Pls Help!-'Failed to open the file'

what do you do when an error 'failed to open the file' shows
up when you try to open something...?
i'm pretty sure that i am using the same version of flash as
the one i used before to create this file.. but just on a different
mac.
please
help!!!!　(ﾉ△･｡)

yumibobcat wrote:
> what do you do when an error 'failed to open the file'
shows up when you try to
> open something...?
> i'm pretty sure that i am using the same version of
flash as the one i used
> before to create this file.. but just on a different
mac.
> please help!!!!?(????)
>
If you are using the same version the file was made in then
the only thing
left which give such error is a corrupted FLA. Beyond
recovery once fail to
open.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Similar Messages

Libre ~ Error 2038 "failed to open the file"

Good morning.
I have a Libre-eBook reader Pro.
I have downloaded and synced from Kobo to my Libre with no problems.
But when I try to download ebooks from the public library they download and open in Digital Editions just fine. I drag and drop them into the bookshelf marked Libre-eBook Reader Pro.
They show up when I turn on my ebook, but when I try to open them I get the 'failed to open the file'.
I was also getting the Error 2038 in Digital Editions when I did the drag and drop thing. I read through the forum and went through the steps recommended for the Nook ~ deleting the digital editions folder on my ebook and having Adobe reauthorize it. I no longer get the 2038 error message in Adobe, but I am still unable to open the books from the library.
I have tried deleting the books from ereader and ADE and redownloading from the Library. Didn't help.
Any other suggestions?
Thanks.
Heather

Hi Ambs101010,
Based on my research, the error can be caused by that the machine.config file is incorrect or corrupted. Please use the following steps to troubleshoot the issue and check if the error still occurs.
1. Open the machine.config in Visual Studio and check if there is any syntax errors. If syntax errors exist, modify the machine.config file directly. For more details, please review this similar
thread.
2. If the error still persists, please follow the steps to replace the machine.config file. Another alternative method is to replace the current machine.config with the machine.config file from another computer.
      a. Go to the folder C:\windows\Microsoft.NET\Framework\v2.0.50727\CONFIG
      b. Rename the file machine.config to machine.config.old
      c. Make a copy of the file machine.config.default and rename the copy to be machine.config
      d. If your Operating System is 64-bit, go to the folder C:\windows\Microsoft.NET\Framework64\v2.0.50727\CONFIG and repeat the above steps
      e. Reboot your computer
Thanks,
Lydia Zhang

'failed to open the file'

what do you do when an error 'failed to open the file' shows
up when you try to open something...?
i'm pretty sure that i am using the same version of flash as
the one i used before to create this file.. but just on a different
mac.
please
help!!!!　(ﾉ△･｡)

You will find the answer to your problem in this forum..
Database Installation

SP2-0310: Failed to open the file "coreins.sql"

Hi, when i try to install apex 3.0... on oraclexe , in the file install****.log show this error SP2-0310: Failed to open the file "coreins.sql"

You will find the answer to your problem in this forum..
Database Installation

After Effects CS3 error: file not found -43 and TIFFIO failed to open the file

Hello
I am experiencing a problem with AE CS3.
I have several TIFF sequences (with alphas) that are giving me a headache. When I import them into AE, I get an "AEGP Plugin TIFFIO: Failed to open the file" error.
I researched the forums and found that this could be related to odd formatting of the source media (my TIFF sequence). I created these TIFFs in Maya 2008 and I have imported other sequences made with Maya into AE with no issues.
Just to be sure, I created a Photoshop droplet that re-saved my TIFFs as Photoshop TIFFs with the same names.
I re-imported the new Photoshop TIFF sequences (still with alphas) into AE CS3, and I get the same error.
Any ideas? I don't know what to do next.
Thanks,
-------------S

Your USB drive may have had a weird character in it's name.
AE can't read CMYK images, that is usually the problem.
Imported images do not have to conform to any specific sizes (unless you want to go over 30,000 x 30,000 pixels.)
- Jonas Hummelstrand
http://generalspecialist.com/

Failed to open package file due to error 0x800C0006 "The system cannot locate the file in C# code.

