Pls help me to remove my eadd on the sign in every time I sign in on my yahoo

how can I remove my email add on the box for sign in after i signed to my yahoo. I describe on the box of sign in...I want it not to be save after i used yahoo.

Welcome to the Apple community.
Staying signed in at iCloud.com is not a problem for me. Try resetting your browser or emptying its cache.

Similar Messages

Pls help in sending multiple resposes after analysing the sequential commands from the device

Hi all
pls help me in sending sequential responses for the different commands. For example,i have to send the response1 for command1 then again host wll send the some other command ,say command 2 after receiving response 1,then again i have to respond to the corresponding command.i m using the pci-6221 card not tradition DAQcard.
regards,
nitin

Hello nitin,
It sounds like you are looking for some examples on how to program your
6221 DAQ board. I highly reccomend taking a look at the LabVIEW
shipping examples that install with the DAQ driver. To access
them, open the NI Example Finder by going to the menu bar of a VI and
selecting Help >> Find Examples...
If you have any specific questions, please feel free to ask!
Eric
DE For Life!

Pls help me in sending sequential responses for the different commands.

Hi all
pls help me in sending sequential responses for the different commands. For example,i have to send the response1 for command1 then again host wll send the some other command ,say command 2 after receiving response 1,then again i have to respond to the corresponding command.i m using the pci-6221 card not tradition DAQcard.
regards,
nitin

Hi,
you need to be more specific. What is your setup?
Obviously, what you need is a command parser. Look this article for the basics. I know it is meant for RT but the concept is there.
Not sure it will help with so few infos: http://zone.ni.com/devzone/conceptd.nsf/webmain/CD63FD0F746B17A686256F090065F572
Dai
Dai
LV 7.1 - WIN XP - RT - FP

I keep getting the following message every time i plug in my Iphone to Itunes on my windows vista computer Itunes was unable to load data class information from sync services. reconnect or try again later. any suggestions pls Mario

I keep getting the following message every time i plug in my Iphone3gs to Itunes on my windows vista computer
Itunes was unable to load data class information from sync services. reconnect or try again later.
any suggestions pls
Mario

The article says that I should upgrade to the latest iTunes. I am on the latest iTunes version.
If you could read just a tiny little bit further, under the "Additional Information" section immediately after that, it says:
If you are still experiencing this issue when syncing, or have not installed Xcode 4 and get this alert:
Follow the troubleshooting steps in Mac OS X v10.5, v10.6: Resetting the SyncServices folder.
If the issue is still unresolved, follow steps in Sync Services: Advanced troubleshooting for contact and calendar syncing.
Have you tried those measures?

Please help me. My YouTube app will not work. Every time I open it says 'cannot connect to youtube'. I have searched for help and tried resetting my settings and rebooting my ipad2 but nothing has solved the issue.

Please help me. My YouTube app will not work. Every time I open it says 'cannot connect to youtube'. I have searched for help and tried resetting my settings and rebooting my ipad2 but nothing has solved the issue.

Yes, I am connected to the Internet through my wifi. Everything is working fine with the e eption of youtube. I have reset all Internet settings and have tried synching to iTunes followed by rebooting. This is all the advice I have found although none of it has been helpful.
Has anyone else encountered this problem?

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

If you are talking about Safari on the iPad, there is no version of Adobe Flash for iOS and there never has been. Clear Safari, close the app and reset the iPad.
Go to Settings>Safari>Clear History and Website Data
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you are talking about Safari on your Mac, you are in the wrong forum. But I would still clear the cache, quit Safari and restart the Mac.

I have had an eMac for a few years. I don't know any of the specs. Every time I try to download or install a new version of itunes or OS I get any number of error messages and cannot complete. Help!!!!

I have had an eMac for a few years. I don't know any of the specs. Every time I try to download or install a new version of itunes or OS I get any number of error messages and cannot complete. Help!!!!

It's best to start with figuring out your eMac model and OS in order to answer the question. This article will help you determine your model:
How to locate the serial number and identify your model
And to get the version of Mac OS that's installed:
From the Apple Menu at the left end of your menu bar, select "About this Mac..."
In the resulting Window, you can see the Mac OS version just under the big "Mac OS X":
If the eMac is older and you have never upgraded the system software, it's possible that your OS version is too old to run the current iTunes. The current version requires OS 10.5 (Leopard)or higher, which is a pay-for system upgrade.

