Plot with excel

Hi, I currently have this graph.
It is currently graphing "scatter with data points connected by lines without markers."
I just want to graph "scatter. compares paires of values"
how do i change that in the property node of labview?
can someone please help me?
Best regards,
Krispiekream
Attachments:
untitled.PNG ‏76 KB

I already found the solution for that.
thanks. but i do have this other problem
currently, when I graph this.
it look like this. image 1
but i want to do this automatically. is it possible to do so? like this. image 2
if so, does anyone have any suggestions?
Best regards,
Krispiekream
Attachments:
untitled.PNG ‏37 KB
untitled1.PNG ‏38 KB

Similar Messages

PDF's from AutoCAD with Excel tables

I have been trying to plot an excel spreadsheet within LT2009. I am using "Adobe PDF" driver, and end up with extra lines running vertically through the excel table (see column 9 in image below).
I am convinced that it is an Adobe driver issue as it doesn't happen with Autocad's dwg to pdf driver. And I would use the ACAD driver but it won't plot a true A3 size (large marging and cuts off my border)..
Using Autocad LT2009, Acrobat 9 Pro and MS Office 2010.
Would appreciate any insight.
Thanks
Holly

Good day,
Do you have Adobe Acrobat X Professional installed? PDFMaker, the Adobe PDF icon you were referring to, will install into AutoCad 2008 and later with Acrobat X Converting via PDFMaker should preserve your layers.
Kind regards,
David
Acrobat Community Manager
Adobe Systems

Save 3d plot to excel as an image

I am in the report phase of the project and would like to be able to save a 3D plot image (not the data) to an Excel spreadsheet. Any ideas? (The Print.Vi Invoke Node function methods for the front pane are not available in the RTE.)
Solved!
Go to Solution.

If you are using the CW 3D graph then see this thrad on how to insert the graph as an activeX object into PP which should also work with Excel.
If not the CW 3D graph then ... I have not suggestions.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Excel Workbook with Excel Data Model stored on SharePoint - daily refresh

I'm not sure if this is exactly the right forum but I'm hoping that someone here can either answer or point me in the right direction.
I have an Excel Workbook with an Excel Data Model.
The Excel Data Model uses SQL to contact our data warehouse and pull through data into tables.
We are storing the Workbook on a SharePoint site and viewing it using Excel Services.
The data in our data warehouse is updated daily and so I would like to refresh the workbook daily and remove the option to refresh the data in the browser.
Is this possible with a workbook that has an Excel Data Model (I've seen lots of posts that relate to workbooks with connections to tabular models).
Thanks
Paul

Hi Paul,
I have answered this issue in this thread that you posted in SQL Server PowerPivot for SharePoint forum, please see:
http://social.msdn.microsoft.com/Forums/en-US/9627939c-e9f1-48ae-a6ed-0c238d8f2d69/excel-workbook-with-excel-data-model-stored-on-sharepoint-daily-refresh?forum=sqlkjpowerpointforsharepoint
Furthermore, this issue is more related to PowerPivot for SharePoint. If you have any more questions about PowerPivot for SharePoint, I would sugget you open a new thread in the forum below for better support:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=sqlkjpowerpointforsharepoint
Thanks for your understanding.
Regards,
Elvis Long
TechNet Community Support

Excel empty with 'excel inplace' option

Hi everyone,
in order to show my alv data in an excel format, with 'excel inplace' option, this sheet appears empty. However, if i choose to download the data into a excel file, it appears right.
Do you know the reason of this?
Thanks

Implement OSS Note 782922 - Excel Inplace: Header Sheet contains garbage characters.
This will require installation of SAP GUI Patch Level 8.
Also , You can try be installing SAP GUI with all options checked.

Report Generation Toolkit with Excel 2003 and Excel 2000

Hello,
I'm using the Report Generation Toolkit to generate an Excel report from an Excel template.
The "NI_Excel.lvclass" is included in the "source" section of the application builder options.
I create an exe file on a PC where Excel 2003 is installed. On a Notebook, where only Excel 2000 is installed, the application crashes at the generation of the report:
I guess the problem is the different version of Excel but I don't know. On the developer PC with Excel 2003 it works fine.
In this document it's only talked about different Word versions.
How can I use the Report Generation Toolkit here?
I'm using it that way:
Regards

Oh, it seems that the Report Generation Toolkit "only" supports Excel XP/2003/2007.
I think, that's the problem.

