PLEEEEEEEEEASE HELP!!

I've had itunes on my computer for a couple of years now, haven't bothered uploading new model, has worked fine. Then all of a sudden the programme wouldn't open- said "Folder "itunes" cannot be found or created and is required. Default location is "my music" folder"
Have just installed new version of itunes- now every time I click on the icon the licence agreement comes up, I click "agree" and the same message as before comes up and I can't find the itunes folder. When I search My Computer for "itunes" it finds the folder, but again when I try and open it it won't work. Can anyone help?! Thankyou.

all of a sudden the programme wouldn't open- said "Folder "itunes" cannot be found or created and is required. Default location is "my music" folder"
the best place to start with that one is with this document:
iTunes for Windows: "Disk is locked" or "iTunes folder cannot be found" when installing or opening iTunes
... but if you run into the complication where "My Music" doesn't appear as an option in TweakUI, perhaps try the alternate technique from this Nigel Carpenter post:
Nigel Carpenter: re: Itunes problem

Similar Messages

Multiple timertasks--Please help

Hi
Got a problem here.
I want to poll some devices on a periodic basis.
The polling interval for each of these devices will differ.
So how do I achieve this?
If I create a Timertask for each of these devices,then I would be creating too many threads ,which will clog my system eventually if I get too many requests to poll multiple devices.
Please give me a solution as to how I should implement this functionality.
I read on the net that Using the same Timer with multiple timertasks will anyway create only a single thread..but I am not in a position to know how many timertasks I will have to create before I start off the timer..
Can anybody pleeeeeeeeease help??
Early reply will be appreciated.....
Regards

yes, TimerTask only spawns 1 thread.
Timertask will be adequate for your needs. (the best solution(in terms of performance) would be to write your own scheduler.)
rob,

Dropped it in the pool

i had my ipod touch ( 4th gen ) in my pocket, and took a dip in the hottub. i put it in the sun and over the air conditionor for almost 3 days, and feels completely dry. i even shook it and heard no water. i tried turning it on, but nothing happened. so, i plugged it into my pc ( dell, if it helps to know ) , but itunes didnt come up automatically like it usually does. then, i brought up itunes myself, and my ipod didnt show up under devices. i left it there for about 2 hours, and nothing changed. pleeeeeeeeease help me.
p.s ive only had it about 6 months

No way to help you. If the device is powered off immediately after being submerged in water and allowed to dry thoroughly on the inside, the chances are improved for being able to use it again, but is no guarantee. Not hearing water when shaken does not ensure no moisture remains on the inside, and it doesn't take much to cause damage.

AMIS Library System Reference Application - Error

Hi,
I'm a Forms/pl-sql guy and trying to learn Java technology.
I downloaded the ALS application and modified the build.properties file as described in the installation document as shown below:
database.ddl.dir=ddl
database.username=psreddy
database.password=welcome
database.url=jdbc:oracle:thin:@roadway.wvu.edu:3001:roadsdev
But when I Open the RMB menu on the buildAlsDB.xml and select the option Build Default Target. I'm getting the following error:
Error(80): Class Not Found: JDBC driver oracle.jdbc.driver.OracleDriver could not be loaded.
Can somebody pleeeeeeeeease help !
Thanks in advance
- Pradeep

Peter,
Even after setting the paths still getting the error, and regarding the slashes.. I didn't change them, they were like that in the provided demo code.
I did not modify the buildAlsDB.xml code except the jdev.installdir and the jheadstart.installdir as per your suggestion.
Following is the code of buildAlsDB.xml:
jdev.installdir=C:/JDev1012
jheadstart.installdir=C:/JHeadstart
compile.srcdir=src
compile.outdir=deploy/classes
web.dir=web
webinf.dir=${web.dir}/WEB-INF
webinf.classes.dir=${webinf.dir}/classes
webinf.lib.dir=${webinf.dir}/lib
web.images.dir=${web.dir}/images
database.ddl.dir=ddl
database.username=psreddy
database.password=welcome
database.url=jdbc:oracle:thin:@roadway.wvu.edu:3001:roadsdev
deployment.outdir=deploy
deployment.warfile=ALS.war
deployment.earfile=ALS.ear
deployment.webapp.file=deploy/application.xml
application.title=AMIS Library System
Thanks for your patience and hoping to get a solution..
- Pradeep

Battery Help .. DEF

okay, so I got my uber cool little creative rhomba today and i plugged it in to charge. But, it says it's already fully charged. So I unplug it, everytime it won't stay on. We've installed the software like 5 times this evening and I can't figure it out. I've gone through all the support and guides and I wrote customer service, but I'm leaving town Monday morning like at 6. I was really hoping I could get it working before then. So if anyone's smart enough to help me, pleeeeeeeeease. I shall be your friend forever. Thank you guys!

