PLOGI EVCRE & PLOGI COSTI - Integration Switches
Dear All,
Our system currently has -
PLOGI <> EVCRE (Generate event with entry T77INT (action designat.) currently unflagged and we would like to understand the impact of having this flagged. By making it flagged does this generate/activate the workflow chain.
PLOGI <> COSTI (Integration switch for cost center accounting) is currently flagged. I would like to know the impact of having this unflagged.
Will be of help if some inputs are provided.
Regards,
Nandu
Hi,
Run RHINTE00 after running BDC and check.I think there will be some problem in the recording.Try recording aagin and process it manually in SHDB.
manoj.
Similar Messages
-
Dear All,
Our system currently has -
PLOGI EVCRE (Generate event with entry T77INT (action designat.) currently unflagged and we would like to understand the impact of having this flagged. By making it flagged does this generate/activate the workflow chain.
PLOGI COSTI (Integration switch for cost center accounting) is currently flagged. I would like to know the impact of having this unflagged.
Will be of help if some inputs are provided.
Regards,
NanduPA & OM
Check Plogi Orga shd be x
plogi plogi 1
plogi Perlu table...........T77SO
PA & Recruitment.
check PPVAC related abr in T77s0
PA & Time Management.
PA & Payroll.
OM & Time Management
OM & Recruitment
OM & Payroll.
and also have a look at table V_T77s0 once -
wht is the intergartion switch in om ?
Please go to transaction SM30 or Sm31 and access table T77S0
Here you will find all the integration switches and other switches that we uses in the different submodules. -
Shipment Cost Integration to COPA
Hi ,
Can any one help me to understand the baisc functionaing of Shiptment Costs handling in SD and itz integration to CO-PA,
Any doument link is also most welcome.Any doument link is also most welcome
Before posting this question, have you searched ??
Check this documentation.
[Shipment Cost Processing |http://help.sap.com/saphelp_oil472/helpdata/en/70/23d94f419311d2ac100000e829fbfe/content.htm]
thanks
G. Lakshmipathi -
Product Costing integration testing
Hi Gurus,
Can anyone please tell me the sequence of tcodes I (FI) or the team (FI,MM and PP) need to run in order to do an integration testing in Product Costing. For example: do I run CK11N before CO01 is created, etc?
ThanksTransactions are :-
MFN1 - Revaluation with Actual Prices
KKAO - Work in Progress
KKS1 - Variance Calculation
CO88 - Settlement of Order
Hopes this will solve your querry.
Regards,
Pawan Kumar -
Integrated switch - supports STP/RSTP? (Spanning Tree Protocol)
Greetings all..
As this device includes a 3-port switch, which can be integrated with the rest of the network, does it support either Spanning Tree Protocol (802.1d) or Rapid Spanning Tree Protocol (802.1w)?
Neither protocol is terribly difficult to implement, and since these things are so heavily marketed in the education space, it seems like it's a feature that should be there.
That said, when I look at the switch port that the AEBS is connected to (in bridge mode, obviously), there is no interaction with STP or RSTP. Is there some sort of "friendly" name for the option in the AirPort Utility that's eluding me?
While I'm not going to create loops in the network by cabling this up, I can't count on someone else coming behind me doing the wrong thing...I have had sniffers on LAN ports off various AirPort AP before, never a sign of a BPDU. I am fairly certain that it does not support Spanning Tree.
-
Ok, so I'm planning to buy an iPhone 5 soon and I have a question about my bill, well the data part. I get 2gb of data for myself separate from the other lines under my name, will an upgrade force me to change my plan in any way? If not, will it force me to change any other aspect of my plan in any way? The phone I'm upgrading from is a Droid 3 in case you were wondering. I heard there are implications that arise from switching from a 4s but I do not have a 4s.
Jay_Sis,
Weth is correct. You will not need to change any aspect of your plan, besides the contract extension since you already have a 2GB plan. Congrats on the new phone! You're going to love it! Check out http://bit.ly/yN1P80 if you need any help with it.
Thank you!
Katie H
VZW Support
Follow us on Twitter @VZWSupport -
Position showing in PA30 not PPOME
Hi,
I am using ECC6 and we have a problem where some times when an action is run we can see the employee is linked to their position via their PA record , however in PPOME the employee is not showing as occupying the position. If I run RHINTE00 report this corrects it, however this should not be happening in the first place.
I've checked T77S0 and PLOGI ORGA is switched on.
