Pls.. Help me about LaserJet P1102 "not wirelles" - Installation Win 8_64bits

Bom dia ..
Eu não consigo instalar a impressora HP Lasejet P1102 "não é wireless" na nova CPU com Win8 64bits que comprei. Alguém pode ajudar-me, pois já fiz varios procedimentos e nada funcionou.
Eu já tentei fazer a instalação via link ou cd umas 4 vezes;
Eu já tentei fazer com o cabo USB conectado e desconectado na CPU;
Eu já troquei o cabo de porta USB;
Eu já fiz sem o teclado e mouse conectado para saber se não existia conflito de hw.
Nenhum das alternativas tive exito. Podem ajudar-me ?
Obrigado
Ricardo Galo

Krissy,
Welcome to the forum !
I can appreciate that you have a lot of things on your mind and some of them we may be able to help you with here, and some may require support that is beyond what we can provide through the forum.
If you are missing driver support for your camera, I would start with downloading and reinstalling the camera drivers from our support site. Here is the page for all the drivers relevant to the B570.
If you are unable to get the camera of other functions of the system working properly, you may want to give technical support a call 877-453-6686 in the US. They can help you get the camera working again and can remote into your system if needed.
Some of your questions may related to some installed programs no longer working as you expect them too. Missing buttons, etc. For this kind of help, we have some support services that may be available for a nominal fee - these are LenovoCare Premium support. The are available by phone or chat, and can also remote into your system to address some kinds of software and configuration issues that are outside the scope of normal warranty service. The number is 877-737-1082.
Sorry to hear about your troubles. I hope that some combination of these support options will help get your system working again the way you need.
Best regards,
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

HP laserjet p1102 not recognized after installation on windows 7 - 32bit

Hello
I need help with my hp laserjet p1102 installation, it's not working after installation.
I get a message say's(usb device not recognized)
can any one here get me a hint please??

ahmed,
What is the exact message? See these
You could also download a fresh version of the install CD. Drivers per OS version
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Pls help me: about log in

Dear all,
I have a created a dynamic page (PHP and mysql) with log in
(server vehaviour) page. and after user had enter their username
and password, if succeed they go to new page. in this new page ,
they can submit news. and my big problem is (sorry iam new bie) how
i can get their username in this new page that they had entered in
log in page, i want to search id_user in tabel1( field: id_user,
username, password) with their username and after got it , i want
to insert this id_user into table2 (filed: id_user, no_news,
date_news, news ). I hope my explaination will be understood. tks 4
any help....

