Pls help. MacBook Pro is dead. What could be the problem?

My macbook pro just suddenly won't turn on, won't charge and will not let me do anything on it. I bought it Sept 2010 and I never had any problems since.
When i plug the charger there is an orange light blinking, you wont even notice it so much. The battery life indicator on the side is not working too.
Here are the things I tried with another macbook pro:
Changed charger (my charger is working)
Changed the battery (my battery is fine) and put it back.
I saw online instructions but it seems my Mac still is totally DEAD:
1. Holding down power button for 10secs
2. Reset SMC http://support.apple.com/kb/ht3964
3. And Safe Boot and Fsck etc.. http://www.macworld.com/article/2018853/when-good-macs-go-bad-steps-to-take-when -your-mac-wont-start-up.html
I'm hesitating to try the dvd cause it might just get stuck inside since my Mac doesnt really respond to any.
And I could just go to the Apple Store and save time and effort but it's not that easy where I live in and I would like to have my Mac's life back asap.
Any help is appreciated!

Zap the PRAM.

Similar Messages

I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

I assume that you have installed new RAM in your MBP.
It would be helpful if you indicated the EXACT model/year MBP that you have.
What the the RAM specifications that you are trying to install?
Ciao.

Appears and quickly disappears a new screen overlaying the screen in use, it starts at the bottom of the screen tela.MACbook pro retina.O what could be causing this?

appears and quickly disappears a new screen overlaying the screen in use, it starts at the bottom of the screen tela.MACbook pro retina.O what could be causing this?

Thanks for the suggestion, the next step was to call Apple, who gave me a claim number, which I discovered you must have to get anything done with them. They refered me to a Apple store or repair center, after some reseach took it to the Computer Store in Mobile, Alabama and they were excellent. They took pictures of the screen with bug submitted it to Apple who denied the claim but they kept kicking it up to the next level and finally Apple agreed to sent new cover. The Computer Store had the cover the next day, they changed it out and now I am bug free. If your in the area of Mobile Alabama you can feel good about getting help from the Computer Store. For the two folks that responded to my note, Thank You, good comments and good advice.

My macbook pro has been shutting off on its own. The power cord "shuts off" (does not work) simultaneously. Does anyone know what is wrong? or what could be the problem?

My macbook pro has been shutting off on its own. The power cord "shuts off" (does not work) simultaneously. Does anyone know what is wrong? or what could be the problem?
When my mac finally turns on the date/time is reset a windows pops up saying, "Your computer's clock is set to a date before January 1, 2008. This may cause some applications to behave erractically."

Resetting your Mac's PRAM and NVRAM
If you have Apple Care you should give them a call.

My macbook isn't charging continuously. It goes between 'charging' to 'not charging' every few seconds. What could be the problem?

My macbook isn't charging continuously. It goes between 'charging' to 'not charging' every few seconds. What could be the problem?

Try a SMC reset:
http://support.apple.com/kb/ht3964
Have you checked the connections from the power adapter to the MBP? Note the pins in the power adapter are spring loaded. See if they are free. Are the connections discolored?
Have you checked the battery status? Open System Profiler or System Information and look at this display:
Post a copy of yours.
Ciao.

HT1199 my mac pro will not install updates or new software such as printers what could be the problem

I have tried to complete updates and install software and for some reason it will not update or install new software such as a printer. What could be the problem

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

HT1338 I have version Mac OS X 10.5.8. I no longer get software updates. What could be the problem?

I have version Mac OS X 10.5.8. I no longer get software updates. What could be the problem?

No problem. You have to pay for the next upgrades, just like you paid for the last one.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

I am trying to put music into my 3rd gen ipod touch and older ipod shuffle but they do not show up on Itunes when i connect them,what could be the problem?

i am trying to put music into my 3rd gen ipod touch and older ipod shuffle but neither are popping up on itunes, what could be the problem?