Problem with Excel output format

Hi Guys,
I am creating a report in XML Publisher (not standalone). I am facing some problems could anyone please help me to figure out the issues.
Is it possible to have all three output format (PDF, HTML & EXCEL) exact (same aligned) only by creating a single RTF Template? I am facing the problem with Excel output format the output format of excel is taking excels cell formatting.
Example Numeric fields --> Right Aligned, text fields --> Left Aligned
One more issue with excel is -ve(negative) values are getting displayed in red and in brackets like ($13) (with red color).
Our client want excel output on priority.
Is there any limitation for excel output format of reports?
It is very urgent for us please help.
Any help would be highly appreciated.
Thanks,
Pragati
Edited by: user11237443 on Aug 27, 2009 1:22 AM

Hi Mahi,
Thanks for your response. But i could not understand how can we write wrapper program could you please give some light on this or provide some link it would be helpful for me:-)
I have read that blog for excel limitations but i have more question?
1) What about the negative values?
if any field is displaying negative amount then excel not displaying right value for that:(
2)How can we align header or data?
Do XMLP with EBS provide any solution for formatting in excel?
3) If for the alignment of numeric value we concatenate them with any special character then how can we perform calculation that field?
Here are so many formatting issues do we need to write any code in xml for that?
Please help.
Many Thanks,
Pragati

Known issues for OBIEE Office Add in with Excel 2007?

Hi,
Does anybody know if there are issues for the office add-in with Office 2007?
i'm playing around a little bit to see how it works, but it seems that Excel interferes with the layout.
I do get different grafs and also i tried the tutorial with the excel template and my changes come only partly through.
Thanks
Sandra

Hi Sandra,
Were you able to use OBIEE Office Add in with Excel 2007? I am planning to look at this compatibility. I am looking here to seeif anyone found issues with this setup..
Thanks,
Bharat

Problem with images in XML with excel output

Hello:
I made an XML concurrent program, with excel output, but i am having a problem:
The rtf template has a logo (bmp image), but it is not showing in the excel (if i execute the concurrent in the oracle applications). However, if i create the xml in Oracle Reports in my computer, and then load that xml in the rdf template in word, i can see the logo in the excel preview. I don't know why is it not showing when i execute the program in applications.
If someone can help me with this, i will be very grateful.
Greetings
Message was edited by:
user632438

xml cP, will not give you a image in excel output,..
In RDF there is a placeholder for image, and the image is located in certain location, at runtime it picks and render the output with logo.
but xml CP, will get the data in xml type and merge with rtf to get the output you wanted..
if you have the rtf with logo embedded in it, if output is of pdf or rtf output , then it will display the logo ,.
in excel currently it is not possible to show the logo,..
excel you see could be xml-excel or csv-excel not the true binary excel.
to get the logo embedded ,for that you have to wait on tim for the excel template, which will be release in near future i guess..

Run BI Publisher report (with Excel template) on Windows 7

Hi, All.
Sorry for my English :)
I have some problem:
I use BIP standalone for my reports. Some reports are in Excel (with Excel template). When I run it on PC with WinXP - all is OK. But, when I try to run it on PC with Win7, then Excel is opening and writing this "Native file format and file extension does not mismatch. Before open be sure of file does not damage" (this is my translation). If I try save file on the hard disk, then file is 0 kb. But if a report has RTF-template, then it opening normaly on Win7's PC.
Have you any ideas?
Thanks!

option1:
The query should be same @ detail level, only the template has to be different for summary and details.
@runtime, user can choose to see the detail/summary
Disadvantage, if the data is huge,
advantage , only one report.
option2:
create two separate reports summary and details
and create diff data and diff layout and keep it as different report
Advantage, query will perform based on the user run report, summary/detail, so that you can write efficient query.
Dis advantage , two reports query/template to be maintained.

How to plot with multi colors in a single XY graph?

Hi,
  I'm making hesteresis measurements. In this case, I collect data while sweeping voltage first from 0 to 2V, and then back from 2V to 0V, and the data are plotted in a single XY graph. In the XY graph, I want forward sweep plot of one color while the reverse sweep with another color so I can easily make comparisons. And I want to see the data real time. I tried to wire "plot color" in "property node", but this will change the color globally and can not be applied to a section of data. Can anyone advise me how to do this? Thanks!
Guanglei
Solved!
Go to Solution.

Hi Graham,
  Thank you very much for the reply, I really appreciate it.
  However I don't quite understand your descripton. Yes I do spit my data in two arrays, one for forward sweep, and the other for reverse sweep. I can plot with different colors in XY graph by appending several XY graphs into one, but by doing this I can not see the data real time. I quickly made a vi to demonstrate my problem, hope this will give you a better understanding. Thanks.
Guanglei
Attachments:
demo_GL.vi ‏108 KB

Error in communicating with Excel Calculation Services

When attempting to use Excel Web Access web part, I get "We're sorry. We ran into a problem completing your request. Please try that again in a few minutes."
Checked event log and found
There was an error in communicating with Excel Calculation Services
http://my server:32843/49082a5d56c141629497dd8b28375f47/ExcelService*.asmx exception: The remote server returned an error: (503) Server Unavailable.
[Session:
User: ].
I googled the error and, as suggested by various sources, rebooted the server. (Same issue occurs) I also tried disabling asp.net impersonation with no change. Ideas?

