Pls, help. How the bidder licenses are considered?

Hi,
I'd like to know if someone have experience or documentation about how the bidder licenses are counted in SRM.
I mean in one customer are worried about they want to invite a lot of vendors to participate in several bid invitations, they argue that they are going to work with the winners, offering other services but they would prefer don't consume a license in bidder they aren't going to work with. So they would prefer lock them.
Would this bidders be counted in the number of licenses?
Someone know where I can get information about this matter. I know that finally they have to speak with the account manager but I suppose that what kind of licenses and how we can distinguish them should be accesible for us.
Thx

Hi
Please go through this ->
Bidding Engine comprises normal bidding and live auction. They are a part of SRM and you don't require separate license for that. In term of licences, Bidding Engine is priced separately as an engine.
But in term of solution, it is already there & available in the system:
- one transaction for the purchaser
- one transaction for the supplie
- Live Auction Java part
There is nothing special related to licence to be activated in SRM to use Bidding Engine.
Related link ->
Re: CCM 2.0 Vs SRM-MDM Catalog?
Re: How to find Bidding engine installed.....???
Re: Bidding Engine Licence
Hope this will help. Do let me know.
Regards
- Atul

Similar Messages

HT201359 Why i have been billed six times for the same item? Pls help how to refund..

Why i have been billed six times for the same item? Pls help how to refund..

Did you change your card details on your account a number of times when trying to purchase the item, and five of them are temporary store holding charges : http://support.apple.com/kb/HT3702 ?
If they are all 'proper' charges then try the 'report a problem' link to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Hi, since i updated my iphone5 to 7.1 version,i found the battery easy run out,pls help how to back to 7.0.2 version,thanks

since i updated my iphone5 to 7.1 version,i found the battery easy run out,pls help how to back to 7.0.2 version,thanks

Downgrading of iOS is not supported by Apple.
However, See these steps for troubleshooting battery or charging issues.

Pls help+how 2 extend warranty online 4 my iphone in india

pls help+how 2 extend warranty online 4 my iphone in india

If you area able to purchase Apple Care, then you could extend it one additional year, but you could not extend it 2 years. Check with Apple for your location to see if Apple Care can be purchased in your location. You would have had to purchase the device new from Apple or an authorized Apple reseller.

My iphone5 was stolen.. pls help how to deactivate it? badly need your help..

My iphone5 was stolen.. i was slept on the bus, pls help how to deactivate it? badly need your help.. its only two months on me

What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

Pls help - How can I add a typekit font to muse?

As Muse doesn't come with all typekit fonts already included in the dropdown list of webfonts, I'd like to know how I can add a typekit font to the dropdown menu so I can use it for my website. I have Adobe creative cloud membership.
I've searched the whole of the web and can't find anything about this at all - only about adding one of the existing muse typekit fonts which I already know how to do.
Why doesn't Adobe include all typekit fonts with Muse when you're already a full creative cloud subscriber?

Done!
Date: Thu, 20 Dec 2012 03:13:17 -0700
From: [email protected]
To: [email protected]
Subject: Pls help - How can I add a typekit font to muse?
    Re: Pls help - How can I add a typekit font to muse?
    created by morgan_in_london in Help with using Adobe Muse - View the full discussion
You're very welcome - can I be cheeky and ask for a "correct answer" to be noted? :^D
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4935814#4935814
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4935814#4935814
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4935814#4935814. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Help with using Adobe Muse by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item

Dear Experts:
could you please share with me the knowledge for below topic:
How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item, because these three objects use three different pricing procedures, and different condition type.
how did the condition type of service entry sheet know to copy the value of whcih condition type in the pricing procedure of shipment cost document?
Is this SAP standard function OR there need an enhancement to do that?
I didn’t find related condition value copy setting in background, could you please share related setting with me? Thank you very much for your kind help!
Best regards,
Andy

Hi, Gopi,
Glad to see your feedback, but i still have question on your feedback:
which condition type in the pricing procedure of service entry sheet should know to capture the net value of shipment cost doc? becasue there are so many condition types,
And i have checked the corresponding condition type (PRSX) of service entry sheet pricing procedure in my SAP system, this is a self-defined condition type, but NO any calculation routine maintained for the condition type (PRSX), how did the condition type (PRSX) know to copy the total cost of shipment cost document?
Below is the example and another question:
what the relationship between the pricing procedures at service PO item level and service line item level?
1. The freight cost in shipment cost document—including used condition type and pricing procedure
The pricing procedure of shipment cost document
2. The freight cost in service entry sheet—including used condition type and pricing procedure
The pricing procedure of service entry sheet--the pricing procedure at service line item level
3. The freight cost in service PO item—including used condition type and pricing procedure:

My calender is in unknown language pls help how to change back to normal language?

my calender is in unknown language pls help how to change back to normal language?