Need help with control system that reduces a flat output signal every time a certain input exceeds given value

I'm having difficulty setting up a closed loop control system that reduces one of my voltage outputs (connected to a high voltage system) by 30% every time a measured voltage exceeds a certain threshold value. I'm using a USB 6229 DAQ. I've been trying to create a waveform that looks like a DC signal, but the only waveforms that I can seem to manipulate while my VI is running are the stock waveform types. Also, I've tried to use a formula node or conditional structure to update the output value every time the measured voltage exceeds a given value, but everything I do reinitializes the output value every time it runs or won't store the previous signal value. I'm using LabVIEW 8.6 and don't have the PID or similar express VI's. I've attached the mess I've got working right now. Can anyone help? I'm really stuck!
Thanks!
Attachments:
HiV step down.vi ‏40 KB
output control.vi ‏100 KB

I'm sorry it's such a mess; I'm still pretty new at this. These are both little driver programs for a larger overall control program.
Output control is meant to send a flat signal to the DAQ whose value can be manipulated while the VI is running. I have the second activated segment merely to check the values being output. I didn't realize I attached a version with a meaningless control...I had a control where the user would put in the stating voltage (the high voltage source has a 1V-100V setting for external control). I've attached this slightly different but equally dysfunctional version. Ideally, I would have liked something like the analog signal generator vi to come with an input wiring for offset on the DC signal. Most of the code was diabled because it is copied from an example; it is largely rubbish. I initially used the DAQ Assistant, but when things weren't working out I switched to putting in each step manually to try to troubleshoot.
As far as HiV step down is concerned, I've tried something different with a nested case structure (if that's the right terminology?), and I've attached that file. I think this problem has been solved, but you never know!
Attachments:
output control slightly different.vi ‏100 KB
HiV step down w case structures.vi ‏44 KB

Every time I sign in, it signs me out immediately. I've tried deleting the opm file and it's unable to do so because "Adobe CC is currently running this file." I've also changed my LAN settings and downloaded something else that was supposed to help me ou

Every time I sign in, it signs me out immediately. I've tried deleting the opm file and it's unable to do so because "Adobe CC is currently running this file." I've also changed my LAN settings and downloaded something else that was supposed to help me out but nothing seems to fix the problem.

I think you'll find that the official Adobe advice here is misguided. First, deleting bits of the program and program data is, as you've noted, perilous and often impossible. Shame on Adobe for doing such a poor job of coding that such steps are needed.
The solution I recommend is as follows:
Restart your Windows machine and boot in "Safe Mode" with networking using the F8 key just as Windows starts.
Go to the Control Panel and select Programs. Find and Uninstall "Adobe Creative Cloud Desktop".
Reinstall it by downloading it from the website https://creative.adobe.com/products/creative-cloud
Restart your machine.
Only in "Safe Mode" are you likely to be able to accomplish these tasks reliably.

PLS HELP ive lost all my data during the upgrade!

Wednesday night i upgraded to ios5 the upgrade seemed to take a long time and hung right at the end of the instalation. A pop up screen appeared saying that i could complete instalation at a later data so i decided to do that. I did back up before the instalation took place.
Now however i cant retrieve any data, everytime i restore it will try for a few minutes then i get this 'itunes could not restore the iphone beacuse the backup was corrupt or not commapible with the iphone that is being restored' then the iphone is wiped and ive lost everything, 4 years of names, photos, contacts, texts everything gone. I then restored the backup directory from a previous backup on time machine, about two days earlier and one from the previous month. I have tried to restore the iphone again with these older backup and its doing the same thing error massage as above.
Can someone pls help me i even went to apple yesterday and they couldnt help they were like 'well you'll just have to start the phone from new'. Thats easier said than done. I have multiple backups on time machine i cant believe they are all corrupt, or is this to do with iTunes?
Help pls!!

Sorry but I think all your current stuff is gone since you restored from an old backup.
Have you ever backup your 5C prior to it being restored? http://support.apple.com/kb/HT1766

Help every time in safari i click on yahoo or new page mackeeper comes up

I have macbook pro using safari when i click on any link mackeeper comes up

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

I recently downloaded DOSBOX (a DOS emulator). I have since uninstalled the file and removed it from my download history, yet every time I use Firefox, I get a pop-up to save the file (re-download) again. How do I fix it?

I recently downloaded DOSBOX (a DOS emulator). I have since uninstalled and removed the file from my system, yet every time I access the net, I get a pop-up to save the file (re-download) again. How do I fix it?

Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Please Help!! "A File I/O Error Has Occurred" every time I try to save...

I'm working on a postcard design for print purposes with several embedded images and text elements. I've saved successfully several times early on, but suddenly, every time I attempt to save, I get the message "A File I/O Error Has Occurred". I need to get this to the printer, but can't make important changes now. HELP!
Thanks,
paul

Crazy! Wasn't saving to a server, but to a 2-gig jump drive. When I saved it to my mac's hard drive, no problem. Is there a short answer to why that happens? I didn't appear to be out of space on the external drive...
Thanks Scott!
paul

I was infected by a virus and this changed proxy config to 127.0.0.1:64727, i removed the virus, but every time i start firefox i find the proxy configuration made by the virus.is there any config file i can change ?

