Control - Property Node). Find the BoolRefnum and move it close to the new Property Node.
    7. Wire the BoolRefnum to the reference input of the property node.
    8.
    Right click on the property node and select Change to All Write.
    9. Move mouse to point to Visible inside property node box, left click and select Value.
    10. Wire the boolean indicator from step 3 to the Value input of the property node.
    11. On sub-vi front panel, right click on icon and select Show Connector.
    12. Click on empty connector spot then click on the new BoolRefnum. Save your sub-vi.
    13. On main vi block diagram, connect refernece created in step 2 to the new connector terminal of sub-vi.
    14. Save and run.
    Here are the modified vi's.
    - tbob
    Inventor of the WORM Global
    Attachments:
    Pass_a_Reference.vi ‏20 KB
    GL_Flicker_mod.vi ‏83 KB

  • Help in how to use the controlers in Ze

    I just got the New Zen M and I am having the worse time dealing with the controllers. The worse of all is the tapping I love the mp3 but since I started to play with it (an hour ago) I just feel like throwing it against the floor since is not doing what i want it to do. Please any help or tricks in how to use those controllers I will really appreciate.

    You have to tap the keys gentle . i see you will not have your player long . this is the best out

  • How to use the LAN NetStream for peer transmission, please help, write a sample code

    How to use the LAN NetStream for peer transmission, please help, write a sample code

    No reply, I reply, Oh

  • HT1688 I am trying to find answers about how to use the earphones that came with my new iPhone 4s. Does this work similarly as a Bluetooth or do I need to still buy one. The printing in the manual is SOOO small, it is too hard to read!

    Does anyone know how to use the earphones( plugs) that come with iPhones?
    Mine is still fairly new and I am just learning how to use certain things.

    They're pretty straightforward. You plug them into the headset jack (the hole on the top left of your phone). You put the buds in your ears. All sounds, except for the phone ringing will now come through the earbuds.

  • Can you please help me figure out my i phone and how to use the features

    i need some help on figuring out my phone can you please help me figure out how to use my i phone and the blue tooth features to listen to music or how can a friend or a relative send me songs for me to listen to.....                   

    To listen to music with a headset or earbuds via bluetooth requires a bluetooth stereo headset.
    File transfer via bluetooth is not supported. A friend or relative can purchase music for you via the iTunes music store with an iTunes store gift card or by sending you the music gift via email from iTunes.

Maybe you are looking for