Try a search in the knowledge base on "reset rhomba" or "recovery rhomba".
The firmware is like the operating system of the player. Sometimes Creative release updated versions which you can download to the player and therefore update the players functions (and often fix bugs). I'm not sure if a new version is available for the Rhomba, but it's worth checking.

Problem with threads and simulation: please help

please help me figure this out..
i have something like this:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class DrawShapes extends JApplet{
     private JButton choices[];
     private String names[]={"line", "square", "oval"};
     private JPanel buttonPanel;
     private DrawPanel drawingArea;
     private int width=300, height=200;
     public void init(){
          drawingArea=new DrawPanel(width, height);
          choices=new JButton[names.length];
          buttonPanel=new JPanel();
          buttonPanel.setLayout(new GridLayout(1, choices.length));
          ButtonHandler handler=new ButtonHandler();
          for(int i=0; i<choices.length; i++){
               choices=new JButton(names[i]);
               buttonPanel.add(choices[i]);
               choices[i].addActionListener(handler);
          Container c=getContentPane();
          c.add(buttonPanel, BorderLayout.NORTH);
          c.add(drawingArea, BorderLayout.CENTER);
     }//end init
     public void setWidth(int w){
          width=(w>=0 ? w : 300);
     public void setHeight(int h){
          height=(h>=0 ? h : 200);
     /*public static void main(String args[]){
          int width, height;
          if(args.length!=2){
               height=200; width=300;
          else{
                    width=Integer.parseInt(args[0]);
                    height=Integer.parseInt(args[1]);
          JFrame appWindow=new JFrame("An applet running as an application");
          appWindow.addWindowListener(
               new WindowAdapter(){
                    public void windowClosing(WindowEvent e){
                         System.exit(0);
          DrawShapes appObj=new DrawShapes();
          appObj.setWidth(width);
          appObj.setHeight(height);
          appObj.init();
          appObj.start();
          appWindow.getContentPane().add(appObj);
          appWindow.setSize(width, height);
          appWindow.show();
     }//end main*/
     private class ButtonHandler implements ActionListener{
          public void actionPerformed(ActionEvent e){
               for(int i=0; i<choices.length; i++){
                    if(e.getSource()==choices[i]){
                         drawingArea.setCurrentChoice(i);
                         break;
}//end class DrawShapes
class DrawPanel extends JPanel{
     private int currentChoice=-1;
     private int width=100, height=100;
     public DrawPanel(int w, int h){
          width=(w>=0 ? w : 100);
          height=(h>=0 ? h : 100);
     public void paintComponent(Graphics g){
          super.paintComponent(g);
          switch(currentChoice){
               case 0:     g.drawLine(randomX(), randomY(), randomX(), randomY());
                         break;
               case 1: g.drawRect(randomX(), randomY(), randomX(), randomY());
                         break;
               case 2: g.drawOval(randomX(), randomY(), randomX(), randomY());
                         break;
     public void setCurrentChoice(int c){
          currentChoice=c;
          repaint();
     private int randomX(){
          return (int) (Math.random()*width);
     private int randomY(){
          return (int) (Math.random()*height);
}//end class drawPanel
That one's from a book. I used that code to start with my applet. Mine calls different merthod from the switch cases. Say I have:
case 0: drawStart(g); break;
public void drawStart(Graphics g){
/* something here */
drawMain(g);
public void drawMain(graphics g){
g.drawString("test", x, y);
//here's where i'm trying to pause
//i've tried placing Thread.sleep between these lines
g.drawLine(x, y, a, b);
//Thread.sleep here
g.drawRect(x, y, 50, 70);
}I also need to put delays between method calls but I need to synchronize them. Am I doing it all wrong? The application pauses or sleeps but afterwards, it still drew everything all at once. Thanks a lot!

It is. Sorry about that. Just answer any if you want to. I'd appreciate your help. Sorry again if it caused you anything or whatever. .n_n.