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

I Have mac osx 10.5.8 and have tried to update to mac osx snow leopard 10.6.3, but I constantly get the install failed message. What could be the problem?

My imac is currently running mac os x 10.5.8. I've tried to install mac osx snow leopard 10.6.3, but have been unsuccesful because the disc fails to install.
What could be the problem?

noondaywitch wrote:
You should boot from the Installer DVD by holding down the C key during start up until the Apple logo and spinning cog wheel appears. Allow plenty of time for the installer to appear - it can take several minutes when booting from a disc.
I suggest not doing this unless the Apple recommended method (starting by double-clicking on the
Install Mac OS X icon while booted up normally) fails.
There are several reasons for this:
The Apple method performs a check of the DVD's integrity before starting up from it. This can't be done if you start up directly from the DVD.
The Apple method "phones home" using the current OS's network settings to check for updates to the incompatible items database included on the DVD & writes a lot of pre-install data (the 'Mac OS X Install Data' stuff) to the HD before restarting automatically from the DVD to finish the installation. This may not work as expected if you start up directly from the DVD.
The pre-install data on the HD speeds up the installation process (because running the OS from the HD to build the data is faster than doing that while running from a DVD).
The Apple method makes it possible to "gracefully" cancel the installation before the automatic restart occurs without leaving the existing OS on the HD in a corrupted, "half-installed" state unable to restart the Mac. This sometimes happens if the installation process hangs & one has to force-restart the Mac to recover. As long as this occurs during the "pre-install phase" before the restart, the existing OS should remain untouched & intact.
Also note that the Snow Leopard installer is quite a bit more sophisticated than the previous ones like for Leopard or Tiger. It automatically performs the equivalent of Disk Utility's Verify Disk step before beginning the installation & performs more checks during the installation process (including checking the pre-install data for errors). It is usually not necessary to remove the "Mac OS X Install Data" folder after a failed installation, which may just cause the process to take longer on subsequent attempts, but if nothing else helps it is certainly something worth trying.

My ipad frequently says "I am not connected to internet" although it is and there is a good signal. after a while it connects regularly. what could be the problem?

my ipad frequently says "I am not connected to internet" although it is and there is a good signal. after a while it connects regularly. what could be the problem?

You can try these things and see if it helps.
Tap Settings, then tap Safari on the left side. Then on the right side - tap clear history, clear cookies, clear cache. Clear all three. Reboot your iPad. Hold down on the sleep button at the top until the red slider appears and slide to power off. Then hold down on the sleep button until the Apple logo appears and the iPad will restart. Launch Safari and see if helped.
If that doesn't help, try this. Tap Settings, then tap General on the left side, then scroll down on the right side and tap Reset, then tap Reset Network Settings at the top. Reboot your iPad as described above. Launch Safari and log on to the Internet. You may have to enter your network password again when you reset Network Settings.
Renew the Lease in WiFi by going to Settings>WiFi>Network Name>Renew Lease. Reboot your iPad and try Safari again.

Install Woe - What could be the problem?

Hi all,
I'm hoping someone can help me.
Got a new Printer (Xerox Phaser 8560), and have been installing drivers all over the office, MacIntel and PPC computers, many and no problems until I went to install on my iMac PPC, which resulted in the installer program crashing right after it attempts to find the printer on the network. I tried installing as root user with the same result. I made sure permissions were rebuilt, but always the same installer crash.
To make a long story short, I reinstalled Leopard from scratch, and it's still doing the crash when I try to install the driver. On the new install, I did "transfer" over my settings from the previous install, so I guess that helps narrow it down. But what could be the problem here?
Suggestions gladly accepted.
Thanks, and so long for now, TOM

