Plotting a Chart with two Y- Axis

Hi Team,
I need to draw an combined Coulmn line chart with 2 Y-Axsis. I have defined all the category Axsis ,Value Axsis 1&2 and also the Region color.I am able to get the chart ,But the problem is that the bars are getting repeated as in screen shot -please help

Hi Poornima,
Use .

Similar Messages

Waveform chart with 2 Y axis

Hi, I have labview 8.5 and I would like to know if is possible to have one waveform chart with two Y axis, I have two signal from a force load cell and two signal from a LVDT, so I would like to graph in real time what is happening in the process having in one axis the forces and in the other axis distance, how can I do it?
The problem is the forces are lower than the distance, so if I graph all in one is going to be a big mess or can I just play with each scale of each plot and put everything in one Y axis?

Wolfson wrote:
Hi, I have labview 8.5 and I would like to know if is possible to have one waveform chart with two Y axis, I have two signal from a force load cell and two signal from a LVDT, so I would like to graph in real time what is happening in the process having in one axis the forces and in the other axis distance, how can I do it?
The problem is the forces are lower than the distance, so if I graph all in one is going to be a big mess or can I just play with each scale of each plot and put everything in one Y axis?
1) Right click on the Y-axis and choose "duplicate scale". This will give you another Y-Axis.
2) Optionally right-click the new Y-axis and select "Swap sides" to move the new Y-axis to the other side of the graph.
3) If not already visable right-click chart and choose Visalbe >>> Plot legend
4) Right click on a plot and choose the Y-axis it should be associated with.
I hope that helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Apex Chart with multiple y-axis

Hi,
I am using the build-in flash Apex chart which I understand to be a subset of the Anychart.
I have the following problem, I have two series, which I am displaying in a 3D Bar Chart on a horizontal view with two Y-Axis. This works well, the problem is that each Y -Axis has a different scale. I am not setting the min or max value range for either of the y-axis as I do not know what this value range may be at the time of rendering the chart to the application user.
So as it turns out, the left y-axis has a value range from zero to 100 and the right y-axis has a value range from zero to 50 and the application users are finding this difficult and confusing as they are only looking at the bars represented in the chart and assuming that as the two bars, i.e. one form each series look similar in size, they have the same value and this can not be further from the true, as one y-axis is showing a value range twice as big as the other y-axis.
So my question is how do you customise the chart so that the value range on both y-axis is the same. i.e., the largest of the two?
Application Express 4.0.2.00.07
Thank you

You can't get axis scale variables to work in the APEX declaritive GUI because it's not designed for that. You will have to switch to custom XML.
Set everything you want -- that you can set -- because once you switch to XML, if you switch back I think you lose all those custom settings. Then when you set Custom to "Yes", drag the window widget to enlarge the window so you can edit more easily.
Find the y_xis section of the XML.
 <axes>
 <y_axis >
 <scale mode="Normal" />
 <title>
 <text>Directory Size (Gigabytes)</text>
 
 </title>
 <labels enabled="true" position="Outside">
 
 <format><![CDATA[{%Value}{numDecimals:1,decimalSeparator:.,thousandsSeparator:\,}]]></format>
 </labels>
 <major_grid enabled="True" interlaced="false">
 <line color="Black" />
 </major_grid>
<minor_grid enabled="True">
 </minor_grid>
 </y_axis>You want to change the scale line between <y_axis> </y_axis> to
<scale mode="Normal" maximum="100" minimum="0" />Or maybe it's just <scale maximum="100" minimum="0" />Except instead of constants, you want variables. I'm not sure you can use bind variable (:P7_YMAX, :P7_YMIN) you may have to use (#YMAX#, #YMIN#) variables.
I would make a new page and experiment with some VERY simple data -- maybe constants in a SELECT -- SELECT ..., 1, 2, 3 from dual ...... until you get what works.
And, again. This assumes you decide on some computation to compute the values of (:P7_YMAX, :P7_YMIN) or (#YMAX#, #YMIN#) you want it to use.
Howard

Numbers Charts: Stacked bar chart with two sets of data

Hi....newbie with first post
I'm trying to create a stacked bar chart with two lots of comparative data.
So, there is Basic + Overtime for April 2010 as one stack (ie the basic is one colour, stacked on top is the overtime in a different colour)
Basic + Overtime for April 2011 next to it.
I can get April figures next to one another as four separate columns (2 x basic, 2 x overtime), or I can get all four figures in a single stack, but I can't to two columns (one for each year) of basic and overtime.
Any ideas?

