Pls. explain what is “Split number” and the “Capacity ID” 10000426

When I switching the network activity to TECO, the system throws an error “There are CATS records for the object to be deleted”. However we have transferred all the CATS records, but in CATSDB table found “Split number” as 1 and there is “Capacity ID” 10000426.
Can anyone explain what is “Split number” and how to check the created “Capacity ID” 10000426
Thanks in advance.
Regards,
Harisha

Hi
A "split" is a resource assigned to your network activity
You are assigning 1 or more individuals to perform that activity
In CJ20N view the splits using the Personnel Tab of the Network Activity
Each person assigned to undertake that Activity is a split
So the first person assigned will be split 1 and the second split 2 and so on
If I remember correctly the Capacity ID is the internal no of the Person you have assigned to that Split (but I may be mistaken and it moght be the actual HR Mini Master No)
With regards to your particular issue OSS note 894300 may help
Hope this helps
Steve

Similar Messages

  • How do I view a video that was sent to me through imessage to my iphone 5S?It was sent by another iphone user.I clicked the link and entered my phone number and the password provided but it still won't open.What should I do?

    How do I view a video that was sent to me through imessage to my iphone 5S?It was sent by another iphone user.I clicked the link and entered my phone number and the password provided but it still won't open.What should I do?

    Is this your issue >  http://support.apple.com/kb/HT5818
    If so...
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.

  • What does it mean when you receive a text on your iphone 6 form your own number and the message is duplicated on each side (sent/recieved) and has "verizon message" with a long number at the end of the text, duplicated as well?

    what does it mean when you receive a text on your iphone 6 from your own number and the message is duplicated on each side (sent/received) and has "verizon message" with a long number at the end of the text, duplicated as well?

        Great question stacybrownie! Let's get to the bottom of this so that it's not a cause for concern. When a message is sent to/from your own number, it will display as one sent, one received. This makes it display two messages as you are seeing. Let's clarify the second part of your question. Where do you see "Verizon Message" exactly? What is the long number at the end of the text? When did this start and is it with all text messages or only this instance?
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • Hi friends, pls explain What is DB lookups in xi

    1)pls explain What is DB lookups in xi. how many types ?

    Hi,
    How to Perform DBLook-ups from XI Utilizing J2EE JDBC:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9aedca11-0d01-0010-3b90-9ea04182875f
    XI lookups : When you want some data from R3 or DB into mapping , then you need to use some kind of user exit like Lookup, it will stop the execution process and goto respective database and get the data and back to mapping , this kind of machanism.
    We will use DB lookups for any other database like DB,Oracle,SQL, MS Access..etc.
    We will use RFC lookup for SAP R3 .
    See thebelow links
    DB lookup - /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
    SOAP Lookup - /people/bhavesh.kantilal/blog/2006/11/20/webservice-calls-from-a-user-defined-function
    Lookup - /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
    Also read thru this to get more idea on lookups - http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0
    Lookup’s in XI made simpler - /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
    How to check JDBC SQL Query Syntax and verify the query results inside a User Defined Function of the Lookup API -
    http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
    /people/prasad.illapani/blog/2006/10/25/how-to-check-jdbc-sql-query-syntax-and-verify-the-query-results-inside-a-user-defined-function-of-the-lookup-api
    Lookups - /people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
    Lookups - /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
    /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
    http://help.sap.com/saphelp_nw04/helpdata/en/cf/406642ea59c753e10000000a1550b0/content.htm
    /people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
    Lookups with XSLT - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8e7daa90-0201-0010-9499-cd347ffbbf72
    /people/sravya.talanki2/blog
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/05a3d62e-0a01-0010-14bc-adc8efd4ee14
    How we have to create the lookups?
    Check this weblogs with some screenshots on how to achieve this:
    /people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
    /people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
    /people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
    /people/sap.user72/blog/2005/12/06/optimizing-lookups-in-xi
    /people/morten.wittrock/blog/2006/03/30/wrapping-your-mapping-lookup-api-code-in-easy-to-use-java-classes
    Regards,
    Priyanka.