Query Help

Table1:
ou store point
LS LIB1 50
LS LIB1 200
LS LIB1 100
LS LIB1 79
I have to insert table1 to table2 by splitting into every 143point and assing serial number for every 143 from parameter.
in aboce example we can split 3 time 143 like below table2 sample.
Table2
ou store point serial_number
LS LIB1 50 101
LS LIB1 93 101
LS LIB1 107 102
LS LIB1 36 102
LS LIB1 64 103
LS LIB1 79 103
i tried below procedure its not working.
table may have any order like below.
Table1:
ou store point
LS LIB1 200
LS LIB1 50
LS LIB1 100
LS LIB1 79
then table2
ou store point serial_number
LS LIB1 143 101
LS LIB1 57 102
LS LIB1 50 102
LS LIB1 36 102
LS LIB1 64 103
LS LIB1 79 103
create or replace procedure assign_serial(from_num number,to_num number) is
bal number(10);
begin
bal := 0;
for c1 in(select * from table1)
loop
if c1.point <=143 then
if bal=0 then
bal=143-used;
insert int0 table2 values(c1.ou,c1.store,used);
elsif used > 0 then
used=used-bal;
insert int0 table2 values(c1.ou,c1.store,bal);
bal=0;
if used > 0 then
insert int0 table2 values(c1.ou,c1.store,used);
end if;
bal:=143-used;
end if;
end loop;
end;
How to split and assign serial number,please hELP.

.after giving serial num i have to change points in table1 to 0.The problem for SUm and split for every 143 is ,different OU and store is there.we have to know for which store points we earned serial number.
i hope this below logic little satisfy except assign cardnum,please........ check and currect the logic
LS LIB1 50
LS LIB1 200
LS LIB1 100
LS LIB1 79
--variable used and bal
for c1 in(select * from table1)
loop
used := c1.points;
if c1.point <=143 then
if bal=0 then
bal=143-used;
insert int0 table2 values(c1.ou,c1.store,used);
elsif used > 0 then
used=used-bal;
insert int0 table2 values(c1.ou,c1.store,bal);
bal=0;
if used > 0 then
insert int0 table2 values(c1.ou,c1.store,used);
end if;
bal:=143-used;
end if;
end loop;

Help my safari doesnt open and gives me a crash report

help my safari doesn't open and gives me a crash report ever since i downloaded a file from the internet. I have a macbook air (early 2014) with running os x yosemite version 10.10.1

There is no need to download anything to solve this problem.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates
if it's not already checked.

Apple Mini DVI to Video Adapter is not working. Please Help...

I bought an Apple Mini DVI to Video Adapter to connect my Macbook to a TV using normal video cable. When I connect the cable, my Laptop DIsplay gives a flickr once and then it shows nothing. I checked Display in the system preference where I don't get a secondary monitor option. My TV is panasonic and it's an old one. I work on Final Cut Pro and it's very very important to see my videos on a TV. What am I doing wrong with the connection? Anyone Please Please help...

Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
Dicko

Mini dvi to video adapter help pleaseeeeeeeeeeeeeeeeeeeeeeeeee

right,
ive got a 20" intel imac. i bought a mini dvi to video adapter.it said it works with the intel macs.
i maybe being a bit thick here but the end of the dvi seems to be a different size to the port on the mac.
please help....................

You might find relief in the iMac Forum. Perhaps they will appreciate your distinctive thread header style more fully.
good luck.
x

PSE icons instead of the photo. I need to view photos at a glance. Please help me????

Please help, this is driving me crazy. I have downloaded my free PSE #9, it came with my Leica Camera. I cannot view at a glance any of my photos. There is only an icon that reads, PSE. To view any of my photos, I must click select and then preview. This gets old, and I am doing 4 times the work. I am having to use the dates to guess where my photos might be. I hate this! My old Photo Shop #5 didn't do this. When you went to my pictures, you could see every photo.
I have tried the right click and open as any program. What ever program I choose, that is the icon that appears. No photo. Still no good.
Please help.
Thanking anyone in advance,
Leica

Hi,
Are you using Windows Explorer to view the files?
If so, load Explorer, go to the Tools menu and select Folder Options.
Click on the View tab and make sure the first option (Always show icons, never thumbnails) is not checked.
Click on OK and see if that is any better.
Brian

IPOD NO LONGER RECOGNIZED BY ITUNES - HELP!!!!!!!!!!!!!!!!!

