Pls Assist -- AIA Installer Unable to Detect Weblogic Admin Server
Hi Everyone.
I am trying to install AIA foundation pack 11.1.1.6.0 and is encountering an error at step 4. Error says the installer cannot connect to the server.
I can confirm that the SOA admin server and managed server could be started using my node manager (nmStart()). Node manager is reachable. The installation log does not show any error.
Would you be able to advise the workaround for this one? I am running on a 64-bit RHEL 6.3.
do tell if you require more details and i will be happy to provide them to you.
Thank you in advance!
Ensure that the listen address is updated for the servers. After updating bounce the domain completly and start the installation again.
Similar Messages
-
AIA installer unable to detect managed server
Hi,
I am running AIA FP 11.1.1.7 installation and at step 4 the installer can not see the managed server.
If I type the admin server port (7009) into the 'Admin Port' box then the admin server is detected and admin server is available for selection in the 'Managed Server' drop down.
But I don't see the managed server in the drop down list.
If I put the managed server port (8009) into 'Admin Port' box I am getting Can not connect to server.
Both admin and managed servers are running and are accessible through admin console with no problems.
Reading through another similar post I made sure the listen address is set for both servers (it is set to localhost)
What I could be missing?
Thank you.Yes, thank you - I did that.
I can stop and start managed server from the console meaning from http://<host>:<port>/console of from enterprise manager http://<host>:<port:/em, no problem, server stops and starts, no errors, "Health"=OK, no errors in logs. But the drop down list still lists just the admin server (I did restart the installer of course)
i wonder if somebody could drop (paste) here a copy of the working config.xml file for the domain which "allows" to install aia that is where managed server is visible to the installer as it should, I can't figure what the problem might be.
Thanks much -
Unable to Start Weblogic Admin Server
I am working on Windows environment with Weblogic 8.1 sp3
when I start the admin from windows services the service shows as started but not able to get to console and also I tried starting the admin server from the command line it just stays here...
<Sep 27, 2005 1:48:12 PM CDT> <Notice> <Log Management> <BEA-170019> <The server log file
:\Projects\Domains\Broadlane\AdminServer\AdminServer.log is opened. All server side log events will be written to this file.>
And also I enabled Verbose to see if it gives more info...but trying to load tons of files and hangs at some place
[Opened C:\bea\JDK142~1\jre\lib\rt.jar]
[Opened C:\bea\JDK142~1\jre\lib\sunrsasign.jar]
[Opened C:\bea\JDK142~1\jre\lib\jsse.jar]
[Opened C:\bea\JDK142~1\jre\lib\jce.jar]
[Opened C:\bea\JDK142~1\jre\lib\charsets.jar]
[Loaded java.lang.Object from C:\bea\JDK142~1\jre\lib\rt.jar]
[Loaded java.io.Serializable from C:\bea\JDK142~1\jre\lib\rt.jar]
[Loaded java.lang.Comparable from C:\bea\JDK142~1\jre\lib\rt.jar]
[Loaded java.lang.CharSequence from C:\bea\JDK142~1\jre\lib\rt.jar]
[Loaded java.lang.String from C:\bea\JDK142~1\jre\lib\rt.jar]
[Loaded com.octetstring.vde.util.TimedActivityTask]
[Loaded com.octetstring.vde.backend.standard.BackupTask]
[Loaded com.octetstring.vde.util.TimedActivityThread]
[Loaded com.octetstring.vde.backend.standard.TransactionLog]
[Loaded java.io.RandomAccessFile from C:\bea\JDK142~1\jre\lib\rt.jar]
[Loaded com.octetstring.vde.backend.standard.Cache]
[Loaded com.octetstring.vde.backend.standard.DataFile]
[Loaded com.octetstring.vde.util.ObjectPool]
[Loaded com.octetstring.vde.backend.standard.RAFPool]
[Loaded com.octetstring.vde.backend.standard.TransactionProcessor]
and at this place just stays here with out going further, It is really frustrating me, because it doesnt throw any exceptions, I cleaned up everything in config.xml file just to start with basic with out any applications and database configurations in it, but it didnt helped me either
Appreciate any help!
Thanks in advanceHi hrushi,
i'm not refering to the Weblogic console but your physical server console. You already did most of the tasks.
Please do the steps below:
1) Logon to your server Solaris console
2) Get the PID of your Admin server Java process ex: ps -ef | grep java
3) Execute the following command: kill -3 <pid>
4) This will generate a Thread Dump within your Admin server startup log (normally nohup.out)
5) Extract the Thread Dump and look at the Thread Stack Trace of the Weblogic start-up Thread
6) The thread name you are looking or is: "Main Thread"
7) Update this post with Stack Trace of the "Main Thread"
Regards,
P-H -
Error starting weblogic Admin server
Hi All,
I am not very familiar with Fusion and weblogic but here is my situation:
Background: I am trying to install Fusion Middleware so I can integrate Oracle Transport Management with E-Business Suite (as per note Integrating Oracle E-Business Suite Release 12 with Oracle BPEL in Oracle SOA Suite 11g (Doc ID 1321776.1))
I just installed the following on Oracle Enterprise Linux 64bits
- SOA Suite 11.1.1.7.0
- Weblogic Server 10.3.6
-JDK 1.7.0_25
-Jdev 11.1.1.7.0
When starting the weblogic Admin server using "DOMAIN_HOME/startWebLogic.sh' I get an error:
Starting weblogic with Java version:
Unrecognized option -jrockit
Error: Could not create the Java virtual machine
I found a few thread with similar issue (for different versions of SOA suite) where it got fixed by changing some parameters in the cmd file but I am not sure they apply to my case.
Is the jdk version compatible? (I can start JDeveloper ok) , if not which one is the appropriate version. If i need to change it, can you provide details of how to do it? (I am not expert on SOA/Jdev )
Can you please help me here ?
Thanks in advance!Well, I tested it
java -version and it shows :
1.7.0_25
Java HotSpot 64 bit Server VM
--> So I guess the problem is I don't seem to have the jrockit.
