PLS HELP I NEED NET!

Hello. Im not much of a computer person. I moved from Vancouver to calgary. My laptop was working fine with my router before I moved. I moved into a house that already had cable internet so I thought I go just plug my router in and go! Which has not been the case. I see my network name that i initially set up, but when i go to use it, all it ever says is "Aquiring network address" and won't connect. I always have to take a neighbors access...which is now locked. Can someone pleae help me!! Much appreciated....janey

connect the computer to the router's port 1.... open IE and go to http://192.168.1.1 . Logon using the password "admin"..however, if u had changed the password before , u need to use that password....once on the set up page, go to the Mac Address Clone subtab , enable it and click clone your pc's mac ... save the settings and do a power cycle...
go to the wireless tab , change the channel - 1 or 11 ....go to "advanced wireless settings" subtab and change the beacon interval - 50 , RTS and fragmentation threshold - 2304 ..
check whether the internet works now....

Similar Messages

I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, just one big clip,,,pls help, i need to make some changes to the project..thanx

I shared my project and saved it as .mov but when i reopen the fcp the project is one big clip, and now i cant re-edit the video, cant see all the clips, text's, effects, etc..... just one big clip,,,pls help, i need to make some changes to the project..thanx

Hi Stephen, thanx...
Yes, we are talking about FCP X...this is the thing:
I worked on a project a few days ago and went to share - export movie.
Today, i opened the FCP again, to make some changes, and when i enter to the project, it shows me as one big clip.....i dont see it says compound clip....and i tried anyways pressing break appart clips...but nothing....could it be that i made it compound before exporting it..? if so how can i recover the un-compound version >?
I tried to import the saved .mov file, but it opens the same....as one long clip...
Pls help...thanx.

HT201407 i just update my iphone 3gs to ios 6.0.1 and after that its not working.... i activated it again to restore but then it will say please insert sim card even though there is sim card inside.pls help. i need to use my mobile.

please help

LOL! - you poor bugger, Ognyan!
I'm starting to serihously think this phone has been jailbroken... I've got a senior technical support advisor at Apple who is working on the case. He has gone through everything he can possibly think of, but won't take "no" for an answer.
At the moment, he has logged everything with the Engineering Department, who is going to look into it further using the IMEI number and see what they come up with. If worse comes to worse, Apple will apparently replace the phone for a fee. The problem is that it is 800+ days out of warranty...
Anyway, we'll see how we go. If anybody has got any ideas about this, please continue to provide answers. I appreciate all responses

Hi everyone,i need to set up my icloud through my PC but i hardly sign in to my pc,, pls help

Hi everyone,i need to set up my icloud through my PC but i hardly sign in to my pc,, pls help, i need to enable the photo stream

Hi everyone,i need to set up my icloud through my PC but i hardly sign in to my pc,, pls help, i need to enable the photo stream

Populating datagrid using web service. pls help me...

i don't know why i cant populate my data grid using data on a
web service, i try to access web service by a simple return string
like helloworld and it is working but when i try to get data in web
service nothing happens there is no error on my builder and web
page, but it dont display the data.. bellow is my web service and
code. pls help i need this to work.. thanks..
<DataTable>
−
<xs:schema id="NewDataSet">
−
<xs:element name="NewDataSet" msdata:IsDataSet="true"
msdata:MainDataTable="Customer" msdata:UseCurrentLocale="true">
−
<xs:complexType>
−
<xs:choice minOccurs="0" maxOccurs="unbounded">
−
<xs:element name="Customer">
−
<xs:complexType>
−
<xs:sequence>
<xs:element name="num" type="xs:string" minOccurs="0"/>
<xs:element name="name" type="xs:string"
minOccurs="0"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
−
<diffgr:diffgram>
−
<DocumentElement>
−
<Customer diffgr:id="Customer1" msdata:rowOrder="0"
diffgr:hasChanges="inserted">
<num>1</num>
<name>String1</name>
</Customer>
−
<Customer diffgr:id="Customer2" msdata:rowOrder="1"
diffgr:hasChanges="inserted">
<num>2</num>
<name>String2</name>
</Customer>
−
<Customer diffgr:id="Customer3" msdata:rowOrder="2"
diffgr:hasChanges="inserted">
<num>3</num>
<name>String3</name>
</Customer>
</DocumentElement>
</diffgr:diffgram>
</DataTable>
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
import mx.controls.Alert;
[Bindable] private var ArrayData:ArrayCollection;
private function getString(event:ResultEvent):void{
Alert.show(event.result.toString());
private function getStringError(event:FaultEvent):void{
Alert.show("Error");
private function button_click():void{
Test.HelloWorld.send();
private function getData(event:ResultEvent):void{
grid.dataProvider =
event.result.diffgram.DocumentElement.Customer;
private function getDataError(event:FaultEvent):void{
Alert.show("Error");
private function button1_click():void{
Test.getData.send();
]]>
</mx:Script>
<mx:WebService id="Test" wsdl="
http://localhost/HawkWeb/Hawkeye.asmx?wsdl">
<mx:operation name="HelloWorld" result="getString(event)"
fault="getStringError(event)" />
<mx:operation name="getData" result="getData(event)"
fault="getDataError(event)" />
</mx:WebService>
<mx:Button x="10" y="10" label="Get String"
click="button_click()"/>
<mx:Button x="10" y="40" label="Get Data" width="83"
click="button1_click()"/>
<mx:DataGrid id="grid" x="10" y="70" width="501">
<mx:columns>
<mx:DataGridColumn headerText="Num" dataField="col1"/>
<mx:DataGridColumn headerText="Name"
dataField="col2"/>
</mx:columns>
</mx:DataGrid>
</mx:Application>

