PLS HELP!! DELL DIMENSION L866r

I am having some problem with Solaris 8 installation over dell computer. I have Intel 810 chipset on the motherboard. I need the video driver for onboard video.
First I install the O.S. it didnt find the right video driver. I Select VGA or text mode and reboot my dell computer. The "kdmconfig" screen come up telling me the driver is not matched.
Some guys advised me that I can download this patch from the sun site
http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access
they are saying that I must Select "x86 Drivers" from the web site. Right now I cannot run GUI programs such as
Admintool. I saved the patches on my other hard drive.
How can I put these patches back on the hard drive that is being used for solaris.
Need ur help...
changez

/Re: Help - Dell 8300 Dimension Soundcard driver<Well there is no for the Li've! in Vista and of course windows 7, but I have one that works in Vista and has to be worth a try in Win7 as the sound card drivers are very similar.
Have a look [url="http://www.filefront.com/0960626/SBL_VTDRV_LB_2_0_000A.exe/">here[/url].
SB Li've! series Vista Support Pack Created by daniel_k
This pack Supports all Li've! cards with a Hardware EMU0K DSP chipset (OEM / Retail models):
- Li've! PCI52 / 4. / Value / Player / MP3+ / X-Gamer / Platinum
- Li've! 5. MP3+ / X-Gamer / Digital / Platinum
Does NOT support the following OEM / Retail models:
- Host / software-based cards including Li've! 24-bit
- any external Li've! soundcards
NOTE: May have issues with more than 2 gigs of ram in Vista

Similar Messages

Help - Dell 8300 Dimension Soundcard driver

+\ok, i have?this old Pc Dell 8300 Dimension. I recently upgraded my os to 32bits-win7 and it's working great except i have no sound. I went to dell driver site to download the creative lab - sound blaster driver but? it was only for xp. I tried with that xp driver but it didn't work. Any suggestions?! Any help will be appreciated! Thanks!

/Re: Help - Dell 8300 Dimension Soundcard driver<Well there is no for the Li've! in Vista and of course windows 7, but I have one that works in Vista and has to be worth a try in Win7 as the sound card drivers are very similar.
Have a look [url="http://www.filefront.com/0960626/SBL_VTDRV_LB_2_0_000A.exe/">here[/url].
SB Li've! series Vista Support Pack Created by daniel_k
This pack Supports all Li've! cards with a Hardware EMU0K DSP chipset (OEM / Retail models):
- Li've! PCI52 / 4. / Value / Player / MP3+ / X-Gamer / Platinum
- Li've! 5. MP3+ / X-Gamer / Digital / Platinum
Does NOT support the following OEM / Retail models:
- Host / software-based cards including Li've! 24-bit
- any external Li've! soundcards
NOTE: May have issues with more than 2 gigs of ram in Vista

Li'l help w/an old dell dimension sb live ct4780 (98

I've got this old dell dimension that I swapped hd's on --- the boot dri've now being 98se (was xp).
so, this sound card seemed to work fine w/the old xp dri've, but after reinstalling 98se I get no sound at all.
I d/l'd and installed what I thought were the correct drivers, turned up volumes, and unchecked any mutes, but I have no idea what's wrong.
everything looks ok under device mgr, although every time I reinstalled win98 (several times) it would hang at 6% saying it can't find some flush registry file.
everything else seems to work normally.
there ARE a couple mystery 'unknown devices' listed.
I think one was some kind of pci bus, and one was..something I forget.
anyway, I don't even have a clue where to start, so any suggestions are appreciated.
thx

ok, here's what dell offers me:
http://support.dell.com/support/downloads/driverslist.aspx?os=W98&osl=EN&catid=-&impid=-&servicetag=7YJ30&SystemID=DIM_PNT_P03_XPS_B___&hi dos=WW&hidlang=en
I have already gotten the 800 series integrated chipset driver update, but not the security one.

