PLM550 SAP Resource- und Portfoliomanagement – RPM 5.0

Für Berater und Projektteammitglieder, die vor der Einführung von SAP RPM 5.0 stehen, bieten wir im Q1/2011 wiederum den PLM550 an.
In diesem Training werdenFunktionen, Prozesse und Integrationsmöglichkeiten von SAP Resource and Portfolio Management erörtert sowie Portfolios, Portfoliohierachien und -elemente im SAP Enterprise Portal erstellt. Dazugehörige Customizing-Einstellungen im SAP RPM-Core werden ebenso erklärt.
Weiters behandelt der Kurs die strategische Finanz- und Ressourcenplanung in SAP RPM und es werden Fragebögen und Bewertungsmodelle definiert. Ebenso werden Projekte in cProjects 4.5 erstellt und bearbeitt (ohne Customizing).
Neuer Termin:
SAP Wien 21.03. u2013 25.03.2011 (5 Tage)
Weitere Informationen unter: http://www.sap.com/austria/services/education/schulungskatalog/globaltabbedcourse.epx?context=%5b%5b%7cPLM550%7c%7c1%7c095%7cAT%7c%5d%5d%7c

Thanks very much for taking the time to post the info Florian. I will update this thread as well if I run into any new information.
Do we have any idea on SAP's direction for Product Definition? PD is still version 2.0 and I heard that PD functionality will be incorporated into PPM 5.0 which does make a lot of sense. I very briefly went through the notes and config doc in this post and did not get the impression that PPM has any idea and concept management capabilities.

Similar Messages

Enterprise Portal SAP Resources are not starting on Box2...

Dear SAP World,
We implemented EP HA project using Two server boxes(2 server nodes). we are using first server box for SAP resources and second server box for Oracle DataBase resources. If i try to take SAP resources online on Box2 then SAP is failing to start over there.
I observed on Box2 using SAP MMC that always CI resources are trying to start before SCS starts over there that causes i am getting the following errors on default trace files, like some times CI Resources are not able to attach Message Server Port(3901) and some times CI resources failed to connect Enqueue Server Port(3201).
#1.5 #000E0CEB487100000000000B0000154800046F03ABF4845A#1247961467366#com.sap.engine.core.cluster.impl6.ClusterManagerImpl##com.sap.engine.core.cluster.impl6.ClusterManagerImpl.init(java.util.Properties)#######Thread
[Thread-1,5,main]##0#0#Fatal#1#/System/Network#Plain###Cannot attach to
the Message Server. Can't open port [3901] on host
[EPHASAPGRP/10.224.4.133] (Connection refused: connect).#
#1.5 #000E0CEB4EB30043000000070000176400046F4DD740D3A6#1248280020591#com.sap.engine.core.locking.impl3.LockingManagerImpl##com.sap.engine.core.locking.impl3.LockingManagerImpl.jenqulib####n/a##7b05966076dc11deb181000e0ceb4eb3#Thread[SAPEngine_EnquReader,5,main]
##0#0#Error#1#/System/Server#Plain###Encomi: failed to connect to
EPHASAPGRP/3201/Connection refused: connect)#
From SCS01 log i found the below error
HSEA\nepadm is stopping SAP System at 2009/08/16 6:14:44
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753
[sapwinha.cpp, line 212]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL
[sapwinha.cpp, line 907]
All the times we observed on Box2 that CI resources are trying to start before SCS resources starts.
There is no problem for SAP resources on Box1. Intitally We installed SAP on Box1 and did the configurations on Veritas Cluster Application for achieving switch over or High Avaliablity environment.
Please kindly suggest the solution.
Kind Regards
Sudhakar A

Naeem,
It appears the port 8888 is already in use by another app or the bus is already running. try to identofy the app that is using the 8888 port or just change it to a different port, ensure that you have followed the installation guide and configure all the ftp settings and have added a local HM
Let us know how it goes,
glen

Server crash due to SAP resource

During the execution of a report of type "Resource Status Report" which helps in examining the Test connection of each resource configured, the server gets crashed.
When we go through the logs, its was due to the SAP connection.
We have 7 SAP resources configured. Each of the SAP resource's Test connection was succesful.
These are the scenarios tested
When we ran the report WITHOUT the SAP resources the server was not crashing.
When we ran the report with ONLY SAP resources the server did not crash.
Only when all the resources are put together and executed we have a huuuuge problem. Can any thow some ideas on this ??
Thanks in advance.