I donwloaded it (Rel 28.7) and installed it. During installation it says "for JDK 1.6.0_45"
Anyway. I let it install anyway and I modified the PATH to point to the Jrockit bin directory. Then run java -version and it now shows JDK 1.6.0_45 and jvm as rockit
Now I tried to start the weblogic server and I get the same error. it still uses the JDK 1.7
So.. again.. is this supported with JDK 7 ?
How can I fix it now that I installed everything using the JDK 7?
Thanks -
Weblogic Admin Server Doesnt start.
I have installed Oracle 11g, RCU (WCC 11.1.1.6), Web Center Content 11.1.1.6 (C:\Oracle\Middleware\Oracle_ECM1) and created a domain for Content and was trying to restart the Weblogic Admin Server (C:\Oracle\Middleware\user_projects\domains\WC_Domain6\bin).
I get the below error:
'C:\Oracle\MIDDLE~1\Oracle_ECM1\ucm\idc\bin\\Installer -noCommEnv -platform win3
2 -dumpFormat %s=%s -show IDC_NATIVE_PATH' is not recognized as an internal or e
xternal command,
operable program or batch file.
Content Server provided no native path information in idcCommEnv.cmd.
'C:\Oracle\MIDDLE~1\Oracle_ECM1\ucm\idc\bin\\Installer -noCommEnv -platform win3
2 -show NativeOsUtils_classpath' is not recognized as an internal or external co
mmand,
operable program or batch file.
The directory name is invalid.
Any help is greatly appreciated. Thank you.I have a batch file i create that will start everything up. I don't think i've ever seen your error, but the admin server can be called using the startWeblogic up one dir from Bin, i dont know if it makes a difference but i've always used that one. Copy and paste below into a text file (update your paths and urls accordingly), rename to a .bat and you should be able to start everything at once
@echo off
START "ECMAdmin" C:\Oracle\Middleware\user_projects\domains\IMTST\startweblogic.cmd
TIMEOUT 100
START "NodeManager" C:\Oracle\Middleware\wlserver_10.3\server\bin\startNodeManager
TIMEOUT 15
START "soaserver1" C:\Oracle\Middleware\user_projects\domains\IMTST\bin\startmanagedweblogic soa_server1 http://IMTSTipm01:7001
START "UCMserver1" C:\Oracle\Middleware\user_projects\domains\IMTST\bin\startmanagedweblogic UCM_server1 http://IMTSTipm01:7001
TIMEOUT 150
START "IPMserver1" C:\Oracle\Middleware\user_projects\domains\IMTST\bin\startmanagedweblogic IPM_server1 http://IMTSTipm01:7001 -
Weblogic Admin server restart issue
While restarting Oracle Weblogic Admin server, it is not running after below log.
INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver.
Mar 12, 2015 7:33:07 PM oracle.security.jps.internal.idstore.util.LibOvdUtil pushLdapNamesToLibOvd
INFO: Pushed ldap name and types info to libOvd. Ldaps : DefaultAuthenticator:idstore.ldap.provideridstore.ldap.Hi,
These messages are Info Message Can you please post the complete Error stack for the same
Check the below threads which have similar issue reported
Integrated JDeveloper Weblogic 12C issues
Weblogic server not starting due to OutOfMemory
SOA Suite 12c Integrated Weblogic / Coherence Issue
Unable to run my application
Hope it helps -
Cannot start Weblogic Admin Server
When we start weblogic Admin server, we got the following message.
# A fatal error has been detected by the Java Runtime Environment:
# SIGBUS (0x7) at pc=0x000000373368316b, pid=348, tid=139846128580352
# JRE version: 6.0_20-b20
# Java VM: OpenJDK 64-Bit Server VM (19.0-b09 mixed mode linux-amd64 compressed oops)
# Derivative: IcedTea6 1.9.7
# Distribution: Red Hat Enterprise Linux Server release 6.0 (Santiago), package rhel-1.39.1.9.7.el6-x86_64
# Problematic frame:
# C [libc.so.6+0x8316b]
# If you would like to submit a bug report, please include
# instructions how to reproduce the bug and visit:
# http://icedtea.classpath.org/bugzilla
--------------- T H R E A D ---------------
Current thread is native thread
siginfo:si_signo=SIGBUS: si_errno=0, si_code=2 (BUS_ADRERR), si_addr=0x00007f3077b08000
Registers:
RAX=0x00007f3077b08000, RBX=0x00007f3077b08000, RCX=0x0000000000000000, RDX=0x0000000000000000
RSP=0x00007f3076d12a68, RBP=0x00007f3076d12b80, RSI=0x0000000000000000, RDI=0x00007f3077b08000
R8 =0x0000000000007f80, R9 =0x0000000000200000, R10=0x0000000000000000, R11=0x0000003733682c6a
R12=0x0000000000008000, R13=0x0000000000000003, R14=0x00007f3076d136a8, R15=0x00007f3076d12ab0
RIP=0x000000373368316b, EFL=0x0000000000010206, CSGSFS=0x0000000000000033, ERR=0x0000000000000006
TRAPNO=0x000000000000000e
Register to memory mapping:
RAX=0x00007f3077b08000
Best Regards,Two things you may want to try
1. It complains about libc.so.6+0x8316b. Check with your Linux administrator to see if they have recent version of libc.so file at the kernel and if not, upgrade and try to start admin server (Make sure you remove the cache, tmp folders under server folder)
2. check your /etc/hosts and see if anything strange like duplicate host file, ip mismatch etc
Post your results after trying the above
Thanks
Lawrence Manickam
http://toyork.blogspot.ca -
OBIEE hosting on WebLogic - Admin Server vs. Managed Server
What is the difference between the two possible configurations of WebLogic: Admin Server and Managed Server?
I need to identify which one is adequate to host OBIEE Presentation Services.http://download.oracle.com/docs/cd/E14571_01/web.1111/e13716/understand_domains.htm#DOMCF115
What Is a Domain?