Video card dell dimension 3000

Hey, everybody.
Im planning to buy a new video card for my ; dell dimension 3000, Intel(R) , Celeron(R) CPU 2.4GHz, 2.00 gb of ram, and I believe power supply is 250 W.
So here is the bunch of questions;
1. Seems like my computer uses a pci type memory cards, my question here is can I use these wide known pci e cards?
2. Second one is I seen that there are different sizes of video cards out there for sale, so how do I figure out which one I should use, I mean is there a maximum number of mb that my computer supports or I could use any size of video card?
..and I think so far I do not have more questions about my video memory card purchase.
*all help would be appreciated Thanks*

1. you will not be able to use a PCI-E card in the Dimension 3000.
2. Your choices are very limted on PCI videocards and the performance increase is not worth the money that a new card will cost you. You could go with a 512mb PCI card but with the slow celeron processor and and low end power supply. You still will not be able to play of the new games that are out right now.
It's time for a new computer.
**If you like my answer then click the little Star under my username.
**If my response answered your question then click the Solved button. Thanks

I want to move a PSE 5 catalog and photos from an old Dell Dimension desktop to already installed PSE 13 on a new Dell XPS. Can it be done?

I want to move a PSE 5 catalog and photos from an old Dell Dimension desktop to already installed PSE 13 on a new Dell XPS8700. Can it be done? If so, how? Link to any clear cut instructions?

Hi,
You can visit Common catalog upgrade issues | Organizer | Elements 6 or later and see if it works.
You can also visit Converting a catalog from previous versions | Learn Photoshop Elements 11 | Adobe TV for visual help.
Regards
Kishan

Solaris 8 on Dell Dimension 4100 (**ACPI Tables)

I downloaded Solaris 8 Binaries and created Device Configuration Assistant bootable diskette. When I try to boot up my system (Dell Dimension 4100) with the bootable diskette I created to install solaris on one partition, it pops up an error message before the device configuration assistant gets loaded. It says
WARNING:ACPI Tables not in reclaim memory
prom_panic:kmem_free block already free.
Could anyone guide me how do I get over it??

After thrashing for 2 weeks with the onboard 7880 SCSI and onboard 7890 RAID controllers, I was finally able to load up Solaris 8 on a Poweredge 2400. (4/01 build)
The only way I was able to do it was configure the server as below:
7880 SCSI: CD-ROM drive only device on this controller, set to ID 5.
7890 RAID controller: Disabled. Dont' believe Dell or Adaptec, this card will not work with Solaris 7 or 8. Even with the RAID chip removed and running as standard SCSI controller, it still would not work.
Adaptec 2940 U2W: 9G Quantum Atlas V drive with HP SureStore DAT 24i drive.
PERC II RAID controller yanked out of older 4100 system, 3 drives running RAID 5.
Important note: Do not attach anything to the 7880 controller besides the CD. The system will not boot if attempting to boot to the HD or if you attempt to boot from CD, it will hang at the adp.bef file.
Hope this helps..
Mike

Connecting MacBook Pro to Dell Dimension

I have a MacBook Pro, a Dell Dimension and a 24" Dell Monitor. Im trying to connect the two computers to one monitor, keyboard and mouse. Its my understanding that a KVM switch should work but my main concern is that Im trying to use a wireless mac keyboard and a wireless mac mighty mouse. Also, Im going to need to have enough outputs on the switch to be able to share the speakers, a USB printer (Epson R220) and the USB card reader thats built into the monitor. Is there a KVM switch that will be able to handle this?
Is there a better way to be able to share these computers?
Please help!

