Pls help for the installation

Hi,
I am having problem in installing SAP netweaver 2004 on my windows xp.
when i try to run the setup,the following error occur to prevent me from futher installing :
An error occur during the installation of components SAP Netweaver sneak preview 04 support release 1> Migration - target system installation .
The following is the log file:
Error 5 (Zugriff verweigert
) in execution of a 'RegOpenKeyEx' function, line (67), with parameter (SYSTEM\CurrentControlSet\Services\McAfeeFramework).
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\McAfeeFramework' does not exist on the 'localhost' host.
The step setDefaults with step key J2EE_SystemCopy_OneHost|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|setDefaults was executed with status ERROR.
Could anyone pls give me a help.Thanx

Hi,
You can't install in xp; check Note 722273; this note talks about the configuration. very helpfull but you need to meet the minimum SAP requirement. Read any instllation guide for hardware reqirement.
Thanks,
Plz points for helpfull tips

Similar Messages

Need help for the installation of one key theater and the improper working of touchpad

hi can anybody tell me how can i install one key theater in g560 laptop running on win 7 32 bit OS as me trying to install it but it doesnt work.
How to solve the touchpad issue in g560 as sometimes the touchpad stops funtioning or not sensing the finger movement.

Hi and Welcome to the Community!
I'm not sure, from your description, exactly what you are looking for. "Username" and "E-mail"? Are you perhaps looking for the ability to enter a "reply-to" email address that is different from the actual email address of the account you are sending from? If so, that feature is indeed not presently available in BB10. Among other features, it may be one that many hope are added to the BB10 platform with future OS releases. But, for now, it is what it is.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Help for the installation of Oracle8i (personal) on win98

Hi,
I am a beginner in Oracle. Could someone tell me how I should fill the fields for Global Database Name and SID? In fact, I have no idea of that. (Oracle 8i personal edition for www.oracle.com.
Thanks!
Chen

Hi Dan,
I am installing the Oracle Service Registry 10.1.3 (standalone registry) and stuck for this problem:
"EXCEPTION: ORA-01460: unimplemented or unreasonable conversion requested"
Exception registered when importing the file operationalTM.xml.
Thank you for any help!

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

Adobe - Lightroom : For Macintosh
Hal

F4 help for the batch field in VL02N transaction

We have upgraded our system from 4.6 to ecc 6.0 .In 4.6 the f4 help for the batch had " Batch selection via plant/Material/Storage location/Batch " which is not there in ECC 6.0.
Please tell us the procedure to add in the existing search help H_MCHA in ECC 6.0
Thanks
Aruna

Hi Aruna.
Create ur own search help using se11 tcode for required fields.
Thanks & Regards,
Kiran.
Plz give rewards if and only if it is helpfull.

F4 help for the field requisitioner in ME51n

hi friends,
i got a requirement to give F4 help for the filed requisitioner in Me51N which will be in item level .
can any one give me the exit, badi, enhancement-point for this.
thanks and regards,
venkat.

not answered

F4 HELP for the field

HI all,
in the report selection screen i have one field for which F4 HELP doesnt exits, even in the table for that field F4 HELP is not there but the user requests me to get the F4 HELP for that field in the selection screen .
please help how to get F4 HELP for the field
thanks in advance.

