Plmd_audit

can anyone help me in activating 'import' button in the transaction plmd_audit.
regards,
Dhiraj

Hi Dhiraj,
Yes I understand that, but as said in the above post, the code is written such that it will not allow you to copy a audit plan from anywhere to anywhere.
You can only include parts of the audit plan into the new or existing audit plan.
meaning... you can import the audit plan from client 020 to client 100 under a new audit plan.But then, it will be under the new heading , not as the original one.
I tried it, not possible.
Regards,
Kaustubh.

Similar Messages

  • How to create new text type in PLMD_AUDIT

    Hi All,
    I need to create new text fields in addition to the existing Text types in Audit Management screen for all the audit components in the TEXT TAB in transaction PLMD_AUDIT.
    guide me.
    With Regards,
    San Rao

    Hi san. rao
    If you need to create that, you need to go ABAP development. In sap Audit management is not a sophasticated tool for all kind of audits. In the Audit component only you will find the extra text type Audit location. other than that you will find description and note.
    thanks &regards.,
    kamal

  • How to enhance screen for audit management (TC:PLMD_AUDIT)?

    I try to use BADI PLM_AUDIT_APPEARANCE & PLM_AUDIT_ATTRIBUTES to enhance screen for audit management(TC:PLMD_AUDIT) ,but it looks don't work

    Hi,
    It is not possible in SAP ERP 6.0, it could only be by a repair development. The appereance BADI does not add extra fields but it is used to influence the display of existing structure. It was said that new BADIs for this fuunctions will be introduced in enhancement packages. We did not implement any enhancement packages at the moment, so I am not really sure.
    Regards.

  • PLMD_AUDIT - Toggle between Display and Change - Important!!

    Hello all,
    I've a problem when I work on PLMD_AUDIT.
    Pre-requisite for replicating the issue.
    1> Change the settings in PLMD_AUDIT (a face like icon) to Display mode
    When I run PLMD_AUDIT for an Audit with Action, it displays me the "Grouping" field and the "Involved Persons" tab values correctly.
    But when I toggle from Display to Change, the value in "Grouping" and the "Involved Persons" tab vanishes.
    Can you please check in your system and let me know if you also face this issue?
    Thank you in advance,
    Vaishnavi

    Hello Keerthi,
    Thanks for your reply.
    Please follow the below mentioned steps.
    1) Change your time zone to a different time zone other than the created time zone of the action.
    say if action has been created in London time zone, change system zone to some other than London.
    2) Change the Settings in PLMD_AUDIT tcode (face like icon) to Display
    3) Open any audit WITH ACTION.
    4) When you double click on Action inside the audit, the action will be opened in Display mode.
    5) Now toggle between Display and Change.
    6) Kindly check if the values in the "Grouping field" and BUPA roles in "Involved Persons" tab are present now after toggling?
    Please let me know at the earliest.
    Your assistance is highly appreciated in this regard.
    Thanks in advance,
    Vaishnavi

  • Trans PLMD_AUDIT and Badi PLM_AUDIT_ACT_LINK

    Hi,
    We have been able to successfully create a Notification (M4 or M5 depending on user's choice) from a corrective action, in transaction PLMD_AUDIT, using Badi PLM_AUDIT_ACT_LINK, method CREATE_OBJECT.
    However we are left with two issues:
    1) In config, we have set up an Audit Object as Functional Location, which we would like to be able to default into the Notification
    2) We would also like to deafult the descrption from the Corrective Action into the Short Text of the Notification created from it.
    We have tried various different things in method Create_Object to resolve these last two issues but have so far been unsuccessful
    Has anyone done this already?
    Can anyone help please?
    Hope you can help,
    Jan

    Hello Jan,
    Could you please share how you got this resolved?
    Thanks
    dave

  • Printing Image From PLMD_AUDIT

    Hi Experts,
                     I have requirement , there is a T CODE : PLMD_AUDIT To create and change audit inspection there u can create audit or inspection,
                     under audit u can create question , u can attach image for each  that will go to sap archive   , after creating audit u can print this with
                     the help of print   preview button now if we print this audit , one form will be generated with all questions , now my requirement is to
                     display the pictures for each questions using the standard ADOBE FORM PLM_AUDIT . please any one suggest how to achieve this .
                      Right now I am downloading the pictures from sap archive to local pc but I am not able to position the image to question table .