UK,
What you are trying to do will require that you interleave the two sets of two-series data into one longer two-set series, and then plot just the one pair of series. Clear as mud?
What I'm saying is that you have to fake out the program into thinking that you have just two sets, not four.
You will have one series that has, for instance Apr 2010 Basic, Apr 2011 Basic, May, 2010 Basic, May 2011 Basic, etc.. This other series in that chart will have Apr 2010 Overtime, Apr 2011 Overtime, May 2010 Overtime, May 2011 Overtime, etc.
The bad thing here (I'll anticipate your first complaint) is that 2010 and 2011 data will have the same color for Basic and another color will be assigned for both 2010 Overtime and 2011 Overtime.
To get separate color sets for 2010 and 2011 data pairs, you will have to create two charts and overlay them. Both charts would be built in the alternating year format described above, but in one chart all the 2010 data would be blank and in the other chart all the 2011 data would be blank, leaving spaces in the chart for the data from the other chart to nest in.
Jerry

Pie chart with two measures and date dimension navigation not working

Hi Experts,
Pie chart with two measures and date dimension navigation not working. Any help is appreciated.
Thanks
V

Hi Deepak,
I had time dimension in the RPD.
I have stacked bar chart with same time dim like year & month in the report. when I go to legand and set navigation it is working fine. But not with pie chart.
I am not not sure what is the problem. When I click on Pie chart it is not navigating to the target report. Can it be any other issues..???

Scatter chart with two series?

I have a table showing my cat's weight each day. (He's on a much needed diet and it's important to make sure he's losing weight, but not more that about 1% per week, as I experiment with his diet.) I created a scatter chart with the date on the X axis and his weight on the Y axis, and I made a 7 day moving average trendline to show his progress with most of the random daily fluctuations evened out. So far so good.
I added a column to the chart with a function showing what his weight would be each day if it decreased 1% per week from the average of the previous week. I would like to add this column of data as a second series on the scatter chart so I can make sure he's not losing weight too fast. But I can find no way to do this.
I had no trouble showing both series on a line chart. But no luck with the scatter chart. I tried creating a new scatter chart using all three columns of data, and I tried dragging the third column of data to the original scatter chart.
Is it really possible that Numbers '09 cannot show two data series on a scatter chart? Or is there a way to do it?
Thanks for any assistance.
Bill

Hi Bill,
Maybe this will help. A Scatter Chart displays data pairs, such as a date and a weight. A single column of data would be only one half of the data-pair set. Select both the X and Y value columns for the second set and then add to the Scatter chart.
Jerry

LineChart with two X-axis

Hello!
How can I implement the LineChart component to have two X-axis like in the screenshot attached?
Note: The Y axis is the same for both line charts, not inverted or anything.
Thank you!

here is a code where it shows 2 y axis just alter this to x axis and do the needful
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script><![CDATA[
 import mx.collections.ArrayCollection;
 [Bindable]
 public var SMITH:ArrayCollection = new ArrayCollection([
 {date:"22-Aug-05", close:41.87},
 {date:"23-Aug-05", close:45.74},
 {date:"24-Aug-05", close:42.77},
 {date:"25-Aug-05", close:48.06},
 [Bindable]
 public var DECKER:ArrayCollection = new ArrayCollection([
 {date:"22-Aug-05", close:157.59},
 {date:"23-Aug-05", close:160.3},
 {date:"24-Aug-05", close:150.71},
 {date:"25-Aug-05", close:156.88},
]]></mx:Script>
<mx:Panel title="Column Chart With Multiple Axes">
 <mx:ColumnChart id="myChart" showDataTips="true">
 <mx:horizontalAxis>
 <mx:CategoryAxis id="h1" categoryField="date"/>
 </mx:horizontalAxis>
 <mx:horizontalAxisRenderers>
 <mx:AxisRenderer placement="bottom" axis="{h1}"/>
 </mx:horizontalAxisRenderers>
 <mx:verticalAxisRenderers>
 <mx:AxisRenderer placement="left" axis="{v1}"/>
 <mx:AxisRenderer placement="left" axis="{v2}"/>
 </mx:verticalAxisRenderers>
 <mx:series>
 <mx:ColumnSeries id="cs1"
 horizontalAxis="{h1}"
 dataProvider="{SMITH}"
 yField="close"
 displayName="SMITH"
 >
 <mx:verticalAxis>
 <mx:LinearAxis id="v1" minimum="40" maximum="50"/>
 </mx:verticalAxis>
 </mx:ColumnSeries>
 <mx:LineSeries id="cs2"
 horizontalAxis="{h1}"
 dataProvider="{DECKER}"
 yField="close"
 displayName="DECKER"
 >
 <mx:verticalAxis>
 <mx:LinearAxis id="v2" minimum="150" maximum="170"/>
 </mx:verticalAxis>
 </mx:LineSeries>
 </mx:series>
 </mx:ColumnChart>
 <mx:Legend dataProvider="{myChart}"/>
</mx:Panel>
</mx:Application>