I don't need the code, you do. :O) Read the instructions
below. Replace
the parts of the code that are bad with parts of the code
thar are good.
Let's look at the tutorial/post, posted below in it's
entirety from
http://friendsofed.infopop.net/2/OpenTopic?a=tpc&s=989094322&f=8033053165&m=324102421&r=32 4102421#324102421.
1. Log In User needs changes in two places, plus the removal
of three
lines. Find the following lines of code
$GLOBALS['PrevUrl'] = $accesscheck;
session_register('PrevUrl');Replace them with
$_SESSION['PrevUrl'] = $accesscheck;2. Then find
$GLOBALS['MM_Username'] = $loginUsername;
$GLOBALS['MM_UserGroup'] = $loginStrGroup;Change them to
$_SESSION['MM_Username'] = $loginUsername;
$_SESSION['MM_UserGroup'] = $loginStrGroup;
3. Finally, DELETE the following lines
//register the session variables
session_register("MM_Username");
session_register("MM_UserGroup");That's it. You're done with
your Login
form. You know need to replace a few lines in your logout,
but we'll wait
on
that.===========================Article========================I
have
discovered there is a serious bug with the Dreamweaver MX
2004 User
Authentication server behaviors when used in conjunction with
PHP5.
Basically, the problem is that the DW server behaviors use
obsolete code
that appears to work with PHP4, but breaks once deployed on
PHP5 (with
register_globals set to the default off setting).
I have notified Macromedia of the problem, and they have
logged it as a high
severity bug, but have given no indication as to when a patch
will be
issued. Fortunately, the solution is easily fixed by hand.
The server
behaviors affected are Log In User and Log Out User.
Log In User needs changes in two places, plus the removal of
three lines.
Find the following lines of code
$GLOBALS['PrevUrl'] = $accesscheck;
session_register('PrevUrl');Replace them with
$_SESSION['PrevUrl'] = $accesscheck;Then find
$GLOBALS['MM_Username'] = $loginUsername;
$GLOBALS['MM_UserGroup'] = $loginStrGroup;Change them to
$_SESSION['MM_Username'] = $loginUsername;
$_SESSION['MM_UserGroup'] = $loginStrGroup;Finally, DELETE
the following
lines
//register the session variables
session_register("MM_Username");
session_register("MM_UserGroup");
In Log Out User, locate these two lines
session_unregister('MM_Username');
session_unregister('MM_UserGroup');Replace them with
unset($_SESSION['MM_Username']);
unset($_SESSION['MM_UserGroup']);
NOTE: There is NO need to do this if you are still using
PHP4, and not
experiencing any difficulties with User Authentication.
However, it does
affect the instructions for Chapters 14 and 15 of Foundation
Dreamweaver MX
2004 for anyone switching to PHP5.
David Powers
Co-author: Foundation Dreamweaver MX 2004
"jangade" <[email protected]> wrote in
message
news:[email protected]...
> Sorry, i still don't understand about that tutorial, can
u explain me more
> detail pls ( i am using php triad: php 4, mysql 1.3 and
apache 1.3 ). i
> give u
> the code :
>
> login page code:
> <?php require_once('Connections/koneksi.php'); ?>
> <?php
> // *** Validate request to login to this site.
> session_start();
>
> $loginFormAction = $_SERVER['PHP_SELF'];
> if (isset($accesscheck)) {
> $GLOBALS['PrevUrl'] = $accesscheck;
> session_register('PrevUrl');
> }
> login page :
>
> if (isset($_POST['pemakai'])) {
> $loginUsername=$_POST['pemakai'];
> $password=$_POST['sandi'];
> $MM_fldUserAuthorization = "";
> $MM_redirectLoginSuccess = "sukses_login.php";
> $MM_redirectLoginFailed = "tmbhdtteknisi.php";
> $MM_redirecttoReferrer = false;
> mysql_select_db($database_koneksi, $koneksi);
>
> $LoginRS__query=sprintf("SELECT username, password FROM
tblteknisi WHERE
> username='%s' AND password='%s'",
> get_magic_quotes_gpc() ? $loginUsername :
addslashes($loginUsername),
> get_magic_quotes_gpc() ? $password :
addslashes($password));
>
> $LoginRS = mysql_query($LoginRS__query, $koneksi) or
die(mysql_error());
> $loginFoundUser = mysql_num_rows($LoginRS);
> if ($loginFoundUser) {
> $loginStrGroup = "";
>
> //declare two session variables and assign them
> $GLOBALS['MM_Username'] = $loginUsername;
> $GLOBALS['MM_UserGroup'] = $loginStrGroup;
>
> //register the session variables
> session_register("MM_Username");
> session_register("MM_UserGroup");
>
> if (isset($_SESSION['PrevUrl']) && false) {
> $MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
> }
> header("Location: " . $MM_redirectLoginSuccess );
> }
> else {
> header("Location: ". $MM_redirectLoginFailed );
> }
> }
> ?><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML
4.01//EN"
> "
http://www.w3.org/TR/html4/strict.dtd">
> <html>
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
> <title>Selamat Datang</title>
> .......
>
>
>
> and new page :
> <?php
> //initialize the session
> session_start();
>
> // ** Logout the current user. **
> $logoutAction = $_SERVER['PHP_SELF']."?doLogout=true";
> if ((isset($_SERVER['QUERY_STRING'])) &&
($_SERVER['QUERY_STRING'] !=
> "")){
> $logoutAction .="&".
htmlentities($_SERVER['QUERY_STRING']);
> }
>
> if ((isset($_GET['doLogout']))
&&($_GET['doLogout']=="true")){
> //to fully log out a visitor we need to clear the
session varialbles
> session_unregister('MM_Username');
> session_unregister('MM_UserGroup');
>
> $logoutGoTo = "index.php";
> if ($logoutGoTo) {
> header("Location: $logoutGoTo");
> exit;
> }
> }
> ?>
> <?php
> session_start();
> $MM_authorizedUsers = "";
> $MM_donotCheckaccess = "true";
>
> // *** Restrict Access To Page: Grant or deny access to
this page
> function isAuthorized($strUsers, $strGroups, $UserName,
$UserGroup) {
> // For security, start by assuming the visitor is NOT
authorized.
> $isValid = False;
>
> // When a visitor has logged into this site, the Session
variable
> MM_Username set equal to their username.
> // Therefore, we know that a user is NOT logged in if
that Session
> variable
> is blank.
> if (!empty($UserName)) {
> // Besides being logged in, you may restrict access to
only certain
> users
> based on an ID established when they login.
> // Parse the strings into arrays.
> $arrUsers = Explode(",", $strUsers);
> $arrGroups = Explode(",", $strGroups);
> if (in_array($UserName, $arrUsers)) {
> $isValid = true;
> }
> // Or, you may restrict access to only certain users
based on their
> username.
> if (in_array($UserGroup, $arrGroups)) {
> $isValid = true;
> }
> if (($strUsers == "") && true) {
> $isValid = true;
> }
> }
> return $isValid;
> }
>
> $MM_restrictGoTo = "index.php";
> if (!((isset($_SESSION['MM_Username'])) &&
> (isAuthorized("",$MM_authorizedUsers,
$_SESSION['MM_Username'],
> $_SESSION['MM_UserGroup'])))) {
> $MM_qsChar = "?";
> $MM_referrer = $_SERVER['PHP_SELF'];
> if (strpos($MM_restrictGoTo, "?")) $MM_qsChar = "&";
> if (isset($QUERY_STRING) &&
strlen($QUERY_STRING) > 0)
> $MM_referrer .= "?" . $QUERY_STRING;
> $MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar .
"accesscheck=" .
> urlencode($MM_referrer);
> header("Location: ". $MM_restrictGoTo);
> exit;
> }
> ?><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML
4.01//EN"
> "
http://www.w3.org/TR/html4/strict.dtd">
> <html>
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
> <title>Registrasi</title>
> <link href="css/stylesnew.css" type="text/css"
media="screen"
> rel="stylesheet">
> 
> <style type="text/
> ........
>
> how i can get username that user entered(login page) in
new page ?
> pls help me i'm just new bie....
> tks 4 kind attentions,
>
> regds
>
>
>
>
>
>