Hi,
Did you resolve this issue? I have the same problem. I appreciate if you could please let me know what the problem was.
Thanks

Der neue SAP Schulungs- und Zertifizierungs-Shop

Besuchen Sie unseren neuen SAP Schulungs- und Zertifizierungs-Shop u2013 die zentrale Anlaufstelle rund um Schulungen und Zertifizierungen.
In einer völlig neu gestalteten, zentralen Einstiegsseite können wir Ihre Anforderungen rund um SAP-Schulungen noch besser abdecken. Hier können Sie Ihre Ausbildungsbedarfe planen, Sie können Schulungen buchen und Trainings einkaufen. Werfen Sie einen Blick auf unseren neuen Shop und lassen Sie sich begeistern.
Zugriff haben Sie über unsere Internetseite https://training.sap.com/at.
Unser Schulungsangebot wird regelmäßig aktualisiert und erweitert. Sämtliche aktuellen Informationen über unser komplettes Schulungsangebot (Inhalte, Termine, Preise, Verfügbarkeit freie Plätze usw.) finden Sie stets aktuell im Online Trainingskatalog und unter: http://www.sap.com/austria/services/education/schulungskatalog/index.epx

Hallo!
Die DATEV Schnittstelle über das SAP eigene AddOn kennen alle Berater, die Kunden im Bereich SAP Business One Finanzwesen betreuen, sicherlich in- und auswendig.
Für viele Kunden ist ein Export auf diese Weise vollkommen in Ordnung und ausreichend, und auch noch kostenlos, da es sich ja um ein Standard-SAP-AddOn handelt.
Aber nicht wenige unserer Kunden - bzw. besser ausgedrückt: viele Steuerberater unserer Kunden - haben oftmals Probleme beim Import dieser Daten (und nicht selten schon beim Export aus SBO heraus).
Jedes auftretende Problem ist immer wieder ein Einzelfall, der in Verbindung mit der SAP über eine Meldung bearbeitet und analysiert werden muss. Als Berater hat man selbst keinen Einblick in die Funktionsweise des AddOns.
An dieser Stelle wollten wir unseren Kunden einen Mehrwert bieten, damit der Datenaustausch mit dem Steuerberater reibungslos(er) verläuft. Die Datev-Schnittstelle, die Herr Heering entwickelt hat, bietet diesen Mehrwert.
In SBO werden die gewünschten Buchungen über den Bericht "Hauptbuch" nach Excel exportiert und mit einem Excel-AddIn verarbeitet. Steuerungsmöglichkeiten sind reichlich vorhanden, ebenso ein Hotline-Support, der sich direkt mit dem Sachbearbeiter beim Steuerberater auseinandersetzt - ohne den Kunden oder SAP Berater als Relais-Station zwischengeschaltet zu haben (natürlich nur, wenn vom Kunden gewünscht).
Der Kontakt kann über Herrn Heering oder über mich hergestellt werden.
Viele Grüße,
Jens Kochsiek

Saving a textarea list from a form to attribute string in SAP resource

Hi,
I am trying to save a text area from a form defined as this:
<Field name='accounts[$(RESOURCE_NAME)].assignedProfiles'>
<Display class='TextArea'>
<Property name='title' value='$(RESOURCE_NAME) Profiles'/>
<Property name='rows' value='6'/>
<Property name='columns' value='32'/>
<Property name='format' value='list'/>
<Property name='sorted' value='true'/>
</Display>
<Derivation>
<ref>accounts[$(RESOURCE_NAME)].assignedProfiles</ref>
</Derivation>
</Field>
Into an SAP Resource to the attribute assignedProfiles which is mapped to PROFILES->BAPIPROF
This text area actually outputs a list and saves without error from IDM however, when I check in SAP, it's not reflected, what is happening here, I tried many approaches already, and it's maddening that it doesn't work!
Please help!

So here is a solution I came up with
<cfoutput>
<cfset Servers="#StripCR(Form.ServerList)#">
<cfset Servers2="'#Replace(Servers, "
", " ", "All")#'">
<cfset Servers3="#ToString(Servers2)#">
<cfset Servers4="#Replace(Servers3, " ", "', '", "All")#">
</cfoutput>
Then in the cfquery SQL I used
WHERE Server IN (#PreserveSingleQuotes(Servers4)#)
Right now this is working but it seems very cumbersome. If anyone can come up with a way to simplify this please let me know.