The following are the options for F4 help
Code:
PARAMETERS: p_ccgrp LIKE rkpln-ksgru. "Cost Center Group
*Input help for Cost Center Group
AT SELECTION-SCREEN ON VALUE-REQUEST   FOR p_ccgrp.
TYPES: BEGIN OF ty_ccenter_group,
setname TYPE setnamenew,
descript TYPE settext,
END OF ty_ccenter_group.
DATA: it_ccenter_group TYPE TABLE OF ty_ccenter_group.
CLEAR it_ccenter_group.
SELECT a~setname
b~descript
INTO TABLE it_ccenter_group
FROM setheader AS a INNER JOIN
setheadert AS b ON
asubclass EQ bsubclass AND
asetname EQ bsetname
WHERE a~setclass EQ '0101' AND
b~langu EQ sy-langu.
CALL FUNCTION
'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
ret field        = 'SETNAME'
dynpprog     = v_repid
dynpnr         =    SY-DYNR
dynprofield = 'P_CCGRP'
value_org    = 'S'
TABLES
value_tab   = it_ccenter_group.
F4IF_FIELD_VALUE_REQUEST:
This FM is used to display value help or input from ABAP dictionary. We have to pass the name of the structure or table (TABNAME) along with the field name (FIELDNAME). The selection can be returned to the specified screen field if three
parameters DYNPNR, DYNPPROG, DYNPROFIELD are also specified or to a table if RETRN_TAB is specified.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
TABNAME = table/structure
FIELDNAME = 'field name'
DYNPPROG = SY-CPROG
DYNPNR = SY-DYNR
DYNPROFIELD = 'screen field'
IMPORTING
RETURN_TAB = table of type DYNPREAD
Getting F4 help based on other field .
Suppose if there are 2 fields on selection screen user name and Purchasing Document and the case is getting values of Purchasing Document Number based on user name
Code:
TYPES:   BEGIN OF ty_match_nast,
                objky TYPE na_objkey,
                END OF ty_match_nast.
Data: it_match_nast   TYPE STANDARD TABLE OF ty_match_nast.
Data: it_dypr_val   TYPE STANDARD TABLE OF dynpread.
DATA: wa_dypr_val TYPE dynpread.
DATA: it_return TYPE STANDARD TABLE OF ddshretval.
Case when only username value is entered.
       SELECT objky
        FROM   nast
        INTO TABLE it_match_nast
         WHERE kappl = c_ef
         AND   kschl = c_neu
         AND   usnam = wa_dypr_val-fieldvalue.
      ENDIF.
*Read User name on selection screen field value
CLEAR wa_dypr_val.
REFRESH it_dypr_val.
wa_dypr_val-fieldname = 'P_UNAME'.      "User name
APPEND wa_dypr_val TO it_dypr_val.
*FM to get the value
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname             = sy-repid
      dynumb             = sy-dynnr
      translate_to_upper = 'X'
    TABLES
      dynpfields         = it_dypr_val_h.
*Pass the values to f4 table
   CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield     = u2018OBJKY'
        dynpprog    = sy-repid
        dynpnr      = sy-dynnr
        dynprofield = 'P_EBELN'
        value_org   = 'P'
     TABLES
        value_tab   = it_match_nast
        return_tab = it_return.

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ?

I'm trying to download the trial version of Adobe Illustrator. An error message says that the OS does not meet the minimum system requirements for the installer. 10.6.0 is the minimum required for installation. How do I get my mac to be a 10.6.0 ? Right now I have a 10.5.8 is there a way to upgrade or something?

Buy the Snow Leopard retail installer (http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA).
That will take you to 10.6.3.
If required you can then use the combo updater to get to the latest version, 10.6.8 (http://support.apple.com/kb/DL1399)
SL system reqmts;

How to display Help for the message in our program

Hi Experts,
Do any one know how to display the HELP for the Message in our ABAP program? Just like the user click the Long Text button in SE91.Do we have any function modules or Class method to do that? Thanks in advance.
Joe

Hi Joe,
While creating a message class in se93, theres a button (documentation) on the application tool bar. Click on that and you will be lead to a text editor where you can fill in the necessary documentation for the message you have created.

Need help for the $200 promo rebate for trade-in of I Phone 4

Need help for the $200 promo rebate for trade-in of I Phone 4. Unable to preregister when I ordered the new 6 in September. Now can not contact VZW recycle program regarding.

When I ordered my phone on Sept. 13th in a Verizon store, I had to ask the salesman how I went about getting the $200 rebate. He said shipping materials would come with the new phones. When I received the confirmation e-mail of my order, it contained a link for the rebate. Fortunately I clicked on the link, filled out the form online, and received the packing materials to send my phone in shortly after. My phones came in on Oct. 14th and I sent 3 of them back. So far I have received a gift card for $200 for 2 of the phones; the other is showing not received. I don't know what your situation is, but I think the promotion ended Oct. 15th. If I had listened to the salesman I think I would be out of luck as well. I hope I am wrong for your sake.

Issue with F4 help for the variables for the 0CALWEEK and 0CALMONTH

We have custom IOs which refers to 0CALWEEK and 0CALMONTH.In the report we have variables on the custom IOs.For these variables F4 help does not giving any values .I tested with 0CALWEEK also. For the 0CALWEEK also F4 help does not working..Please help me on this issue.The variable I haveused d to test with 0CALWEEK is 0S_CWEEK.
Edited by: Sudhakar Are on Jul 6, 2010 4:17 PM

Hi Pramod,
I don't know how it is done in infoset. But if you have a context node and attribute for the field which is displayed in the view, create a custom dictionary search help for the field you want. Design the search help as per your requirements (what fields to be displayed etc..).
In the context attribute of that field property, select 'Dictionary search help' in the Input help mode. Enter the name of your custom search help here.
Thanks & Regards,
Satheesh.

