PLM system integration

Hello,
Does anybody read this technical white paper about the benefits of rights management?
www.adobe.com/products/livecycle/pdfs/95010482_lc_rightsmgmt_wp_ue.pdf
See the page 3, "Company M".
How exactly this works? What is the Authorization SDK for native PLM integration?
But perhaps the most important question is: How can be done the integration betwen Livecycle RM and Teamcenter as showed in the Company M case.
Thanks for any suggestion.
Diego

Hi Stanislav,
As this Enovia is product lifecycle management (PLM) tool there is not special adapter to make integration with this Enovia.
If this integration requires more number of interfaces you can proceed with developing new ADAPTER.
else
you need to create one FTP Service on Enovia system so that SAP PI File adapter will place the file into that FTP service of Enovia.
thanks,
madhu

Similar Messages

Connecting SAP PLM system to iview portal.

Hi experts i want one clarification on process of connecting SAP PLM system to iview portal.
here my scenario is SAP PLM->>>XI--->>>WEBSERVICES
RFC-->>XI--->>>>SOAP
1---->>here i have to get the list of all materials from SAP PLM using iview as
front end tool.
2---->>and the next thing is if the material is camera means it should require the
lengs software for the camera.In the iview we can select the material
for upgrated software.
3--->>after that the input parameters wil be sent to webservices
(some website) using XI part(mapping and all) and the response should come back then it has
to be stored in the SAP PLM system.
please clear me all the above questions.
thanks & regards
babu

HI,
See
1) Request is sent from the Portal.
2) Web Dynpro application is called through the URL.
3) Web Dynpro app makes use of Web Service based Model in sending SOAP request to XI.
4) SOAP adapter converts the incoming SOAP message into XI Message.
5) Synchronous call is made from XI to R3 backend using RFC adapter.
6) Response is mapped and routed back as SOAP message.
Necessary design steps in interface objects, mapping objects and Business process are created according to the functional requirements.
Sender Soap Communication channel is setup in Configuration along with other essential configuration steps.
WSDL is generated for the message interface in Integration Directory using Tools-->Define Web service.
Override the default URL with following while generating WSDL.
See the below link
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1334 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Regards
Chilla

Unit testing and system integration testing for crystal report

Hi gurus,
I am creating crystal report by oracle procedure, will you please tell me how to do unit testing and system integration testing? appreciate very much.

The focus of this forum is report design. The actual testing of reports would be subject to your own internal policies and procedures.
Jason

BI System Integration using EP iView Template

Hi,
Can u plz provide me POC, step by step process of below 2 que.
1. BI System Integration using EP iView Template.
2. BI System Integration using Federated Porta
Thanks
Prakash

Hi,
select your workset or folder where you should create the iview. Right click, it show you context menu, put create iview. You will have any options, one is BI, select this option.
Best Regards,
Conrado
www.forosap.com spanish forums

