PLM product availability matrix

Hello experts -
I am new to SAP PLM and I am doing some research for my company.  We are running SAP R/3 4.7, and I have two questions that I was hoping you could answer:
What is the latest version of PLM?
What is the PLM version that is compatible with R/3 4.7?
Thanks in advance

Hi Brad,
as (most of) SAP PLM is an integral part of your ERP system, your PLM version is R/3 Enterprise (4.7). That means that most parts of SAP PLM (like document management, change management, etc) are already installed on your ERP system. Latest SAP PLM release is ERP 6.0.
There are some additional parts of SAP PLM which are (usually) not part of your ERP system. That is for instance:
- cFolders (for collaboration, latest release: 4.0)
- cProjects (for collaboarive project management, latest release: 4.0)
If you need additional information on SAP PLM you can go to the service marketplace for PLM at service.sap.com/plm or the help portal at help.sap.com
Best regards,
Daniel

Similar Messages

  • I do not see Mobile 7.0 under Product Availability Matrix

    Hi Folks,
    Under PAM in Service market place i could not find any information regarding Mobile 7.0. I tried looking for installation guide but could not find the same for Mobile 7.0. Either I am looking at an incorrect page or is something really missing from PAM. Please help.

    Hi Manish
        Good to see you in MI forum.  Well there is no installation guide available for MI 7.0 but it is available only for MI 2.5.  For MI 7.0, you can use MI 2.5 New Technology Installation Guide as a reference or even refer to the following Re: MI clinet
    Hope this helps
    Best Regards
    Sivakumar

  • AFS Product Availability Matrix (PAM)

    Hi all:
    We are planning an upgrade to AFS 6.4 and we haven't been able to find a PAM for this version. Is there a PAM for it? or should we work with the SAP ECC 6.0 PAM?
    Regards
    Jose Arango

    Hi Jose,
    you can find the PAM Information by searching for "apparel" in http://service.sap.com/pam.
    There you find the information for
    Software Product Version     (Official Name)
    - SAP ECC AFS 5.0      (SAP Apparel and Footwear 5.0)
    - SAP APPAREL AND FOOTWEAR 6.0      (SAP Apparel and Footwear 6.0)
    - SAP APPAREL AND FOOTWEAR 6.3      (SAP Apparel and Footwear 6.3)
    - SAP APPAREL AND FOOTWEAR 6.4      (SAP Apparel and Footwear 6.4)
    - SAP APPAREL AND FOOTWEAR 6.5      (SAP Apparel and Footwear 6.5)
    Regards Frank

  • Platform/Version Availability Matrix Here

    For everyone who has been asking about what works with what platform, and what are the requirements...
    Please review the Product Availability Matrices available on Service Marketplace (YOU MUST USE YOUR Service Marketplace login).
    If you are wanting to use Visual Composer v6, then please review the SAP NetWeaver 04 matrix.
    If you are wanting to use Visual Composer v7, Visual Composer V7 has not been placed in general release. It is in restricted shipment. However, you can review the matrix for SAP NetWeaver 2004s (the platform needed for V7).
    For system requirements for each version, please refer to the installation guide. The installation guide are available on <a href="https://service.sap.com/instguides/">Service Marketplace</a> (YOU MUST USE YOUR Service Marketplace login). Navigate to:
    SAP NetWeaver
        Release 04 (2004s & VC7 has not yet been released)
            Installation
                SAP VC
    If you do not see these paths, it is because your user id is not authorized to access the content.

    "If you are wanting to use Visual Composer v7, Visual Composer V7 has not been placed in general release. It is in restricted shipment. However, you can review the matrix for SAP NetWeaver 2004s (the platform needed for V7)."
    -So, u r confirming that Visual composer 7 (04s) needs the SAP Netweaver 2004s plataform to run ?
    I search all the matrix, master guide, installation and I cant find any info about this, I just wanna know if VC7 can o can not be used in SAP Netweaver 2004. And in the case that it can if there r some limitations.
    Thx

  • Where can I get a list of all Oracle products available in the Cloud?

    All Oracle Products available in the Cloud can be viewed here
    Applications can be accessed under dedicated "Knowledge Zones" where you can have insightful information about the product, how to develop, implement, market and sell the solutions. Also, under "Join the discussion" tab, you can engage with Oracle and follow the discussion on dedicated social media channels.

    LOL what a useless doc.  Maybe https://support.oracle.com/epmos/faces/DocumentDisplay?_afrLoop=612452503286937&id=1337394.1&_afrWindowMode=0&_adf.ctrl-…
    is a bit better, but good luck trying to be Itanium specific.
    Edit:  Well, so much for trying to paste in an MOS doc link.  It's called 10.2.0.5 Patch Set Updates - List of Fixes in each PSU [ID 1337394.1]

  • Is Oracle Virtual box VM for AIA11g products available?