Hi,
I think I may be on to something. I had removed a program (System Preference Pane) called ABFR, A Better Finder Rename 7, which was for Tiger, but it got carried over into Leopard. After it caused a problem with iCal, I learned that it wasn't for Leopard, so I removed it.
When I went into the latest install of Leopard System Preferences, there it was, and when I tried to remove it with a control click, I got an error which said it couldn't be removed because of an error.
I had brought over the settings from the previous System and didn't realize it was going to bring that over somehow. Looks like a totally new Leopard install and a total rebuild from scratch is in order. I wrote an e-mail to the developer, but I have my doubts.
Those little programs that install those System extensions should have them all disabled by Apple when you do a major software update. I hadn't used that program for years, but there it was causing trouble, and now it might still be causing trouble.
FYI, Xerox recommends using the drivers from their site and not any drivers supplied by Apple, either Tiger or Leopard.
Thanks, and so long for now, TOM

The laptop fan makes sound when i play games on my laptop...what could be the problem?

the laptop fan makes sound when i play games on my laptop...what could be the problem?

Then install iStat Menus 4.04 so you can provide us with some temperature and fan speed data.
What about before you start the game? After you start the game do this:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
If it's the game causing the problem then either something is wrong with the game or it's not compatible with Lion.

HT1937 My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.

My imessage isn`t working properly from my iphone. what could be the problem? how can I found out? the internet is working and in ipad i can send message.

I have no idea what the "freezer fix" is, nor why anyone would think temporary exposure to cold will somehow fix a hardware issue with a 100% solid state device. Also, actually freezing your iPhone may very well itself cause damage.
If you dropped it and wifi immediately failed to work, the odds are you inflicted physical damage to it - perhaps the antennae connection internally. You could try a simple reset and see if that helps, but if not, you need to take it into Apple for an evaluation and diagnosis.
If it has internal damage, since you dropped it, your warranty no longer applies. Apple does not repair iOS devices, the merely swap them for factory refurbished units (and send your damaged one back to the manufacturer in China for refurbishment or recycling). You would ahve to pay the out of warranty replacement fee (look on your country's Apple web site, under support for the iPhone for fees).

My iPhone 5s is plugged in. It does not show that it is charging but gives the alert "ding" sound every 15-16 seconds. Does anybody know what could be the problem?

My iPhone 5s is plugged in. It does not show that it is charging but gives the alert "ding" sound every 15-16 seconds. Does anybody know what could be the problem?

It sounds like it starting to charge, then suddenly stops over and over. This can happen if the cable or adapter is bad or if your charing port has an issue.
Try using a different cable and/or wall adapter. If the issue continues, it's probably the iPhone. If it does not continue, then it's the cable or adapter. Continue to swap to see what's bad.
If you don't have another cable or adapter to test will, take your iPhone and your cable/adapter combo to an Apple Retail Store or Apple Authorized Service Provider. They can help you narrow the issue down and provide service as indicated. https://locate.apple.com/country

I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???

I have an IPad 2 and an Iphone4, but as it suggests that I can click a photo on my iPhone and the image will also reflect simultaneously on my IPad does not happen, though I have activated cloud on my iPhone. What could be the problem.???
Also in my iPhone4 the photos that I have downloaded manually from my computer cannot be erased from the phone, how do i do this.???

Sounds like you are not running iOS 5 ..........
Update your iPad 2 to iOS 5............
I purchased an iPad 2 for my wife for Xmas and it did not come with iOS 5 so I had to update it......
http://www.apple.com/icloud/get-started/
http://support.apple.com/kb/HT4972

I have model A1458...been acting possessed.... apps opening and closing on their own...zooming in and out... not always responsive to my touch... what could be the problem?

i have model A1458...been acting possessed.... apps opening and closing on their own...zooming in and out... not always responsive to my touch... what could be the problem?

The two most likely culprits would be a faulty cable/charging block or a bad digitizer. Try charging the device with a different charger and cable. If the problem goes away, then the problem is with your charger. If it does not, try the basics of resetting, restoriing from back up, restoring as new. If you still have the problem, make an appointment at the Genius Bar at your local Apple Store for evaluation.

Pls help. MacBook Pro is dead. What could be the problem?

Similar Messages

Maybe you are looking for