Hi ,
Reason for the error :
The Excel Services Application server computer is in a non-valid state and may need to be restarted.
Resolution : (Before taking the step toward to restart the server, try the below option)
Restart your excel service application app pool/ restart the excel service. (Reference :http://technet.microsoft.com/en-us/library/ee513104(v=office.14).aspx)
If you have more than one application server in the farm , then try start the excel serviceto a different server.
Regards,
Senthil

Error message when opening a shared workbook with Excel 2007

Hello,
We would like to share a workbook outside BW (by saving into a serveur).Since we use Excel 2007, we can't anymore open this workbook.
We have a message error (see bellow).
For your information, it was ok with Excel 2003.
When whe save the workbook in local disk and then copy from local disk
to a serveur, it's ok.
We use SAPGUI 7.10 support package 8, patch 1 Revision 1443 & BI 7.0.
Best regards
Nicolas Triqnuand

hey Nicolas,
first of all, your error message is in French... not too many people out there will be able to understand. Eventhough I do understand French, it doesn't make much sense to me... BUT... in Excel2007 all macro's are by default disabled. When you enable them (you should get a "Security Warning" right under "the Ribbon"), your BI stuff should work again.
Just gave it a try, and it runs smoothly over here.
Cheers,
RafB

Error Message: "Excel cannot complete this task with available resources" when creating pivot table with Excel 2013

Hi,
One of our users encountered this problem with Excel 2013 while creating pivot tables, particularly with large files. We tried to modify Virtual Memory
of the pc but error still persist. Why does this happen and how can we resolve this? Thanks.
Another error message encountered by the user, this time when opening large files. The files she tried to open are working fine in 2010. But when opened in 2013, it prompted : "There
isn't enough memory to complete this action. Try using less data or closing other applications."

Hi,
In regarding of the issue, please provide us more information to assist you better.
Did your user using the Excel 2013 and Excel 2010 with same PC? If not, please let me know the both of the 2 PCs' hardware list/Windows operation system info.
Did you using Excel 2013 32bit version and Excel 2010 64bit version?
General speaking, this issue usually occurs with Office 2013 32 bit version. It has a limitation of 2Gb of memory that can be used by its process. And the 64-bit Excel can handle larger workbooks.
Thus, if your user using 32bit Excel, I recommend try 64bit Excel instead.
Here is a similar issue, we also could try it:
http://answers.microsoft.com/en-us/office/forum/office_2007-excel/excel-cannot-complete-the-task-with-available/d31b1822-ebde-4c9b-8d11-e54bb652847d
If you have any update, please feel free let us know.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Issue in sending e mails with Excel attachment

Hi,
I am facing an issue with one function module - SO_DOCUMENT_SEND_API1. We were using this for sending mails to diff destination with excel sheet attachment contains sales data. This system has been migrated from 4.5B to ECC 5. Now this process is not working like the old one and the excel attachment is not properly formatted. All the data is being written into one cell of excel sheet and it seems only one line is present in output and is corrupted.
Can you please let me know what might be the issue here, any alternate option available or something to be modified in new version with this function module?
Thanks in advance,
Ullas