Creating a chart with a tertiary axis

Hello all,
I was wondering if it is possible to create a graph with a tertiary axis, along the lines of this:
http://peltiertech.com/Excel/Charts/TertiaryAxis.html
I have such a graph that I created in Excel, but when I import it into Numbers, it says that those types of charts are not supported. Is there any other way to create such a graph in Numbers?
Message was edited by: Kyle DePasquale

We may mimic the feature with two superposed 'normal' charts.
Yvan KOENIG (VALLAURIS, France) lundi 15 février 2010 08:59:46

How to read multiple Digital samples and plot a chart with time stamps

Hi,
Could anyone send me a code that:
1. Reads 'multiple samples(lets say 4) from single digital input'
2. 'plot digital data as a chart with time stamps'
3. Find frequency
4. Log data into file with time stamps
I have attached the code which i tried.
Thanks,
LK
Attachments:
DigitalNSample.vi ‏27 KB
DigitalNSample.vi ‏27 KB

Hi,
Could anyone send me a code that:
1. Reads 'multiple samples(lets say 4) from single digital input' using NI USB 6009 or NI USB 6251.
2. 'plot digital data as a chart with time stamps'
3. Find frequency
4. Log data into file with time stamps
I have attached the code which i tried.
Thanks,
LK
Attachments:
DigitalNSample.vi ‏27 KB

Bubble Chart with legend changes axis dimensions according to labels length

I have a Bubble Chart with legend on the right. Data are by series and the series are set dynamically with a drop down combo which replace the content of each series from time to time. Every time the series changes, also the name of the series changes and the legend on the right shows the new series names. The problem is that also the x axis dimension changes according to the new labels size, so the bubble chart changes its axis width in relation to the labels length in the legend. Is its possible to make somehow the bubble chart axis of a fixed lenght?
Xcelsius 2008, SP4, Windows XP
Thanks in advance

Hi Matt,
I just got a chance to try out your suggestions, and the
chart that is right in the main application renders the labels
fine, but the exact same code loaded in as a module doesn't. And it
never does, not even if the scale changes. Do you know why that
would be?
Mukul

Stacked bar chart with custom x axis labels

Is there a way to build this simple chart in labview that I did in Excel? I need to have many x axis labels and there could be from 5 to 100 of them depending on the data set.
Attachments:
Excel.JPG ‏33 KB

Hi id,
Thank you for your response. I hope you are doing well.
There is an example in the LabVIEW Example Finder (Help>>Find Examples..). It is titled, Stacked Bar Graph. You can search for it if you switch tabs in the Example Finder window. This should help you create a stacked bar graph. To help you with your veritcal axis labels, here is a knowledge base link that details the process:
How Can I Customize the X-Axis Labels On My LabVIEW Graph/Chart So They Appear Vertically?
http://digital.ni.com/public.nsf/allkb/1F7C1B089E45908E86256C8C0051894A?OpenDocument
Let me know if these examples help.
Best regards,
Anna L
Applications Engineer
National Instruments

How to create a chart with 2 Y-axis?

Post Author: Chantal
CA Forum: Xcelsius and Live Office
I need to create a chart for help desk activities with 1. a serie for the nb of call related to a problem received per month with the Y-axis on the left 2. a serie for the average resolution time with the Y-axis on the right Any suggestion to create such a chart , will be greatly appreciated Many thanks

Post Author: amr_foci
CA Forum: Xcelsius and Live Office
its all based on ur design of your Excel sheet
design how it will be in Excel first
then go to xeclsius
,,, by the way it looks very easy task
you can do it.

How to create a Power Pivot Chart with Dynamic X-Axis (date time) similar to that in Performance monitor (Start-- Run-- Perfmon)?

Hi,
I want to create a Power Pivot Chart and a Power View chart in Power BI where the x-axis should be the current system date time axis and it's functionality should be similar to that in Perfmon.exe tool (Start-->Run-->Perfmon)?

Hi Manjunath,
Do you mean you want to programmatically create such a dynamic chart which has a X axis of time? If you just want to do this manually, please take a look at this document which is talking about how to create charts with Power BI:
Charts and other visualizations in Power View
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Chart with custom y axis, with point values only c#

is there a way you can customize a y axis label to display only the points on a chart, or have both uniform intervals with custom values.
for example show the value of a line on a chart in the y axis at the exact point where the line appears on the chart.