"System Integration" window pops up every time Thunderbird starts

I have a problem with "system integration" window.
Thunderbird shows this window on every launch. I've unchecked option in "Preferences->Advanced->General" (I have localized version, so maybe there is spelling errors), but it changes nothing.
Thunderbird version: 24.5.0
OS: Windows 7 SP1, x64
Thunderbird is default mail client according to system settings.
P.S. There is also copy-paste of troubleshooting info from Thunderbird:
<--------------------------------------------------------------------------------------->
Сведения о приложении
Имя: Thunderbird
Версия: 24.5.0
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.5.0
Папка профиля: Показать папку
(Локальный диск)
ID сборки приложения: 20140424091057
Включённые плагины: about:plugins
Конфигурация сборки: about:buildconfig
Сообщения о падениях: about:crashes
Использование памяти: about:memory
Учётные записи почты и новостей
account1:
INCOMING: account1, , (imap) imap.yandex.com:993, SSL, passwordCleartext
OUTGOING: smtp.yandex.com:465, SSL, passwordCleartext, true
account2:
INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
Расширения
Важные изменённые настройки
Имя: Значение
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
extensions.lastAppVersion: 24.5.0
font.name.monospace.el: Consolas
font.name.monospace.tr: Consolas
font.name.monospace.x-baltic: Consolas
font.name.monospace.x-central-euro: Consolas
font.name.monospace.x-cyrillic: Consolas
font.name.monospace.x-unicode: Consolas
font.name.monospace.x-western: Consolas
font.name.sans-serif.el: Calibri
font.name.sans-serif.tr: Calibri
font.name.sans-serif.x-baltic: Calibri
font.name.sans-serif.x-central-euro: Calibri
font.name.sans-serif.x-cyrillic: Calibri
font.name.sans-serif.x-unicode: Calibri
font.name.sans-serif.x-western: Calibri
font.name.serif.el: Cambria
font.name.serif.tr: Cambria
font.name.serif.x-baltic: Cambria
font.name.serif.x-central-euro: Cambria
font.name.serif.x-cyrillic: Cambria
font.name.serif.x-unicode: Cambria
font.name.serif.x-western: Cambria
font.size.fixed.el: 14
font.size.fixed.tr: 14
font.size.fixed.x-baltic: 14
font.size.fixed.x-central-euro: 14
font.size.fixed.x-cyrillic: 14
font.size.fixed.x-unicode: 14
font.size.fixed.x-western: 14
font.size.variable.el: 17
font.size.variable.tr: 17
font.size.variable.x-baltic: 17
font.size.variable.x-central-euro: 17
font.size.variable.x-cyrillic: 17
font.size.variable.x-unicode: 17
font.size.variable.x-western: 17
gfx.direct3d.last_used_feature_level_idx: 0
mail.openMessageBehavior.version: 1
mailnews.database.global.datastore.id: c6172aea-0da2-4844-ae19-ce53e3c859a
network.cookie.prefsMigrated: true
places.database.lastMaintenance: 1400568965
places.history.expiration.transient_current_max_pages: 104858
plugin.importedState: true
Графика
Описание видеокарты: Intel(R) HD Graphics
Код производителя: 0x8086
Код устройства: 0x0102
Объём видеопамяти: Unknown
Драйвера видеокарты: igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32
Версия драйвера: 9.17.10.3517
Дата разработки драйвера: 3-20-2014
Direct2D включён: false
DirectWrite включён: false (6.2.9200.16492)
Параметры ClearType: Параметры ClearType не найдены
Визуализатор WebGL: false
Аппаратно ускоренные окна: 0
AzureCanvasBackend: skia
AzureFallbackCanvasBackend: cairo
AzureContentBackend: none
JavaScript
Инкрементальный GC: 1
Поддержка доступности
Активирована: 0
Отключение поддержки доступности: 0
Версии библиотек
Ожидаемая минимальная версия
Используемая версия
NSPR
4.10.2
4.10.2
NSS
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS Util
3.15.4
3.15.4
NSS SSL
3.15.4 Basic ECC
3.15.4 Basic ECC
NSS S/MIME
3.15.4 Basic ECC
3.15.4 Basic ECC
<--------------------------------------------------------------------------------------->

No, Thunderbird is the only e-mail client installed.

Third Party Systems Integration with SAP Business One

Different techniques are available in SAP Business One for Integration such as DI API, DI Server, B1WS, etc. In this blog article we tried to describe the architecture and details of different techniques through which ‘Third Party Systems Integration with SAP Business One’ usually happens
Third Party Systems Integration with SAP B1 - APPSeCONNECT

Hi,
Thanks for sharing such excellent blog with advantage and limitations.
Thanks & Regards,
Nagarajan

What is the role of system integration?

hi friends,,
i got job in one company. they gave me the role of system integration. may i know what is the role of it? what type of topics i should prepare tharoughly? give me suggestions and some work

Hi Srinivas
Pls follow the below mentioned links to know more about system integrator's job:
http://en.wikipedia.org/wiki/System_integrator
http://www.cmcltd.com/sbu/systems_integration.htm
http://www.artima.com/lejava/articles/javaone_2007_talend.html
http://www.bitpipe.com/tlist/Systems-Integration.html
Pls reward points.

