Plez help me! Can't upgrade 3g to OS 4 with iTunes 10

Very frustrated and I have tried everything!! I have read and read on the forums until my eyes are bleeding. LOL

http://support.apple.com/kb/TS3694#error1013
This error usually means that your computer was used to jailbreak or otherwise hack some iDevice (not necessarily the phone with the problem) in the past. You will have to edit the Hosts file and remove any lines that contain gs.apple.com. As you didn't say what your operating system is I can't tell you where to find the Hosts file.
It's also possible, but less likely, that your firewall or antivirus is blocking access to Apples activation servers.

Similar Messages

I just bought ilife11 from a friend and tried to install it but it says I need to have 10.6 or later.  I have 10.5.4.  Can I upgrade to the latest version with a "download" ?

i just bought ilife11 from a friend and tried to install it but it says I need to have 10.6 or later. I have 10.5.8. Can I upgrade to the latest version with a "download" ?

entatty5 wrote:
... snow leopard, which I don't have. Do I have to go program upgrade by upgrade? I can't just go from 10.5.8 to the latest? Thanks for the help.
You need Snow Leopard before you can go to Lion...
Check that your Mac meets the System Requirements...
Snow Leopard Specs:
http://support.apple.com/kb/SP575
Lion Specs:
http://www.apple.com/macosx/specs.html

Help!Can't access iCloud (pics apps) even with correct password. Won't download my stored info on my new phone

Help!Can't access iCloud (pics apps) even with correct password. Won't download my stored info on my new phone

That happens because photo stream photos only remain in iCloud for 30 days, even though your last 1000 photo stream photos remain on your devices until deleted. When you enabled photo stream on your iPod 4, you only received photo stream photos from the last 30 days as older photos are no longer in iCloud. If you want to stream these older photos to your new iPod, you will have to create a shared photo stream on your old one that contains these photos (requires iOS 6 or higher) and invite yourself as a subscriber, as explained here: http://help.apple.com/icloud/#/mmc0cd7e99.

Never once has my phone updated without deleting everything. It says "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes. I can't call for help because my phone is frozen on the screen with iTune

Never once has my phone updated without deleting everything. It says "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes. I can't call for help because my phone is frozen on the screen with iTunes. On line live chat won't chat until I give them my serial number which I can't get to because its frozen and can't call for the same reason!! Omg! Someone please help me!?

Morning AppleHlumamkhululi,
Thanks for using Apple Support Communities.
In most cases, the connected iPod needs to be restored.
For more information on this, take a look at this article:
iTunes has detected an iPod in recovery mode - Use iTunes to restore
http://support.apple.com/kb/ts1456
Best of luck,
Mario

My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive. How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?

My itunes can not upgrade. it is looking for athe Itunes.MSI file, but it is unable to find it on the C:drive. How do I correct the error, and reinstall Itune for my Iphone, Ipad and Ipod?

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

HT1947 I can't pair Remote on my iPhone with iTunes on my MacBook Pro... Help, pls. Thanks!

I tried everything. But it looks like I haven't really done anything coz nothing worked. I don't know where to start. My iPhone 5 has an updated iOS, my iTunes is also up to date... I can't find the "Look for iPod touch, iPhone and iPad Remotes" in iTunes. At this point, I'm really lost. Help, pls!

What does this have to do with iTunes for Windows, the forum to which the question was posted?

Can't play CD's I burned with iTunes

Hi guys wonder if anyone can help me - I burned a couple of CD's with iTunes to play in my car, one of them won't work at all - it just comes up error. The other one works every now and then.
I don't think it's the changer system as I can usually play CD-R's and I don't think it's the disc slot as if I swap them round they still won't play.
Is it a mistake I have made in burning them?
Any help welcome - thanks in advance xx

Could be a settings issue. Some cars do not recognize mp3 CDs, you may have made a disc full og mp3 files. Might have put AAC files onto disc, this also might not work in car.

How can I get my ipod to work with itunes?

When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

Can't Sync ATV1 3.0.2 with iTunes 10.2.2 (Snow Leopard)

Can't Sync ATV1 3.0.2 with iTunes 10.2.2
I want to move all the content on our AppleTV back to the main system library attached to our iMac and after turning off streaming, I can't find any way to sync the Mac with the ATV.
The only way that I can find to make the ATV show up in iTunes' device list is to start them go to Settings > Computers > Add A Shared iTunes Library from the ATV menus, but that just put puts us back into streaming mode.
I can't find a way to get the ATV to show up in the iTunes device list and then set up syncing.
HELP!!!!!!!

Hey there bherrick,
I have an article for you that describes your issue and will help you troubleshoot this a little further:
iTunes: May become unresponsive when connecting iPhone, iPad, or iPod touch
http://support.apple.com/kb/ts3219
Thanks for coming to the Apple Support Communities!
Regards,
Braden

I have an iPod touch that is synced with my library. I just got a new Nano and I want to sync that with the same library but I can't figure out to do it with iTunes 11

I have an iPod touch that is synced with my library. I just got a new Nano and I want to sync that with the same library but I can't figure out to do it with iTunes 11

I watched the new itunes tutorial, and if you double click on the blank part of the bar that says music, videos, apps, etc, a button will show with your ipod's name.

How you can sync your contact and your mail with iTunes 11 as it's not there anymore ?

How you can sync your contact and your mail with iTunes 11 as it's not there anymore ?

~ means your Home directory. Using the command above takes you to the Home directory on the boot drive. Your backup files are now on another drive in a directory that used to be your Home but is now a subfolder of Users so you have to specify that drive after the /Volumes, then the user name, then the rest to go there
I use OSX 10.4.11 and on it the libraries are still visible. There's two at least. One general one at the top level of the boot drive and another for each user (the one with the ~). I think they made at least one of them invisible with newer OS versions.

