Pls help... i cant turn on my iphone4 after i upgrade to ios7
pls help... i cant turn on my iphone4 after i upgrade to ios7
Reset the phone: hold down power and home buttons together until the Apple logo is displayed. No data will be lost.
Similar Messages
-
Hi support team, I'm using iphone4, After i upgraded my ios7.0.2 i'm facing issues.
- Unable to view the incoming calls.
- mobile hangingThis is not the "support team". These are user to user forums. You are not addresssing Apple's "support team" by posting here.
Which of the troubhleshooting steps listed in the iOS 7 user guide have you tried? Have you tried a reset? -
Help i cant turn my ipad on and it had planty of charge???? Kate
help i cant turn my ipad on and it had planty of charge???? Kate
Thank you so much, all good now, not much of a tech head this end. had to pull out book to find out which is the sleep and home buttons...lol
Love my ipad ! -
How come I can't customize ringtones on my iphone4 after the upgrade of the latest itune?
How come I can't customize ringtone on my iphone4 after the upgrade of itunes latest version? I seem to be putting it in the right section and is showing up under my device but is not showing up on my iphone. Can anyone help? And yes, my ringtone are 30sec or less but it doesn'e show up on my phone in the ringtone section.
Is ringtones under 35 secs? If over then it will not work.
-
I cant hear Voice during call after i upgrade 7.1 i use iPhone 4
I cant hear Voice during call after i upgrade 7.1 i use iPhone 4
Hey there Goesdhar,
It sounds like you are not getting sounds from your receiver on your phone. I recommend the troubleshooting from the followint article named:
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Increase the volume during the call.
Make sure nothing is blocking the receiver. If you're using a protective case or display film, remove it and try again.
Make sure nothing is plugged into the headphone jack or the dock connector.
Check the receiver opening to see if it is clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush.
Try another location with better signal. If the audio issue happens only when on a call, it could be due to the location.
If the iPhone is paired with a Bluetooth headset or a car kit, try turning off Bluetooth on your device. Learn more about troubleshooting Bluetooth connections.
Restart the iPhone.
Make sure your device is up to date.
If the issue is not resolved after restoring the iPhone software, contact Apple Support.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Cant open my ipad 2 after i upgrade it to IOS 7.1 what will i do
i cant open my ipad 2 after i upgrade it in IOS 7.1 what should i doipa
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Hi! I tried to instal whatsapp thro istore and it displayed the terms and conditions page. But the problem is there is no save or agree button. I am stuck in this page. I need help. This is a iphone5. This was after I upgraded to ios7.
It is hardly Apple's fault that Epson can't/won't update their driver, but at least Epson suggest that you use the Gutenprint driver, which in any case is far better that what Epson offer.
You can get it here:
http://gimp-print.sourceforge.net/
You can download the latest version from here:
http://sourceforge.net/projects/gimp-print/
Have you downloaded the recent Apple update to Epson drivers?
http://support.apple.com/kb/DL1398 -
Plss help..cant turn on my ipone4...!!!
pls help me...cant turn on my ipone4..the phone just b boot n turn off.i open back n just logo comeup.i do hold down the sleep button along with the home button until the logo comeup again, then ilet go.but just logo n blackbackground.until now!! wat shout i do... plsss help me...plsss..
Do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wati for the phone to boot back up.
-
HELP! Cant turn on 8130....
HELP!! I cant turn on my 8130!!! I purchased a new BB, and now want to retrieve my contact list off my 8130. Is it possible????? Can anyone help me out with this matter?
Can you be a little more specific? What happened to the device? Even if your device is salvagable, your data is most likely gone.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you! -
Hi everyone,
Could someone help me. I charged my iphone4s and went to sleep. When I woke up I used it to take pictures but I noticed the camera shake so I decided to turn it off. When I turn it on I can't turn it on. When I tried charging it and turn it on it just vibrate but it won't turn on. Please help.RESET DEVICE
Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost). -
Pls Help. Sounds and ringtones wont open after software update
Hi Im using BB Bold 9700 and after I did the update to 5.0.0.862 I was unable to open the sounds and ringtones to change my SMS tonw, pls help I already rebooted my device and still unable to open that menu..