  • I have Sony camera DSC-HX400V which does not have raw program. Pls explain what can I do with jpeg only

    I have Sony camera DSC-HX400V which does not have raw program. Pls explain what can I do with lightroom 5 with jpeg only
    Arieh Gertler
    [email protected]

    You can do just about anything with a JPEG image that you can with a raw image. The advantage of working with raw is that it is possible to work with more extremes in exposure. More highlights and shadows can be recovered in a raw image, but there is a lot that can be done with JPEG images as well. All of the library functions and keywording and all the other features of Lightroom can be used on JPEG images just as easily as they can be used on raw images.
    Having said all that, you might be more comfortable using Photoshop Elements. Both programs have trial versions that you can use for 30 days to decide which one or whether both will work for you. It would probably be to your advantage to try them out and decide for yourself.

  • HT1338 Macbook Pro, OS X 10.8.1 when start software update receive error msg NSURLErrorDomain error -1100, pls advise what is this error and how to check software update?

    Macbook Pro, OS X 10.8.1 when start software update receive error msg NSURLErrorDomain error -1100, pls advise what is this error and how to check software update?
    Thank you, best regards
    Sergey

    Several users are reporting a server problem with Software Update. Why not wait and try again later today or tomorrow to see if the problem is resolved.
    If the problem is on your computer then give this a try:
    Fix for Software Update
    See Troubleshooting Automatic Software Update in Mac OS X.
    Delete the following files:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Home/Library/Preferences/com.apple.SoftwareUpdate.plist
    /Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist where "xxx" is a number.
    /Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)

  • Excise No. using  Accounting Document Number and the P.O. number

    Hi All ! In my GL report, I'm displaying the Accounting Document Number and the P.O. number.
    Now, the requirement is to display the excise no..
    Tried different tables in SE11 using J_1EXC for excise detials, but to no avail.
    And last which vendor to pick, Because vendors in P.O and BSEG differs.
    If I use the BSEG-BELNR I get a different vendor & If I use the P.O. no. in EKKO then also I get a different vendor.
    Please suggest.

    Hi,
    Actually the vendor in the accounting document and PO should match. If not look in table EKBE, It will have the accounting document or at least the invoice receipt against which accounting document would have been created. Check if the vendor number matches with the invoice receipt.
    Regarding the excise number I'm not sure what you mean, If you mean excise invoice number, you can look at the J_1IEXCDTL
    J_1IEXCHDR tables. You could check with FC on what basis the document is getting created to make out the relation ship. If it is vendor excise no etc. you can hit F1 help to find out the table etc.
    Hope it helps.
    Sujay

  • What in Natural Number in the Planning View of Process Chains

    Hi Experts,
    Can anyone explain what is Natural number column in the Planning View of the Process Chain?
    Thanks,
    Rajan

    Hello,
    I am a new user. Using SAP BW 7. When I select planning view I would like to see a chain X in gray. How can I? I noticed that the natural number in grayed chains is 3 instead of 0: perhaps this is the procedure? I have to change the natural number?
    Help me!
    Thanks for answer!

  • Please explain what are form groups and form routines

    Hello ABAP Experts,
    Could you please explain what are form groups and form routines? I would certainly appreciate some examples.
    Thank you in advance, Aleksandra

    Hi,
    I've found the Form Group in transaction J7LE. It is part of Industry Specific solution for hi tech companies, so I'm not sure if you'll be able to access it. In this tcode you define master data of your partner. The first step is to choose the Form Group - they simply group Form Routines. Depending on which one I choose, different entry fields get activated. However there are routines that will enable input to the same fields, so I suppose there must be some additional functionality behind it. Could you please specify what does it mean?
    >>Form ROUTINES, are subroutines for modularizing your code<<
    I'm afraid I have no ABAP experience at all...
    Cheers, A.

  • Billing doc number and the accounting FI doc not matching

    Dear All,
    We have created the same Number range for the Billing Document and for the Accounting Document.
    But when my Billling document get stuck for any Account determination error. ( Billing Document number is cretaed)
    But the Accounting Document is not created due to accounting determination error.
    Here the problem is accounting number is not getting reserved for the billing document. Therefore number sequence is not comming properly.(Same billing documnet number and the Same Accounting document number is not matched.)
    Please help me.
    Thanks in advance
    Uwanthi