Pls help me about Runtime.getRuntime().exec("java...")

I have two applications. One is Client, the other is Platform.
In the Platform, there are source files packaged into a library named ZtConfig.jar used by Client. If run Client and Platform, two applications can execute normally.
But if Client is started by user from platform, there is something wrong.
I noticed the error difficultly with finally catching exception.
I was puzzled. It is so strange. Pls help me. I list some codes here.
In Client where finally exception catched:
import zt.config;
        try {
          xmlFileUrl = new java.net.URL(
              "file:///e:/Client/src/config/nsr1000.xml");
        catch (IOException ex1) {
          FileLogger.error(ex1.getMessage());
        FileLogger.info("NSR1000Document.setIEDContent", xmlFileUrl.toString());
        try {
          xmlLoader = new XMLConfigLoader(xmlFileUrl);
        finally {
          FileLogger.error("NSR1000Document.setIEDContent",
                           "cannot new XMLConfigLoader object");
          return; // the following codes cannot execute, so have to return here.
In the XMLConfigLoader, the constructor is
public XMLConfigLoader(java.net.URL xmlFileUrl) {
    this.xmlFileUrl = xmlFileUrl;
    configDoc = null;
    builder = null;
    xmlDoc = null;
Platform start Client application using the following code
Runtime.getRuntime().exec(
                "java -jar e:/Client/Client.jar");

I've got it!
Briefly, it is because classpath setting was overwritten by JBuilder.
Firstly, I start Platform from JBuilder. In its messages window. The command is
d:\j2sdk1.4.2_06\bin\javaw -classpath "JBPATH" zt.client.nsr1000.NSR1000App
Now, classpath environment variable was changed to be JBPATH. While I start
Client use Runtime.getRuntime().exec("java -jar Client.jar"), it will not run for classpath changed.
Then, I configured all packages used by Client into JBuilder libraries, including
Client.jar. And changed codes Runtime.getRuntime().exec("java -jar Client.jar") to be Runtime.getRuntime().exec("java -Xmx128m zt.client.nsr1000.NSR1000App")
I also changed CLASSPATH windows system environment variable.
I found this from command console, it can display exceptions. But from JBuilder, there is no exception that can be captured. So debug is difficult.