the datafield in my code is wrong, i change it to num and
name. but nothing happens..

Hi pls. help i downloaded IOS 7 and my babys ipad is not working anymore.Only usb and itunes icon is on the screen i already turn it off and still the same screen coming.pls help thank you

hi,
I DOWNLOADED IOS 7 in my daughters ipad and now i cant open it. the screen shows only usb and an itunes icon. pls help she need it for her games. thank you.

DUPLICATE POST
Please see: https://discussions.apple.com/thread/5513386?tstart=0

Pls help me with this installation problem. Your advice is highly needed.

I am installing oracle 11.1.6.0 on windows xp professional everything was going fine untill there was a pop up that reads below
INFO: exit-tool: Launch browser
INFO: saving exit only tools ...
INFO: no detached only tools in this session
INFO: exit-only tools are created in single installation
INFO: no. of sets of tools to be run: 1
INFO: ca page to be shown: true
INFO: exitonly tools to be excuted passed: 1
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat /orahome c:\app\doN H\home /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile c:\app\doN H\home\network\install\netca_typ.rsp
Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat has failed
Execution Error : 'c:\app\doN' is not recognized as an internal or external command,
operable program or batch file.
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to c:\app\doN H\home
Configuration directory is set to c:\app\doN H\home\cfgtoollogs. All xml files under the directory will be processed
INFO: The "c:\app\doN H\home\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is C:\app\doN H\home\oui\bin\runConfig.bat ORACLE_HOME=C:\app\doN H\home MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home C:\app\doN H\home we use the runConfig Command instead of the plugin's command
INFO: Created a new file C:\app\doN H\home\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\app\doN H\home\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\app\doN H\home\cfgtoollogs\configToolFailedCommands.bak
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants
INFO: Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat /orahome c:\app\doN H\home /orahnam OraDb11g_home1 /instype typical /inscomp client,oraclenet,javavm,server,ano /insprtcl tcp,nmp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile c:\app\doN H\home\network\install\netca_typ.rsp
Command = C:\WINDOWS\system32\cmd /c call c:\app\doN H\home/bin/netca.bat has failed
Execution Error : 'c:\app\doN' is not recognized as an internal or external command,
operable program or batch file.
INFO: Configuration assistant "Oracle Net Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to c:\app\doN H\home
Configuration directory is set to c:\app\doN H\home\cfgtoollogs. All xml files under the directory will be processed
INFO: The "c:\app\doN H\home\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
INFO:
The Runconfig command constructed is C:\app\doN H\home\oui\bin\runConfig.bat ORACLE_HOME=C:\app\doN H\home MODE=perform ACTION=configure RERUN=false $*
INFO: Since there is an Internal Plugin Invocation or a Java Plugin Invocation tool in the Oracle Home C:\app\doN H\home we use the runConfig Command instead of the plugin's command
INFO: Since the option is to overwrite the existing C:\app\doN H\home\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\app\doN H\home\cfgtoollogs\configToolFailedCommands.bak.1
SEVERE: OUI-25031:Some of the configuration assistants failed/cancelled. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: No
1...The Netmgr and the ODCA was not properly configured and they are not opening on the windows enviroment.
2...The sqlplus, whenever called up, aooears and disappears in 1 second
3...I can not connet to the database. Says adapter error
4...Will 1 start the listner before i can connect and how?
Ur contribution is highly needed. TNX