Unfortunately your post is off topic as it's not specific to Microsoft Training and Certification.
This is a standard response I’ve written in advance to help the many people who post their question in this forum in error, but please don’t ignore it. The links I provide below will help you determine the right forum to ask your question
in.
For technical issues with Microsoft products that you would run into as an end user, please visit the Microsoft Answers forum ( http://answers.microsoft.com ) which has sections for Windows, Hotmail,
Office, IE, and other products.
For Technical issues with Microsoft products that you might have as an IT professional (like technical installation issues, or other IT issues), please head to the TechNet Discussion forums at http://social.technet.microsoft.com/forums/en-us, and
search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), please head to the MSDN discussion forums at http://social.msdn.microsoft.com/forums/en-us, and
search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here: http://community.dynamics.com/
If you think your issue is related to Microsoft Training and Certification and I've flagged it as Off-topic, I apologise. Please repost your question and include as much detail as possible about your problem so that someone can assist you further.
If you really have no idea where to post your question please visit the Where is the forum for…? forum http://social.msdn.microsoft.com/forums/en-us/whatforum/
When you see answers and helpful posts, please click Vote As Helpful,
Propose As Answer, and/or Mark As Answer
Jeff Wharton
MSysDev (C.Sturt), MDbDsgnMgt (C.Sturt), MCT, MCSE: Data Platform & Business Intelligence
Blog: Mr. Wharty's Ramblings
Twitter: @Mr_Wharty
MC ID:
Microsoft Transcript

Apex 4 Combined chart with multiple y axis

Hi
I am trying to create a Combined Line chart & Bar chart using Multiple y-axis
ie Line chart using one y-axis and Bar chart using another y-axis.
In Apex 4 so for i am able to to create Combined chart by adding 2 series.. but i am unable to specify y-axis for each.
Can any one help me how i can do this.
Thanks
Prabahar

I managed to do it.
Below I will post a working example of sql code and chart XML:
SQL CODE:
select NULL LINK,
trunc(AUTH.AUTHDATETIME) "AUTHDATETIME",
count(AUTH.AUTHDATETIME) "{n:Computer;t:Spline;y:ex}",
sum(AUTH.amount) "{n:Video;t:Spline}"
FROM schema.AUTH
group by trunc(AUTH.AUTHDATETIME)
order by 2 desc
<?xml version = "1.0" encoding="utf-8" standalone = "yes"?>
<anychart>
<settings>
<animation enabled="false"/>
<no_data show_waiting_animation="False">
<label>
<text></text>

</label>
</no_data>
</settings>
<margin left="0" top="" right="0" bottom="0" />
<charts>
<chart plot_type="CategorizedVertical" name="chart_1269902745139534">
<chart_settings>
<title enabled="False" />
<chart_background>
<fill type="Solid" color="0xffffff" opacity="0" />
<border enabled="false"/>
<corners type="Square"/>
</chart_background>
<data_plot_background>
</data_plot_background>
<axes>
<y_axis >
<scale type="Logarithmic" minimum="1" log_base="5"/>
 <title><text>Video Sales</text></title>
 <labels><format>{%Value}{numDecimals:0}</format></labels>
</y_axis>
<x_axis>
<scale mode="Normal" />
<title enabled="false"/>
<labels enabled="true" position="Outside">

<format><![CDATA[{%Value}{numDecimals:0,decimalSeparator:.,thousandsSeparator:\,}]]></format>
</labels>
<major_grid enabled="True" interlaced="false">
<line color="Black" />
</major_grid>
<minor_grid enabled="True">
</minor_grid>
</x_axis>
 <extra>
<y_axis name="ex">
<title><text>Computer Sales</text></title>
<labels><format>{%Value}{numDecimals:0}</format></labels>
</y_axis>
</extra>
</axes>
</chart_settings>
<data_plot_settings enable_3d_mode="false" >
<line_series>
<tooltip_settings enabled="true">
<format><![CDATA[{%Name}{enabled:False} - {%Value}{numDecimals:0,decimalSeparator:.,thousandsSeparator:\,}]]></format>

<position anchor="Float" valign="Top" padding="10" />
</tooltip_settings>
<label_settings enabled="true" mode="Outside" multi_line_align="Center">
<format><![CDATA[{%Value}{numDecimals:0,decimalSeparator:.,thousandsSeparator:\,}]]></format>
<background enabled="false"/>

</label_settings>
<line_style>
 <line enabled="true" thickness="1" opacity="1" />
</line_style>
<marker_settings enabled="True" >
<marker type="Circle" />
</marker_settings>
</line_series>
</data_plot_settings>
#DATA#
</chart>
</charts>
</anychart>
Originally I used as an example below resource:
http://anychart.apex-evangelists.com/pls/apex/f?p=755:46:0::NO:46::
Thanks.
Edited by: Jopa on 23.07.2010 1:07
Edited by: Jopa on 23.07.2010 1:08

Plotting a Chart with two Y- Axis

Similar Messages

Maybe you are looking for