Pls help me about two java virtual machine

have two applications. One is Client, the other is Platform.
In the Platform, there are source files packaged into a library named ZtConfig.jar used by Client. If run Client and Platform, two applications can execute normally.
But if Client is started by user from platform, there is something wrong.
I noticed the error difficultly with finally catching exception.
I was puzzled. It is so strange. Pls help me. I list some codes here.
In Client where finally exception catched:
import zt.config;
        try {
          xmlFileUrl = new java.net.URL(
              "file:///e:/Client/src/config/nsr1000.xml");
        catch (IOException ex1) {
          FileLogger.error(ex1.getMessage());
        FileLogger.info("NSR1000Document.setIEDContent", xmlFileUrl.toString());
        try {
          xmlLoader = new XMLConfigLoader(xmlFileUrl);
        finally {
          FileLogger.error("NSR1000Document.setIEDContent",
                           "cannot new XMLConfigLoader object");
          return; // the following codes cannot execute, so have to return here.
        }In the XMLConfigLoader, the constructor is
public XMLConfigLoader(java.net.URL xmlFileUrl) {
    this.xmlFileUrl = xmlFileUrl;
    configDoc = null;
    builder = null;
    xmlDoc = null;
}Platform start Client application using the following code
Runtime.getRuntime().exec(
                "java -jar e:/Client/Client.jar");

I've got it!
Briefly, it is because classpath setting was overwritten by JBuilder.
Firstly, I start Platform from JBuilder. In its messages window. The command is
d:\j2sdk1.4.2_06\bin\javaw -classpath "JBPATH" zt.client.nsr1000.NSR1000App
Now, classpath environment variable was changed to be JBPATH. While I start
Client use Runtime.getRuntime().exec("java -jar Client.jar"), it will not run for classpath changed.
Then, I configured all packages used by Client into JBuilder libraries, including
Client.jar. And changed codes Runtime.getRuntime().exec("java -jar Client.jar") to be Runtime.getRuntime().exec("java -Xmx128m zt.client.nsr1000.NSR1000App")
I also changed CLASSPATH windows system environment variable.
I found this from command console, it can display exceptions. But from JBuilder, there is no exception that can be captured. So debug is difficult.

Pls help.. java engine is not working

Dear All
when i type SXMB_IFR, i am getting error as below.. pls help how to enable the java engine.. to get into XI Java Stack.
Error
500 Internal Server Error
Exception
An internal error occurred. Contact you XI administrator
java.lang.NoClassDefFoundError
Error Details, Error History, Build Info, Generic Application Info

Hi,
You can also check if the address and logon data of the Integration Builder is correctly maintained in the
Exchange Profile (http://<IntegrationServer>:<port>/exchangeProfile/index.html
also check if Tcode SLDCHECK works fine.If its a new installation please check if all the post installation steps
are performed correctly.
Regards,
Srinivas

Pls help.. Issue with plug in installation

I am facing some issues in installing pulgins with flex
builder3 through updater.
Actually i am trying to install updates from flex builder for
UML diagramming tools.
After installing all the required packages, still the feature
is not visible in the IDE.
When i tried to see the problem. i noticed that the installed
plugins are in disabled state. i cudnt see the option to enable.
so anybody pls help me in that..
Packeages i have added are: MDT, JDT, EMF, GMF, GEF

I set up a new admin user account, logged in, but the problem persists.
I take this to mean that you still can't mount any downloads. What you're saying is that you can't mount any .dmg file by double-clicking on it. Is that correct? If so, see http://docs.info.apple.com/article.html?artnum=75098 and http://docs.info.apple.com/article.html?artnum=106692 for potential fixes. One other thing to try is reinstall the 10.4.3 Combo update before trying to reinstall Safari or the entire OS.

Hp laserjet p1102 not connect

I am having trouble with my printer. I am trying to connect my Samsung tablet, the printer blue light blinks but I can't connect. The printer is new, so is the tablet.