    HI All
    Is Oracle Virtual box VM for AIA11g products available?
    Regards
    Arun

    Thanks for your reply, Lajos.
    Is it available by post then? One of our customers is apparently using it & we need to copy their environment.
    Nick

  • I just dowload and pay the new LR6. I already have the LR 5.7 on my PC with OS 8.1 64bits - when I try to enter the serial number Adobe informs me that there are no eligible product available - the list doesn't include the LR6 version ?

    I already have the LR 5.7 on my PC with OS 8.1 64bits - when I try to enter the serial number Adobe informs me that there are no eligible product available - the list doesn't include the LR6 version ?

    thank you very much!
    everything's allright
    bye

  • Product Availability - XEON processor

    Hi
    I am looking to install SCM 5.0 on Windows 2003 64 bit and MS SQL 2000, looking at the PAM availability, it appears its available for X64 and IA64 :
    MS SQL SERVER 2000  WINDOWS SERVER 2003/X64 64BIT 
    09.12.2005  Released      
    MS SQL SERVER 2000 IA64  WINDOWS SERVER 2003/IA64 64BIT  30.01.2006  Released  
    The server we are using is a x3850, 4 x Xeon Dual Core 7150N 3.5GHz/667MHz/16MB L3
    I am correct in undertsanding this will need the X64 version of SAP? IA64 is Itanium isn't it?
    Also, is there anywhere on SAP that shows Product availability to CPU compatibility, all I can find is Product availability to OS/DB release, not if it is compatible with a particular processor, I would like to see how many SAP's this processor combo will deliver?
    Thanks.

    Hi Paul,
    XEON chipset is fully supported for sure.
    The number of SAPs is hard to tell... You can get a quicksizer report then forward it to your hardware vendor/partner. Also the final performance depends on how SAP is installed, configured, and tuned - information just unknown at the early stage. Choosing an expandable platform could help in the long term.
    Best regards,
    Victor

  • GATP - User exit during product availability check

    Hi,
    Is there any method (e.g. user exit)  to confirm the stock based on batch characteristic in APO during product availability check? i.e. before confirmation of the stock some validation needs to be put by reading the batch characteristics.
    Let me know if further clarification is required.
    Regards,
    RS

    Hi Manimaran,
    thanks for the reply,
    Actually we are not using class 400. The confirmation of stock should be done by reading the batch characteristic value because we want to put validation on the characteristic value. This should happen during product availability check.
    Is this possible based on batch class (023) and without using class 400.
    Regards,
    RS

  • Product availability check - changes to delivery proposals

    Hi all,
    At the time of sales order creation, product availability check takes place in APO
    Some validations are required to put in place before system gives delivery proposals in APO screen. This is required before the proposal screen is displayed. e.g. change the quantity proposed.
    Is there any way ( e.g. user exit) to achieve the same ON APO SIDE  ?
    On ECC side, user exit APOAT005 is available which can be used to change confirmed quantities. But requirement is to change it in APO before the proposals are given.
    Regards,
    RS

    Hello Pawan ,
                            Can you please throw some light on this situation
                  We are currently using CTM to generate Purreq(Location B) and Preqrel (Location A). Then we are doing an ATP check the sales order at B is getting a confirmation quantity but in RRP3 we cannot see a confirm quantity agaianst the Purreq nor Preqrel.
    Say this result is after CTM run and ATP
                                                B                                           A
                                                                                          Stock (2,2)
                                               Sales order (2,2)               
                                                Pur req (2,0)                             Preq rel (2,0)
    Now those quantities are the (Rec/ReqQTY ,Confirmed QTY).....now in the above scenario the Product Availability at A should show Cumulative ATP as 0 but it is still showing as 2 ...that is because the confirmed quantity against Preq rel is 0.
    Now when we run RulesBased stock transfer using BOP...we have the following results.
                                                  B                                           A 
                                                                                          Stock (2,2)
                                               Sales order (2,2)               
                                                Pur req (2,2)                             Preq rel (2,2)
    Can any one throw some light on what is happening ....it seems the ATP is not giving confirmed quantitties against the Stock transfers generated by CTM .
    REgards,
    Nick

  • Product Availibility at Catalog Level

    Hi All
    Is there any way to display product availibility information at individual product level within Product Catalog?
    Thanks in Advance.
    Thanks
    Avi

    AFAIK in the standard application the availability information will not be available on the PC. The reason is there is no "order simulation" that happens before the PC is constructed. It can however be achieved with some custom enhancements to the backend FM to loop through all the products and call the availability check BAPI and then store the results as an attribute of the product. Please note that this may not be very performant.
    PS: Assuming that you have the ISA integrated to the ECC system and not CRM.
    Pradeep

  • Is this product available on DVD?