When connecting to I-Tunes my Ipod now appears only as 'IPOD'
The Windows 'Autoplay' box appears on the left hand side of my screen.
Everything then freezes for a short while then an error message says that I-Tunes has detected an Ipod that is corrupted.
My Ipod itself is fine so I'm reluctant to restore if that will not solve the problem.
Is something to do with an automatic software update?
Please help......................
Advent Windows XP

iOS: Device not recognized in iTunes for Mac OS X
Do not omit the additional information pararaph.

HT203164 help! i am using itunes 10.6.1.7 and windows vista 64. itunes will no longer burn cds. i have searched online and tried all i saw that could possibly fix it and it is still not working.

i have tried:
reloading itunes
unchecking 'write'
removing lower filters in regedit
ensuring i had the correct 'gear' info in the upper filters in regedit
removing 'gear' from regedit, system32
reloading updated version of 'gear'
cleaning my registery
deleting itunes
cleaning registry again
reloading itunes
cleaning registry again
i still cannot burn cd. t i can import and play cds in itunes and i can watch dvds. itunes will just not burn to blank cds, and i have tried sever new blank cds, each is not recognized.
i do not know what else to do, i have searched the internet and whatever i saw doable i tried.
when i check the cd drive in itunes i had gotten a 4220 error, cnet advised to download a free error fixer, however, this error fixer gave me and enduser message, so that didn't work.
the diagnostic for the cd burner read that i had to put in a formatted disc with content so i did and there are the results of that were that it read the cd and that the 4220 errir code was encountered last time there was an attempt to burn.
and 'could not open cd handler 32. there is a problem with the installation of the drive in windows or the drive contains a copyprotected cd.
the above is not the case as it also popped up for me to import cd to itunes.
i tried to copy and past the entire contents here but it would not allow me to paste.
please help!

I too have only recently encountered this problem. I have been able to burn disks before but it keeps making all these weird sounds. It might be a hardware problem but the fact that everything else that uses a disk works I doubt it.

HELP! Can not install Oracle 8.1.5 w/ RedHat 6.1!