Wheather the wireless keyboard and mouse will work seems to depend on the adapter / bluetooth software stack being used.
Some people have had success with the DLink DBT-120 adapter, some don't. I have tried it with DBT-120 as well and it did not work. However, I tried it with the version that is currently sold in retail stores, which is the "C1" build version. This one uses a Bluetooth software stack from Toshiba and that seems to be the issue. The B1 version that some people where successful with apparently uses a WIDCOMM stack, and that seems to be the key.
Now, some people are saying that you have to have the DBT-120 adapter and a certain old version of the WIDCOMM stack, 1.4.2.10, to get it to work. But after searching the web quite a bit, I believe I found a better solution that will work with ANY bluetooth adapter (or built in bluetooth) that uses ANY version of the WIDCOMM stack.
Here is what you do:
1. Install you Bluetooth adapter as described by the manufacturer and reboot your machine.
2. Switch the Apple wireless mouse on into pairing mode and watch the lower right side of your screen closely for messages from windows. There will be a message saying that pairing failed because of a missing code. Click on that message and in the window that opens enter 0000 as code. Now your mouse should work.
3. Press Win Start button, choose Run and then type regedit and press enter to access windows registry editor.
4. In the registry editor search for and select -> HKEYCURRENTUSER\Software\Widcomm\BtConfig\General
5. Set the key 'PinCodeWord' to a decimal value of 1111
6. Set the key 'UseFixedPin' to a decimal value of 1
7. Then attempt pairing. When you get to the greyed PIN screen type 1111 using OTHER keyboard THAN Apple Bluetooth keyboard.
8. Press the Return key on the Apple keyboard on the number pad, not the regular Retrun key.
7. Enjoy your nice Apple wireless keyboard and mouse.
I am currently typing this with the Apple wireless keyboard and mouse on a HP laptop. The bluetooth adapter is from Belkin and the WIDCOMM stack is 4.x.

JScrollPane wont scroll .. pls help

hi to all,
I have a scrollpane that i am displaying a graph in, and they will be large graphs, 10000 nodes with about cardinality 10 for each node.
I can generate the graph output no problems but my scrollbars dont allow me to scroll the pane, and i cant figure out why.
I'm assuming that i should be doing something with the viewport once i add the graph, but i dont know what.
can anyone pls help me,
also can anyone suggest how i go about zooming in and out. im thinking its just resizng the viewport, but i need to work out why i cant scroll before i tackle that.
package graphappz.ui;
import java.awt.*;
import java.awt.geom.*;
import javax.swing.*;
import graphappz.graph.Graph;
import java.util.Iterator;
import graphappz.graph.Vertex;
import graphappz.graph.Edge;
import java.awt.event.MouseListener;
import java.awt.event.MouseEvent;
public class GraphWindow
    extends JPanel {
JEditorPane graphWindow;
JScrollPane graphView;
Dimension d = new Dimension();
Point2D p = null;
GraphViewer viewer;
public GraphWindow() {
    graphWindow = new JEditorPane();
    graphWindow.setText("");
    viewer = new GraphViewer();
    graphView = new JScrollPane(viewer);
    graphView.setHorizontalScrollBarPolicy(JScrollPane.
                                           HORIZONTAL_SCROLLBAR_ALWAYS);
    graphView.setVerticalScrollBarPolicy(JScrollPane.
                                         VERTICAL_SCROLLBAR_ALWAYS);
    graphView.getViewport().setBackground(Color.white);
    graphView.setBorder(BorderFactory.createEtchedBorder());
    graphView.setToolTipText("Graph Output Display Window");
    repaint();
public JScrollPane getGraphView() {
    return this.graphView;
public Dimension getSize() {
    graphView.setPreferredSize(new Dimension(520, 440));
    return graphView.getPreferredSize();
class GraphViewer
      extends JPanel {
    public void paintComponent(Graphics g) {
      super.paintComponent(g);
      int nodeWidth = 20;
      int nodeHeight = 20;
      if (graphappz.Main.graph != null) {
        Graph graph = graphappz.Main.graph;
        Iterator iter = graph.edgeIter();
        while (iter.hasNext()) {
          Edge e = (Edge) iter.next();
          Vertex v_0 = e.getv0();
          Vertex v_1 = e.getv1();
          if ( ( (v_0.getLayoutPosition() != null) ||
                (v_1.getLayoutPosition() != null))) {
            Point2D.Double pos_0 = v_0.getLayoutPosition();
            Point2D.Double pos_1 = v_1.getLayoutPosition();
            // draw the edge
            g.setColor(Color.red);
            g.drawLine( (int) pos_0.x + (nodeWidth / 2),
                       (int) pos_0.y + (nodeHeight / 2),
                       (int) pos_1.x + (nodeWidth / 2),
                       (int) pos_1.y + (nodeHeight / 2));
            // draw the first node
            g.setColor(Color.blue);
            g.drawOval( (int) pos_0.x, (int) pos_0.y, nodeWidth, nodeHeight);
            g.fillOval( (int) pos_0.x, (int) pos_0.y, nodeWidth, nodeHeight);
            // draw the second node
            g.setColor(Color.blue);
            g.drawOval( (int) pos_1.x, (int) pos_1.y, nodeWidth, nodeHeight);
            g.fillOval( (int) pos_1.x, (int) pos_1.y, nodeWidth, nodeHeight);
            // draw the edge
            g.setColor(Color.black);
            g.drawString(v_0.getReference() + "", (int) pos_0.x + 5,
                         (int) pos_0.y + 14);
      else {
        graphappz.util.Debug.debugText.append("\n graph is null, can't draw it");
        //TODO: show new Alert_Dialog
    public GraphViewer() {
      this.setBackground(Color.white);
      this.addMouseListener(new MouseListener() {
        public void mouseClicked(MouseEvent e) {}
        public void mousePressed(MouseEvent e) {}
        public void mouseReleased(MouseEvent e) {}
        public void mouseEntered(MouseEvent e) {}
        public void mouseExited(MouseEvent e) {}
}