My original iPad2 was stolen, can I prevent thieve to use it with iTunes?

My original iPad2 was stolen, can I prevent thieve to use it with iTunes?
Unit was blocked by code and Find My Phone enebled but appears offline..

There is something wrong really. I could not locate my second iPhone2 (replacement for the stolen one) with cover closed (and pin locked). Impossible to locate it at all. I had to turn the location services off and on again and since this it started to work. But even so, it does not update the location - it just show the last located place (like one hour ago) until is pin unlocked. This is useless. By BB bold 9900 is possible to find on map even when is in holster and pinlocked. All it need is GSM signal. It show circle where it may be and when is on GPS signal, it update the ring diametre automatically - all without need to unlock the phone with pin code.
Please try to check it, if it does not work when the iPad is pinlocked, then it does not have sense.

Help! Can't Upgrade iTunes!

Hello everyone!
I just bought my first iPod (a Nano) tonight and when I plug it into my computer, it's telling me I need to download a newer version of iTunes. So I did.
Trouble is, I think I accidentally blocked the download popup. And now it takes me straight to the Thank You page.
I've tried clearing my cookies and enabling popups, but every time I try to download iTunes, it takes me to the Thank You page. Does anyone know how I can download the newest version? This is driving me a bit nuts.
I'm on a PC with Windows XP. I've already rebooted my computer (after clearing my cookies and enabling popups) and it STILL takes me to the Thank You page.
I don't know what to do. Apparently, the new iPods just came out two weeks ago, so I can't use it unless I have the newest version of iTunes. And I can't seem to download it. Grrrr!
Thanks!
Michelle
Message was edited by: MNightengale

(NB: PowerPC applications can still be run in Snow Leopard using Rosetta, but they will not work in later versions of OS X.)
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether any further updates are required, particularly to iTunes.
You should now see the App Store icon in iTunes, and you now need to set up your account:
http://support.apple.com/kb/HT4479
You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac Mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
http://store.apple.com/us/product/D6106Z/A/os-x-lion
or Mountain Lion:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

Please help! I can't get my iPod to sync with iTunes on my PC?

This problem is really frustrating and I would really appreciate some guidance because I'm completely stuck. I have been trying for many hours over the past few days to get my iPod touch to sync with iTunes on my PC. When I plug my iPod touch into my PC, iTunes opens up and this message pops up:
"This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install iTunes again."
I have completely removed iTunes from my PC several times and reinstalled it several times but this message continues to pop up and its really annoying because I can't put my music onto my iPod. I have followed instructions on the apple website which were to temove iTunes and related components from the Control Panel and then restart the PC and reinstall iTunes again. I've tried this several times and it simply didn't work and the error message continues to pop up when I plug my iPod into my PC. I really need to know what is the software required so that I can use my iPod with iTunes on my PC. I can't explain how much I'd appreciate help with this. Thanks in advance.
Do I need to install software on my iPod or on my PC? :S

Two ideas, but what version of Windows? what versions of iTunes? did you manually remove what the uninstaller left behind as outlined in Apple support article?
Did you upgrade to iOS 5 or not? what version? what about your iPod Touch model?
Backup its backup. Backup content.
USB is directly connected to a motherboard port?
Have you had to restore the iPod?
Also, many have pointed finger at Apple Mobile Service needing to be restarted first, then launch iTunes and then connect iPod.
Create a new Windows partition and use that to do a clean install and for testing. Always works.
Some security software. Microsoft Security Essentials does an excellent job, free, works.
I have not read or seen "the req'd software is not installed" mentioned by others, but could easily miss (new to iPod + iTunes myself and there were so many threads when iOS 5 came out).
http://support.apple.com/kb/HT1925
http://support.apple.com/kb/TS1567

Help i can't import my CDs on the new itunes

I know that lots of people are having this problem because i have read alot of the posts, but if somebody would be kind enough to help i would really appreciate it. I can't import any of my CDs in itunes. The CD does not appear in the source list. Something flashes up when i put the cd in which i think is the gracenote thing.
Here are the diagnostics:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Acer, inc. Aspire 1690
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: UBHelperPfc (2.5.0.204),
UpperFilters: NTIDrvr (1.0.0.6), GEARAspiWDM (2.0.4.3),
Video Driver: Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family\Intel(R) 915GM/GMS,910GML Express Chipset
IDE\DiskWDCWD600UE-22HCT0_____________________09.07D09, Bus Type ATA, Bus Address [0,0]
IDE\CdRomSlimtypeDVDRW_SLW-831S_________________WRS1___, Bus Type ATA, Bus Address [1,0]
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
E: Slimtype DVDRW SLW-831S, Rev WRS1
Audio CD in drive.
Found 13 songs on CD, playing time 50:37 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:32:52
Track 3, start time 07:40:40
Track 4, start time 10:48:32
Track 5, start time 15:54:65
Track 6, start time 19:21:02
Track 7, start time 23:13:60
Track 8, start time 26:07:60
Track 9, start time 30:22:40
Track 10, start time 34:54:30
Track 11, start time 38:30:55
Track 12, start time 41:30:22
Track 13, start time 47:44:25
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 24.
The drive CDRW speeds are: 24.
The drive DVDR speeds are: 24.
The drive DVDRW speeds are: 24.

Are you using one of the methods from the following document? (If so, which one?)
iTunes: How to move your music to a new computer

Plez help me! Can't upgrade 3g to OS 4 with iTunes 10

Similar Messages

Maybe you are looking for