    Hi k_aladdin
    Unfortunately you would need such as E61 amongst others to be able to do this directly with a document.
    If however you wish to print an image from gallery using PictBridge, have a look at this:
    http://www.allaboutsymbian.com/features/item/How_to_Print_photos_using_PictBridge.php
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • SHDB recording in PLMD_AUDIT

    Hello,
       I am trying to record the Audit corrective actions creation through SHDB and want to
    do the same process as batch input .
         The problem is SHDB is not recording the mouse clicks . For example if i want to create a corrective
    actions under the Audit  question list it is not able to go till the Audit Question list level and create it . Instead the cursor is always at the Audit plan level .
       Any idea how to capture the mouse clicks through SHDB transaction . Or Is there any key to move the cursor to Audit Question level  in PLMD_AUDIT ? . Or Is there any way to do this corrective actions creation through a program using BAPI's  .
    Regards,
    Kevin

    Hi Kevin,
    Try creating CARs with this bapi 'BAPI_BUS20370_CREATE'.
    Regards,
    Keerthi

  • Read attachment details of Audit Question (PLMD_AUDIT)

    Hi Experts,
    Kindly request you to assist me on the below.
    I'm trying to build a solution using ABAP for a requirement, where the logic has to find the attachment details of an audit question or action on the audit transaction (PLMD_AUDIT).
    For example, please see the attached:
    Screen shot 1.--> I'm not able to build the solution to check whether an audit question/action is having an attachment.
    Screen shot 2.--> If the attachment exists, then how to get the attachment and send an email.
    Appreciate your valuable inputs.
    Thank you
    Mahendra

    Hi Experts,
    Kindly request you to assist me on the below.
    I'm trying to build a solution using ABAP for a requirement, where the logic has to find the attachment details of an audit question or action on the audit transaction (PLMD_AUDIT).
    For example, please see the attached:
    Screen shot 1.--> I'm not able to build the solution to check whether an audit question/action is having an attachment.
    Screen shot 2.--> If the attachment exists, then how to get the attachment and send an email.
    Appreciate your valuable inputs.
    Thank you
    Mahendra

  • Create and process audit in PLMD_AUDI

    hi,
    In transaction PLMD_AUDIT i am able to create audit but not able to 'valuate' the audit and how to add corrective actions for each non conformance.
    can anybody give the procedure for PLMA_AUDIT.

    Hi,
    You have to create a question list and assign it to the audit first. The audit must be approved before you can valuate and create corrective actions. Corrective actions are created per questions (question list items).

  • Badi user exit for transaction plm_auditmonitor/plmd_audit

    Hello,
    I am looking for UE, BADI for transaction PLM_AUDITMONITOR PLMS_AUDIT.
    I found 2 badi's for authorization check, but when I tried to debug the code it didnt work.
    Can any one tell me if there is a way to enhance this to transactions ?
    Regards
    Yifat