F4 help for the screen fields in module pool program

Hi All,
I have a requirement that, i want to provide F4 help for the 2 fields in module pool program. the fields are document number and fiscal year from rbkp table.
i could provide search help for two fields.
but how to select matching fiscal year for that document number.
problem: i am getting fiscal year as first four digits of document number.
please help me to solve this problem.
Thanks & Regards,
Namratha.V

Hi,
If your requirement is after selecting the document no from f4 help then the corresponding year should be updated in the document year field then use FM --> DYNP_VALUES_UPDATE
In this function module pass the screen no program & field for which u want to update value

Providing F4 help for the same field on selection screen

Hello Experts,
My requirement is :
There are 2 radio buttons and a parameter "p_file" on my selection scree.
1. rb_appl
2. rb_pres
If the radio button rb_appl = 'X', I need to place the logic of F4 help of application server for the field p_file. Else if the rb_pres = 'X', then I need to place the logic of F4 help of presentation server for the same field p_file.
I have written the code in the below manner
PARAMETERS: rb_appl RADIOBUTTON GROUP rad DEFAULT 'X',
                         rb_pres RADIOBUTTON GROUP rad ,
                         p_file   TYPE ibipparms-path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
IF rb_appl = 'X'.
      PERFORM f_applictn_server_filenm.
ELSEIF rb_pres = 'X'.
    PERFORM f_presentation_filenm.
ENDIF.
But I am getting the F4 help for only the radio button for which i have placed the default value in the parameters.
So please let me know how to define the F4 help for the same field based on the radio buttons.

Hi,
You can acheive the same by the addition of [USER-COMMAND fcode].
RADIOBUTTON GROUP group [USER-COMMAND fcode] - The addition USER-COMMAND can be used to assign a function code fcode to the first parameter in a radio button group. The function code fcode must be specified directly, and have a maximum length of 20 characters. When the user selects any radio button of the radio button group on the selection screen, the runtime environment triggers the event AT SELECTION-SCREEN and transfers the function code fcode to the component ucomm of the interface work area sscrfields.
So you code should be altered as
PARAMETERS: rb_appl RADIOBUTTON GROUP rad
                     USER-COMMAND radclick    "Addition which you have to make.
                     DEFAULT 'X',
            rb_pres RADIOBUTTON GROUP rad ,
            p_file   TYPE ibipparms-path.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
IF rb_appl = 'X'.
    PERFORM f_applictn_server_filenm.
ELSEIF rb_pres = 'X'.
    PERFORM f_presentation_filenm.
ENDIF.
Thanks & Regards,
Harish

How to find the search help for the parameters stmt in a report

hi
how to find the search help for the parameters stmt in a report , that is using which addition to the parameters statement

I am not sure if I understood the question,but if you meant how to attach a search help to parameter for which a default search help is not available,you can do that by using addition "Matchcode Object"
Parameter: a type i matchcode object 'Search Help Name'
Search Help name should be in single quotes.
Regards,
Anubhav.
P.S: Award Points if useful.

Audio cable help for the new AppleTV.

Audio cable help for the new AppleTV.
Currently I have an original AppleTV with audio RCA plugs to mini plug into my BOSE speakers.
The 2nd Gen AppleTv has a Toslink input. I've looked at cables of Toslink to optical mini. Will this cable work? The optical mini part I'm not sure of what it is.
Thanks so much. The monitor I use doesn't have speakers.
This is the cable I see at Amazon
http://www.amazon.com/gp/product/B0002JFN1K/ref=ordcartshr?ie=UTF8&m=ATVPDKIKX0DER
Message was edited by: musicmaker

If I understand your question correctly, you want to connect your Apple TV2 to your Bose system using a mini plug.
You will need an optical to digital coax RCA converter (find it on Ebay about $15), then you can connect your mini cable. Here is a link to one I recently bought on Ebay: http://fwd4.me/nrQ

Pls help for the installation

Similar Messages

Maybe you are looking for