"SAP resource"& "Generic service" go off line on MSCS WEB AS

Hi Guys,
I installed WEB AS STack 15 on MSCS environment,everything was fine untill I insall Enq. Replication server and now on one node "SAP resource"(
"SAP<SID><Instance-ID> Instance") and "Generic service"("SAP<SID><Instance-ID> Service") are offline and I couldn't bring them Online.
Do you have any idea how can I bring them online?
Thanks,
Maryam

Hi There,
I have the exact problem but of my system is
n/w 2004s
win 2003ee sp2
oracle database
after installing ERS(enqueue server) my sap<sid> 01 instance and services are failed and cant be brought online,this always being intemitent and can any one help us both gurus!!!!!!!!

Strange Lookup Error (SAP Resource Adapter)

Hi all,
I received a quite stange error (Below you can see the relavent part of the logfile).
While the first attempt to get the ConnectionFactory of the SAP JRA succeeds, the second one fails. As you can see, context and parameters of the lookup are exactly the same. Does anybody has experiences with this problem?
Thanks a lot
Nadine
<b>1st attempt</b>
DEBUG SAPEngine_Application_Thread[impl:3]_18 com.xxx.ik.ejb.srouter.util.SystemRouterUtil - return jca
name: java:comp/env/SAPJCA
INFO SAPEngine_Application_Thread[impl:3]_18 com.xxx.ik.ejb.sap.generic.bo.SAPGenericBO - search for
JCA Adapter: java:comp/env/SAPJCA
DEBUG SAPEngine_Application_Thread[impl:3]_18 com.xxx.ik.ejb.sap.generic.bo.SAPGenericBO -
connectionfactory: com.sap.mw.jco.jra.JRA$ConnectionFactoryImpl@1d4445d
<b>2nd attempt</b>
DEBUG SAPEngine_Application_Thread[impl:3]_1 com.xxx.ik.ejb.srouter.util.SystemRouterUtil - return jca
name: java:comp/env/SAPJCA
INFO SAPEngine_Application_Thread[impl:3]_1 com.xxx.ik.ejb.sap.generic.bo.SAPGenericBO - search for JCA Adapter: java:comp/env/SAPJCA
ERROR SAPEngine_Application_Thread[impl:3]_1 com.xxx.ik.ejb.sap.generic.bo.SAPGenericBO -
com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at java:comp, the whole lookup name is java:comp/env/SAPJCA.

Hi Vladimir,
First of all, thanks a lot for your answer.
I'm sure the application was not restarted or redeployed (as only about one minute has passed between the two attempts). During the processing of our application, this resource adapter (and the class that calls it) is used two times.
I searched the JNDI tree as you recommended and found:
* ejbContexts [Context]
    * t-systems.com [Context]
      * Integrationkernel [Context]
        * sap [Context]
          * generic [Context]
            * SAPGenericEJB [Context]
              * java:comp [Context]
                ORB
                HandleDelegate
                UserTransaction
                * env [Context]
                  SAPJCA
As I am only migrating this application, I just had a deeper look into method calls.
The application consists of a web app which calls ejbs. The EJBs in turn are just Wrapper for the so called BusinessObjects (Beans). In the first attempt the SAPGenericEJB calls the SAPGenericBO which does the lookup. In the second attempt, the SAPGenericBO is called directly from a workflow-engine. Could it be, that this causes the problem? If so, what can I do? Define the resource reference in the WF-Module too? Thanks...
Nadine
Message was edited by: Nadine Kress

SAP Resources Blog

Hi
I have been teaching SAP for a long time. Another role I have is with the SAP Australia User Group. I am responsible for advising on content for events. Part of this process requires me to view a huge amount of SAP related events and resources.
I often think that many of these resources would be of value to the staff at Victoria University who are involved in teaching SAP applications. Usually I pass the file or link onto those staff. I havebeen thinking for a while how can I share these resources with other UAP members. To date I have been posting these in the forums but after a period of time the references to resources become harder to find as the forums grow. I have decided to create a blog which lists the resources as I find them.
I hope I have the motivation and energy to maintain the blog.
The blog can be found at /people/paul.hawking3/blog
Good luck
Paul Hawking
SAP Academic Program Director
Victoria University
Australia

hi,
the link is working and you can still access that - I've just tried
Regards,
Michal Krawczyk