    >
    Uwanthi Perera wrote:
    > Dear All,
    >
    > We have created the same Number range for the Billing Document and for the Accounting Document.
    >
    > But when my Billling document get stuck for any Account determination error. ( Billing Document number is cretaed)
    >
    > But the Accounting Document is not created due to accounting determination error.
    >
    > Here the problem is accounting number is not getting reserved for the billing document. Therefore number sequence is not comming properly.(Same billing documnet number and the Same Accounting document number is not matched.)
    >
    > Please help me.
    >
    > Thanks in advance
    >
    > Uwanthi
    Hello
    Best practice is to have different number ranges for invoices and a/c documents. pl create and assign accordingly you wont have this issues..
    Thanks

  • I've got an iPad and iPhone 4S, both of which are set up for facetime. When someone calls me, both the iPad and phone ring, even though the phone is set to receive facetime calls on the number and the iPad is set for an email account. why is this?

    I've got an iPad and iPhone 4S, both of which are set up for facetime. When someone calls me, both the iPad and phone ring, even though the phone is set to receive facetime calls on the number and the iPad is set for an email account.
    How can I change the setup so on the email only the iPad rings and on the phone number only the phone rings?

    No it's not stealing. They have an allowance that you can share with so many computers/devices. You'll have to authorize her computer to play/use anything bought on your acct. You can do this under the Store menu at top when iTunes is open on her computer.
    As far as getting it all on her computer....I think but I am not sure (because I don't use the feature) but I think if you turn on Home Sharing in iTunes it may copy the music to her computer. I don't know maybe it just streams it. If nothing else you can sign into your acct on her computer and download it all to her computer from the cloud. Not sure exactly how to go about that, I haven't had to do that yet. I wonder if once you authorize her computer and then set it up for automatic downloads (under Edit>Preferences>Store) if everything would download. Sorry I'm not much help on that.

  • Could someone please explain what P to P and Order to Cash cycle?

    Could someone please explain what Procurement to Pay and Order to Cash cycles mean? Thanks.

    Hi,
    Pl.visit following links for P2P cycle.
    http://erpschools.com/articles/procure-to-pay-cycle#13480480234441&79412::resize_frame
    http://oracleapplicationsfunctional.blogspot.in/2011/08/procure-to-pay-p2p-cycle-in-purchasing.html
    http://www.shareoracleapps.com/2010/05/procure-to-pay-cycle-in-oracle-apps-r12.html
    and visit following links for O2C cycle.
    http://erpschools.com/articles/order-to-cash-cycle#13480481951911&21367::resize_frame
    http://www.youtube.com/watch?v=2GhAbWGz7iA
    http://knoworacle.wordpress.com/2008/12/08/data-flow-for-11i-order-to-cash-cycle/
    http://oracleapps88.blogspot.in/2012/08/order-to-cash-cycle.html
    http://www.slideshare.net/anand5538/order-to-cash-cycle-9647606
    HTH
    Sanjay

  • Hi all when I send a text to a contact (iphone4s) the contacts name changes to a phone number and the name is lost. I then have to resave it again, googled it but can't see anyone with the same issue, any ideas ?

    Hi all when I send a text to a contact (iphone4s) the contacts name changes to a phone number and the name is lost. I then have to resave it again, googled it but can't see anyone with the same issue, any ideas ?

    There is another setting for "Start Conversation from", that needs to be set to phone number.

  • How to select the 5 most maximumst number and the 5 most minumumst number?

    Dear All,
    I draw a program. That is every loop the random number.vi create a number. I want to update the data in every loop to display the first 5 maximum number and the minumum.
    I don't know how to do it. Could you please give me some suggestions.
    Every reply is thankful.
    My LabVIEW version is 7.1
    Thanks!
    Hugo
    Attachments:
    max&min.vi ‏12 KB

    Hi Hugo,
    try those steps:
    1) make a loop with 2 shift registers, initialized with arrays of 5 elements, set to 0.5 each
    2) in the loop you append those two arrays containing 5 elements and the new random number (range 0...1)
    3) sort the resulting 11 element array
    4) take the first 5 for the 5 "smallest values" and the last 5 for "biggest values" and feed them into the corresponding shift register
    5) next iteration!
    Message Edited by GerdW on 08-13-2007 09:20 AM
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • BOM Item number and the pr number created through network

    We can create PR through network. If we know the PR number and the item number, how do we find the BOM item number in the network?
    BOM item number
    Item number of the BOM components copied into the order.

    RSDB
    RSBD POSNR

Maybe you are looking for