I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1. The
Oracle installation script generates several errors. I have
tried several attempts, using different options, but they all
generate errors.
Please help. The Oracle Installation scripts appear to be very
buggy... or perhaps they are incompatible with the standard
RedHat 6.1 release. Either way, it is very frustrating.
I have documented one of my (failed) installation attempts below.
Does anyone have any words of wisdom?
I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB RAM,
a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
2.2.12-2 kernel). RedHat was installed using the standard "Gnome
Workstation" configuration.
The Oralce CD is labeled:
"Oralce 8i Enterprise Edition
Release 8.1.5
for Linux
(c) Oracle Corporation 1999"
I got this CD about one week ago at Oracle OpenWorld '99 in Los
Angeles... it should be their "latest & greatest" version so far.
1. Pre-Installation and ./runInstall
I created an "oracle" Unix account w/ groups "oinstall" (the
primary group) and "dba" (a secondary group).
I created directories /u01 through /u04, belonging to oracle.
I setup .cshrc and sourced it, containing:
umask 022
setenv DISPLAY `hostname`:0
xhost +
setenv ORACLE_BASE /u01/app/oracle
setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
setenv ORACLE_SID cprtest
setenv PATH ${ORACLE_HOME}/bin:${PATH}
setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
setenv NLS_LANG US7ASCII
I downloaded jre116_v5 and installed to /usr/local/jre.
Finally, I executed (from the "oracle" Unix account):
cd /mnt/cdrom
./runInstall
Problem: I got the error (from ./runInstall):
Initializing Java Virtual Machine from /usr/local/jre/bin/jre.
Please wait...
Error in CreateOUIProcess(): -1
: Bad address
Workaround: Executed the following commands instead:
cd /mnt/cdrom/install/linux
./runIns.sh
3. runIns.sh and root.sh
I selected the following options (from ./runIns.sh):
Source: /mnt/cdrom/stage/products.jar
Destination: /u01/app/oracle/product/8.1.5
Oracle 8i Enterprise Edition 8.1.5.0.0
Typical (585MB)
Installable Components: Oralce Intelligent Agent 8.1.5.0.0
Global Database Name: cprtest.parkrussell.com
SID: cprtest
Directory for Database Files: /u02
Then (when instructed by ./runIns.sh), I attempted to execute
(from the
"root" Unix account):
cd /u01/app/oracle/product/8.1.5
./root.sh
Problem: I got the error:
"bash: ./root.sh: Permission denied"
The execute bit was not set.
Workaround: I executed:
chmod a+x root.sh
./root.sh
5. Configuration Tools
The Oracle Installer (./runIns.sh) attempted to execute:
A. Net8 Configuration Agent
B. Oracle Database Configuration Agent
Problem: The "Oracle Database Configuration Agent" failed with
the following error message:
"One or more tools have failed. It is recommended but not
required that these tools succeed for this installation.
You can now select these tools, read its details to examine
why they have failed, fix those problems, and retry them.
Or, you can click "Next" to continue."
When I selected the "Oracle Database Configuration Agent" for
more info, I got the following additional details (as the cause
of the error):
"A required command line argument is missing."
The log file
"/u01/app/oracle/oraInventory/logs/installActions.log" recorded:
"Command which is being spawned is /usr/local/jre/bin/jre
-Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
-classpath
/usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-3_1_10.jar:/u01/app/oracle/produc
/8.1.5/jlib/share-1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAssist.jar:/u01/a
p/oracle/product/8.1.5/assistants/jlib/jnls.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/ACC.
AR:/u01/app/oracle/product/8.1.5/jlib/help-3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice
4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u01/app/oracle/product/8.1.5/jlib/n
tcfg.jar:/usr/local/jre/lib/i18n.jar
DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos NO_VALUE
/seedloc NO_VALUE /sid cprtest /orahome
/u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
/u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
/gdbName cprtest.parkrussell.com
Invalid Exit Code. The following result code will be used for
configuration tool: 1
Configuration tool Oracle Database Configuration Assistant
failed"
Workaround: There is obviously nothing I can do to fix this
problem. It appears to be an internal bug in ./runIns.sh.
Therefore, I selected "Next" and executed "dbassist" directly.
6. dbassist
I executed:
dbassist
Problem: I got the following error:
"JNLS Execution:oracle.ntpg.jnls.JNLSException
Unable to find any National Character Sets. Please
check your Oracle installation."
Workaround: Press "OK" and ignore the error.
7. dbassist (cont.)
I selected the following options:
Create database
Typical
Copy existing database files from the CD
Global Database Name: cprtest.parkrussell.com
SID: cprtest
Problem: I got the following error:
"CD-ROM drive not detected on this system.
Database not created."
(Note: I've been running the installation scripts from the
CDROM drive this entire time. "df" shows the CDROM drive
mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
Workaround: Abort (which generated the additional error: "Unable
to create database. DBCA-00003: No CD-ROM drive detected.") and
run dbassist again, this time using different parameters.
8. dbassist, again
I executed "dbassist" again and selected the following options:
Create database
Typical
Create new database files
Hybrid
Concurrently connected users: 5
Options: Oralce interMedia, Oralce JServer, and iM demos
Global Database Name: cprtest2.parkrussell.com
SID: cprtest2
Create database now
Problem: I got the following error:
"ORA-01012: not logged on"
Workaround: Try, try again.
9. dbassist, one last time
Executed "dbassist" once more and selected the following options:
Create database
Typical
Create new database files
Hybrid
Concurrently connected users: 5
Options: Oralce interMedia, Oralce JServer, and interMedia
demos
Global Database Name: cprtest3.parkrussell.com
SID: cprtest3
Output creation script
Then, I executed (from the "oracle" Unix account):
cd /u01/app/oracle/product/8.1.5/install
setenv ORACLE_SID cprtest3
./sqlcprtest3.sh
Problem: I got the following output:
"Oracle Server Manager Release 3.1.5.0.0 - Production
(c) Copyright 1997, Oracle Corporation. All Rights Reserved.
Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
With the Partitioning and Java options
PL/SQL Release 8.1.5.0.0 - Production
SVRMGR> SVRMGR> Connected.
SVRMGR> ORACLE instance started.
ORA-01012: not logged on
SVRMGR> 2> 3> 4> 5> 6> 7>
8> 9> CREATE DATABASE "cprtest3"
ORA-01012: not logged on
SVRMGR> Disconnected."
Workaround: Beats me.
10. sqlplus
I attempted to execute sqlplus, but got the following error
message:
"/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission denied."
The execute bit was not set.
Workaround: I executed:
chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
sqlplus
I gave up for now... there were just too many things wrong with
this installation, starting with the very first command I was
supposed to execute (./runInstaller).
I can't fathom why Oracle's installation script has so many bugs.
Am I just doing something terribly wrong?
Please help.
null