I am installing oracle 11g on windows xp, everything installed suceessfully except the enterprise control. the error reads
Jan 14, 2011 5:32:30 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:32:40 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:32:51 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:01 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:11 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:21 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:31 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleorcl1' to fully start
Jan 14, 2011 5:33:41 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at G:\app\doN_H\cfgtoollogs\dbca\orcl1\emConfig.log for more details.
Jan 14, 2011 5:33:41 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:869)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:250)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:213)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:235)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
at java.lang.Thread.run(Thread.java:595)
Jan 14, 2011 5:33:41 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\app\doN_H\product\11.1.0\db_1\oui
It also told me that i can configure it later by running G:\app\doN_H\product\11.1.0\db_1\BIN\emca.script
Pls help me. I appreciate ur help so far.

How to Change the Default SSH Port from Terminal ? now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

solved pls help needed in creating template

hi frs
i have created a template need some modification to be done my xml output looks like below
off hours q1 q2 q3 avg
aaa 10 1 2 3 2
bbb 20 2 4 0 3i have done everything but my doubt is while creating avg
to get average i used the following code
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 3?> i have used div 3 but my requirement is like if any thing is 0 for ex if q1= 2 and q2=4 and q3=0 then my formula for avg is like below
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 2?> like wise if we have values like q1=1 ,q2=0 ,q3=0
then
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 1?>how to get it.
pls help.
thanks
basa
Message was edited by:
Badsha
Message was edited by:
Badsha
Message was edited by:
Badsha

Hi,
I dont know the solution for this, but heres a work arround
//create new label some where else in the excel sheet as shown below
Label lblcmbdata;
for(int i=0; i<1000; i++)
 lblcmbdata = new Label(75, i, (i+1)+" satish", format);
 sheet1.addCell(lblcmbdata);
}//set the validation range as shown below
writableCellFeature.setDataValidationRange(75,0,75,1000);
Label cmb = null;
cmb = new Label(0, 1, "Select",format);
cmb.setCellFeatures(writableCellFeature);
sheet.addCell(cmb);this will create a combo list with 1000 values
also you can keep the data to be populated in the different sheet in same workbook by creating a named range as below
workbook.addNameArea("cmbdata", sheet1, 0, 0, 0, 1000);
// then fill the data in sheet1
Label lblcmbdata;
for(int i=0; i<1000; i++)
 lblcmbdata = new Label(0, i, (i+1)+" satish", format);
 sheet1.addCell(lblcmbdata);
//set the validation named range as below
writableCellFeature.setDataValidationRange("cmbdata");
Label cmb = null;
cmb = new Label(0, 1, "Select",format);
cmb.setCellFeatures(writableCellFeature);
sheet.addCell(cmb);Thanks and Regards
Satish

Can someone pls help me with java on my macbook pro because after i download the mountain lion java has died and i need java to see streaming quotes from stock market

can someone pls help me with java on my macbook pro because after i download the mountain lion java has died and i need java to see streaming quotes from stock market

Java is no longer included in Mac OS X by default. If you want Java, you will have to install it.
However, note that you should think twice before installing Java for such a trivial need as looking at stock market quotes. There are other ways to get that information that don't involve Java, and using Java in your web browser is a HUGE security risk right now. Java has been vulnerable to attack almost constantly for the last year, and has become a very popular, frequently used method for getting malware installed via "drive-by downloads." You really, truly don't want to be using it. See:
Java is vulnerable… Again?!
http://java-0day.com

HT3702 I am unable to add my bank/card details in my apple account, every time i am getting a message that it has been declined. kindly help me in authorise my bank card in my apple account i need to purchase few apps, pls help me

Hi,
I am unable to add my bank/card details in my apple account, every time i am getting a message that it has been declined. kindly help me in authorise my bank card in my apple account i need to purchase few apps, pls help me

What sort of card are you trying to use ? If it's a debit card then I don't think that they are still accepted as a valid payment method - they are not listed on this page and there have been a number of posts recently about them being declined
If it's a credit card then is it registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management

HT1222 hello..i accidently delete all my files in may ipodtouch...and ican restore it..i need to have a 10.6.3 version of itune,but i cant download files,coz i only have 32 bit..pls, help what o do. i love my ipodtouch realy..i just want to restore my itu

hello..i accidenty delete All my files in my ipod touch,,and icant restore my itunes,coz i need a version of itunes 10.6.3,but i only have 32bit..i cant download because they need 64bit,,pls,,help me dont know what to do,,i need to restore my itunes music..sorry im not good in english,,try to understand