Migration of documents from a http content server into sap kpro und sap dvs

hello,
I want to migrate documents from an http 4.5 content server into the sap knowledge provider (kpro) and in sap dvs with an abap program.
I know I have to create a PHIO and a LOIO and write it in the tables DMS_PH_CD1 and (only the LOIO) in DMS_DOC2LOIO.
Where I have to write my url for accessing the document on the content server?In which table?
What fm´s do I need to create the PHIO´s and LOIO´s?
Has anyone an idea and hints (like weblinks) to integrate documents from an content server into kpro and sap dvs?

Hello,
the private key, where the hash is signed with is stored
in your AppServer directory $DIR_INSTANCE/sec and is
called SAPSYS.PSE. Where the PSE is a secude (www.secude.de) specific format which contains the private and the publik key.
But I guess you won't get the private key, because its private, unless you are the Administror
Then signig is done via the normal industry standards. (http://www.rsasecurity.com/)
regards,
mumba.

Start Of Ramp-Up for SAP Portfolio and Project Management 5.0

Start Of Ramp-Up for SAP Portfolio and Project Management 5.0
Starting with this new release, the application SAP Portfolio and Project Management 5.0
replaces both the SAP Resource and Portfolio Management (SAP RPM) application and the
Collaboration Projects (cProjects) application.
Start of ramp-up for SAP Portfolio and Project Management is 19th of April, 2010. The end
of ramp-up is currently scheduled for 19th of October, 2010.
Functional Innovations And New Features
A detailed description of all new and/or enhanced functional innovations and features can
be found in the Release Notes:
[http://service.sap.com/releasenotes |http://service.sap.com/releasenotes]
-> SAP Solutions
    -> Release Notes SAP Portfolio and Project Management
There are some SAP Notes which are in general very important for SAP Portfolio and Project
Management 5.0 and which also serve as central points of entry to find import information:
SAP Note [1377104|https://service.sap.com/sap/support/notes/1377104]      FAQs - SAP Portfolio and Project Management 5.0
SAP Note [1402912|https://service.sap.com/sap/support/notes/1402912]      PPM 5.0: Supported Browsers, Java versions, etc.
SAP Note [1411953|https://service.sap.com/sap/support/notes/1411953]      PPM 5.0: Configuration Content
SAP Note [1436778|https://service.sap.com/sap/support/notes/1436778]      SAP Portfolio and Project Management 5.0: Restrictions
Kind regards,
   Florian

Thanks very much for taking the time to post the info Florian. I will update this thread as well if I run into any new information.
Do we have any idea on SAP's direction for Product Definition? PD is still version 2.0 and I heard that PD functionality will be incorporated into PPM 5.0 which does make a lot of sense. I very briefly went through the notes and config doc in this post and did not get the impression that PPM has any idea and concept management capabilities.

Difference between SAP-PS, SAP_RPM, Cprojects, SAP-ppm

Hi
can anyone please tell me the difference between
1. SAP-PS
2. SAP Resource and Portfolio Management (SAP- RPM)
3, SAP Project Portfolio Management SAP-PPM)
4. cProjects
Thanks..

Hi Julio
1. SAP-PS --> Project Systems SAP ERP based Project Management tool. It is tightly integrated with SAP Core modules like MM,SD,FICO.
it is SAP GUI based just like other core modules. it is used in project oriented scenarios like EC&O, real estate, complex MTO scenarios.
2. SAP Resource and Portfolio Management (SAP- RPM) --> SAP Enterprise Portal based Resource and portfolio management tool, it is used to manage portfolio of multiple projects, proposals, initiatives. Its UI is SAP Enterprise portal and it is integrated with SAP cProjects/ SAP PS.
3, SAP Project Portfolio Management SAP-PPM)
Same as 2, but SAP is now using term PPM for next relelases of xRPM, SAP is coming up with SAP PPM 5.0 ,
current version in market is SAP RPM 4.5
4. cProjects - It is web based Project Management tool. It is used for simpler projects like IT Projects, R&D projects etc, which does not require very tight integration with SAP ERP core modules. cProjects is integrated to some extent with SAP PS & FI-CO
Hope i have done my best extent to give answer.
Thanks