Hi @pboughen ,
Welcome to the HP forums.
I understand that you are having a problem connecting your p1102 to your Android device.
I would like to help.
The blue light on the printer is the wireless light.
The fact that it is blinking tells us that the printer is not on a wireless network .
The P1102w is USB to wireless setup.
Do you have a Mac or PC on hand to set the printer up?
Setting Up the Printer for a Wireless Network for the HP LaserJet Pro P1102w Printer
Once the printer in on the network, it should be easy to connect the tablet.
If I may recommend, take a moment and set up the printers ePrint feature.
Getting Started with ePrint for the HP LaserJet Pro P1102w Printer
Go into the Google Playstore, search for the HP ePrint app, and install the app.
This will act like the printers driver for the tablet.
You just have to go into the app and then open the document or picture you would like to print.
Getting Started with HP ePrint Mobile Apps
I hope this helps.
Please let me know if you need further assistance.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Pls help - colour management suite does not activate

Have the following problem with the bridge colour management properties opening:-
am in Bridge CS4-
inside dropdown menu "creative suite-colour management"
photoshop and illustrator are installed and in use
I cannot open this menu section as I get the following error code:-
This is my translation of the german as I have a german system - suite only possible when one of these programs have been started and in use.
So I cannot start this programm section, pls let me know what I can do. Both my programs ahve been started and have been used more than once.
Thks for the help, the adobe people cannot help me

Hi Omke,
Tryed both, start up scripts for AI and PS are activated and I also tryed to
refresh teh preferences as explained below....
Seams to be a bigger probleme.
Thanks Charles
Am 19.05.2009 18:49 Uhr schrieb "Omke Oudeman" unter <[email protected]>:
do you have both the start up scripts checked for AI and PS in the Bridge
preferences.
And have you already tried to restart Bridge holding down option key to
refresh the preferences?
>

Pls Help! My content does not display!!

Hi
The customised content i have cretaed does not display.
I created an URL iview. I created a page and added the iview to the pager. I then cretaed a role, within the role editor i created a folder(Test) and then added the page to the role. I assigned myself the role.
Opened up a new session, Test does not exists in the navigation bar.
How do i get it to display ?

Hi,
You must make either the role, or the folder that you've created inside of it, an entry point.
When you are looking at your role in the editor (where you add pages, iviews etc to your role) you will see on the right hand side of the page some propeties. Select 'Show All' and then change 'Entry Point = No' to 'Entry Point = Yes'. Or you can select your folder, press the 'Properties' button, now the properties on the right hand side are for the folder inside the role, not the role. Here you can make the folder the entry point if you like.
Everything inside an entry point is visible, whether or not it's own 'Entry Point' property is selected as 'Yes'. This means that if you make the role and 'Entry Point' everything that you add to the role will be visible.
I hope it helps,
Patrick.

Pls help ? about snapshot,urgent!

first i create a database link remote_connect,and test it,it's active;
then i create a snapshot log on remote master table:table_one, table_one has it's primary key(id), and last i create snapshot in local like this:
create snapshot local_table_one
storage(initial 100k next 100k pctincrease 0)
tablespace snaps
refresh fast
as
select * from table_one@remote_connect;
but the errors occur:
ORA-12014: 1m'TABLE_ONE'2;0|:,Vw9X<|WVT<JxLu<~(table 'table_one' not include primary key check condition);
my question is:
how can i do for this,i want use primary key not rowid:
thanks first!

This problem occurs when you try to create a snapshot with using WITH PRIMARY KEY option, and the Master table either doesn't have primary key or the primary key is disabled.
If you don't want to use WITH ROWID option, you'll have to check your master table.
Either create a primary key or enable it if already exists on the Master table.
Hope this will help
Faheem

Pls help: SYSVOL and NetLOGON share not ready after creating first Windows 2012 DC

