Pls help in a routing question

RTA# show ip route ospf
O IA 6.0.0.0/8 [110/65] via 5.0.0.1, 00:00:28, Serial2/1/0
O* E2 0.0.0.0/0 [110/1] via 5.0.0.2, 00:00:16, Serial2/1/0
Refer to the exhibit. On the basis of the information presented, which statement is true?
A - A default route is configured on the local router.
B - Network 6.0.0.0/8 was learned from an OSPF neighbor within the area.
C - OSPF router 5.0.0.2 is an ABR.
D - The default route is learned from an OSPF neighbor.
Answer: B
I didn't got the idea of the answer, so anyone can help?

Hi Mahmoud,
AFAIK O IA are inter area routes which are originated from other areas and O are intra area routes which are generated from within area.
I believe answer B is correct because 6.0.0.0/8 is learned from neighbor which is within the area and I believe its learned via 5.x.x.x which may be its neighbor and may be in same area.
Regards,
Ankur
*Pls rate all helpfull post

Similar Messages

HT201363 pls help to change security question, i don't remember

pls help to change security question, i don't remember
Tks
<Email Edited by Host>

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(105126)

Thinking of getting a Curve 8310...pls help me with some questions

I have an ancient palm centro which I love dearly but the thing is falling apart as I have had it for over 2 years. I recently upgraded to a palm pixi plus but when I found out that I cannot bluetooth or text message calender events to my husband's phone, I returned it. I have a few questions about this phone:
1.) Can you bluetooth or text message calendar events to another phone that is not a blackberry? And in the same respect, can you receive calendar events from another phone in the same way? This is how I communicate upcoming events with my husband with my centro and it goes right on our calenders with a reminder. I am unwilling to give up this feature.
2.) I am assuming that blackberry creates a chat log like in my centro during text messaging?
3.) Can you create birthday reminders from your contact list? I was shocked that the pixi did not have this option.
4.) Does the phone have a switch on the side to silence the phone and it will vibrate?
Thank you so much to anyone who takes the time to answer my questions!

Hey Lizzy731,
Welcome to the BlackBerry Support Community Forums.
Here is the answers to your questions.
1. You can not Bluetooth transfer from one device to another and send calendar events. However Bluetooth media transfer does work. If anyone sends you an email with a calendar invite, it will save to your BlackBerry.
2. When sending and receiving SMS, it does have a record of every message sent and receive.
3. You do have the option to place in the birthday within a contact.
4. You do have convenience keys which can be customized to your pleasure, so if you want to make one of the buttons to vibrate only, then you can.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Pls Help! Eclipse plugin question...

Hi, I am trying to install the Eclipse Plug-in for the PDK v1.2.0 onto Eclipse (version 3.0.2) but however, it doesn't seem to work. When I go from Windows>Preferences> I don't see any 'Portal Development Kit'. Also, I seem to get the error that this plugin does not support java 1.4. Is there a updated plugin? or is there a way around this?
Thank you so much!
Baggett

Hi,
unfortunately you need Eclipse 2.1 to run the plugin.
It does not work with Eclipse 3.x
Best Regards
Frank

Hi, I have a power Mac G5 with an airport card and I am having a hard time connecting to my regular NETGEAR router. Any help, Hi, I have a power Mac G5 with an airport card and I am having a hard time connecting to my regular NETGEAR router.PLs help

Hi, I have a power Mac G5 with an airport card, MAc OS X 10.5.8, Wireless card is Airport Extreme ( 0x14E4,0x4E ) and I am having a hard time connecting to my regular NETGEAR router. PLS Help,
Thanks,
Mishcadola

I spent 2750 $ for my 24" iMac (price for my region)...
And the perfect world of Steve Jobs still close, but never we've been in there!

I reinstalled my computer because it was too slow, and Safary icon has a ? question mark on it in the dock, i pulled it out with the hope that i can bring it back from the application, but the icon could not be found in the application. Pls help me.

Could you pls help me? i reinstalled my computer and the Safari Icon has a ? mark on it in the dock, I pulled it out and it disappeared, I checked for this icon in the application folder but couldnt find it there. So for me to go on Internet i have to open Firefox first. 2. The message Java Plug in has been disable appeared immediatle after the reinstallation. I need help from the community pls.

Welcome to the Apple Support Communities
I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

I have an old PowerPC and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same router, but the old Mac connects with full bars, but the MBP struggles with only 2. Pls help, thanks!

I have an old PowerPC running 10.4.11 and a Macbook Pro running 10.6.7 sitting side by side. Both are using AirPort to connect to the internet wirelessly to the same wireless router. The old Mac connects with full bars but the MBP struggles with only 2 bars. Pls help, thanks!

BDAqua,
Thanks for the response.
Apple has used the term "Digital Audio" to identify this machine. System Profiler has the following information:
Machine Name:          Power Mac G4
Machine Model:          PowerMac3,5
CPU Type:          PowerPC G4 (2.1)
Number Of CPUs:          1
CPU Speed:          800 MHz
L2 Cache (per CPU):          256 KB
Memory:          768 MB
Bus Speed:          133 MHz
Boot ROM Version:          4.3.3f2
Serial Number:          XBxxxxxMK9
Sales Order Number:
Yes, I could connect them by ethernet if all I wanted to do was transfer files, but I would like to network them so I could use wireless internet. The machines are not always so close together, I did that to simplify the testing. With the very slow transfer speeds I am reluctant to move ahead with the internet step.
<Edited By Host>

I cant reset my security question pls help me

I cant find the reset your security question pls help me

If you mean that you're aren't getting the reset link as described in the steps half-way down this page : http://support.apple.com/kb/HT5312, then that will only show if you have a rescue email address (which is not the same thing as an alternate email address) set up on your account.
If you aren't getting the link then you don't have a rescue email address, and you won't be able to add one until you can answer your questions - you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the above HT5312 page to add a rescue email address for potential future use

Very simple question pls help me

I just want to use oracle sql and pl/sql workshop isqp*plus web site, so which product or software shouuld i download??? pls help me.
thanks.