I'm using enlightenment version 0.15.5-41, which is more recent
than the 0.15.5-37 version (containing the Oracle installer
patch) that you recommended. Unfortunately, it fails when using
this version.
I also tried installing Oracle using twm, with enlightenment
disabled. This didn't help either.
Furthermore, the errors that I'm encountering in the OUI are
not just toward the end of the installation. They happen from
the very beginning, right after I enter "./runInstall", and
continue every step of the way.
Calvin Mitchell (guest) wrote:
: Check out my thread: "Assistants Failure Toward end of Oracle
: Install" to see where i've gone with this.
: if your running Enlightenment as your window manager you need
to
: upgrade to 0.15.5-37, that will solve the OUI error.
: Let me know if you solve any of your problems.
: Chris Russell (guest) wrote:
: : I can not get Oracle 8.1.5 to install onto Linux RedHat 6.1.
: The
: : Oracle installation script generates several errors. I have
: : tried several attempts, using different options, but they all
: : generate errors.
: : Please help. The Oracle Installation scripts appear to be
very
: : buggy... or perhaps they are incompatible with the standard
: : RedHat 6.1 release. Either way, it is very frustrating.
: : I have documented one of my (failed) installation attempts
: below.
: : Does anyone have any words of wisdom?
: : I am installing Oracle onto a Dell Latitude CPi PC w/ 128MB
: RAM,
: : a 366MHz Pentium II, and RedHat 6.1 (using the standard Linux
: : 2.2.12-2 kernel). RedHat was installed using the standard
: "Gnome
: : Workstation" configuration.
: : The Oralce CD is labeled:
: : "Oralce 8i Enterprise Edition
: : Release 8.1.5
: : for Linux
: : (c) Oracle Corporation 1999"
: : I got this CD about one week ago at Oracle OpenWorld '99 in
Los
: : Angeles... it should be their "latest & greatest" version so
: far.
: : 1. Pre-Installation and ./runInstall
: : I created an "oracle" Unix account w/ groups "oinstall" (the
: : primary group) and "dba" (a secondary group).
: : I created directories /u01 through /u04, belonging to oracle.
: : I setup .cshrc and sourced it, containing:
: : umask 022
: : setenv DISPLAY `hostname`:0
: : xhost +
: : setenv ORACLE_BASE /u01/app/oracle
: : setenv ORACLE_HOME ${ORACLE_BASE}/product/8.1.5
: : setenv ORACLE_SID cprtest
: : setenv PATH ${ORACLE_HOME}/bin:${PATH}
: : setenv LD_LIBRARY_PATH ${ORACLE_HOME}/lib
: : setenv NLS_LANG US7ASCII
: : I downloaded jre116_v5 and installed to /usr/local/jre.
: : Finally, I executed (from the "oracle" Unix account):
: : cd /mnt/cdrom
: : ./runInstall
: : Problem: I got the error (from ./runInstall):
: : Initializing Java Virtual Machine from
: /usr/local/jre/bin/jre.
: : Please wait...
: : Error in CreateOUIProcess(): -1
: : : Bad address
: : Workaround: Executed the following commands instead:
: : cd /mnt/cdrom/install/linux
: : ./runIns.sh
: : 3. runIns.sh and root.sh
: : I selected the following options (from ./runIns.sh):
: : Source: /mnt/cdrom/stage/products.jar
: : Destination: /u01/app/oracle/product/8.1.5
: : Oracle 8i Enterprise Edition 8.1.5.0.0
: : Typical (585MB)
: : Installable Components: Oralce Intelligent Agent 8.1.5.0.0
: : Global Database Name: cprtest.parkrussell.com
: : SID: cprtest
: : Directory for Database Files: /u02
: : Then (when instructed by ./runIns.sh), I attempted to execute
: : (from the
: : "root" Unix account):
: : cd /u01/app/oracle/product/8.1.5
: : ./root.sh
: : Problem: I got the error:
: : "bash: ./root.sh: Permission denied"
: : The execute bit was not set.
: : Workaround: I executed:
: : chmod a+x root.sh
: : ./root.sh
: : 5. Configuration Tools
: : The Oracle Installer (./runIns.sh) attempted to execute:
: : A. Net8 Configuration Agent
: : B. Oracle Database Configuration Agent
: : Problem: The "Oracle Database Configuration Agent" failed
with
: : the following error message:
: : "One or more tools have failed. It is recommended but not
: : required that these tools succeed for this installation.
: : You can now select these tools, read its details to
examine
: : why they have failed, fix those problems, and retry them.
: : Or, you can click "Next" to continue."
: : When I selected the "Oracle Database Configuration Agent" for
: : more info, I got the following additional details (as the
cause
: : of the error):
: : "A required command line argument is missing."
: : The log file
: : "/u01/app/oracle/oraInventory/logs/installActions.log"
: recorded:
: : "Command which is being spawned is /usr/local/jre/bin/jre
: : -Duser.dir=/u01/app/oracle/product/8.1.5/assistants/dbca/jlib
: : -classpath
/usr/local/jre/lib/rt.jar:/u01/app/oracle/product/8.1.5/jlib/ewt-
: 3_1_10.jar:/u01/app/oracle/product/8.1.5/jlib/share-
1_0_6.jar:/u01/app/oracle/product/8.1.5/assistants/dbca/jlib/DBAs
sist.jar:/u01/app/oracle/product/8.1.5/assistants/jlib/jnls.jar:/
u01/app/oracle/product/8.1.5/assistants/jlib/ACC.JAR:/u01/app/ora
: cle/product/8.1.5/jlib/help-
: 3_0_7.jar:/u01/app/oracle/product/8.1.5/jlib/oracle_ice-
4_03_3.jar:/u01/app/oracle/product/8.1.5/jlib/HotJavaBean.jar:/u0
1/app/oracle/product/8.1.5/jlib/netcfg.jar:/usr/local/jre/lib/i18
: n.jar
: : DBCreateWizard /createtype seed /numusers NO_VALUE /apptype
: : NO_VALUE /cartridges NO_VALUE /options NO_VALUE /demos
NO_VALUE
: : /seedloc NO_VALUE /sid cprtest /orahome
: : /u01/app/oracle/product/8.1.5 /orabase /u01/app/oracle /dbloc
: : /u02 /clususer NO_VALUE /cluspswd NO_VALUE /nodeinfo NO_VALUE
: : /gdbName cprtest.parkrussell.com
: : Invalid Exit Code. The following result code will be used
for
: : configuration tool: 1
: : Configuration tool Oracle Database Configuration Assistant
: : failed"
: : Workaround: There is obviously nothing I can do to fix this
: : problem. It appears to be an internal bug in ./runIns.sh.
: : Therefore, I selected "Next" and executed "dbassist"
directly.
: : 6. dbassist
: : I executed:
: : dbassist
: : Problem: I got the following error:
: : "JNLS Execution:oracle.ntpg.jnls.JNLSException
: : Unable to find any National Character Sets. Please
: : check your Oracle installation."
: : Workaround: Press "OK" and ignore the error.
: : 7. dbassist (cont.)
: : I selected the following options:
: : Create database
: : Typical
: : Copy existing database files from the CD
: : Global Database Name: cprtest.parkrussell.com
: : SID: cprtest
: : Problem: I got the following error:
: : "CD-ROM drive not detected on this system.
: : Database not created."
: : (Note: I've been running the installation scripts from the
: : CDROM drive this entire time. "df" shows the CDROM drive
: : mounted on /mnt/cdrom. "ls /mnt/cdrom" works too.)
: : Workaround: Abort (which generated the additional error:
: "Unable
: : to create database. DBCA-00003: No CD-ROM drive detected.")
: and
: : run dbassist again, this time using different parameters.
: : 8. dbassist, again
: : I executed "dbassist" again and selected the following
options:
: : Create database
: : Typical
: : Create new database files
: : Hybrid
: : Concurrently connected users: 5
: : Options: Oralce interMedia, Oralce JServer, and iM demos
: : Global Database Name: cprtest2.parkrussell.com
: : SID: cprtest2
: : Create database now
: : Problem: I got the following error:
: : "ORA-01012: not logged on"
: : Workaround: Try, try again.
: : 9. dbassist, one last time
: : Executed "dbassist" once more and selected the following
: options:
: : Create database
: : Typical
: : Create new database files
: : Hybrid
: : Concurrently connected users: 5
: : Options: Oralce interMedia, Oralce JServer, and interMedia
: : demos
: : Global Database Name: cprtest3.parkrussell.com
: : SID: cprtest3
: : Output creation script
: : Then, I executed (from the "oracle" Unix account):
: : cd /u01/app/oracle/product/8.1.5/install
: : setenv ORACLE_SID cprtest3
: : ./sqlcprtest3.sh
: : Problem: I got the following output:
: : "Oracle Server Manager Release 3.1.5.0.0 - Production
: : (c) Copyright 1997, Oracle Corporation. All Rights
Reserved.
: : Oracle8i Enterprise Edition Release 8.1.5.0.0 - Production
: : With the Partitioning and Java options
: : PL/SQL Release 8.1.5.0.0 - Production
: : SVRMGR> SVRMGR> Connected.
: : SVRMGR> ORACLE instance started.
: : ORA-01012: not logged on
: : SVRMGR> 2> 3> 4> 5> 6> 7>
: : 8> 9> CREATE DATABASE "cprtest3"
: : ORA-01012: not logged on
: : SVRMGR> Disconnected."
: : Workaround: Beats me.
: : 10. sqlplus
: : I attempted to execute sqlplus, but got the following error
: : message:
: : "/u01/app/oracle/product/8.1.5/bin/sqlplus: Permission
: denied."
: : The execute bit was not set.
: : Workaround: I executed:
: : chmod a+x /u01/app/oracle/product/8.1.5/bin/sqlplus
: : sqlplus
: : I gave up for now... there were just too many things wrong
with
: : this installation, starting with the very first command I was
: : supposed to execute (./runInstaller).
: : I can't fathom why Oracle's installation script has so many
: bugs.
: : Am I just doing something terribly wrong?
: : Please help.
null