UPGRADE THE PLM SYSTEM FROM NWBC 731 TO NWBC 740

     Hello,
     We want to Upgrade our PLM system from NWBC 731 to NWBC 740, for this it is better to have a SANBOX system to upgrade there first the NWBC740 and do some tests. And if everything is in order to Upgrade in the same time the DEV and TEST system?
     Do you now a better way to do such an upgrade?
     Thanks in advance,
     Florin Bosorogan

Hello Florin
Transporting across different BASIS releases is generally not a good practice and this is one of the main reasons why SAP insists on having the systems on the SAP landscape on the same release and patch level.
There shouldn't be a big gap in the time for starting the upgrade on the test system.
If the upgrade on the development system went fine then I would start the upgrade on the test system immediately.
I wouldn't basically let the development team transport the developments created after the development upgrade to the remaining systems in the landscape (especially production) until I complete the upgrade on the production system. The upgrade process is a planned activity.
Yes transporting a transport request across different releases is possible and SAP has their recommendations for that.
If there is a need to transport some emergency changes to the other system then it should done after consulting with the ABAP team about the possible impact on the system.
Regards
RB

REG:REGRESSION & SYSTEM INTEGRITY TEST

Hi experts,
i have one question i dont know it may be basic question. i am new to xi/pi can you please tell me
how we test & what the purpose of the REGRESSION TEST,SYSTEM INTEGRITY TEST,PERFORMANCE TEST
what are the differences between these three test in pi
thanks in advance
koti

Hi
From the point of view of PI landscape and testing methodologies :
Performance testing
1.To Test the systems load tolerance .Its purely physical testing and no application logic is tested in this.One case may be to check the system performance like how much time is taken if multiple users assess the system or say create orders using the interface.
2.There may be several ways u can design an interface to make the business logic to work.(say with BPM or without BPM).So in PT you can evaluate system performance and decide on which approach is best suited.
3. It might be useful to fix any hardware sizing issues also.
4.Usually done in pr- prod system say after a system refresh or migration etc.
System Integration Testing--
1. To test end to end business logic and functionality when all the systems in the data flow are connected and individual unit test is already done (say ECC,PI and third party ).
2. helps is checking the connectivity, execution of functionality.Basically it can be a functionality test.
3.Done after Dev and before User acceptance testing.
Regression testing----
1. Its done when there are changes made to functionality/data , before and after test scripts are prepared and executed.
2.its helps in checking if the changes made will effect any exisiting functionality ,basically before and after the change the existing functionality should not effect but the required changes should reflect.
3.Done after a fix in code and before moving it to prod.
You can refer this like alsohttp://wiki.sdn.sap.com/wiki/display/ERPLO/TypesofTestings
Best Regards,
Srinivas

System Integration

Hi all!
I'm begining to design(or helping the analists to) an application and I'm showing a problem that we're going to have. The application will have to make some integrations with other systems(they are about 8 systems). And we don't know exactly how/when the people who develop the other 8 systems are going to develop those integrations.
We'll design the interfaces for the system integrations but I was thinking if there's a pattern that can make our life easier. I thought in a pattern that perhaps could be used is the bussiness delegate or a kind of factory, because the bigest problem that I see is that the peolpe who develope those other systems can decide to not implement my interfaces and say that they already have classes that make the same and don't need to reimplement those things.
Any help will be appreciated :D
thanks in advance.

Is it a data intergration or more than this?

Java Stack mandatory for a SAP BI system integrated with EP?