Scrollbars will appear when the preferred size of the panel is greater than the preferred size of the scrollpane.
When you add components (JButton, JTextField...) to a panel then the preferred size can be calculated by the layout manager.
When you draw on a panel the layout manager has no idea what the size of you panel is so you need to set the preferrred size yourself:
panel.setPreferredSize(...);

Dell Dimension desktop sometimes won't communicate with my HP Photosmart 6510 wireless printer

At random times, when trying to print from Dell Dimension desktop to HP Photosmart 6510 wireless printer, I get a message that the computer can't communicate with the printer. The printer shows that it is connected to the Internet. I haven't changed any settings. Each time this happens, I unplug the printer and router, but it doesn't fix the problem. After about 20 minutes or so, it prints normally. It always happens at the most inopportune times. Any suggestions about how I can keep this from recurring?

These settings are for setting up your wireless printer to stay connected to your router, keeps wireless devices better connected and makes your router secure and hack proof.
1. Set a static IP in the printer (see step 6) outside the DHCP range of the router (check your manual).
2. Verify in the printer that 'Auto Off' is disabled. Use the Embedded Web Server (EWS) by going to the
    printers IP address in your browsers address bar, click Settings Tab/Auto Off. Or use the Printer
    Assistant, Printer Home Page (EWS).
In the router: (Refer to your router manual for information)
3. Use a fixed wireless channel like 1,6 or 11, never 'auto', try channel 1 first then the rest.
4. Set router to 20Mhz only, or 145Mbps depending on router.
5. Always use WPA2-AES (Personal) encryption, but you can try ‘mixed’ mode.
6. Disable WPS and never use it and disable UPnP for the routers security. Nobody can hack your
   system now and helps with wireless connectivity (if you want to know why, search the web).
7. If you have a dual band router (2.4Ghz and 5.0Ghz bands), make sure the SSID’s are NOT the same,
   they must be different for all bands, even for any Guest networks.
8. Save all settings. Power off both, wait 5 mins. Power on router wait 3 mins.
9. Power on printer and verify it reconnects to router.
Windows 7/8/8.1   Is Network Discovery on or off?
Control Panel\Network and Internet\Network and Sharing Center\Advanced sharing settings.
Under Home or Work (current profile) \ Network Discovery.
Select "Turn on network discovery" and save changes.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP Officejet J6410 causes Dell Dimension desktop to drop internet connection

When I plug in and switch on my HP Officejet J6410 to a Dell Dimension 2400 with Windows XP, it causes the internet connection to drop out. On switching the printer off, the internet connection is re-established. The internet connection is via a wi-fi adapter to a BT broadband hub. The printer is connected directly and the wireless button switched off.
There is no problem with the printer when using with an HP Pavilion notebook.
This question was solved.
View Solution.