Has anyone else encountered this issue and found what is causing it and how to correct it?
Thanks
TomHi Tom,
This usually happens when you upload the data either through BDC or LSMW and we have to run the RHINT report for the data to be seen in PA / OM.
However, in the normal process if the PLOGI ORGA integration switch is on in table T77S0, then hiring an employee in PA reflects him in the OM struture.
Hope this helps.
Thanks
Ranjeeta -
Hi ,
Pls tell me uploading the structure is the best way or creating is the best way.
Which procedure is the best way and sucessfull.
Thanks in advance....
Reward points assured..
Regards
SriHi
My suggestion is to create org structure directly, not uploading. Usually when we do the uploading most of the objects(eg: jobs, positions) will be missing and when we try to create relationships, it will not work properly.
Best option is to directly create the org structure in the system. The PLOGI ORGA integration switch should be on before you start creating the org structure, which will help in integration with PA module.
Regards
Santhosh.S -
OM PA Integration (PLOGI SPLIT) is not working for all employees
Hello Experts,
In our 4.7 system, PLOGI SPLIT (Integration: New IT 0001 record at name change) is enabled. But there are certain infotype 0001 records which are not updated when descriptions to positions/org units are changed in OM.
PLOGI ORGA is also activated.
RHINTE30 runs as a batch job regularly.
The PA data should have been updated.
We have checked RHINTE30 program and it checks table HRINTE30. When does table HRINTE30 be filled with the employees to be updated? Do you think that the root of this problem is that table HRINTE30 is not updated?
Points will be awarded.
Many thanks
Regards,
Olekan Babatondedid you check the following switch in T77S0:
PLOGI SPLIT Integration: New IT 0001 record at name change
The description (F1) states:
Integration: New Infotype 0001 Record When Description Is Changed
If the value entered is 'X' and you change the description of positions,
jobs or organizational units, new infotype 0001 records for the
personnel numbers concerned are created on the date of the change(s).
This means that the system will always display the up-to-date
descriptions of named objects, both in Personnel Administration
transactions and in reports on persons.
If the description of an object is changed on a particular date (as of
Release 4.5, this is done in Organizational Management by copying a
record from infotype 1000, "object"), the system first establishes which
personnel numbers are affected by this, and marks them internally. Then,
you should use report RHINTE30 (parameter "Open Personnel Numbers Only")
to create a batch input session. After this session has been processed,
new infotype 0001 records for the person(s) concerned are created.
If the field PLOGI SPLIT is blank, the system only creates new infotype
0001 records if the assignment itself (that is, the number of the
position, job or organizational unit) changes.
Seems to be just what you are looking for. However the downside is that this will increase the data in IT0001. -
hi gurus,
I am having a question, when are doing an integration between om and pa we are making PLOGI ORGA swith on with X mark right.coreect me if i am wrong
If there are any inconsistency there then we are runing reports right correct me if i am wrong
my question is , what is PLOGI PLOGI do in the integration of OM and PA how we must activate that(what is this purpose). is that the same with X we have to activate or anything else. please help. i am confusing with this integrationsam having a question, when are doing an integration between om and pa we are making PLOGI ORGA swith on with X mark right.coreect me if i am wrong
If there are any inconsistency there then we are runing reports right correct me if i am wrong
my question is , what is PLOGI PLOGI do in the integration of OM and PA how we must activate that(what is this purpose). is that the same with X we have to activate or anything else. please help. i am confusing with this integrations
hi goutam,
PLOGI ORGA is an integration switch which you will activate when you want to have an integration between OM and PA. you have to enter X in the PLOGI ORGA field in table T77S0.
RHINTE20 report is to be run for inconsistencies.
RHINTE10 report is to be run to transfer data from OM to PA.
because of this integration, there will be transfer of data from OM tables to PA tables T528T, T513S, and T527X for org unit, position, job.
In the field of PLOGI PLOGI in table T77SO, you have to enter the current plan version, because all your Org Structure will be present in the current plan version.
hope this makes you have a clear picture of OM and PA integration.
please reward points if it is helpful.
regards,
salman -
HI gurus,
when we are doing integration between OM and PA. from the experts of this forum i came to know that we have to activate plogi orga with X . then what is this reports used for? RHINTE00,RHINTE10,RHINTE20,RHINTE30 .(already we are doing integration with PLOGI ORGA right)
what is the use of this reports then?