Pl see your other 2 threads on the same topic (posting the same question multiple times does not make the issue go away ;-) )
Oracle install error 10g 64 bit windows
which product should i install??
HTH
Srini

Pls help me how to reset my security question I know my emails and password but when I purchased some apps I can't bought it cos there is a security questions so pls help cos I put some iTunes redeem card alright?

Pls help those anyone to how to reset the security questions I know my emails addrs and password when I purchased the apps there is a additional or security question appears in the screen so pls help me apple company how to out this coz I bought new itunes redeem card I already load then after this I couldn't use it?

1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
2. Here are two different but direct methods:
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contacting Apple for support
        and service.
3. For other queries about Apple ID see Frequently asked questions about Apple ID.
4. Rescue email address and how to reset Apple ID security questions
5. For online assistance use Apple - Support - Express Lane

HT201363 Hi dear sir/Madam i have my apple id & its password but i forgot the answers of the security questions and i have no rescue email pls help me how can i reset the security questions?

Hi dear sir/Madam i have my apple id & its password but i forgot the answers of the security questions and i have no rescue email pls help me how can i reset the security questions? as i have some credit in my account i can not creat a new apple id.

You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(105243)

TS3297 Everytime i purchase from the apps store it always show the security questions and i cant buy the apps i want because the questions are not answerable. Pls help....

Everytime i purchase from the apps store it always show the security questions and i cant buy the apps i want because the questions are not answerable. Pls help....

I think you need to reset those questions. You'll need to call the tech support for your country, ask to be connected to the Account Security Team and then ask if they can reset the questions for you.
http://support.apple.com/kb/HE57

Clarity required on these questions pls help?

HI ,
Need your help in solving these questions, these are questions asked in during interviews
a) Dyamic actions, how to create a customer specific dynamic action , specify configured fields and rules?
b) how to create Customer specific infotype, , please explain with any example with which are the fields you have created
c)    Msn 10, 20, 30
d) Revision infotypes
e) What are the infotypes which cannot be enhanced
f) What is log, How can we cancel and edit it?
g) What is Ap/b
h) Which is Default feature for wage types
i) What are Infosets
Thanks and Regards
j) Define Benefit area

You can do as suggested already and use interface nodes and cross component mapping; but that is all really not necessary. It creates a situation where you calling application is too dependent upon the freely programmed input help. You want to try to avoid the situation where the calling application needs code or mappings to communicate with the input help.
That is easy to do because the framework passes all the information you need into the freely programmed input help via the value_help_listener object.
Part of the Freeley Programmed Input Help Component should be the component interface IWD_VALUE_HELP. This comes with a component controller method called SET_VALUE_HELP_LISTENER. This allows your freely programmed value help to capture this object called listener of type IF_WD_VALUE_HELP_LISTENER. I generally just store it awa into a component controller attribute.
With this listerner object you have direct access to the context attribute in the calling component. You can query information about the calling UI element and of course set values directly back into it. The listener is a hugely helpful object and should be the way you interact with the calling component whenever possible. Here is small example:
set single attribute
wd_this->value_help_listener->f4_context_element->set_attribute(
exporting
    name = wd_this->value_help_listener->f4_attribute_info-name
    value = l_time

Simple Servlet question, pls help

This is my form submission part in my jsp page
<form name="updateForm" method="POST" action="/Update"> This is my web.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
    <servlet-name>/Update</servlet-name>
    <servlet-class>UpdateMap</servlet-class>
</servlet>
</web-app>This is my UpdateMap.java
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.util.*;
public class UpdateMap extends HttpServlet
    public UpdateMap()
}I put my UpdateMap.class in WEB-INF/classes/ directory but when I clicked the submit button in my jsp page, I got The requested resource (/Update) is not available error

Found my own error. The jsp submission code should be
<form name="updateForm" method="POST" action="Update"> But I still got error when submit
The specified HTTP method is not allowed for the requested resource ( POST method of HTTP is not supported by this URL.)Pls help.
Thanks

Pls help how to check the condition in java server faces.....???

Hi All
I have strucked with code pls help....
How can i check the codition in java server faces.....?
like in my Application when user provides the in put like some state name in the next page i have to display some url for that state .......if he provide some other state name it will be different url .....pls help me how can i do that,,,,,,???
thanks in advance..

There are certainly ways to do that. E.g. using the rendered attribute, using conditional statements in EL, using a specialized getter for that (lazily loaded if necessary), etcetera. But your functional requirement is unclear, so I can't go in detail with that.
In the future, please try to write normal English sentences. Don't write like SMS talk and save the periods and commas. The more effort you put in your question, the more chance you will be taken for serious and the more effort others will post in their answers.
Also, in the future, JSF related questions should be posted in the JSF forum.
Edited by: BalusC on 12-aug-2008 7:47

Pls help in a routing question

Similar Messages

Maybe you are looking for