Hi all,
I'm setting up the first DC on Windows server 2012 following steps here (social.technet.microsoft.com/wiki/contents/articles/12370.step-by-step-guide-for-setting-up-a-windows-server-2012-domain-controller.aspx).
DCdiag gives following errors in SysVolCheck, services, and Netlogons while the rest of tests are successful:
------------------------- cut here --------------------------
      Test omitted by user request: DFSREvent
      Starting test: SysVolCheck
         * The File Replication Service SYSVOL ready test
         [ORT001C] An net use or LsaPolicy operation failed with error 67, The network name cannot be found..
         The registry lookup failed to determine the state of the SYSVOL. The error returned was 0x43
         "The network name cannot be found.". Check the FRS event log to see if the SYSVOL has successfully been
         shared.
         ......................... ORT001C failed test SysVolCheck
[snipped]
     Starting test: Services
        Could not open Remote ipc to [ort001c.ad1.mydomain]: error 0x43 "The network name cannot be found."
        ......................... ORT001C failed test Services
[snipped]
      Starting test: NetLogons
         * Network Logons Privileges Check
         [ORT001C] An net use or LsaPolicy operation failed with error 67, The network name cannot be found..
         ......................... ORT001C failed test NetLogons
------------------------- cut here --------------------------
Some information collected:
----------------------- cut here --------------------
- net share
Share name   Resource                        Remark
C$           C:\                             Default share
IPC$                                         Remote IPC
ADMIN$       C:\Windows                      Remote Admin
NETLOGON     C:\Windows\SYSVOL\sysvol\ad1.mydomain\SCRIPTS
Logon server share
SYSVOL       C:\Windows\SYSVOL\sysvol        Logon server share
The command completed successfully.
dnslint /ad /s <DC IP>:   no error
- nltest /server:ort001c.ad1.mydomain /dsgetdc:AD1.MYDOMAIN
           DC: \\ort001c.ad1.mydomain
      Address: \\192.168.1.77
     Dom Guid: 9faa9bae-faae-42be-bf45-05a1d77b2bf0
     Dom Name: ad1.mydomain
Forest Name: ad1.mydomain
Dc Site Name: Default-First-Site-Name
Our Site Name: Default-First-Site-Name
        Flags: PDC GC DS LDAP KDC TIMESERV WRITABLE DNS_DC DNS_DOMAIN DNS_FOREST CLOSE_SITE FULL_SECRET WS DS_8 DS_9
The command completed successfully
- repadmin /showrepl
Repadmin: running command
/showrepl against full DC localhost
Default-First-Site-Name\ORT001C
DSA Options: IS_GC
Site Options: (none)
DSA object GUID: ff4092a2-62d8-4b83-a4d4-fec6920d8535
DSA invocationID: ff4092a2-62d8-4b83-a4d4-fec6920d8535
- netdom query /domain:AD1 fsmo
Schema master
ort001c.ad1.mydomain
Domain naming master
       ort001c.ad1.mydomain
PDC
ort001c.ad1.mydomain
RID pool manager
ort001c.ad1.mydomain
Infrastructure master
      ort001c.ad1.mydomain
The command completed
successfully.
----------------------- cut here --------------------
Besides, DFSR instead of FRS is used.
Sorry that I'm newbie to Windows and afraid if I've anything missed.   Would anyone please help?
Thanks a lot.
/ST Wong