--goutamyou check the following switch in T77S0:
PLOGI SPLIT Integration: New IT 0001 record at name change
The description (F1) states:
Integration: New Infotype 0001 Record When Description Is Changed
If the value entered is 'X' and you change the description of positions,
jobs or organizational units, new infotype 0001 records for the
personnel numbers concerned are created on the date of the change(s).
This means that the system will always display the up-to-date
descriptions of named objects, both in Personnel Administration
transactions and in reports on persons.
If the description of an object is changed on a particular date (as of
Release 4.5, this is done in Organizational Management by copying a
record from infotype 1000, "object"), the system first establishes which
personnel numbers are affected by this, and marks them internally. Then,
you should use report RHINTE30 (parameter "Open Personnel Numbers Only")
to create a batch input session. After this session has been processed,
new infotype 0001 records for the person(s) concerned are created.
If the field PLOGI SPLIT is blank, the system only creates new infotype
0001 records if the assignment itself (that is, the number of the
position, job or organizational unit) changes.
Seems to be just what you are looking for. However the downside is that this will increase the data in IT0001. -
Hi Gurus,
I have activated the integration switch for qualification - Plogi Quali. Now using pa30 transaction i make any changes in IT0024 and save it. when i want to come out of the view for IT0024, the system prompts me a message " Do you want to save the profile first". I have already saved the changes then why system is asking me to save the profile.
Please share the reason for this behaviour
RegardsHi,
Since you have maintained the integration between PA and PD the screen which you get while maintaining qualification infotype is actually a employee profile screen which can be accessed through T-Code PPPM.
So you are actually creating a profile for that employee in which you can maintain many other details such as his potentials, preferences etc. thats why the system is asking you to save the profile.
Kiran. -
802.1q trunk b/w 8PoE switch integrated in 1861 CME
Hi,
I have to deploy cme7.0 (1861). Actually two 1861 routers are bought but only one of them act as cme while the 8PoE integrated switch of other 1861 is used. half of the IP phones are connected to the 8PoE integrated switch in CME (1861 router) while half of the phones are connected to 8PoE of 1861 (only 1861's PoE is used in this setup). i want to know whether i can cascade the two switches or in other words whether i can form a 802.1q trunk b/w these switches to carry the voice and data vlans.
Regards
Naresh RathoreYes, you can.
-
Hi All
At my client (with several sites) the cost centre field is an output field on IT0001 because the integration switch between PA and ORG is switched on. This is good for the bulk of the sites, but the client now wants the cost centre field to be an input field if the employee resides in the UK. How do I do it ? In the PAI of the flowlogic in the modulepool ? Using dynamic actions and branching out to an little routine ? or what ?? I've tried the settings of the field in the element list of the modulepool (flagging the field as an input field) and I've also tried the setting of the field in T588M (screen control), but no cigar....... The PLOGI switch keeps the field as an output field. I cannot fiddle with the PLOGI swich as this requirement only goes for UK (ie the rest of the Globe needs the switch to be on). Advice will be much appreciated.Hi,
You can do it through the Enhancement -PBAS0001
Exit -EXIT_SAPFP50M_001
write the logic here for making the field kostl as input field depending on the location.
Reward points if useful
Regards,
Manoj.
Maybe you are looking for
-
After installing the safari update for windows, outlook is now not opening email hyperlinks. I have set safari to be my default browser but outlook won't open it when I click a link. I get the following message: "This operation has been canceled du
-
Hi there I've been trying to give my imported videos a new spin by using the screen on a retro TV image to play the video on. I've masked the screen in Photoshop, saved it as a transparent .png and placed it onto the page. I then place the video, siz
-
WIFI Quit after upgrade to firmware 3.1.
My WIFI quit after upgrading from 2.1.1 to 3.1. It worked twice since the upgrade for a period of an hour or so. I have tried to reset the network, All settings, serveral reinstallation of the firmware. I also Tried to manually enter in my WIFI infor
-
How to make Photoshop Interface Black or change color?
Hey guys, i have been watching videos and looking at images lately and i have noticed how some peoples photoshop interfaces are black and ive tried to find out and i just cant seem to figure it out, if you could please help me and figure it out that
-
MacBook Pro stuck at grey screen after Yosemite upgrade
upgraded to yosemite yesterday. Reboot and stuck at grey screen(login in page) when i log in there is some codes thing at the left top corner of the screen. and then it reboots again. Which means I can never log onto the computer. what should I do