+An Oracle WebLogic Server administration domain is a logically related group of Oracle WebLogic Server resources. Domains include a special Oracle WebLogic Server instance called the Administration Server, which is the central point from which you configure and manage all resources in the domain. Usually, you configure a domain to include additional Oracle WebLogic Server instances called Managed Servers. You deploy Web applications, EJBs, Web Services, and other resources onto the Managed Servers and use the Administration Server for configuration and management purposes only.+
I added the emphasis on "usually". You will always have exactly one administration server for a domain. That administration server can host other applications, it's simply a question of whether or not it's a good idea to do it. If you need to scale-up your application at a later time so that more than one server would be required - deploying your application to managed servers makes this very easy as you can just add managed servers. Typically other Oracle products in Fusion Middleware have domain templates and other installer / configuration options that default to deploying their infrastructure to managed servers. Sometimes in development / resource-constrained environments people override those defaults and try and run everything on a single Admin Server. It's usually possible, but may not be the most flexible going forward. -
Cannot access weblogic admin server console
All,
I am not able to access https://<myhostname>:7001/console URL after sucessfull installation of web logic server on linux. During installation I also created base_domain.
Here is the log during the AdminServer startup :-
<Oct 4, 2009 9:02:02 AM PDT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<Oct 4, 2009 9:02:02 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Oct 4, 2009 9:02:02 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on fe80:0:0:0:20c:29ff:fe28:8f5b:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.119.129:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 0:0:0:0:0:0:0:1:7001 for protocols iiop, t3, ldap, snmp, http.>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "base_domain" running in Production Mode>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Oct 4, 2009 9:02:03 AM PDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
From the above it looks like there was no issue in starting up the admin server. But when I try to access the weblogic admin server url, it does not show up.
Can you please help me to resolve the issue if any so that I can access the admin console?
THanks,
Amithey, same here...
this is what i get when starting up the console
<May 4, 2010 12:52:51 PM WIT> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<May 4, 2010 12:52:51 PM WIT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on xxx.xxx.xxx.xxx:7777 for protocols iiop, t3, ldap, snmp, http.>
<May 4, 2010 12:52:51 PM WIT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7777 for protocols iiop, t3, ldap, snmp, http.>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "xxxxxDomain" running in Production Mode>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<May 4, 2010 12:52:51 PM WIT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
but when i go to the browser
http://xx.xx.xx.xx:7777/console..
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
xx.xx.xx 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
i still try to fix this.. -
Installing Weblogic Admin Server as service - service won't start
I'm installing Weblogic Admin Server as a Service in Weblogic 10 on a Windows 2008 R2 box.
The service installs correctly, but when I start it, it immeidately stops with this error:
"The <service name> service on Local Computer started and then stopped. Some services stop automatically if they have no work to do, for example, the performance logs and alerts service."
Also, sometimes it gives me this error:
"Error 1053: The service did not respond to the start or control request in a timely fashion"
Thanks in advance for any help. Here is my installSvc.cmd:
@echo off
SETLOCAL
set PRODUCTION_MODE=true
SET JAVA_VENDOR=BEA
SET JAVA_HOME=C:\bea10_64\jr
set USERDOMAIN_HOME=C:\PA_Prod
set SERVER_NAME=AdminServer
set DOMAIN_NAME=PA_domain
set HOST=10.0.1.28
set PORT=7001
set WL_HOME=C:\bea10_64\wlserver_10.3
call "%WL_HOME%\common\bin\commEnv.cmd"
@rem Check that the WebLogic classes are where we expect them to be
:checkWLS
if exist "%WL_HOME%\server\lib\weblogic.jar" goto checkJava
echo The WebLogic Server wasn't found in directory %WL_HOME%\server.
echo Please edit your script so that the WL_HOME variable points
echo to the WebLogic installation directory.
goto finish
@rem Check that java is where we expect it to be
:checkJava
if exist "%JAVA_HOME%\bin\java.exe" goto runWebLogic
echo The JDK wasn't found in directory %JAVA_HOME%.
echo Please edit your script so that the JAVA_HOME variable
echo points to the location of your JDK.
goto finish
:runWebLogic
if not "%JAVA_VM%" == "" goto noResetJavaVM
if "%JAVA_VENDOR%" == "BEA" set JAVA_VM=-jrocket
if "%JAVA_VENDOR%" == "HP" set JAVA_VM=-server
if "%JAVA_VENDOR%" == "Sun" set JAVA_VM=-server
:noResetJavaVM
if not "%MEM_ARGS%" == "" goto noResetMemArgs
set MEM_ARGS=-Xms32m -Xmx200m
:noResetMemArgs
@echo on
set CLASSPATH=%WEBLOGIC_CLASSPATH%;%CLASSPATH%
if "%ADMIN_URL%" == "" goto runAdmin
@echo on
set CMDLINE="%JAVA_VM% %MEM_ARGS% %JAVA_OPTIONS% -classpath \"%CLASSPATH%\" -Dweblogic.Name=%SERVER_NAME% -Dweblogic.management.username=%WLS_USER% -Dweblogic.management.server=\"%ADMIN_URL%\" -Dweblogic.ProductionModeEnabled=%PRODUCTION_MODE% -Djava.security.policy=\"%WL_HOME%\server\lib\weblogic.policy\" weblogic.Server"
goto finish
:runAdmin
@echo on
set CMDLINE="%JAVA_VM% %MEM_ARGS% %JAVA_OPTIONS% -classpath \"%CLASSPATH%\" -Dweblogic.Name=%SERVER_NAME% -Dweblogic.management.username=%WLS_USER% -Dweblogic.ProductionModeEnabled=%PRODUCTION_MODE% -Djava.security.policy=\"%WL_HOME%\server\lib\weblogic.policy\" weblogic.Server"
:finish
rem *** Set up extrapath for win32 and win64 platform separately
if "%WL_USE_X86DLL%" == "true" set EXTRAPATH=%WL_HOME%\server\native\win\32;%WL_HOME%\server\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%WL_HOME%\server\native\win\32\oci920_8
if "%WL_USE_IA64DLL%" == "true" set EXTRAPATH=%WL_HOME%\server\native\win\64\;%WL_HOME%\server\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%WL_HOME%\server\native\win\64\oci920_8
if "%WL_USE_AMD64DLL%" == "true" set EXTRAPATH=%WL_HOME%\server\native\win\x64\;%WL_HOME%\server\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%WL_HOME%\server\native\win\x64\oci920_8
rem *** Install the service
"%WL_HOME%\server\bin\beasvc" -install -svcname:"beasvc %DOMAIN_NAME%_%SERVER_NAME%" -javahome:"%JAVA_HOME%" -execdir:"%USERDOMAIN_HOME%" -maxconnectretries:"%MAX_CONNECT_RETRIES%" -host:"%HOST%" -port:"%PORT%" -extrapath:"%EXTRAPATH%" -password:"%WLS_PW%" -cmdline:%CMDLINE%
ENDLOCALThe problem lies in your additions to the script installSvc.cmd
Say we have for example the following directory as our middleware-home
c:\bea. In this directory we also have installed a JVM say C:\bea\jrockit_160_05_R27.6.2-20.