Dear experts help needed in creation of report in hr

Please check the below code.
There is one Transaction code PA20 from these i need the fields in my report.
I tried writing the report but the fields are from structure so please help in creating the report.
I am a beginner so i donno how to find the below fields are coming from which table.
when i do F1 on the fields in PA20 i found the fields but they are from structure.
type-POOLS: SLIS.
TYPES : BEGIN OF TY_P0001,
        PERNR TYPE PERNR_D,      "Personnel Number
        BEGDA TYPE BEGDA,        "Start Date
        BUKRS TYPE BUKRS,        "Company Code
        ENAME TYPE EMNAM,        "Formatted Name of Employee or Applicant
        END OF TY_P0001.
TYPES : BEGIN OF TY_P0016,
        PERNR TYPE PERNR_D,      "Personnel Number
        PRBZT TYPE PRBZT,        "Probationary Period
        CTTYP TYPE CTTYP,        "Contract Type
        END OF TY_P0016.
TYPES: BEGIN OF TY_P9210,
         PERNR TYPE PERNR_D,
        ZTICKET_AMT TYPE ZTICKET_AMT, "Ticket Amount
        END OF TY_P9210.
TYPES : BEGIN OF TY_OUTPUT,
         PERNR TYPE PERNR_D,      "Personnel Number
         BEGDA TYPE BEGDA,        "Start Date
         BUKRS TYPE BUKRS,        "Company Code
         ENAME TYPE EMNAM,        "Formatted Name of Employee or Applicant
         PRBZT TYPE PRBZT,        "Probationary Period
         CTTYP TYPE CTTYP,        "Contract Type
         ZTICKET_AMT TYPE ZTICKET_AMT, "Ticket Amount
        END OF TY_OUTPUT.
DATA: T_P0001 TYPE TY_P0001 OCCURS 1,
       W_P0001 TYPE TY_P0001,
       T_P0016 TYPE TY_P0016 OCCURS 1,
       W_P0016 TYPE TY_P0016,
       T_P9210 TYPE TY_P9210 OCCURS 1,
       W_P9210 TYPE TY_P9210,
       T_OUTPUT TYPE TY_OUTPUT OCCURS 1,
       W_OUTPUT TYPE TY_OUTPUT.
    START-OF-SELECTION.
        SELECT PERNR
               BEGDA
               BUKRS
               ENAME FROM P0001 INTO TABLE T_P0001
               WHERE
                AND BUKRS IN S_BUKRS
                AND BEGDA < '31032007'.
          SELECT PERNR
                 PRBZT
                 CTTYP
                 FROM P0016 INTO TABLE T_P0016
                 FOR ALL ENTRIES IN T_P0001
                 WHERE PERNR = T_P0001-PERNR
          SELECT PERNR
                 ZTICKET_AMT
                 FROM P920 INTO TABLE T_P920
                 FOR ALL ENTRIES IN T_P920
                 WHERE PERNR = T_P0001-PERNR.

use logical data base PNP.
tables: pernr.
infotypes: 0001, 0016, ....
start-of-selection.
get pernr.
here all tables Pxxxx defined as INFOTYPES are filled for the selected PERNR.

PLEEEEEEEEEASE HELP!!

Similar Messages

Maybe you are looking for