I assume you don't have a backup on an external HD. You always should, because then you could easily fix your problem.
Boot in Safe Mode. See What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
Safe Boot takes longer than normal startup
http://support.apple.com/kb/TS1884?viewlocale=en_US
 Cheers, Tom

Need to update the xml clob-pls pls help!

my xml is stored as blob, i can view,do string manipulation and churn out data etc...but now i have a request where i need to find some particualr node and modify its value.
here is what i m doing now which works.
select compressor2.blob_decompress2(xml_data) into l_blob
from tablename where id=2008890;
clob_data := utl2.blob2clob(l_blob);
parser := xmlparser.newParser;
xmlparser.parseClob(parser, clob_data);
doc := xmlparser.getDocument(parser);
nl := xmldom.getElementsByTagName(doc, '*');
len := xmldom.getLength(nl);
dbms_output.put_line('Length : ' || len);
tag_name := 'Node Verson : ' || xmldom.getVersion(doc)|| ' ';
for counter in 0..len-1
loop
tag_name := '';
node := xmldom.item(nl, counter);
parent_node := xmldom.getParentNode(node);
child_node := xmldom.getfirstchild(node);
tag_name := 'Parent Name : ' || xmldom.getNodeName(parent_node) || ' ';
tag_name := tag_name || 'Node Name : ' || xmldom.getNodeName(node) || ' ';
IF xmldom.getNodeType(child_node) = xmldom.TEXT_NODE THEN
tag_name := tag_name || 'Node Value : ' || xmldom.getNodeValue(child_node)|| ' ';
ELSE
tag_name := tag_name || 'Node Value : Node has child.No Node value.' || ' ';
END IF;
tag_name := tag_name || 'Node Type : '||xmldom.getNodeType(child_node) || ' ';
ele_name := xmldom.getDocumentElement(doc);
child_nl := xmldom.getElementsByTagName(ele_name,'*');
IF xmldom.isNull(doc) THEN
htp.p('Document is null');
ELSE
htp.p(tag_name);
END IF;
end loop;
b_blob := utl.clob2blob(tag_name);
select compressor2.blob_compress2(b_blob) into b_blob2 from dual;
insert into xupdate values (2008890,b_blob2);
i still need to know how to update the xml clob... i want to know how to find the particular node and then modify the clob with the new value. rest i can update the table.
pls pls help..on this.

my oracle version.
10.2.0.1.0
i want to update here..
<?xml version="1.0" encoding="utf-8"?>
<TestData xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
 <Status>CompletedNormally</TestCompletionStatus>
 <ComputerName>DUILT10</ComputerName>
 <StartTime>2008-03-19T15:12:23</StartTime>
---Some more noded----
<Parameters>
 <RangeMeasured>
 <Name>PDissBol-5[C]</Name>
 <Min>1.22</Min>
 <Max>1.36</Max>
 <Units>W</Units>
 </RangeMeasured>
 <TextMeasured>
 <Name>ComputerName</Name>
 <Value>DUILT10</Value>
 </TextMeasured>
 <RangeMeasured>
 <Name>TrackError25[C]To-5[C]</Name>
 <Min>0.031</Min>
 <Max>0.041</Max>
 <Units>dB</Units>
 </RangeMeasured>
 <RangeMeasured>
 <Name>Power-5[C]</Name>
 <Min>1.988</Min>
 <Max>1.061</Max>
 <Units>dBm</Units>
 </RangeMeasured>
---some more noded---
</Parameters>
</TestData>
the file is huge.
what i need to chang==>
I 1st need to find this PDissBol-5[C] within the <Parameters> Node and then change its <Min> and <Max>
and then update the table.
pls pls suggest.

My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

Hi there,
Use the method described in the link below to get back up and running:
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
I hope this info helps!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

BB Curve 8320 Software needed! pls help

Im a BB 8320 Curve user. Software version 4.2.2.180 (Platform 2.5.0.36) T-mobile user. I need to download this version bcoz i've upgraded to OS 4.5 but im didnt liked dat much. So i want to switch to 4.2.2.180 (Platform 2.5.0.36) but didnt get this version anywhere. Pls help me friends...!!!
Solved!
Go to Solution.

Hi and Welcome to the Forums!
All carriers official versions are available via this portal:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
I've no idea which carriers have the version you desire...you'll have to dig through to find it.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

PLS HELP I NEED NET!

Similar Messages

Maybe you are looking for