Hi Ullas,
check this once.
REPORT ZLAXMI_ALVMAIL4                         .
TABLES: EKKO.
PARAMETERS: P_EMAIL   TYPE SOMLRECI1-RECEIVER
                                  DEFAULT '[email protected]'.
TYPES: BEGIN OF T_EKPO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
END OF T_EKPO.
DATA: IT_EKPO TYPE STANDARD TABLE OF T_EKPO INITIAL SIZE 0,
      WA_EKPO TYPE T_EKPO.
TYPES: BEGIN OF T_CHAREKPO,
EBELN(10) TYPE C,
EBELP(5) TYPE C,
AEDAT(8) TYPE C,
MATNR(18) TYPE C,
END OF T_CHAREKPO.
DATA: WA_CHAREKPO TYPE T_CHAREKPO.
DATA:   IT_MESSAGE TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   IT_ATTACH TYPE STANDARD TABLE OF SOLISTI1 INITIAL SIZE 0
                WITH HEADER LINE.
DATA:   T_PACKING_LIST LIKE SOPCKLSTI1 OCCURS 0 WITH HEADER LINE,
        T_CONTENTS LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        T_RECEIVERS LIKE SOMLRECI1 OCCURS 0 WITH HEADER LINE,
        T_ATTACHMENT LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        T_OBJECT_HEADER LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE,
        W_CNT TYPE I,
        W_SENT_ALL(1) TYPE C,
        W_DOC_DATA LIKE SODOCCHGI1,
        GD_ERROR    TYPE SY-SUBRC,
        GD_RECIEVER TYPE SY-SUBRC.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM DATA_RETRIEVAL.
Populate table with detaisl to be entered into .xls file
PERFORM BUILD_XLS_DATA_TABLE.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
                               TABLES IT_MESSAGE
                                      IT_ATTACH
                                USING P_EMAIL
                                      'Example .xls documnet attachment'
                                      'XLS'
                                      'filename'
                             CHANGING GD_ERROR
                                      GD_RECIEVER.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM DATA_RETRIEVAL.
SELECT EBELN EBELP AEDAT MATNR
   UP TO 10 ROWS
    FROM EKPO
    INTO TABLE IT_EKPO.
ENDFORM.                    " DATA_RETRIEVAL
*&      Form BUILD_XLS_DATA_TABLE
      Build data table for .xls document
FORM BUILD_XLS_DATA_TABLE.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
            con_tab TYPE x VALUE '09'.   "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
CONSTANTS:
    CON_TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
    CON_CRET TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
         INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_EKPO INTO WA_CHAREKPO.
    CONCATENATE WA_CHAREKPO-EBELN WA_CHAREKPO-EBELP
                WA_CHAREKPO-AEDAT WA_CHAREKPO-MATNR
           INTO IT_ATTACH SEPARATED BY CON_TAB.
    CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
    APPEND IT_ATTACH.
ENDLOOP.
ENDFORM.                    " BUILD_XLS_DATA_TABLE
*&      Form SEND_FILE_AS_EMAIL_ATTACHMENT
      Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
                                          PIT_ATTACH
                                    USING P_EMAIL
                                          P_MTITLE
                                          P_FORMAT
                                          P_FILENAME
                                          P_ATTDESCRIPTION
                                          P_SENDER_ADDRESS
                                          P_SENDER_ADDRES_TYPE
                                 CHANGING P_ERROR
                                          P_RECIEVER.
DATA: LD_ERROR    TYPE SY-SUBRC,
        LD_RECIEVER TYPE SY-SUBRC,
        LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
        LD_EMAIL LIKE SOMLRECI1-RECEIVER,
        LD_FORMAT TYPE SO_OBJ_TP ,
        LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
        LD_ATTFILENAME TYPE SO_OBJ_DES ,
        LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
        LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
        LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL   = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT              = P_FORMAT.
LD_ATTDESCRIPTION      = P_ATTDESCRIPTION.
LD_ATTFILENAME         = P_FILENAME.
LD_SENDER_ADDRESS      = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
     ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME   = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM   = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE   = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME   = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE   = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            DOCUMENT_DATA              = W_DOC_DATA
            PUT_IN_OUTBOX              = 'X'
            SENDER_ADDRESS             = LD_SENDER_ADDRESS
            SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
            COMMIT_WORK                = 'X'
       IMPORTING
            SENT_TO_ALL                = W_SENT_ALL
       TABLES
            PACKING_LIST               = T_PACKING_LIST
            CONTENTS_BIN               = T_ATTACHMENT
            CONTENTS_TXT               = IT_MESSAGE
            RECEIVERS                  = T_RECEIVERS
       EXCEPTIONS
            TOO_MANY_RECEIVERS         = 1
            DOCUMENT_NOT_SENT          = 2
            DOCUMENT_TYPE_NOT_EXIST    = 3
            OPERATION_NO_AUTHORIZATION = 4
            PARAMETER_ERROR            = 5
            X_ERROR                    = 6
            ENQUEUE_ERROR              = 7
            OTHERS                     = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
    LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM.
*&      Form INITIATE_MAIL_EXECUTE_PROGRAM
      Instructs mail send program for SAPCONNECT to send email.
FORM INITIATE_MAIL_EXECUTE_PROGRAM.
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
                WITH OUTPUT = 'X'
                AND RETURN.
ENDFORM.                    " INITIATE_MAIL_EXECUTE_PROGRAM
*&      Form POPULATE_EMAIL_MESSAGE_BODY
       Populate message body text
FORM POPULATE_EMAIL_MESSAGE_BODY.
REFRESH IT_MESSAGE.
IT_MESSAGE = 'Please find attached a list test ekpo records'.
APPEND IT_MESSAGE.
ENDFORM.                    " POPULATE_EMAIL_MESSAGE_BODY
Regards,
Laxmi.

Plot with excel

Similar Messages

Maybe you are looking for