    Is this product available on DVD?

    I don't think that you can always get them direct from Adobe - it may depend on where you live.
    You can usually buy a boxed version from places like Amazon - you have to watch out because some of those places sell the download version. I have bought a boxed set with a DVD in it.
    Brian

  • Product Availability Martrix for Portal Content

    Hi all,
    (a) Is there a .xls version for the Netweaver 07 Product Availability Martrix.
    (b) Does the portal content portfolio cover all the BP available or is the PAM more comprehensive.
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e06c41a3-0c4c-2a10-e6b9-de473c31b031
    Thanks,
    RR

    Hi Rahul,
    Have you reffered to the PAM here.
    https://websmp206.sap-ag.de/~form/handler?_APP=00200682500000002212&_EVENT=DISPLAY
    The .xls that you have referred to has most of the info.
    Let me know if you are looking for anything in particular.
    Cheers,
    Sandeep Tudumu

  • No product available for your device.

    When I try to download Norton Internet Security Suite I get this message "No product available for your device."
    I recently got a new computer and wanted to install the security suite on it and got this message.  Can anyone tell me why I got this message.

    The compatibiity update for the Comcast version of Norton has not been released yet, but wil be released prior to the guesstimated release date of Win 10 (Juy 29th).  Norton never has supported any OS prior to it's offfical roll out.
    Addtional info in regards to the Beta testing of the retail version of Norton for Win 10 can be found in the following link:
    https://community.norton.com/en/forums/NS_NSBU_Beta_Win10

  • Cannot Install Acrobat 9 Pro Extended - More Functional Product Available

    I am trying to install Acrobat 9 Pro Extended on my new PC. I get an error that a more functional product is avilable on my PC and the install closes. I installed Framemaker 10 before attempting Acrobat 9 Pro Extended. I notice a folder in my files that is Acrobat 10 (but there is no icon or program option in the menus). Is this the problem? Do I need to uninstall Framemaker, then install Acrobat 9, and then reinstall Framemaker? Any help is appreciated.

    Hi, yes, understood that they are different things. However, if I'm to
    rely on the link provided on the first reply then does it follow that 9
    Pro is also not supported on Mountain Lion? I have a MACbook here on OSX
    Mountain Lion, and as I've also mentioned on my first post, I was able to
    install 9 Pro and update it as well.
    It really is just odd that Lion is singled out here. I also checked this
    and there is no mention of problems with updating 9 Pro:
    http://helpx.adobe.com/x-productkb/global/known-issues-mac-os-10.html
    Sorry, but just trying to really find a workaround for this issue right
    now. We though of using X Pro instead but, again, if I rely on the system
    requirements on this link -
    http://www.adobe.com/sea/products/acrobatpro/tech-specs.html - the OSX
    version our user has is still not supported.
    Mac OS
    Intel processor
    Mac OS X v10.5.8 or v10.6.4
    512MB of RAM (1GB recommended)
    1.2GB of available hard-disk space
    1024x768 screen resolution
    DVD-ROM drive
    Safari 4 for Mac OS X v10.5.8; Safari 4 or 5.0.x for Mac OS X v10.6.4
    Thanks.

Maybe you are looking for

  • How to create an Open HUB in BI 7.0 which will be scheduled by a Process ch

    Hi Gurus, Could you please explan me how to create an open HUB which will e scheduleby a process chain? Thank you. BR Pat

  • Windows 8.1 on X301

    Hi Everybody, I installed Windows 8.1 RTM on my X301. I managed to have all perepherics to work, only one which is the qualcomm module and GPS. Can anyone help me on this? Thanks

  • How to install oracle 10g in Solaris10 Container

    I'd like to install oracle 10g in local zone of Solaris 10. But I don't know how to set "set noexec_user_stack=1". Now before install oracle 10g. I created /etc/system file in local zone. The file content is only "set noexec_user_stack=1". And I perf

  • Ipod syncing problem new computer

    first I am not very familiar with ipods and itunes, but this if for my daughter. Old computer crashed windows xp, bought new computer windows vista, downloaded itunes to new computer, connects to ipod and authorized new computer, WILL NOT SYNC, notic

  • UI command to delete file.

    hi, i want to have a command for deleting a file .. it should be a button beside every resource which is being displayed in the KM folder (/documents/kumar). i have seen https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/librar