Hi Ian404,
Sounds like the issue is with the computer. Have you tried uninstalling the printer, and then reinstall using the current software?
Try using the scrubber built into the CD or Download.
From Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-62866-1&cc=us&dlc=en&lc=en&...=
10. Run the download to reinstall the printer
If software was downloaded and extracted to your system:
1. Type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356)
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-62866-1&cc=us&dlc=en&lc=en&...=
10. Run the download to reinstall the printer
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Wireless Networking / Solaris and a Dell Dimension 8100

I'm getting ready to buy a Dell Dimension 8100 and I want to install Win2K, Solaris 8, and Mandrake Linux on it. I'm also interested in setting up a Wireless network in my house. I can get the following wireless setup from Dell, but will it work with Solaris?
Dell Truemobile 1150 Wireless Networking PCI Card and Base Station
Thanks,
Matt

Hi,
Yes, based on its specs, it has wireless g:
Connectivity
USB 2.0
Ethernet
PictBridge
Wireless 802.11g
HP Printer Adapters with Bluetooth Wireless Technology (HP models bt450, bt500) (optional)
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

"Exception in thread "main" java.lang.NumberFormatException"error..pls help

Hi,
I'm trying to run a program I've written but keeping getting this error:
Exception in thread "main" java.lang.NumberFormatException: empty String
at sun.misc.FloatingDecimal.readJavaFormatString(FloatingDecimal.java:994)
at java.lang.Double.parseDouble(Double.java:482)
at data.newLineToRead(data.java:21)
at data.data(data.java:34)
at train.main(train.java:86)
I'm not quite sure where I'm going wrong.I've included the data class and train class.Could someone pls help me.
Thanks a lot.
Data Class:
import java.io.*;
import java.util.*;
public class data{
        private static parameter par;
        private static double[][] x=new double[par.n()][par.D()];
        public static double[] t=new double[par.n()];
        public static void newLineToRead(String LineToRead,int n){
        int d=0;
        String stringToRead=new String();
                for(int i=0;i<=LineToRead.length();i++){
                        StringTokenizer str = new StringTokenizer (stringToRead,"/t");
                        String[] strtemp = new String[str.countTokens()];
                                while (str.hasMoreTokens()){
                                x[n][d++] = Double.parseDouble(str.nextToken());
                                d++;
                                System.out.println(x[n][d++]);
                        stringToRead=new String();
                t[n]=Double.parseDouble(stringToRead);
                x[n][par.d()]=1.0;
        public static void data() throws IOException{
        DataInputStream in=null;
                try{
                        in=new DataInputStream(new FileInputStream(par.f()));
                        for(int n=0;n<par.n();n++){
                        String LineToRead=in.readLine();
                                if(LineToRead.length()==0){
                                        System.out.println("Remove empty lines");
                                else{
                                        newLineToRead(LineToRead,n);
                }finally{if(in!=null){in.close();}}
        public static double x(int n,int d){return x[n][d];}
        public static double t(int n){return t[n];}
}Train Class
import java.io.*;
import java.util.*;
public class train{
         private static parameter       par;
         private static data            dat;
         private static model           mod;
         private static response        resp;
         private static void error(String msg){
                System.out.println(msg);
                System.exit(1);
         private static void check(){
            if(par.f().length()==0)
                error("No filename of input vectors!");
            if(par.n()==0)
                error("No number of input vectors!");
            if(par.d()==0)
                error("No number of input variables!");
            if(par.d()>par.D())
                error("Dimension is larger than 100!");
          private static void usage(){
            System.out.println("Non-default parameters==========================");
            System.out.println("-f filename of input vectors");
            System.out.println("-n number of input vectors");
            System.out.println("-d number of input variables");
            System.out.println("Default parameters==========================");
            System.out.println("-R regularisation constant (must be positive and the default value is 0.0)");
            System.out.println("-S epsilon criterion for stopping a learning process (default value is 0.001)");
            System.out.println("-C maximum learning cycle (default value is 10000)");
                  public static void main(String[] argv){
                        if(argv.length==0){
                                System.out.println("Command line is <Java [-cp path] train parameters>");
                                usage();
                                System.exit(1);
                        if(argv.length==1 && argv[0].equals("help")==true){
                                usage();
                                System.exit(1);
                        par.nin(0); par.din(0); par.Rin(0.0); par.Cin(10000); par.Sin(0.001);
for(int i=0;i<argv.length;i++){
                                        if(argv.equals("-f")==true){
if((i+1)==argv.length)
error("miss the para");
par.fin(argv[i+1]);
i++;
else if(argv[i].equals("-d")==true){
if((i+1)==argv.length)
error("miss the para");
par.din(Integer.parseInt(argv[i+1]));
i++;
else if(argv[i].equals("-n")==true){
if((i+1)==argv.length)
error("miss the para");
par.nin(Integer.parseInt(argv[i+1]));
i++;
else if(argv[i].equals("-S")==true){
if((i+1)==argv.length)
error("miss the para");
par.Sin(Integer.parseInt(argv[i+1]));
i++;
else if(argv[i].equals("-C")==true){
if((i+1)==argv.length)
error("miss the para");
par.Cin(Integer.parseInt(argv[i+1]));
i++;
else if(argv[i].equals("-R")==true){
if((i+1)==argv.length)
error("miss the para");
par.Rin(Double.parseDouble(argv[i+1]));
i++;
else error("Unkown token");
check();
try {
dat.data();
}catch(IOException e) { System.err.println(e.toString()); }
try {
mod.model();
}catch(IOException e) { System.err.println(e.toString()); }
try {
resp.record();
}catch(IOException e){ System.err.println(e.toString()); }