Hello Crimson_Night and welcome to the BlackBerry Support Community Forums.
If you go into the Media player, are you able to hear the tones?
Try clearing out the Sounds/Profiles database as shown in KB10167 and reconfigure them.
Let me know how you make out.
Thanks! And have a great day
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)! -
i cannot download the abode falsh plug in app. nor install from the apple site or adobe site. it does not even download. at all. pls help
Do you have the Java runtime installed? The following Adobe knowledge base article may help with the issues you're having on OS X 10.7.5
http://helpx.adobe.com/x-productkb/global/known-issues-mac-os-10.html -
Pls help - i cant access nokia messaging nokia 630...
Hello there i have been trying everything to get nokia messaging on my mobile phone (nokia 6303) but i just cant seem to download it. It says it is pre-installed on the device but its not and i cant even down load it from the ovi store because it doesnt show up :s I live in england where the phone was purchased (Argos)
Any ideas?
DanielHave you got the 6303 or 6303i. The 6303i has Nokia Messaging built in I think.
If it's the 6303i you won't see an app called Nokia Messaging on the phone though, you just go to the Email and set up an email account. If it's compatible with NM then it will use the NM service.
Otherwise, I'm not sure you can get Nokia Messaging as a download for S40 phones. Though you could try updating the firmware and see if it adds it.
E72-1 UK CV 052.005 -
I cant turn on my iphone after reboot? what to do? please help.
I tried to reboot my iPhone to restore my previous back ups, but something came up, my iphone suddenly turned off on wont turn anyway. Its been off for 3 weeks. I tried everything i see in the internet but none of these works. PLEASE HELP1
Jung Ah Hyuk wrote:
Its been off for 3 weeks.
The battery will now be flat... using the supplied Charger and Cable... Connect to the Mains Power for at least an hour.
If the Phone does not automatically start... Disconnect from the Mains Power and Unplug the Cable...
Then...
Try a Reset
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
Pls pls help- i cant get itunes on my comp
my comp wont put itunes on all i get is 162: failed to complete installation, i have disabled norton anti virus and tried everything and im rubbish on comps. it loads up (itunes)i get an icon on the desktop but when i double click on it an agreemet flashes up and thats it. I have tried uninstalling it and trying again and downlaoding it from the net but nothing
i really need help its driving me mad
Thanks in advanceHang on...
You can only authorise the songs you purchase from the iTunes Store to play on five computers.
You can download and install iTunes (the iTunes programme) onto as many computers as you wish.
Two different things.
Assuming therefore, that your problem is that you have authorised five computers, but now no longer have some of them, you need to de-authorise all your computers and then re-authorise the computers you still have.
To de-authorise your computers, go to your account in the iTunes Store and look for the Deauthorise All button.
Maybe you are looking for
-
How to view files uploaded in a directory through jsf
Please tell how to view the files in a directory using adf .Using jdeveloper 10g
-
Lost all contact after sync contacts.!!
guys, Help!! i lost my contact after sync my contact. Do not know where my contact goes and do not know how to put it back my contact from my itunes. iphone 3GS 10.6+ itunes no using iclouds
-
Webmaster: How to stop unwanted forum emails - Attn: Webmaster
Dear Webmaster, I started a discussion on your adobe forum on Oct 4, 2010 5:53 PM titled Unable to open PDF file in browser using Reader 9 with IE8 in Adobe Reader at URL http://forums.adobe.com/thread/733688?tstart=0. Since then, I have received o
-
"Assign Collection Groups to Segment" - Disable Default Group Option.
Hi, I am using the SAP FSCM Collections Management module. I have a requirement in the following: "Assign Collection Groups to Segment" I don't want to have a Default Group in a particular segment. The Default Group is a standard SAP feature. I would
-
unit: 16gb ipad mini adapter: 12w wall working up until last night, until this morning.... issue: 1. pc not detecting the unit, but if turned off and connected, the unit boots ups (sign that it reads) 2. if using the adapter (12w) displays "not charg