Hi Guru's,
Currently we are using SAP NetWeaver 2004 s version 7.0 system for our BI.
This is integrated with the EP. But our BI system does not contain the Java Stack installed.
When we work on WAD templates and execute the template, it is automatically directed to EP portal where we can see our reports.
Here my question is do we need Java Stack for this system to use ADOBE DOCUMENT services or can it work with EP only for the web functionalities.
Any info on this is of great help.
Best Regards
Kumar

HI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar

General Ledger - System Integrity and Control Check

Our SAP Business One system receives input from various sources on a daily basis. Therefore we would like to establish a business process to ensure balancing of the books and monitoring of suspense accounts.
How do we develop reports to check the following 3 items;
1. Business Units (On and Off Balance sheet accounts not balancing to zero and Monitoring specified category of accounts)
2. Ledgers Vs Journal integrity (Ensuring Journals, Detail Ledger and Daily Ledger are all consistent at all points of time)
3. Financial integrity (Comparing the balances held between the detailed Ledger, Monthly Average Ledger and Yearly Average Ledger - ensuring they are synchronised at all times)

Hi,
Please refer SAP note for GL variables. Note that it may be difference from version to version.
867048
- List of variables for designing the General Ledger layout
A complete list of variable can be downloaded from SAP business one customer portal. To access below link, you need S-user ID and password
https://websmp201.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000680316&_SCENARIO=01100035870000000183&_ADDINC=011000358700002837782005E&
Thanks & Regards,
Nagarajan

Project systems integration with portal (EP)

Dear all,
I have to integrate the projects systems module with Portal.(EP)
In portal transactional I views can be used to create projects which can be store in the R/3.
Now the issue is to create projects with out using Transactional I views. This should be a simple entry through portal, where in the user keys in the key fields and there by the project is created and scheduled.
For this I have tried with using business packages given by SAP to integrate with portal.
Now the issue is I can display the projects that are created in R/3 through portal and display the necessary fileds required for viewing (I views). Now the main problem is to create the project using these business packages so that the same get updated in the R/3.
But business packages do not have the option of creating the project. I am using the business packages for projects 50.3.1
Has any body come across this type of issue which has to be integrated with portal and subsequent creation of projects through portal
If any body has done this in any other way please kindly share on this.
Experts please throw some pointers on this.
Regards.
Vara Prasad

Hi Aman,
You may try creating transaction iViews of the desired PS Transaction.
For more help you can take help of your Portal Administrator.
Else, see if this link may help:
http://help.sap.com/Business_Packages/EN/06/3ED93BE53BCD29E10000000A114084/frameset.htm
Regards,
Vivek Pandey

SAP Erec System Integration with Portal

We have installed a new erec system in Sap nw 7.02 abap system which has to be integrated with Existing portal system. There is another existing HR system(ecc6.0 ehp ) which is already connected to portal. What are the steps to be followed for Integrating Erec system with portal.
Thanks.

Dear Colleagues,
We have similar situation and this week we hopefully will approach to integrate ERECRUIT with SAP Portal. We have recommendations from consultants but since ERECRUIT implementation is still no commodity’s I’d like to confront this recommendations and share experiences. Please have a look on the the thread about it:
ERECRUIT 606 integration with SAP Portal 7.31 - what to take in mind?
Cheers
Waldek

Backend system Integration and OrganiZation Structure set up in SRM 7.01

Dear SRM friends,
I am a new entrant in SRM. We are trying to setup a system where the SRM (7.01) box is connected to the ECC 6 - Ehp4 box.
Can any one share with me the initial setup that is required to be done. Also if you can share some information on the backend integration (in our case back end is a ECC system).
We have a plan to replicate the Plan driven procurement in SRM using ECC as backend. So the blue print plan is to create a PR thru MRP run in ECC and this PR will trigger the Shopping cart in SRM system. And then assigning source and PO creation happens in SRM system.
If you can tell me the settings required for building this demo, I would be hugely benefited. Your valuable answers will be duely rewarded.
Looking fwd to hear from you.
regards
Arindam.

Hello,
Kindly check the configuration guides at the SMP.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.01 -> Configuration Guides for SAP SRM 7.01
You will all the relevant scenarios config documents here.
Best Regards,
Rahul

PLM system integration

Similar Messages

Maybe you are looking for