PLM search (wda_sea_qs) gives page not found when started from portal

In NWBC the PLM search works fine. For result it starts the result webdynpro.
We use PLM from the portal so I have created an iview for the webdynopro wda_sea_qs.
When I click on advanced search or search for something the navigation to the other webdynpro's is not working.
All we get is an new portal page with the message "page not found"
How can I configure the search to work correct from the portal?
Greetings
Rob

I found the answer via this link:
http://help.sap.com/erp2005_ehp_04/helpdata/en/1c/ffdf5fd56444748bb6af29d796d75a/frameset.htm
The iView should contain the following Application Parameter:
FRW_SYSAlias=<System>
This solved the problem.

Similar Messages

SharePoint link says "Page not found" when clicked from an e-mail

I have a published page that opens if I copy and paste the link on the address bar but redirects to "Page not found" if clicked on directly. It works fine if I navigate through the website to the page but if I copy the url from the same page and
e-mail it someone and they click on it, it takes them to the default page not found. I have checked every image and attached document on the page and all are approved/published.

Can you copy the text of the URL that is present in the email as well as the URL itself when navigating to the page directly? My suspicion would be an encoding issue with the URL.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

WD ABAP IView intermitently gives 'Page not Found'

hi,
I have a issue with WDA IView. Works fine stand alone. Works fine on the DEV Portal.
When put on the TEST Portal, 50% of times it works and remaining it gives 'Page not Found' error.
Does it have anything to do with WD or Portal ?
We have a Apache Proxy server for the Portal
BSP Iviews on the same Portal works fine.
Can someone help.
Thanks

Hi There,
Were you able to resolve this problem? If yes, can you please tell me how? We are having a similar issue.
Thx
Preet

WDA IVIEW on Portal gives 'Page Not Found'

hi,
I have a issue with WDA IView. Works fine stand alone. Works fine on the DEV Portal.
When put on the TEST Portal, 50% of times it works and remaining it gives 'Page not Found' error.
Does it have anything to do with WD or Portal ?
We have a Apache Proxy server for the Portal
BSP Iviews on the same Portal works fine.
Can someone help.
Thanks

Hi Volker,
Thanks. As far as I know, the TEST is only single server landscape. The APACHE Proxy handles the User Requests and sends the URL to the application server. The PROXY Resides on Same Box as the Test portal.
It works sometimes and dosen't at other times ......
Is the proxy filtering the URL /sap/bc/WebDynpro......
DOn't know what
I deactivated the Short HTTP Error link. I get following dump :-
Not Found
The requested URL /sap/bc/webdynpro/sap/zlckpt_wd_main/;sap-ext-sid=CSWMxYUGSK93xnmBvg==nZOOiTAbzmcJ/+PXpofIog== was not found on this server.
Apache/2.0.52 (Unix) DAV/2 mod_ssl/2.0.52 OpenSSL/0.9.7d Server at usorlu88.xxxxx.com Port 443

WRT310N returns "page not found" when attempting to change _anything_

I just switched from ADSL (Bell Canada) to cable (Rogers). I am trying to change over the settings on my WRT310N. I logged into the router using Safari, which worked perfectly. However, when I selected the pop-up for the connection type, as soon as I let go of the mouse it tries to go a page called "/apply.cgi", which gives me a Page Not Found. After several attempts and checks, it was definitely NOT saving the changes. I then experimented with other pages and found that the same problem happens on every single setting on every page.
Any ideas?

How do you know its a MAC since Safari works for both MAC and PC. I took a guess.

Page not found when connecting to server (if not logged in on server)

Hi,
When we try to connect to the presentation server (http://esddev02:9704/analytics/saw.dll?Dashboard) we get a page not found error if I don't open a remote desktop connection session on the server first.
I suppose the problem originates in the fact that the installation of the software has been done with my credentials on the server.
The windows services start with 'Local System' as logon but the OC4J seems to start only when I log on with my user.
I don't see a reason for this as in the registry the OC4J start command is found under HKEY_LOCAL_MACHINE.
Changing this to "D:\OracleBI\oc4j_bi\bin\oc4j.cmd -start& " did not change anything.
Has somebody got a clue?
Tx for any advice,
Kris

Hi,
I checked further on this today. Problem is not solved yet. I need to find a way to start the OC4J server independent from my session on the server.
Has anybody got some advice?
Brgrds,
Kris

Syncing files constantly issue & page not found when trying to access a file on web

Can anyone assist with syncing issue. Syncing runs all day and new files are not syncing. I can see the files in web browser (not in desktop APP) however when I try to access the files I get page not found.
I went into archive (after reading all the forums I coudl find) and I think there are a couple of damaged files as when I tried to delete them I received an encountered 'error' and could not permanently delete.
I need assistance to get my syncing fixed, and page not found fixed.
Help!
Thanks@

There can be a number of causes for not being able to access file form web browser. One, you might be writing to wrong directory. Two, you might not have sufficient privileges to either write to directory or overwrite files already in that directory. From your description, it's the latter of the two, so you need to get a hold of creative cloud support and get file/folder permissions fixed. Good luck.