String stringToRead=new String();
                for(int i=0;i<=LineToRead.length();i++){
                        StringTokenizer str = new StringTokenizer (stringToRead,"/t");
                        String[] strtemp = new String[str.countTokens()];
                                while (str.hasMoreTokens()){
                                x[n][d++] = Double.parseDouble(str.nextToken());
                                d++;
                                System.out.println(x[n][d++]);
                        stringToRead=new String();
                t[n]=Double.parseDouble(stringToRead);
                x[n][par.d()]=1.0;
        }Not sure exactly what you are trying to do above but...
You are setting your String to an empty String with "new String()" and then parsing that empty String. Eventually, you are trying to parse a double from that empty String:
t[n]=Double.parseDouble(stringToRead);Also, I cannot think of a reason to ever use "new String()" when you could just use:
String myString = "";

Pls help. 2nd post - Ipod will only synch 1/4 of the songs

Hi:
Have a 5th gen ipod. recently backed up my dell computer and wiped it clean and reinstalled the os. moved itunes back over. all music and videos are there on the computer itunes. Ipod will not synch it all. tried checking alll the boxes, etc. only synchs 1/4 of the music and none of the videos. pls help.

Yeah, same thing happened with mine, but only just recently....I used to be able to put 1000+ songs on mine, and now (suddenly) just 500.
Makes me think all these iTunes "updates' are taking up room that I don't want it to be taking...

When installing cs6 on pc it is flashing a error message that file is missing try to install adobe support advisor pls help me

pls help me for this issue

You are not addressing Adobe here in the user forums.
BOILERPLATE TEXT:
Note that because this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Urgent!!! ***Audio driver for Dell dimension 4300 running on Windows 7***?

? Hi, I just upgraded my Dell dimension 4300 which was running on Windows XP pro to Windows 7 32 bit. Everything is working fine except my sound. I cannot see my audio driver through system information or anything. So I had to open my CPU tower and found out that my sound card is Sound blaster li've model CT4780. Can anyone please tell me how do I use this card with windows 7. I don't know if it will work with Windows Vista driver and I couldn't find a driver for it. I went to dell's website and that driver didn't work, probably was not compatible with Windows 7. Now in my Device manager setting I see these drivers with question mark
- Ethernet controller
- PCI simple communication controller
- Multimedia audio controller
My bios is A04. Can anyone please help me with that. I searched everywhere possible for a solution, but couldn't find one. I will really appreciate if someone can save me.
Thank you

You need a lot more than just the non-existant driver for your sound card, you also need motherboard/chipset drivers and there aren't any for that either. You computer has the Intel 845 chipset in it,
<a rel="nofollow" target="_blank" href="http://support.dell.com/support/edocs/systems/dim4300/specs.htm#0572"]http://support.dell.com/support/edocs/systems/dim4300/specs.htm#0572[/url]
which Intel declared "end of life" a few years ago. Without a working chipset driver it doesn't matter whether you have working sound drivers or not.
In your case you would be far better off holding off on Windows 7 until such a time as you have a new computer that actual has Windows 7 support.

PLS HELP!! DELL DIMENSION L866r

Similar Messages

Maybe you are looking for