When you create a domain (by using the config.cmd script) the domain you created
is placed in the directory c:\bea\user_projects\domain\base_domain (assuming we have
called the domain base_domain).
Now we have to add the following parameter definitions to installSvc.cmd
@rem JAVA_VENDOR and JAVA_HOME are set in the call to commEnv.cmd
@rem JAVA_VENDOR is checked in commEnv.cmd to be Oracle or Sun
set JAVA_VENDOR=Oracle
set JAVA_HOME=C:\bea\jrockit_160_05_R27.6.2-20
set USERDOMAIN_HOME=C:\bea\user_projects\domains\base_domain
set SERVER_NAME=AdminServer
set DOMAIN_NAME=base_domain
@rem i am assuming it is running on localhost
set HOST=127.0.0.1
set PORT=7001In your case it becomes (just a guess)
@rem use Oracle instead of BEA
set JAVA_VENDOR=Oracle
@rem the location where your JVM is installed
set JAVA_HOME=C:\bea10_64\jr
@rem if bea10_64 is your middleware home and PA_domain is your domain name
set USERDOMAIN_HOME=C:\bea10_64\user_projects\domains\PA_domain
@rem the rest should be alright
set SERVER_NAME=AdminServer
set DOMAIN_NAME=PA_domain
set HOST=10.0.1.28
set PORT=7001If you add the following to uninstallSvc.cmd you can uninstall the service
set SERVER_NAME=AdminServer
set DOMAIN_NAME=base_domain -
Not able to start the weblogic admin server
Hi,
I am getting the error while starting the weblogic admin server of OAM console.
Below is the stack trace of the error
####<Sep 18, 2013 4:47:14 AM IST> <Info> <Security> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459834234> <BEA-000000> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
####<Sep 18, 2013 4:47:14 AM IST> <Info> <Security> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459834387> <BEA-000000> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
####<Sep 18, 2013 4:47:14 AM IST> <Info> <WebLogicServer> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459834847> <BEA-000000> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.10-b01 from Sun Microsystems Inc.>
####<Sep 18, 2013 4:47:15 AM IST> <Info> <Management> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459835526> <BEA-000000> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
####<Sep 18, 2013 4:47:16 AM IST> <Critical> <Security> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459836980> <BEA-000000> <Could not decrypt the username attribute value of {AES}MCSBg4hMfpsECc7LXYV6gR52kLO5DHUWyo9I1UZXMaE= from the file /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/security/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/security/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException.>
####<Sep 18, 2013 4:47:16 AM IST> <Critical> <Security> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459836980> <BEA-000000> <Could not decrypt the password attribute value of {AES}1hgzo9/RGaCoWQyFXIJEbYMqmz5gg9LQzjQ/J6DxbQM= from the file /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/security/boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/security/boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException.>
####<Sep 18, 2013 4:47:29 AM IST> <Notice> <WebLogicServer> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849081> <BEA-000000> <Server state changed to STARTING>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <WorkManager> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849088> <BEA-000000> <Initializing self-tuning thread pool>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <WebLogicServer> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849138> <BEA-000000> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 Copyright (c) 1995, 2011, Oracle and/or its affiliates. All rights reserved.>
####<Sep 18, 2013 4:47:29 AM IST> <Notice> <Log Management> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849208> <BEA-170019> <The server log file /ebiz/Middleware/user_projects/domains/OAM_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Log Management> <oad.4iapps.com> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1379459849213> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Diagnostics> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849260> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849305> <BEA-002622> <The protocol "t3" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849305> <BEA-002622> <The protocol "t3s" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849306> <BEA-002622> <The protocol "http" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849306> <BEA-002622> <The protocol "https" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849307> <BEA-002622> <The protocol "iiop" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849307> <BEA-002622> <The protocol "iiops" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849308> <BEA-002622> <The protocol "ldap" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849308> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849310> <BEA-002622> <The protocol "cluster" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849311> <BEA-002622> <The protocol "clusters" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849313> <BEA-002622> <The protocol "snmp" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849314> <BEA-002622> <The protocol "admin" is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <Server> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849314> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <RJVM> <oad.4iapps.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1379459849325> <BEA-000570> <Network Configuration for Channel "AdminServer"
Listen Address :7003
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Sep 18, 2013 4:47:29 AM IST> <Critical> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849347> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.reflect.InvocationTargetException
java.lang.AssertionError: java.lang.reflect.InvocationTargetException
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:175)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:1092)
at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:737)
at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1096)
at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1109)
at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:600)
at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:296)
at weblogic.server.channels.ChannelService.start(ChannelService.java:254)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:173)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:1092)
at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:737)
at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1096)
at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1109)
at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:600)
at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:296)
at weblogic.server.channels.ChannelService.start(ChannelService.java:254)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: weblogic.security.internal.encryption.EncryptionServiceException
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:139)
at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:187)
at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:96)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy._invokeServiceMethod(DescriptorManager.java:173)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl$SecurityProxy.decrypt(DescriptorManager.java:192)
at weblogic.descriptor.DescriptorManager$SecurityServiceImpl.decrypt(DescriptorManager.java:114)
at weblogic.descriptor.internal.AbstractDescriptorBean._decrypt(AbstractDescriptorBean.java:1092)
at weblogic.management.configuration.SecurityConfigurationMBeanImpl.getCredential(SecurityConfigurationMBeanImpl.java:737)
at weblogic.security.internal.ServerPrincipalValidatorImpl.getSecret(ServerPrincipalValidatorImpl.java:88)
at weblogic.security.internal.ServerPrincipalValidatorImpl.sign(ServerPrincipalValidatorImpl.java:67)
at weblogic.security.service.PrivilegedActions$SignPrincipalAction.run(PrivilegedActions.java:62)
at java.security.AccessController.doPrivileged(Native Method)
at weblogic.security.service.SecurityServiceManager.createServerID(SecurityServiceManager.java:1096)
at weblogic.security.service.SecurityServiceManager.getServerID(SecurityServiceManager.java:1109)
at weblogic.security.service.SecurityServiceManager.sendASToWire(SecurityServiceManager.java:600)
at weblogic.server.channels.ChannelService.resetQOS(ChannelService.java:296)
at weblogic.server.channels.ChannelService.start(ChannelService.java:254)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
>
####<Sep 18, 2013 4:47:29 AM IST> <Notice> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849410> <BEA-000365> <Server state changed to FAILED>
####<Sep 18, 2013 4:47:29 AM IST> <Error> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849410> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Sep 18, 2013 4:47:29 AM IST> <Notice> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849411> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Sep 18, 2013 4:47:29 AM IST> <Info> <WebLogicServer> <oad.4iapps.com> <AdminServer> <main> <<WLS Kernel>> <> <> <1379459849412> <BEA-000236> <Stopping execute threads.>
Kindly help me to solve this issue.