Why HTTP 404 Page not Found when trying to Backup Configuration?

Good day:
I bought this RV082 VPN Router. After configuring it, I tried to save its configuration using the System Management's Backup Utility. When I set everything up and ready to proceed, as I click on the Backup Configuration button, I get this Page Not Found error.
After several additional retries, and cold startup of my laptop, I still get this.
Then I wondered, "Why don't I try to upgrade the firmware instead?".
Guess what: I get the same page not found error.
Can anyone tell why is this? Using Windows 7 Pro 32-bit.
Thanks in advance!
Javier.
P.S. I have replied to another thread about not getting connected with Quick VPN to the RV082, which is another painful trouble I've got with it.

Hi Rybak,
Thanks for your reply.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
If clean Cache cannot resolve this issue, please try to repair your TFS 2013 Update 4 Server, then check the result.
Additionally, you can run TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

TFS - Access Level - page not found when trying to add user

When I'm trying to modify some group under Limited Access Level I cannot do that because of the following error:
Page not found.
wrapErrorCallback/</<@server/tfs/_static/tfs/12/_scripts/TFS/debug/Presentation/Scripts/TFS/TFS.Core.Ajax.js:175:37
endRequest@server/tfs/_static/tfs/12/_scripts/TFS/debug/Presentation/Scripts/TFS/TFS.Core.Ajax.js:114:17
wrapErrorCallback/<@server/tfs/_static/tfs/12/_scripts/TFS/debug/Presentation/Scripts/TFS/TFS.Core.Ajax.js:141:1
jQuery.Callbacks/fire@server/tfs/_static/3rdParty/_scripts/jquery-1.8.3.js:984:10
jQuery.Callbacks/self.fireWith@server/tfs/_static/3rdParty/_scripts/jquery-1.8.3.js:1094:7
done@server/tfs/_static/3rdParty/_scripts/jquery-1.8.3.js:7815:1
.send/callback@server/tfs/_static/3rdParty/_scripts/jquery-1.8.3.js:8528:8
Any ideas why it happens?
Environment: Windows Server 2012 with latest updates, TFS 2013.4, user which is used for TFS is a member of local administrators group.

Hi Rybak,
Thanks for your reply.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
If clean Cache cannot resolve this issue, please try to repair your TFS 2013 Update 4 Server, then check the result.
Additionally, you can run TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Page not found when trying to go to Calling Features

I am logged into https://www36.verizon.com/fiosvoice/members/default.aspx and when I select "Calling Features" on the left side of the page I get the Verizon Fios Digital Voice "Page Not Found" page.
I am using Firefox 3.5.9.
Is anyone else having this problem?
Am I using the correct URL for Digital Voice?

Same with me and my "Do Not Disturb" feature has been turned on without my knowledge, and now I can't turn it off.
I was able to get through to a rep for FIOS (on the phone with them right now) and they are trying to get a tech to disable that feature.

Page Not Found when trying to find latest BIOS version

Hi,
I regularly get a blue screen with the following error code: 0x0000009c.
According to what I've found online updating my BIOS might solve this.
However, when trying to download the latest BIOS version I'm sent to a 'Page Not Found'-page after selecting my product.
Any advice on how I can find the latest available BIOS update for my product?
My product:
HP Pavilion Elite HPE-110be Desktop pc (Model: WC694AA)
My bios:
5.15 25/06/2010
OS:
Windows 7 Home Premium 64-bit
Thanks in advance,
Steven

Hello @StevenHbe,
You are running the most current BIOS for your computer so at this point the only option you would have is to restore defaults on your BIOS. If you still require help with this please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Error -43 file not found when exporting from QT Pro 7.5

I get the error -43 (a file could not be found) when trying to export into any format from within Quicktime Pro 7.5 (861) which i believe is the most current version. I also cannot perform a simple "save as" to save my video into another name, i dont get an error message for that one, but it just doesnt do anything. Im not sure if there is any point placing this on this forum, but maybe someone at Apple is interested in offering a little support...?