Hi all,
Thanks for your advice. I updated following settings and restart the server:
- IPv6: set both address/DNS to dynamic
- IPv4: Add 127.0.0.1 as alternate DNS server
Same error reported in dcdiag. Besides, the server name used by nslookup is Unknown.
I'm afraid if I've something missed :(
Sorry for the trouble caused. Thanks a lot.
Regards,
/ST Wong
--------------- cut here ---------------
C:\Users\Administrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : ort001c
Primary Dns Suffix . . . . . . . : ad1.mydomain
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : ad1.mydomain
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connectio
n
Physical Address. . . . . . . . . : 00-50-56-AA-1C-6D
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::dd03:5eec:b396:a323%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.77(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 302010454
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-57-D0-61-00-50-56-AA-1C-6D
DNS Servers . . . . . . . . . . . : 192.168.1.77
127.0.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{598372EC-A809-493B-8E25-004F6D4655E2}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
C:\Users\Administrator>nslookup ort001c.ad1.mydomain
Server: UnKnown
Address: 192.168.1.77
Name: ort001c.ad1.mydomain
Address: 192.168.1.77
C:\Users\Administrator>nslookup ad1.mydomain
Server: UnKnown
Address: 192.168.1.77
Name: ad1.mydomain
Address: 192.168.1.77
PS C:\Users\Administrator> dcdiag
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = ort001c
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\ORT001C
Starting test: Connectivity
......................... ORT001C passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\ORT001C
Starting test: Advertising
......................... ORT001C passed test Advertising
Starting test: FrsEvent
......................... ORT001C passed test FrsEvent
Starting test: DFSREvent
......................... ORT001C passed test DFSREvent
Starting test: SysVolCheck
[ORT001C] An net use or LsaPolicy operation failed with error 67, The network name cannot be found..
......................... ORT001C failed test SysVolCheck
Starting test: KccEvent
......................... ORT001C passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... ORT001C passed test KnowsOfRoleHolders
Starting test: MachineAccount
Could not open pipe with [ORT001C]:failed with 67: The network name cannot be found.
Could not get NetBIOSDomainName
Failed can not test for HOST SPN
Failed can not test for HOST SPN
......................... ORT001C passed test MachineAccount
Starting test: NCSecDesc
......................... ORT001C passed test NCSecDesc
Starting test: NetLogons
[ORT001C] An net use or LsaPolicy operation failed with error 67, The network name cannot be found..
......................... ORT001C failed test NetLogons
Starting test: ObjectsReplicated
......................... ORT001C passed test ObjectsReplicated
Starting test: Replications
......................... ORT001C passed test Replications
Starting test: RidManager
......................... ORT001C passed test RidManager
Starting test: Services
Could not open Remote ipc to [ort001c.ad1.mydomain]: error 0x43 "The network name cannot be found."
......................... ORT001C failed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x00001796
Time Generated: 01/14/2014 10:26:57
Event String:
Microsoft Windows Server has detected that NTLM authentication is presently being used between clients and t
his server. This event occurs once per boot of the server on the first time a client uses NTLM with this server.
A warning event occurred. EventID: 0x00000090
Time Generated: 01/14/2014 10:40:03
Event String: The time service has stopped advertising as a good time source.
......................... ORT001C passed test SystemLog
Starting test: VerifyReferences
......................... ORT001C passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : ad1
Starting test: CheckSDRefDom
......................... ad1 passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ad1 passed test CrossRefValidation
Running enterprise tests on : ad1.mydomain
Starting test: LocatorCheck
......................... ad1.mydomain passed test LocatorCheck
Starting test: Intersite
......................... ad1.mydomain passed test Intersite

My ipod touch is not working at all pls HELP, my ipod touch is not working at all pls HELP

My iPod touch is not working at all,i did everything i could and still it doesnt work,i live in the philippines my idea of solving this problem is to send it back at Apple California we do have service centre here but i dont trust them,i dont know what to do,I REALLY NEED YOUR HELP

Quite possibly. It wouldn't hurt to try another one if at all possible. If you have to, borrow one from a friend. It could also be due to debris in the docking port of your iPod. Take a look on the inside of the port and make sure there is no lint or anything like that. Also look for broken pins as they would definitely cause connection issues as well.
B-rock

PLS help me about file access!!

now the file struct is like the bellow:
<root>/db
db.db
<root>/server
RemoteDataImp.java
how to write the code in RemoteDataImp.java to access file db.db??
the code writen bellow is wrong!
dataWrapper = new Data("../db/db.db");

first if this is a file for your database then you need to connected to
the machine and then you make the code that can access this file
if you use windows then all you have to do is go to control panel
and then open Data Sources (ODBC)in User DSN click on Add button
there choose the database driver if you use Access then double click on
that then anther box will popup there in Data Source Name write the name
of the file or any name let say in your case the name is db.db
then down there you will see a button calls Select click on that
button to select the file you have saved you database in
I will give you an idea about how to call you database files if you use Access
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
public class RemoteDataImp {
private static final String DEFAULT_DRIVER = "sun.jdbc.odbc.JdbcOdbcDriver";
private static final String DEFUALT_CONNECTION_INFO = "jdbc:odbc:db.db";
private PreparedStatement setUserNames,removeUserNames;
private static Connection connection;
public RemoteDataImp(String driver,String info)throws Exception{
    if (driver == null) driver = DEFAULT_DRIVER;
    if (info == null) info = DEFUALT_CONNECTION_INFO;
    Class.forName(driver).newInstance();
    connection = DriverManager.getConnection(info);
    connection.setAutoCommit(true);
public PreparedStatement prepareConnection(String sql) throws Exception{
    return connection.prepareStatement(sql);
public RemoteDataImp()throws Exception {
    this(DEFAULT_DRIVER,DEFUALT_CONNECTION_INFO);
public void saveToDB(/*the user calss which is containing the set and get */ user) throws Exception{
    RemoteDataImp r = new RemoteDataImp();
    if (setUserNames == null) {
       setUserNames = r.prepareConnection("INSERT INTO userTable (USER_ID,NAME,E_MAIL) VALUES(?,?,?)");
     setUserNames.setString(1,user.getUserId());
     setUserNames.setString(2,user.getName());
     setUserNames.setString(3,user.getEmail());
      setUserNames.execute();
ublic void removeFromDB(/*the user calss which is containing the set and get */ user) throws Exception {
    DatabaseConnection d = new DatabaseConnection()
    if (removeUserNames == null) {
   removeUserNames = d.prepareConnection("DELETE FROM userTable WHERE USER_ID =?");
removeUserNames.setString(1,user.getUserId());
    removeUserNames.execute();
public void finalize() throws Throwable {
    try {
      connection.close();
    catch (Exception ex) {
}