    Hi,
    Check BADIs
    PLM_AUDIT_APPEARANCE         
    PLM_AUDIT_ATTRIBUTES
    PLM_AUDIT_AUTH_CHECK  Activities in Audit Processing
    PLM_AUDIT_BATCH_JOBS
    PLM_AUDIT_GOS
    PLM_AUDIT_HELP_LINKS
    PLM_AUDIT_IDENTIFIER
    PLM_AUDIT_SAP_TXT
    PLM_AUDIT_TEXT_ID
    BADI_PLM_AUD_AUDIT_ROLES
    BADI_PLM_AUDIT_ACTION_TYPE
    BADI_PLM_AUDIT_ALV
    BADI_PLM_AUDIT_LIST_ITEM_TYPES
    BADI_PLM_AUDIT_STRUCTURE
    BADI_PLM_AUDIT_TYPE
    PLM_AUDIT_ACT_LINK
    PLM_AUDIT_AUO_UPDATE  PLM Audit Management: Create, Change, and Delete Audit
    PLM_AUDIT_AUP_UPDATE
    PLM_AUDIT_CALCULATE
    PLM_AUDIT_COR_UPDATE
    PLM_AUDIT_LAST_GET
    PLM_AUDIT_OBJECT
    PLM_AUDIT_QUEST_COPY
    PLM_AUDIT_SIGNATURE

  • PLMD_AUDIT add custom fields to audit header or to question detail

    Dear Sirs, how is possible to add some custom fields (for data entry) to Audit header, is there some ddic strucure to extend and enhancement to activate ?
    Regards,
    Riccardo Galli

    Hi,
    check this link.
    [http://wiki.sdn.sap.com/wiki/display/Snippets/Tutorial-AddingNewGUIStatustoStandardSAPTransaction]
    i hope this might help
    Regards,
    Shraddha

  • PLMD_AUDIT interface with QM notification

    Dear Sirs, in ECC6 i have seenin some presentations the extensions for the audit able to interface with QM notifications.
    What are the tecnical objects needed for it ?
    I have not seen parameters or activations in customizing for QM notifications.
    Regards
    Riccardo Galli

    Hello Jan,
    Could you please share how you got this resolved?
    Thanks
    dave

  • PLMD_AUDIT - Produce different smartforms for Audit dependant on Audit Type

    HI,
    This is a new module for us so we are looking for help!
    We have created our own smartform, ZPLM_AUDIT, to be produced for an audit. This all works well.
    However, we would now like to produce a different form for a different Audit type.
    How do we determine which form to use? There seems to only be space in config for one form name. We have found SAP Note 432642 and followed the instructions but the note does not tell us how to use the class we create.
    If anyone has any experience in this area, we would be very grateful for your help.
    Thanks,
    Jan
    Edited by: Jan on Dec 21, 2010 11:48 AM

    Hey Jan
    I am facing the same issue. Can you help how did you identified the audit type in this method . Also let me know what code u wrote in your enahcement .
    Thanks

  • ERROR WHILE UPLOADING EXECL FILE IN SECATT

    HI
    ALL
    I HAVE DONE RECORDING BY USING SECATT AND CREATED THE TEST CONFIGURATION FOR THE PLMD_AUDIT T-CODE AND FILLED THE TEMPLATE WHICH I HAVE DOWNLOADED FROM THE SCEATT BUT WHEN I EXECUTE I AM GETTING AN ERROR
    AS
    VARIANTS THAT MATCH SELECTION CANNOT BE FOUND
    ENTERNAL PATH:C\USER\RAMA\SAPWORKDIR
    EXTERNAL FILE:VAR_ECTC_ZAUDITLIST.TXT
    CAN ANY ONE HELP ME HOW TO OVER COME THIS ERROR
    REGARDS
    RAMANUJAM

    HI
    Jayashaker
    I have given the path right but i am not able to upload the file

  • Geocode Error while creating Business Partner in Audit Management

    Hi All,
    When I try to create business partner in PLMD_AUDIT and assign it to various partner roles like Auditor, Responsible person etc. I am getting error as " Geocoder SAP0: Country specification is (Customizing) " What should be done to avoid this error?
    Found details in spro:
    For "SAP0 Geocoder" there is no function module and destination assigned, Is it the cause of error? If it is the case then what should be assigned and Let me know the standard function module.
    Regards,
    Ram.

    hi Keerthi,
    553073 is the sap note for geocode error in country specification.
    Regards,
    Ram.
    Edited by: Ramachandran Jayaraman on Jun 9, 2008 3:18 PM

Maybe you are looking for