SAP client and other software on a Virtual Machine

I'm the campus coordinator for a university that is a member of the University Alliances program. This gives us the ability to put the R/3 client and other software on lab machines and also distribute it to students.
Given that we deploy in a shared lab environment on a university campus we often don't have absolute control over things like browser versions, plugins available, security settings, Java version available, and so on. We also only have the ability to do updates, installations, etc. at fixed times of the year.
As a solution for this, we're contemplating creating a virtual machine to be able to control the environment more and also allow the student greater control and customization. At this point we'd be looking at developing a Windows VM, either Vista or XP, that would have the R/3 client, IE with all the correct plugins for running Visual Composer, NetWeaver Developer Studio, and other programs such as Solution Composer. The idea would be that if we need to add a new software resource, change a version, tweak the environment, etc. we could just update and redistribute this virtual machine.
Has anyone here attempted this type of deployment? As we are just beginning, any helpful hints or advice would be appreciated.

I appreciate your willingness to think through this with me and share your expertise.
>
Markus Doehr wrote:
> Why do you think so? The "key" you use during installation is bound to a medium. We also have a license that allows us to fully automatically install Windows XP on our client PCs using Empirum and also install all other necessary software (IE updates, SAPGUI, Adobe SVG, Microsoft Office etc.)
My assumption was that if we had multiple windows instances out there all with the same key (assuming non-volume key) that the piracy protection built into the OS might in some way cause problems.
> (Perhaps not. We're still considering the ins and outs of that.) We're hesitant to put our campus volume license key on these VMs, since one could recover that key from the system and then it could become publicly available. Clearly that would be bad.
>
> That may be not a problem because those keys "usually" work only with the corresponding media - people would need to get their hands on a coorporate installation media to actually use it.
I'm not sure how challenging that in fact might be. A quick Google search turned up lots of sites that at least claim to have Windows volume keys and necessary install media. I know that college students can be very adept at things in that domain.
> The biggest problem you might face is the UUID of the client instances - they will be identical. If you plan to use Active Directory functionality (for e. g. Single Sign On) then you need to make sure each VM is different (speaking of running sysprep) and that you have a different user on each VM - which will be not easy to mantain.
If I'm understanding your thought correctly, the UUID issue is why I thought attempting 1 shared OS license key for all VMs would be problematic. My assumption is that having a unique OS key on each VM would solve this problem.
As far Active Directory goes, that likely won't be an issue. Our students have storage on the campus network, but we have no plans for the VM to access that. All our SAP resources are hosted remotely at a UCC. I envision the students being able to 'boot' their VM, connect to the UCC using the client software, do their SAP work, and be done. The only storage they'd have in the VM would be a drive in the VM. While this might not work in many deployments, given our use of this just for lab instruction, I think it would work well.
> Another point to consider is: How to update? If you update your main image (e. g. necessary SAPGUI patches) - how will you distribute that to the USB-VMs - or how will you make sure the students use the latest copy?
This is where our situation and a corporate situation likely differs. Since we are hosted by a UCC that caters just to the academic environment things tend to be build and frozen during the summer and then not changed until the next year. Our classes run each semester independently. Although we may have to roll out a different VM from one semester to the next, a mid-semester change shouldn't be needed. However, having said that, if we do need to install a patch, that should be much easier. In a lab shared environment updating a software version requires a lot of coordination. In this VM situation, each students has full administrator privilege over their VM. If they need to install a patch, they can do so. If they mess this up, they haven't disrupted anyone else. In that instance they could just download the base VM again as a 'reset.'
> In such an environment I'd more think about setting up a terminal server (using Windows 2003) and install all necessary software there. With that you only need to update at one place, you can granularily give permissions to the users and supporting users in case of a proble is easier (mirroring the session) than having single instances with all the same hostname of the client. And all students only need an RDP client which comes with the Windows XP or Vista by default.
That is something we haven't considered with this project, and I'll have to check with our system manager. Resources might be an issue here. We have an abundance of PCs, so each of them running their own VM isn't an issue. I'm not sure if we have a server capable of supporting 30-40 simultaneous remote connections that is not otherwise in use.
Thanks for your ideas here Markus. Any other thoughts, ideas, etc. are most welcome. I'll also update this thread as I start experimenting with this over the next couple of weeks.