Hi, Am facing issue when I try to run SSIS package via C# code, I have given full access to all the folder in which the package is available.
In the below line am getting error,
using Microsoft.SqlServer.DTS.Runtime;
Application app=new Application();
Package package=null;
package=app.LoadPackage("PackageFullPath",null) --error line
Failed to open package file "C:\SSIS\Package.dtsx" due to error 0x800C0006 "The system
cannot locate the object specified.". This occurs when loading a
package and the file cannot be opened or loaded correctly into the XML document

Are you trying to run this code from job or something? Check if account executing the package has access to the path. Also check if path value passed is correct. If its a remote system path pass it in UNC format (ie //machine/...)
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

'failed to open the PDF file' error - Indesign CS3 on Mac

Hi,
Whenever I place PDFs that were created by any other app besides indesign or Illustrator I get a 'failed to open the PDF file' error, previously these PDFs were fine to place but all of a sudden they're not... Help?
I'm not too keen on opening in Illustrator and resaving for the rest of the foreseeable future either...
Jared

Thanks for the reminder, Scott.
http://indesignsecrets.com/failed-to-open-pdf-error-show-options-to-fix-it.php
Bob

Content generation error. Failed to open the InDesign file.

Hey all -
In importing an article to a folio, I just received this error:
"Content generation error.
Failed to open the InDesign file. Please confirm the file can be opened in InDesign."
The file is open right now in InDesign. I can close it and reopen it with no errors.
I've tried resaving the article to a new file. No help.
I tried creating a new folio and importing the article there. No help.
All links are good. It's a simple file with images, a scrolling pane, and some buttons that link to other articles.
Anyone else run into this problem? Any solutions?
Thanks!

Im getting this error also....?
Want to avoid inporting each artical on at a time. Need to import multiple articals at once.
Thanks.

I just downloaded Digital Editions to use an e-book I purchased. When I try to open the file it opens in Adobe Reader and I get an error message. Please help

please help I downloaded Digital Editions to use e-book and when I got to open I get an error message

It says file could not be opened because it was either not a supported type or it was damaged. I have already had the file resent and in talking to the American Medical Association (purchased from their site) it appears when I go to open the file it is in Adobe Reader and I do not see an option to move it to Adobe Digital Editions,
Kathy Harlan
<mailto:[email protected]> [email protected]
Cell: 214-850-6427

HT4796 I have made a file using the Pages app.I mailed it to a friend.When she tried opening the same file on her pc at home , It did not open.Please help me as to how to open the file in the Microsoft word format on her pc.

I have made a file using the Pages app.I mailed it to a friend.When she tried opening the same file on her pc at home , It did not open.Please help me as to how to open the file in the Microsoft word format on her pc.

Send it as a PDF.

Creation of Recovery Disks - 'Failed to open the following file" Error

Greetings All,
I am in the process of trying to create a Recovery Disk Set for a Client's *Satellite L300 - PSLB8A-07U004*.
While the application opens and begins the creation of the disk set, it has, three times now, failed at with the error message of *"Failed to open the following file. D:\!V5_01_07.VRP (Error Code: 020123-F1-00000000)".*
I did attempt this process the first time while the all the client's data was still loaded.
I have now done a 'Restore to 'Out of the box experience' because I thought one of those files might be the cause but, alas, the error was repeated.
Obviously this is irritating (to say the least).
I have NOT made any change to the layout or sizing of partitions.'
Any thoughts?
rampant_rhino

Thank you both for your responses.
You were on the right track.
I was attempting to use a 'dodgy' brand (SKY-Silver) of DVD-R for the creation of the disk set.
On changing over to TDK disks, the problem did NOT repeat.
Strangely enough, the dodgy ones worked great for creating copies of the set once it was completed.
Again, thanks to you both.

I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?