I was infected by a virus (i can't remember the virus name). Antivirus removed it, but i think it changed some config file on FF, 'cause every time i try to restart it , i find it configured to use proxy 127.0.0.1:64727. I change every time the config, i also tried to change the config on the about:config and set network.proxy.type 5 , no port and no network proxy (so it's all on default) . I changed the config on the gui, i removed the config from windows registry ( IE and chrome start normally, with no proxy), but every time i restart FF i find the proxy config there. How can i fix it ?

I had the same problem.
Solution
'''Clear Virus First'''
-clear virus using either anti-virus or manually going into task manager and figuring out which processes are bad.
-If the manual way, go through each process in task manager and right click to "open file location". Depending on where it is located and the name of the process, you can google the process name online to see if it is bad.
-Delete the bad process file and as added security, create a folder using the name of the process so the file can't be recreated later. (example: If I had a virus "3dcr.exe" in folder c:\user, then delete "3dcr.exe" and create a new folder c:\user\3dcr.exe\ )
'''Fix Proxy Settings'''
-If your browser points an proxy server and you can't change the settings because every restart of firefox returns the settings back (even after changing in about:config or prefs.js or options>advanced>network>settings). The answer is to uninstall firefox with all its user preferences and the reinstall it.
*I know it is a bit brute force, but it was the only method I found to work. Just be sure to save your bookmarks first.

"urgent" pls help: How to remove name space form message in call to WS

Hi
I am calling a WS from my BPEL process. In the BPEL process I call the WS by referring to the URI of the WS in the partner link. The process works fine. But I have a problem with the message size. The WS does not accept Message size greater than 16kB.
But my message some time exceeds 16kB when maximum data is handled in the message.
Now I found that the each element in the request contains the namespace which eats up a lot of space.
Is there a way to remove the namespace from individual elements and put it in a common place in the file? This would reduce the file size.
I would like to bring to your notice that the WSDL of the WS that I am referring to does not have any reference of xsd. And also no XSD has been created in my BPLE process for this WS.
Present message
<messages>
<InvokeCallORSNewHI_HELLO_InputVariable>
<part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="parameters">
<HELLO xmlns:ns1="http://abc.def.com/webservices/" xmlns="http://abc.def.com/webservices/">
<ns1:HELLO_DATA>
<ns2:HI_TW xmlns:ns2="http://abc.def.com/webservices/packets">
<ns3:IDENT xmlns:ns3="http://abc.def.com/webservices/fields">400001102/T1-TW17902</ns3:IDENT>
<ns3:HI xmlns:ns3="http://abc.def.com/webservices/fields">400001102/T1</ns3:HI>
<ns3:START_DATE xmlns:ns3="http://abc.def.com/webservices/fields">20080404</ns3:START_DATE>
<ns3:START_TIME xmlns:ns3="http://abc.def.com/webservices/fields">0800</ns3:START_TIME>
<ns3:DURATION xmlns:ns3="http://abc.def.com/webservices/fields">1200</ns3:DURATION>
<ns3:WINDOW_COST xmlns:ns3="http://abc.def.com/webservices/fields">1.113</ns3:WINDOW_COST>
<ns3:LATE_COST xmlns:ns3="http://abc.def.com/webservices/fields">1.75</ns3:LATE_COST>
</ns2:HI_TW>
</ns1:HELLO_DATA>
</HELLO>
</part>
</InvokeCallORSNewHI_HELLO_InputVariable>
</messages>
Expected------------
<HELLO xmlns:ns1="http://abc.def.com/webservices/" xmlns="http://abc.def.com/webservices/">
<ns1:HELLO_DATA>
<ns2:HI_TW>
<ns3:IDENT>400001102/T1-TW17902</ns3:IDENT>
<ns3:HI>400001102/T1</ns3:HI>
<ns3:START_DATE>20080404</ns3:START_DATE>
<ns3:START_TIME>0800</ns3:START_TIME>
<ns3:DURATION>1200</ns3:DURATION>
<ns3:WINDOW_COST>1.113</ns3:WINDOW_COST>
<ns3:LATE_COST>1.75</ns3:LATE_COST>
</ns2:HI_TW>
</ns1:HELLO_DATA>
</HELLO>
Thanks
Buddhadev

Dear Rico
Thanks for replying.
Which XSD are you refering to ;
Is it process XSD or the XSD created for the called WSDL.
As I have stated, no XSD has been created for the Consumed WS. And no XSD reference is present in the WSDL of the WS consumed by me.
Please confirm
Thanks a lot
Buddhadev

Pls help me to remove my eadd on the sign in every time I sign in on my yahoo

Similar Messages

Maybe you are looking for