Is anyone had faced this issue.....Hi,
I had tried by putting the username and password in boot.properties but we are getting the same issue.
we tried by editing the config.xml file of the domain.
i.e. by
Before: <credential-encrypted>{AES}b3I7UhWtRyj4DuKMIDVtW4Ln2nzH+HiYRhhQw1H2qpU0qJMOaDlK8iFZ+LvlJu+iZs6pptFJgWz8ryyudL1Zyvf00Rg11z9Iib7hoDC8covMFuig8wx7iOGK88zeKH7U</credential-encrypted>
After: <credential-encrypted>MyCredentialInPlainText</credential-encrypted>
and restarted the admin server but shows the same error.
kindly suggest us... -
Weblogic Admin server - Configuration/Server Start/Arguments ignored?
Hi,
I'm trying to specify a http proxy for a WebLogic Admin Server in order for an application to access external resources. I've placed the settings into the "Server Configuration / Server Start / Arguments", and verified that they have been saved into the config/config.xml file for that domain:
<server-start>
<arguments>-Dhttp.proxyHost=[XXXX] -Dhttp.proxyPort=8080</arguments>
<password-encrypted>[XXXX]</password-encrypted>
</server-start>
However, no matter how I start the server, these settings are ignored despite that the documentation states these should be added to the java command line.
starting weblogic with Java version:
java version "1.6.0_19"
Java(TM) SE Runtime Environment (build 1.6.0_19-b04)
Java HotSpot(TM) 64-Bit Server VM (build 16.2-b04, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=256m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sysext_manifest_classpath weblogic.Server
As a test I created a new managed server in the same domain, specifying the same startup properties, and they were picked up during startup.
If I manually place the settings into the bin/setDomainEnv.cmd batch file for the domain they are also picked up and work.
Is there an undocumented restriction on Admin Servers that they ignore the "Server Start / Arguments" setting, or is there something else I can check as to why this is not working?
Many thanks,
- Micha.Umm... I already pasted the relevant snippet out of the config.xml, but following is the entire file. The startup arguments, as specified in the admin console, are:
-Dhttp.proxyHost=[XXXXXXXX] -Dhttp.proxyPort=8080
which matches what is saved in the config.xml.
<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator/1.0/passwordvalidator.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd">
<name>wls_starter</name>
<domain-version>10.3.2.0</domain-version>
<security-configuration>
<name>wls_starter</name>
<realm>
<sec:authentication-provider xsi:type="wls:default-authenticatorType"></sec:authentication-provider>
<sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-role-mapperType"></sec:role-mapper>
<sec:authorizer xmlns:xac="http://xmlns.oracle.com/weblogic/security/xacml" xsi:type="xac:xacml-authorizerType"></sec:authorizer>
<sec:adjudicator xsi:type="wls:default-adjudicatorType"></sec:adjudicator>
<sec:credential-mapper xsi:type="wls:default-credential-mapperType"></sec:credential-mapper>
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType"></sec:cert-path-provider>
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
<sec:password-validator xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator" xsi:type="pas:system-password-validatorType">
<sec:name>SystemPasswordValidator</sec:name>
<pas:min-password-length>8</pas:min-password-length>
<pas:min-numeric-or-special-characters>1</pas:min-numeric-or-special-characters>
</sec:password-validator>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>[XXXXXXXXXX]</credential-encrypted>
<node-manager-username>weblogic</node-manager-username>
<node-manager-password-encrypted>[XXXXXXXX]</node-manager-password-encrypted>
</security-configuration>
<server>
<name>AdminServer</name>
<max-http-message-size>-1</max-http-message-size>
<ssl>
<enabled>false</enabled>
</ssl>
<log>
<file-name>logs/AdminServer.log</file-name>
<rotation-type>bySize</rotation-type>
<number-of-files-limited>true</number-of-files-limited>
<file-count>7</file-count>
<file-min-size>500</file-min-size>
<rotate-log-on-startup>true</rotate-log-on-startup>
<logger-severity>Trace</logger-severity>
<logger-severity-properties></logger-severity-properties>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<domain-log-broadcast-severity>Notice</domain-log-broadcast-severity>
<memory-buffer-severity>Debug</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>false</redirect-stdout-to-server-log-enabled>
<domain-log-broadcaster-buffer-size>1</domain-log-broadcaster-buffer-size>
</log>
<machine>[XXXXXXXXXX]</machine>
<listen-port>8080</listen-port>
<listen-port-enabled>true</listen-port-enabled>
<web-server>
<frontend-http-port>0</frontend-http-port>
<frontend-https-port>0</frontend-https-port>
<keep-alive-enabled>true</keep-alive-enabled>
<keep-alive-secs>30</keep-alive-secs>
<https-keep-alive-secs>60</https-keep-alive-secs>
<post-timeout-secs>30</post-timeout-secs>
<max-post-size>-1</max-post-size>
<send-server-header-enabled>false</send-server-header-enabled>
<wap-enabled>false</wap-enabled>