SAP Cluster service issue

Here is the description of the PRD cluster scenario. ( windows 2008 + oracle)
We have 2 nodes .
1. host-erpn01 ( Have ASCS , Database instance, Enqueue and Dialog
Instance installed)
2. host-erp02 ( Have Central Instance, Dialog Instance and Enqueue installed)
When we move "SAP SID" service using "failover cluster management tool" from one node to another its fails and we have to manually select the "SAP SID cluster service" and "SAP SID cluster instance" to online.
These both service and instance were coming online after manual selection, however after some time in the mmc console of node 2 the sap instances hosted on node1 are in red cross and are giving " cannot connect to sap service dcom interface error 800706BA"
We replaced the sapstartsrv.exe from working directory of ASCS instance to CI executable directory.
Now the disp+work is stopped for CI instance. Also in the CI instance executable directory we can see five files with name of sapstartsrv i.e
sapstartsrv.exe.new , sapstartsrv.exe.tmp, sapstartsrv.new, sapstartsrv.pdb and actual sapstartsrv.exe file.
Here is the log of sapstartsrv.log CI work directory from node2.
trc file: "sapstartsrv.log", trc level: 0, release: "701"
pid 1968
Mon Oct 11 15:55:33 2010
SAP HA Trace: Build in SAP Microsoft Cluster library '701, patch 32, changelist 1046543' initialized
Initializing SAPControl Webservice
SapSSLInit failed => https support disabled
Starting WebService Named Pipe thread
Starting WebService thread
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_01
Webservice thread started, listening on port 50113
GCCIA\csrvadmin is starting SAP System at 2010/10/11 16:09:07
SAP HA Trace: FindClusterResource: SAP resource not found [sapwinha.cpp, line 334]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_NOT_CLUSTERED [sapwinha.cpp, line 907]"
or you can view other logs from the work directory dump at
http://s000.tinyupload.com/index.php?file_id=45384422007535688902
Now when we try to start the SAPSID_00 service manually its giving error "The SAPSID_00 service failed to start due to the following error: The system cannot find the path specified.
Please advice.
Regards
Edited by: Tech GCCIA on Oct 11, 2010 3:27 PM
Edited by: Tech GCCIA on Oct 11, 2010 3:28 PM