Pls Help!! element does not pick data after formatting

Hi,
this is my sample code...
<group name="G_ACQUISITION" dataType="varchar2" source="Q_ACQUISITION">
<element name="acq_date" dataType="varchar2" value="ACQ_DATE"/>
<element name="ACQ_TYPE" dataType="varchar2" value="ACQ_TYPE"/>
<element name="acq_num" dataType="varchar2" value="ACQ_NUM"/>
<element name="transaction_date_entered" dataType="date" value="TRANSACTION_DATE_ENTERED"/>
<element name="ASSET_ID_ACQ" dataType="number" value="ASSET_ID_ACQ"/>
<element name="BOOK_TYP_ACQ" dataType="varchar2" value="BOOK_TYP_ACQ"/>
<element name="trans_type_acq" dataType="varchar2" value="TRANS_TYPE_ACQ"/>
<element name="RETIREMENT_TYPE_CODE" dataType="varchar2" value="RETIREMENT_TYPE_CODE"/>
<element name="DATE_ACQ" dataType="varchar2" value="DATE_ACQ"/>
<element name="COST_VALUE" dataType="number" value="COST_VALUE"/>
<element name="CF_COST_VALUE" dataType="varchar2" value="COST_VALUE" function="CURRENCY_FORMAT" currencyCode="P_CURRENCY_CODE" width="19" />
<element name="CF_type_ACQ" dataType="varchar2" value="CF_type_ACQ"/>
</group>
</group>
<element name="CS_ASSET_COUNT" function="count" dataType="number" value="G_ASSET_MAIN.asset_id"/>
<group name="G_ACQUI" dataType="varchar2" source="Q_ACQUISITION">
<element name="acq_date" dataType="varchar2" value="ACQ_DATE"/>
<element name="ACQ_TYPE" dataType="varchar2" value="ACQ_TYPE"/>
<element name="acq_num" dataType="varchar2" value="ACQ_NUM"/>
<element name="transaction_date_entered" dataType="date" value="TRANSACTION_DATE_ENTERED"/>
<element name="ASSET_ID_ACQ" dataType="number" value="ASSET_ID_ACQ"/>
<element name="BOOK_TYP_ACQ" dataType="varchar2" value="BOOK_TYP_ACQ"/>
<element name="trans_type_acq" dataType="varchar2" value="TRANS_TYPE_ACQ"/>
<element name="RETIREMENT_TYPE_CODE" dataType="varchar2" value="RETIREMENT_TYPE_CODE"/>
<element name="DATE_ACQ" dataType="varchar2" value="DATE_ACQ"/>
<element name="COST_VALUE" dataType="number" value="COST_VALUE"/>
<element name="CF_type_ACQ" dataType="varchar2" value="CF_type_ACQ"/>
<element name="CF_COST_VALUE" dataType="varchar2" value="COST_VALUE" function="CURRENCY_FORMAT" currencyCode="P_CURRENCY_CODE" width="19" />
</group>
In the group G_ACQUI, element CF_COST_VALUE picks data from COST_VALUE correctly, but in the group G_ACQUISITION, the element CF_COST_VALUE carries 0.0
I tried changing the element name to CF_COST_VALUE1 in the group G_ACQUISITION and running, but the problem persisted.
Help!

got the solution.. i changed the element name cost_value in the group G_ACQUISITION to cost and ran the program. it picked data correctly

Pls.. Help me about LaserJet P1102 "not wirelles" - Installation Win 8_64bits

Similar Messages

Maybe you are looking for