I have a MacBook pro version 10.6.7 with snow leopard. After an scheduled software upgrade I could not open Quicken (It said it could not open the files). Now I can only open it if I have my external drive on. Can you help?
All the information that I had input on Quicken is gone. I have to have the external hard drive that I use to back up to be able to use quicken now. It is as if it was erased from the laptop hardrive

Try repairing permissions. My favorite way is with a utility called AppleJack. Info and download here. It's free. It only works when you boot in Single User Mode. When restarting or booting, hold down the Command key and S keys.
You will get a very different startup screen that looks like the Terminal app has hijacked the screen. Just let the lines of text scroll by. When that happens you will get a text entry prompt. Type in "AppleJack" without the quotation marks.
A DOS looking menu will appear. Choose 1 or d to run Disk Repair. If you get a message that Disk Repair found and corrected errors, run it again. Repeat until you get the "your disk appears to be ok" message. This rarely happens with my experience, though. This does the same thing as as booting from an external drive and running Disk Utility's repair. Only, no external drive is required!
Next, choose 2 or p to repair disk permissions. This will take a little while. AppleJack warns that it will take up to an half hour to run repair permissions. It'n never taken more than about ten minutes for my MacBook Pro.
As permissions are repaired, you will see each repair scroll on the screen. When done, the menu returns, choose q to quit. Then at the prompt, enter "exit" without the quotes. Your MacBook Pro should restart into Mac OS normally after this.
Hope this helps.

How can I install the latest Camera Raw? I've just bought a Nikon D610 and am shooting in RAW but my CS5.1 won't open the files. I'm running CR version 6.7.0.339 but I can't install more up to date one as only running Windows Vista. Please help!

I also tried to install the latest DNG converter and that looks to have worked but not quite sure what's happened as I still can't open the files. Thanks in advance for any help.

You can purchase an upgrade, but the only options available as a qualifying previous product are CS5 and CS5 Extended and Acrobat X Suite. It isn't entirely clear if CS5 also includes CS5.1 or not, so I'd suggest using the Chat Now button over at the side to clarify.
To get to this listing, you can go to www.adobe.com then click Search and type in Photoshop CS6 then click the Buy button next to Photoshop CS6 in the results Creative Suite 6 then edit your cart to make it an upgrade:
You can also choose the Extended version of PS CS6 which is more money and can additionally do things with video and sequences of images and maybe 3D, although I'm not exactly sure at this point since I already have PS-CS6 Extended as part of my CC Photography Plan PS-CC+LR for $10/month.

Help please I can not openening because: Error opening the document, Acrobat can not open the file while printing another document

Help, I ca not opening the file, beacause the mac says Error opening the document, Acrobat can not open the while printing another document

Thank you very much for your replies Taggert_77 & swmtgoet_x :D
Taggert77_: I have never used NetBeans. I only installed it in the bundle as I had read on another post that somehow installing the bundle magically helped another user with the same problem (he didn't know why it worked after that either).
Before XP SP3 I was able to execute .jar file through cmd prompt. Now I am not.
This file is executable, grab it and you will see. Here is a screen shot (program in front is FlashFXP, behind is the cmd prompt and what should happen):http://www.freeimagehosting.net/uploads/53273b4ddf.jpg
swmtgoetx_: I only did the other cmd's to try to make it spit out something, anything lol :D
The proper cmd is simply: java -jar soht-client-0.6.2.jar
I did give your cmd a try, and it produced nothing :( (just like the other correct cmds)
java -client -jar soht-client-0.6.2.jar soht.properties
Thank you again...the mystery remains
PS. If you do a search for this you'll find an amazing amount of XP SP3 users with the same problem and no solution posted that I could find except one chap that did the unistall install order that I did above).

Failed to open the PDF file

I have to place a large number of PDF files. Sometimes I get an error: "Failed to open the PDF file". In the InDesign Forum I found that this also happens in the GUI from time to time and that the workaround is to turn on the Show Import Options. But this is obviously not an option for me.
Is there any alternative?
Thank you, Ralf

When you retry, is it always the same PDF?
Otherwise I'd play around like
- catch the error
- perform some potential cleanup of resources (files, memory), e.g. SaveAs, or a Close-Reopen cycle
- retry the same PDF
Dirk

Pls Help!-'Failed to open the file'

Similar Messages

Maybe you are looking for