Hi Sunil ,
On node 1 there is no listener.trc at /oracle_home/network/trace folder , here is the log of listener.log file in case if it is helpful.
TNSLSNR for 64-bit Windows: Version 10.2.0.4.0 - Production on 10-OCT-2010 10:37:37
Copyright (c) 1991, 2007, Oracle. All rights reserved.
System parameter file is D:\oracle\GCP\102\network\admin\listener.ora
Log messages written to D:\oracle\GCP\102\network\log\listener.log
Trace information written to D:\oracle\GCP\102\network\trace\listener.trc
Trace level is currently 0
Started with pid=3116
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\GCP.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\GCPipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=gccia-erpn01.gccia.com.sa)(PORT=1527)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
TNSLSNR for 64-bit Windows: Version 10.2.0.4.0 - Production on 10-OCT-2010 11:59:37
Copyright (c) 1991, 2007, Oracle. All rights reserved.
System parameter file is D:\oracle\GCP\102\network\admin\listener.ora
Log messages written to D:\oracle\GCP\102\network\log\listener.log
Trace information written to D:\oracle\GCP\102\network\trace\listener.trc
Trace level is currently 0
Started with pid=5036
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\GCP.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\GCPipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=1527)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
10-OCT-2010 12:00:31 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=60592)) * establish * GCP * 0
10-OCT-2010 12:00:31 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=60593)) * establish * GCP * 0
10-OCT-2010 12:00:31 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=60594)) * establish * GCP * 0
10-OCT-2010 12:00:31 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=60595)) * establish * GCP * 0
10-OCT-2010 12:00:31 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=60596)) * establish * GCP * 0
10-OCT-2010 13:01:19 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=61336)) * establish * GCP * 0
10-OCT-2010 13:01:37 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=61340)) * establish * GCP * 0
10-OCT-2010 13:01:37 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=61341)) * establish * GCP * 0
10-OCT-2010 13:01:37 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=61342)) * establish * GCP * 0
10-OCT-2010 13:01:37 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=61343)) * establish * GCP * 0
10-OCT-2010 13:01:37 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=61344)) * establish * GCP * 0
10-OCT-2010 13:08:27 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=61485)) * establish * GCP * 0
10-OCT-2010 13:08:42 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=61489)) * establish * GCP * 0
10-OCT-2010 13:08:42 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=61490)) * establish * GCP * 0
10-OCT-2010 13:08:42 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=61491)) * establish * GCP * 0
10-OCT-2010 13:08:42 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=61492)) * establish * GCP * 0
10-OCT-2010 13:08:42 * (CONNECT_DATA=(SID=GCP)(GLOBAL_NAME=GCP.WORLD)(CID=(PROGRAM=D:\oracle\OFS\SRV\fs\fssvr\bin\FsSurrogate.exe)(HOST=GCCIA-ERPN01)(USER=csrvadmin))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=61493)) * establish * GCP * 0
TNSLSNR for 64-bit Windows: Version 10.2.0.4.0 - Production on 10-OCT-2010 13:09:57
Copyright (c) 1991, 2007, Oracle. All rights reserved.
System parameter file is D:\oracle\GCP\102\network\admin\listener.ora
Log messages written to D:\oracle\GCP\102\network\log\listener.log
Trace information written to D:\oracle\GCP\102\network\trace\listener.trc
Trace level is currently 0
Started with pid=2336
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\GCP.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\GCPipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=1527)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
TNSLSNR for 64-bit Windows: Version 10.2.0.4.0 - Production on 10-OCT-2010 13:14:34
Copyright (c) 1991, 2007, Oracle. All rights reserved.
System parameter file is D:\oracle\GCP\102\network\admin\listener.ora
Log messages written to D:\oracle\GCP\102\network\log\listener.log
Trace information written to D:\oracle\GCP\102\network\trace\listener.trc
Trace level is currently 0
Started with pid=4948
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\GCP.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\GCPipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=1527)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
TNSLSNR for 64-bit Windows: Version 10.2.0.4.0 - Production on 10-OCT-2010 13:38:12
Copyright (c) 1991, 2007, Oracle. All rights reserved.
System parameter file is D:\oracle\GCP\102\network\admin\listener.ora
Log messages written to D:\oracle\GCP\102\network\log\listener.log
Trace information written to D:\oracle\GCP\102\network\trace\listener.trc
Trace level is currently 0
Started with pid=2456
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\GCP.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\GCPipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=1527)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
TNSLSNR for 64-bit Windows: Version 10.2.0.4.0 - Production on 10-OCT-2010 14:03:35
Copyright (c) 1991, 2007, Oracle. All rights reserved.
System parameter file is D:\oracle\GCP\102\network\admin\listener.ora
Log messages written to D:\oracle\GCP\102\network\log\listener.log
Trace information written to D:\oracle\GCP\102\network\trace\listener.trc
Trace level is currently 0
Started with pid=2756
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\GCP.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\GCPipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=1527)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
TNSLSNR for 64-bit Windows: Version 10.2.0.4.0 - Production on 10-OCT-2010 14:10:42
Copyright (c) 1991, 2007, Oracle. All rights reserved.
System parameter file is D:\oracle\GCP\102\network\admin\listener.ora
Log messages written to D:\oracle\GCP\102\network\log\listener.log
Trace information written to D:\oracle\GCP\102\network\trace\listener.trc
Trace level is currently 0
Started with pid=4812
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\GCP.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\GCPipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=1527)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
TNSLSNR for 64-bit Windows: Version 10.2.0.4.0 - Production on 11-OCT-2010 09:34:05
Copyright (c) 1991, 2007, Oracle. All rights reserved.
System parameter file is D:\oracle\GCP\102\network\admin\listener.ora
Log messages written to D:\oracle\GCP\102\network\log\listener.log
Trace information written to D:\oracle\GCP\102\network\trace\listener.trc
Trace level is currently 0
Started with pid=1920
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=1527)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
TNSLSNR for 64-bit Windows: Version 10.2.0.4.0 - Production on 11-OCT-2010 21:12:29
Copyright (c) 1991, 2007, Oracle. All rights reserved.
System parameter file is D:\oracle\GCP\102\network\admin\listener.ora
Log messages written to D:\oracle\GCP\102\network\log\listener.log
Trace information written to D:\oracle\GCP\102\network\trace\listener.trc
Trace level is currently 0
Started with pid=1952
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.11.13)(PORT=1527)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE

Cannot reinstall SAP Business One 32 Bit Client program

Hi Everyone,
I started with a computer which had SAP Business One Clients (32 & 64 Bit versions) installed, along with the DTW (Data Transfer Workbench). I have since uninstalled both Business One clients, and am now wanting to reinstall the 32 Bit Client (only).
When I double click on the Setup.exe file I am presented with the message below -
I don't understand why I am presented with this message given that I have uninstalled the software.
In addition to uninstalling the software through the Windows (7) Control Panel, I have also manually deleted all files and folders related to Business One (using a Windows Search), with the exception of those files related to the DTW, and finally deleted all TEMP files.
If I click on Cancel the setup stops, but if I click on OK I see the following -
When I click on OK, above, I see the following -
What can I do now to fully remove all traces of the previous Client installations so that I can reinstall the 32 Bit Client?
Any advice will be greatly appreciated.
Kind Regards,
David

Hi Everyone,
Firstly I now have an 'S-User ID', so I have access to SAP Resources.
Secondly, thank you Sridharan for posting the information to this thread, it is a great help (particularly given that I wasn't sure how long it would take my provider to organise an S-User ID).
Thirdly; these are the actions I have taken - none have helped!
Attempted installation in the 'hidden' Windows Administrator account
http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-windows-vista/
THE FOLLOWING COME FROM THE OFFICIAL SAP 'FIX' (as shown above in Sridharan's post)
1). Tried both points, a), and b), in the InstallShield link -
http://consumerdocs.installshield.com/selfservice/viewContent.do?externalId=Q108474&sliceId=1
However I could not proceed with point 3), because by my reckoning the SAP Business One Client that I am using relies upon Installshield 17 (and there is no link available for this version!).
If I am incorrect about the above can somebody please let me know which version of Installshield was used, and I will then return to point c) of the Installshield 'Q108474' link.
2). Microsoft C++ 2005 is not installed on the computer.
3). Registry entries did not exist, and I am going to assume where removed when I performed a registry clean with Registry Mechanic (before posting this thread).
I have downloaded a trial version of Installshield Enterprise, and I am hopeful that it will contain a version 17 driver file, in which case I will return to 'Q108474'.
In the meantime however if anybody has any further suggestions can you please post?
I really don't want to reinstall Windows just because one program will not load.
Kind Regards,
David

SAP Business Connector with Java (material master data)

Hey,
I have a question about the SAP BC. What are the steps I have to do, to use the BC with a Java program?
My task is to create a program which downloads material master datas from SAP.
I just installed the BC, and hope, that I did it correctly
Many thanks in advance!!
Kind regards,
Alex
German Version:
Hey,
wie ich oben schon geschrieben habe, habe ich ein paar Fragen zum SAP BC. Ich habe ein Hochschul-Projekt und muss hierfür Materialstammdaten aus SAP herunterladen und mit einem Java Programm ausgeben lassen.
Kann mir vielleicht jemand weiterhelfen, wie die Schritte hierfür aussehen?! Wie verbinde ich den BC mit meinem SAP System? und wie bekomme ich anschließen die Daten mit einem Java Programm ausgelesen?
Ich habe bereits den BC installiert und konnte mich meines Wissens auch richtig anmelden;-)
Ich hoffe, dass mir jemand weiterhelfen kann und bedanke mich schon im Voraus für eventuelle Antworten!!!
Viele Grüße
Alex
Edited by: Rolf Gersbacher on May 19, 2010 10:34 PM

Hi,
I work with SAP BC some time ago... I remember that you configure the connection in SM59 / SICF and the server open a port to "listen" (connect external).
So, your external program can execute functions inside SAP and exchange data.
See some links:
http://en.wikipedia.org/wiki/SAP_Business_Connector
http://help.sap.com/saphelp_nw04/helpdata/en/6a/3f93404f673028e10000000a1550b0/frameset.htm
http://www.thespot4sap.com/articles/SAP_XML_Business_Integration.asp
Best regards,
Leandro Mengue

PLM550 SAP Resource- und Portfoliomanagement – RPM 5.0

Similar Messages

Maybe you are looking for