<accept-context-path-in-get-real-path>false</accept-context-path-in-get-real-path>
</web-server>
<listen-address></listen-address>
<java-compiler>javac</java-compiler>
<tunneling-enabled>false</tunneling-enabled>
<tunneling-client-ping-secs>45</tunneling-client-ping-secs>
<tunneling-client-timeout-secs>40</tunneling-client-timeout-secs>
<server-start>
<arguments>-Dhttp.proxyHost=[XXXXXXXX] -Dhttp.proxyPort=8080</arguments>
<password-encrypted>[XXXXXXX]</password-encrypted>
</server-start>
<server-life-cycle-timeout-val>30</server-life-cycle-timeout-val>
<startup-timeout>0</startup-timeout>
<graceful-shutdown-timeout>30</graceful-shutdown-timeout>
<ignore-sessions-during-shutdown>false</ignore-sessions-during-shutdown>
<client-cert-proxy-enabled>false</client-cert-proxy-enabled>
</server>
<embedded-ldap>
<name>wls_starter</name>
<credential-encrypted>[XXXXXXXXXX]</credential-encrypted>
</embedded-ldap>
<configuration-version>10.3.2.0</configuration-version>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<app-deployment>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<module-type>ear</module-type>
<source-path>[XXXXXXXXXX]</source-path>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<machine>
<name>[XXXXXXXXXX]</name>
</machine>
<jms-server>
<name>WseeJmsServer</name>
<target>AdminServer</target>
<persistent-store>WseeFileStore</persistent-store>
</jms-server>
<jms-server>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<persistent-store>WseeFileStore</persistent-store>
</jms-server>
<self-tuning>
<work-manager>
<name>weblogic.wsee.mdb.DispatchPolicy</name>
<target>AdminServer</target>
</work-manager>
</self-tuning>
<file-store>
<name>WseeFileStore</name>
<directory>WseeFileStore</directory>
<target>AdminServer</target>
</file-store>
<jms-system-resource>
<name>WseeJmsModule</name>
<target>AdminServer</target>
<sub-deployment>
<name>BEA_JMS_MODULE_SUBDEPLOYMENT_WSEEJMSServer</name>
<target>WseeJmsServer</target>
</sub-deployment>
<descriptor-file-name>jms/wseejmsmodule-jms.xml</descriptor-file-name>
</jms-system-resource>
<jms-system-resource>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<sub-deployment>
<name>[XXXXXXXXXX]</name>
<target>[XXXXXXXXXX]</target>
</sub-deployment>
<descriptor-file-name>[XXXXXXXXXX]</descriptor-file-name>
</jms-system-resource>
<admin-server-name>AdminServer</admin-server-name>
<jdbc-system-resource>
<name>[XXXXXXXXXX]</name>
<target>AdminServer</target>
<descriptor-file-name>[XXXXXXXXXX]</descriptor-file-name>
</jdbc-system-resource>
<saf-agent>
<name>ReliableWseeSAFAgent</name>
<target>AdminServer</target>
<store>WseeFileStore</store>
</saf-agent>
</domain> -
WebLogic Admin server fails to start after reboot
Hi Gurus,
Weblogic Admin server won't start up after a server reboot. Note that weblogic was gracefully shutdown before the restart.
Also note that the following files were accidentally deleted after the reboot (but I don't think that should cause an issue..):
/opt/shared/apps/hyperion/Oracle/Middleware/user_projects/domains/EPMSystem/servers/AdminServer/data/store/default/_WLS_ADMINSERVER000000.DAT
/opt/shared/apps/hyperion/Oracle/Middleware/user_projects/domains/EPMSystem/servers/AdminServer/data/store/diagnostics/WLS_DIAGNOSTICS000000.DAT
Looking at the AdminServer.log:
*####<Oct 11, 2012 11:27:53 AM EDT> <Critical> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969273846> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: weblogic.management.provider.EditFailedException:*
java.lang.AssertionError: weblogic.management.provider.EditFailedException:
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.<init>(DomainRuntimeServiceMBeanImpl.java:79)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.getInstance(DomainRuntimeServiceMBeanImpl.java:68)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
at weblogic.management.deploy.internal.DeploymentManagerImpl.<init>(DeploymentManagerImpl.java:83)
at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:233)
at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:155)
at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:27)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: weblogic.management.provider.EditFailedException:
at weblogic.management.provider.internal.EditAccessImpl.ensureBeanTreeLoaded(EditAccessImpl.java:1754)
at weblogic.management.provider.internal.EditAccessImpl.getCurrentDomainBean(EditAccessImpl.java:241)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.<init>(DomainRuntimeServiceMBeanImpl.java:76)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.getInstance(DomainRuntimeServiceMBeanImpl.java:68)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
at weblogic.management.deploy.internal.DeploymentManagerImpl.<init>(DeploymentManagerImpl.java:83)
at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:233)
at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:155)
at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:27)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: org.xml.sax.SAXParseException: Premature end of file.