I do not know this tool can you be specific, just curious.
T the Op the easiest way of reseting your preferences is the hold the command option shift keys down as Illustrator launches you have to click on the Illustrator icon and quickly hold these keys down.
Oh yes on the PCit is control alt shift.

HT4623 I cannot see sw update button in general section,pls help how to update iOS in my iPad 2

Hi I want to upgrade my iOS to 5 in my ipad2 but I cannot see nay upgrade button in the setting section.pls help how to upgrade my iOS now

The Settings > General > Software Update option only appears when you have iOS 5+ installed, as you have iOS 4 you can only update to iOS 7 (that is the only version that you can update to) via your computer's iTunes, as described half-way down the page that you posted from. You will need the current version of iTunes on your computer : http://www.apple.com/itunes/download/
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Devices > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad via File > Devices > Back Up
Then start the update by selecting the iPad on the left-hand sidebar, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972
If you do update you can't then uninstall it

My IPOD menus suddenly appear in Japanese or Chinese and are impossible to understand for me who is european. Has somebody else had this problem? Please help? The song titles are still in the language they were entered though. /Jane

My IPOD menus suddenly appear in Japanese or Chinese and are impossible to understand for me who is european. Has somebody else had this problem? Please help? The song titles are still in the language they were entered though. /Jane

Fingers crossed, the following document might be of some assistance:
iPod: Changing the display language

How the Element panels are mapped in SpeedGrade CC

Hi,
We've just posted some documents on our website Support page that provide details of how the Element panels are mapped in SpeedGrade CC.
See http://www.tangentwave.co.uk/support/documents/ElementSpeedGradePanelMaps.zip
The only part that isn't covered is the Stereo3D controls.
Don't forget you can also make up a keypress map so you can also control Premier
For details on how to do this see http://www.tangentwave.co.uk/support/documents/KeypressAppQuickGuide.pdf
Cheers,
Chris

That is what ColorMatch2 is there for ... to match to a snapshot you've got in the snapshot listing. Check the documentation for this, as it is something that is explained there. The process is to click on the camera/snapshot icon lower right of the program monitor panel ..
... which brings up a twin-view monitor and the most recent snapshots you've made within Sg. Pick one, or navigate to a different snapshot, and using the "Reference" right-side set of three controls, choose your dark, light, & mid value. Then do the same using the left-side set of three controls from the current spot in the playhead of the footage you're grading. Sg then tries to map everything else out accordingly.
Neil

Hi want to upgrade my software to 7.1.1 pls help how i have do it

hi want to upgrade my software to 7.1.1 pls help how to do it

The following has instructions on how to update: http://support.apple.com/kb/ht4623

Pls help how to check the condition in java server faces.....???

Hi All
I have strucked with code pls help....
How can i check the codition in java server faces.....?
like in my Application when user provides the in put like some state name in the next page i have to display some url for that state .......if he provide some other state name it will be different url .....pls help me how can i do that,,,,,,???
thanks in advance..

There are certainly ways to do that. E.g. using the rendered attribute, using conditional statements in EL, using a specialized getter for that (lazily loaded if necessary), etcetera. But your functional requirement is unclear, so I can't go in detail with that.
In the future, please try to write normal English sentences. Don't write like SMS talk and save the periods and commas. The more effort you put in your question, the more chance you will be taken for serious and the more effort others will post in their answers.
Also, in the future, JSF related questions should be posted in the JSF forum.
Edited by: BalusC on 12-aug-2008 7:47

HT1766 please help...we updated ipod2 4.1 to IOS 5.1 at itunes...after it was finished only the contacts were restored...not the music & videos...we found the backed up data in the pc(windows 7)after entering %appdata%..pls help how to restore..thanks!God

please help...we updated ipod2 4.1 to IOS 5.1 at itunes...after it was finished only the contacts were restored...not the music & videos...iwe found the backed up data in the pc(windows 7)after entering %appdata%..pls help on how to restore...we will appreciate it very much....thanks! God bless!

The iPod backup that iTunes makes does not include synced media like app, music and videos. Thus, you wll have to resync those back to your iPod.
If necessary you can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How the bidder can see the invitation to auction?

Hi Experts,
I am bit new to SAP SRM. I have created an auction for an item and added two bidders for the auction.
I have published the auction.
Now, I have logged on to the system as one of the bidder. How I can see the invitation to auction?
Could you please help me? I had selected the mail communication for the bidders in the auction.
Regards,
Ranjan

Hi,
http://help.sap.com/saphelp_srm50/helpdata/en/67/c3833cfa3dbc2ce10000000a114027/frameset.htm
Go through this link could be helpful.
Thanks
prasad.s

Pls, help. How the bidder licenses are considered?

Similar Messages

Maybe you are looking for