OK so i found the solution myself - seems apple programmers have been not doing their jobs properly, to get this working the file name of the video that i want exported cannot be anything other than in 8.3 format (like old MS-DOS) but it's more than that, even if you do have the file in 8.3 format it still cant be in a directory that has a name longer than 8 characters, or which has spaces in it etc. so in my case i copied my video to c:\temp and renamed all of them to the old MS-DOS 8.3 format, now the export works... amazing I wonder how long i would have waited for apple support if i hadnt resolved this myself.

Server not found when switching from 4g to wifi and vice versa.

I've had this issue for a while across multiple phones and multiple versions of Firefox for Android, and it does not happen with any other browser (which is upsetting). Whenever I am surfing the web and have multiple tabs open, and I switch from 4g to wifi or vice versa, I always get a "Server not found" error on both existing tabs and new tabs. This is an annoying issue that I am surprised to see hasn't been fixed. The only way I've been able to fix it is to quit and relaunch the app. I have tried removing plug-ins and reinstalling, but it has not helped.
Anything I could do to alleviate the issue?
LG G2 and Samsung Galaxy Note 3. Both on Android 4.4.2
Firefox for Android Ver. 35.0.1

''Roland Tanglao [[#answer-698502|said]]''
<blockquote>
Hi scruffy90:
You wrote "LG G2 and Samsung Galaxy Note 3. Both on Android 4.4.2 Firefox for Android Ver. 35.0.1 "
I just tried switching between HSPA+ aka 3G and WiFi on a Galaxy S5 running Android 5 and have had no issues but I think this may have been an issue in the past (I did a search for a bug in bugzilla.mozilla.org but couldn't find anything).
Are there any other details you could provide that could help us debug?
e.g.
# Are you using a proxy?
# Who is your WiFi provider?
# Have you tried other WiFi (e.g. the Wifi both at home and work)
Cheers!
...Roland
</blockquote>
Hello Roland,
No proxy on the phone or wi-fi network.
My ISP is Time Warner, but I supply my own router (Linksys e4200)
And this happens on every wi-fi network, at home and away from home.

Website not found when accessed from iPad

I am hosting multiple websites from a single IP address and have come across the following problem. If I access it from my mac, the correct website is displayed, but if I use my iPad the web site is not found and my default website displays instead.
Checking the access log I can see a clear difference between what is passed from a mac and an ipad but don't know how to fix it, any suggestions greatly appreciated.
The Mac sends this
www.parksurgery-hursleyrd-ppg.org.uk 81.138.225.73 - - [03/Oct/2013:00:15:11 +0100] "GET / HTTP/1.1" 200 4857 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.8; rv:24.0) Gecko/20100101 Firefox/24.0"
The iPad sends this
www.advtraining.co.uk 192.168.1.73 - - [03/Oct/2013:00:22:03 +0100] "GET / HTTP/1.1" 200 7847 "http://www.parksurgery-hursleyrd-ppg.org.uk/" "Mozilla/5.0 (iPad; CPU OS 7_0 like Mac OS X) AppleWebKit/537.51.1 (KHTML, like Gecko) Version/7.0 Mobile/11A465 Safari/9537.53"
the website I am trying to display is www.parksurgery-hursleyrd-ppg.org.uk

Me too. 34000+ items.
Gotta wonder if that's a factor.
Just now I removed all remotes from iTunes.
(Prefs > Devices > Forget All Remotes)
Then I turned on Home Sharing on my iPhone.
(Tap the gear icon in the Library selection screen.)
Previously the iPhone was registered as a regular remote.
So both devices are controlling iTunes via home sharing.
Now iTunes is not crashing at all, in full-screen mode or otherwise.
Not sure if it will last, but time will tell.
Hope this is useful to you.
I'll post back if the crashes return.

RH11 404 - Page Not Found when linking to PDF file from search results using IE9 and IE10

I'm using RH11 (11.0.3.268) and I've included a number of PDF files as baggage files. The hyperlinks on the pages work fine and display the PDF files in a separate window, as expected. However, when searching for these same PDF files using the Search tab, I'm getting a 404 error with the filename. The description on the error shows the filename and says the "the requested resource is not available." This is occurring using IE9 and IE10. And, it only happens within the application, which packages the WebHelp with a war file.
I searched the forum and found where someone was having the same problem on Firefox, but was fine on IE. But, as mentioned, I'm finding it on IE.
Thoughts on how to fix this error?

Is the WAR file extracted at the point when the search is done? If not, I would expect it to fail.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

PLM search (wda_sea_qs) gives page not found when started from portal

Similar Messages

Maybe you are looking for