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:195)
at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(ErrorHandlerWrapper.java:174)
at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:388)
at com.sun.org.apache.xerces.internal.impl.XMLScanner.reportFatalError(XMLScanner.java:1414)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl$PrologDriver.next(XMLDocumentScannerImpl.java:1059)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648)
at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScannerImpl.java:140)
at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:511)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:808)
at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(DOMParser.java:235)
at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:284)
at weblogic.xml.jaxp.RegistryDocumentBuilder.parse(RegistryDocumentBuilder.java:163)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
at weblogic.management.provider.internal.ConfigReader.convert(ConfigReader.java:106)
at weblogic.management.provider.internal.ConfigReader.<init>(ConfigReader.java:70)
at weblogic.management.provider.internal.ConfigReader.<init>(ConfigReader.java:64)
at weblogic.management.provider.internal.EditAccessImpl.loadBeanTree(EditAccessImpl.java:1917)
at weblogic.management.provider.internal.EditAccessImpl.loadBeanTreeFromPending(EditAccessImpl.java:1807)
at weblogic.management.provider.internal.EditAccessImpl.ensureBeanTreeLoaded(EditAccessImpl.java:1740)
at weblogic.management.provider.internal.EditAccessImpl.getCurrentDomainBean(EditAccessImpl.java:241)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.<init>(DomainRuntimeServiceMBeanImpl.java:76)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl$SINGLETON.getInstance(DomainRuntimeServiceMBeanImpl.java:68)
at weblogic.management.mbeanservers.domainruntime.internal.DomainRuntimeServiceMBeanImpl.getDomainConfiguration(DomainRuntimeServiceMBeanImpl.java:132)
at weblogic.management.deploy.internal.DeploymentManagerImpl.initAppDeploymentRuntimes(DeploymentManagerImpl.java:239)
at weblogic.management.deploy.internal.DeploymentManagerImpl.<init>(DeploymentManagerImpl.java:81)
at weblogic.management.deploy.internal.DeploymentServerService.initializeDeploymentManager(DeploymentServerService.java:256)
at weblogic.management.deploy.internal.DeploymentServerService.startAdminServerDeploymentService(DeploymentServerService.java:232)
at weblogic.management.deploy.internal.DeploymentServerService.init(DeploymentServerService.java:154)
at weblogic.management.deploy.internal.DeploymentPreStandbyServerService.start(DeploymentPreStandbyServerService.java:26)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
####<Oct 11, 2012 11:27:54 AM EDT> <Notice> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274051> <BEA-000365> <Server state changed to FAILED>
####<Oct 11, 2012 11:27:54 AM EDT> <Error> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274053> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Oct 11, 2012 11:27:54 AM EDT> <Notice> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274069> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMX> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274138> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.domainruntime .>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMX> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274140> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.edit .>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMX> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274141> <BEA-149513> <JMX Connector Server stopped at service:jmx:iiop://3.56.11.196:7001/jndi/weblogic.management.mbeanservers.runtime .>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <WebService> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274146> <BEA-220028> <Web Service reliable agents are suspended.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <WebService> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274153> <BEA-220029> <Web Service reliable agents are shut down.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <MessagingBridge> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274318> <BEA-200001> <The messaging bridge service has successfully shut down.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMS> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274426> <BEA-040308> <JMS service is suspending.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMS> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274506> <BEA-040107> <Undeployed 8 default connection factories.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JMS> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274510> <BEA-040015> <JMS shutdown is complete.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JDBC> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274530> <BEA-001144> <Force Suspending the JDBC service.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JDBC> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274536> <BEA-001146> <Force suspend of the JDBC service completed.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JDBC> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274538> <BEA-001147> <Shutting down the JDBC service.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <JDBC> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274552> <BEA-001149> <Shutdown of the JDBC service completed.>
####<Oct 11, 2012 11:27:54 AM EDT> <Info> <WebLogicServer> <tnsq08041.energy.ge.com> <AdminServer> <Main Thread> <<WLS Kernel>> <> <> <1349969274694> <BEA-000236> <Stopping execute threads.>
Kindly guide me with this. Thanks!
Edited by: Kent Pawar. on Oct 11, 2012 8:51 AMIssue is :
Caused By: weblogic.management.provider.EditFailedException:
One probable reason can be some change made to the config.xml file . If you have previous backup for the config.xml file then try to replace the config.xml file and restart the server .
Another reason for this exception may be that there were some changes made to configuration through the Admin Console which were not activated completely and Admin Server was restarted . under this scenario weblogic will create a /pendig dir and have a config.xml file created there with the un-activated changes .
some workaround you can try to restore the Admin Server :
Under domain dir ,
\pending directory -- take backup and delete the dir .
Under Admin Server Dir :
data\store --- take backup and delete the dir .
thanks,
Sandeep -
WebLogic admin server not starting.
Hi all,
I have a problem with my WebLogic Admin server not starting. Following a VM reboot last week our admin servers are no longer starting. On this particular server we have 3 admin servers serving 3 separate environments.
Theserver seems to be getting stuck right at the very start. I have tried removing tmp, cache and ldap directories. Searched for and removed all .lok files. I have manually turned on full debug to try and flush some extra information through standard out but no luck. It is very peculiar. When we have exported the domain to another box and started the admin server it has come up successfully.
This is the output from the logs - this is literally as far as it get before it hangs and does nothing. As far as I know the next thing WebLogic is doing is checking the version. Has anyone any ideas what the problem could be? It is server wide as all 3 admin servers on the same box are suffering the same problem.
This is Weblogic 10.3.2 on a Solaris vm
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
CLASSPATH=/apps/Oracle/Middleware64/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/lib/tools.jar:/apps/Oracle/Middleware64/utils/config/10.3/config-launch.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic_sp.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic.jar:/apps/Oracle/Middleware64/modules/features/weblogic.server.modules_10.3.2.0.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/webservices.jar:/apps/Oracle/Middleware64/modules/org.apache.ant_1.7.0/lib/ant-all.jar:/apps/Oracle/Middleware64/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/apps/Oracle/Middleware64/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/xqrl.jar
PATH=/apps/Oracle/Middleware64/wlserver_10.3/server/bin:/apps/Oracle/Middleware64/modules/org.apache.ant_1.7.0/bin:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/jre/bin:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/bin:/usr/bin:/usr/sfw/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
Starting WLS with line:
/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/bin/java -jrockit -Xms256m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic.policy -Xverify:none -da -Dplatform.home=/apps/Oracle/Middleware64/wlserver_10.3 -Dwls.home=/apps/Oracle/Middleware64/wlserver_10.3/server -Dweblogic.home=/apps/Oracle/Middleware64/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/apps/Oracle/Middleware64/patch_wls1032/profiles/default/sysext_manifest_classpath weblogic.Server
<09-Jan-2013 18:32:06 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.1-21-133393-1.6.0_20-20100512-2127-solaris-sparcv9 from Oracle Corporation>Just a wild guess (as you have restarted the physical servers), it could be related to the entropy of the machine.
What you can try to do is edit the java.security file in the $JAVA_HOME/jre/lib/security directory.
Find the entry securerandom.source and edit the value to file:/dev/./urandom (instead of file:/dev/urandom) -
Hi Team,
I am trying to started weblogic admin server from windows i am getting below error from admin server logs.
but I am able to start weblogic from the command prompt.
I verified classpath are same in command prompt and windows services and Node Manager also working fine from windows services.
Please help me on this.it is urgent for me .
####<Nov 14, 2012 8:31:26 PM GMT+05:30> <Info> <Socket> <mindview> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352905286929> <BEA-000436> <Allocating 2 reader threads.>
####<Nov 14, 2012 8:31:26 PM GMT+05:30> <Info> <Socket> <mindview> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352905286929> <BEA-000446> <Native IO Enabled.>
####<Nov 14, 2012 8:31:27 PM GMT+05:30> <Info> <IIOP> <mindview> <AdminServer> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352905287039> <BEA-002014> <IIOP subsystem enabled.>
####<Nov 14, 2012 8:31:28 PM GMT+05:30> <Info> <Security> <mindview> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352905288695> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Nov 14, 2012 8:31:28 PM GMT+05:30> <Info> <Security> <mindview> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352905288898> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_9V5rIdcvntKDauQNwFIW41HchnU=>
####<Nov 14, 2012 8:31:28 PM GMT+05:30> <Info> <Security> <mindview> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352905288992> <BEA-090511> <The following exception has occurred:
com.bea.common.engine.ServiceInitializationException: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for IAMSuiteAgent is not specified.
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:46)
at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:299)
at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:220)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1785)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for IAMSuiteAgent is not specified.
at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:42)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:46)
at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:299)
at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:220)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1785)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
####<Nov 14, 2012 8:31:28 PM GMT+05:30> <Error> <Security> <mindview> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352905288992> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for IAMSuiteAgent is not specified..
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for IAMSuiteAgent is not specified.
at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:341)
at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:220)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1785)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: com.bea.common.engine.ServiceInitializationException: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for IAMSuiteAgent is not specified.
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:365)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:46)
at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:299)
at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:220)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1785)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused By: com.bea.common.engine.SecurityServiceRuntimeException: [Security:097533]SecurityProvider service class name for IAMSuiteAgent is not specified.
at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:42)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:363)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:315)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:257)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:72)
at weblogic.security.service.internal.WLSIdentityServiceImpl.initialize(WLSIdentityServiceImpl.java:46)
at weblogic.security.service.CSSWLSDelegateImpl.initializeServiceEngine(CSSWLSDelegateImpl.java:299)
at weblogic.security.service.CSSWLSDelegateImpl.initialize(CSSWLSDelegateImpl.java:220)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.InitializeServiceEngine(CommonSecurityServiceManagerDelegateImpl.java:1785)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:442)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
####<Nov 14, 2012 8:31:28 PM GMT+05:30> <Notice> <Security> <mindview> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1352905288992> <BEA-090082> <Security initializing using security realm myrealm.>
####<Nov 14, 2012 8:31:29 PM GMT+05:30> <Critical> <WebLogicServer> <mindview> <AdminServer> <main> <<WLS Kernel>> <> <> <1352905289023> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
>
####<Nov 14, 2012 8:31:29 PM GMT+05:30> <Notice> <WebLogicServer> <mindview> <AdminServer> <main> <<WLS Kernel>> <> <> <1352905289039> <BEA-000365> <Server state changed to FAILED>
####<Nov 14, 2012 8:31:29 PM GMT+05:30> <Error> <WebLogicServer> <mindview> <AdminServer> <main> <<WLS Kernel>> <> <> <1352905289039> <BEA-000383> <A critical service failed. The server will shut itself down>
####<Nov 14, 2012 8:31:29 PM GMT+05:30> <Notice> <WebLogicServer> <mindview> <AdminServer> <main> <<WLS Kernel>> <> <> <1352905289039> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
####<Nov 14, 2012 8:31:29 PM GMT+05:30> <Info> <WebLogicServer> <mindview> <AdminServer> <main> <<WLS Kernel>> <> <> <1352905289039> <BEA-000236> <Stopping execute threads.>
Thanks in advance.
Regards,
Ravi.Hi,
Check this link :
Re: myrealm error when start through node manager
Maybe you are looking for
-
Visiting the Apple developer site, pages have a task list at the top of a very long page. When I click on a task which is linked to an anchor on the same page, the screen briefly flashes up the intended topic, then redraws content about a screen abov
-
I did not have this problem earlier today. I haven't dropped it recently or any such thing. I have, however, used two different audio jacks today. Although it makes keyboard sounds when I type in my pass code, it doesn't make the sounds otherwise. I
-
Photoshop Elements 11 Editor running on Mac Yosemite will not process Raw files
Upgraded MAC from OS X 10.6.8 to Yosemite 10.10.2 Also updated iPhoto to v9.6 in order to work with Yosemite (and iPhoto's digital camera raw to 6.03). Raw files in iphoto are no longer able to be edited in PSE 11 Raw converter. Raw files from iPh
-
New iMac, 24" 3.06 Ghz - WIRED Connection Problem
Hi All - This machine has been in service 2 weeks. About a week ago, the connectivity to the internet has become faulty. I can successfully connect to a web site, but after about a minute or so, it will drop. Using the same browsers and MacOS on a Ma
-
I have learning material for two modules: (a) Sun Java 2 Developer SCJD CX-310-252A/CX-310-027, and (b) Java 2 5.0 Programmer Certification 310-055. I know that these kind of exams were organized by the Sun Microsystems, Inc., which was bought by Ora