PLS HELP!!! Need Navi 3.06 german language files (...

Because of very limited HW in holiday I need a direct download link for the 3.06 german language files (with streestnames) for driving and walking.
I have Internet connction, but OVI suite does not run because of very limited HW.
I need the direct download link to the language file to download, tranfer to mobile and install.
PLEASE HELP!!!
Robert
Solved!
Go to Solution.

@Robert_1a
Welcome to the forum!
I know that for English with street names it uses English Female, but not sure if same for German equivalent.
German_TTS
German_F
German_M
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

Need to print in german language in output.

Hi,
       I need to print my vendor address and delivery address in german language (fetching data from database table) in my form.
       How I can achieve this.Please help,
Regards,
Himanshu

Hi,
So i think you should to call fetch the data when your are about to print a form..
best way would be to call a subroutine in a script editor.. this routine will fetch all the data from database table ,, and it wud just like a ABAP form ..
Pls follow the steps,,
1. Create a Z program in SE38, declare all the structure related to data fetching in that,, perform all data selection,, fill these data structure..
2. You should to paste your code within the Form and endform .. Like below:
REPORT Zcall_in_script .
form data_fetch.
all the data retreval part .....
endform.
3. Now in your script ,, to call this form use below syntex,,
/:   PERFORM data_fetch IN PROGRAM Zcall_in_script
/:   USING &w_value1&
/:   USING &w_value2&
/:    CHANGING &w_value3&
/:   CHANGING &w_value4&
/:   ENDPERFORM
4. here you can have the w_value3 & w_value4 as your fetch value .
Edited by: Lokesh Tarey on Jul 26, 2010 2:10 PM

solved pls help needed in creating template

hi frs
i have created a template need some modification to be done my xml output looks like below
off            hours              q1           q2          q3         avg
aaa          10                    1            2            3            2
bbb          20                    2            4             0           3i have done everything but my doubt is while creating avg
to get average i used the following code
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 3?> i have used div 3 but my requirement is like if any thing is 0 for ex if q1= 2 and q2=4 and q3=0 then my formula for avg is like below
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 2?> like wise if we have values like q1=1 ,q2=0 ,q3=0
then
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 1?>how to get it.
pls help.
thanks
basa
Message was edited by:
Badsha
Message was edited by:
Badsha
Message was edited by:
Badsha

Hi,
I dont know the solution for this, but heres a work arround
//create new label some where else in the excel sheet as shown below
Label lblcmbdata;
for(int i=0; i<1000; i++)
             lblcmbdata = new Label(75, i, (i+1)+" satish", format);
             sheet1.addCell(lblcmbdata);
}//set the validation range as shown below
writableCellFeature.setDataValidationRange(75,0,75,1000);
Label cmb = null;
cmb = new Label(0, 1, "Select",format);
cmb.setCellFeatures(writableCellFeature);
sheet.addCell(cmb);this will create a combo list with 1000 values
also you can keep the data to be populated in the different sheet in same workbook by creating a named range as below
workbook.addNameArea("cmbdata", sheet1, 0, 0, 0, 1000);
// then fill the data in sheet1
Label lblcmbdata;
for(int i=0; i<1000; i++)
                lblcmbdata = new Label(0, i, (i+1)+" satish", format);
                sheet1.addCell(lblcmbdata);
//set the validation named range as below
writableCellFeature.setDataValidationRange("cmbdata");
Label cmb = null;
cmb = new Label(0, 1, "Select",format);
cmb.setCellFeatures(writableCellFeature);
sheet.addCell(cmb);Thanks and Regards
Satish

There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor. Pls help, need assistance.

I tried uninstalling my itunes thinking it was perhaps a conflict with the previous version, now I don't have itunes on my pc at all!!
Reading a previous post for this problem, I attempted to uninstall the 6 individual programs from within control panel. Everything uninstalled fine except for the Apple Software Updater which failed to uninstall and gave me the same error message.
I only encountered this when trying to update to the current version of itunes64setup. When using itunes ver 9 on Windows 7, everything was still fine.
Pls help, any assistance would be appreciated.

I have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater. The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.

Pls help me to check the imp par file sytax

hi, buddy:
here is a imp par file for a 8i database:
FROMUSER=(B)
TOUSER=(B)
FILE=${TMP_FS}/XXX_imp
BUFFER=400000000
LOG=XXXXXXX
TABLES=(A.table1, A.table2.......)
IGNORE=N
COMMIT=Y
I import selected tables from schema A, and all objects from B.
is that OK, just double make sure. pls help have a check
thanks a lot
Jerry

Doing a table level import will not import anything other than the tables listed (including database objects like views, packages, etc).
If you want to import all object from schema B into schema B on the target db, and only selected tables from schema A in the source DB, into schema A then you are going to need to do this in 2 steps. First do the import fromuser=B touser=B. Then do the import again with fromuser=A touser=B tables=a.table1, a.table2...

Urgent help needed, can I restore N900 Backup file...

i owned a N900 (now sold out)
before selling i took backup of contacts from backup restore option in application section
now i bought a N8 but i m not able to restore my contacts
1. is there any way to restore them in N8?
2. if not, can i convert them in TEXT or any readable format
urgent help needed
thanks in advance

The backup procedures built into the phone are only designed for restoring to the same phone (ie: in case or data corruption, software update or repair etc.), they can't usually be used to restore to a phone with a different operating system.
You should have backed up with Ovi Suite before selling the N900, that would have been able to restore to the N8.

Pls Help--- URGENT... Combining XML file and HTML file Using java program.

Hi, I need to implemnt this for my project....
I need to combine XML and HTML file and generate a new HTML file
Sample XML File:
<user>
<txtName>sun</txtName>
<txtAge>21 </txtAge>
</user>
Sample HTML File:
<body>
Name: <input type="text" name="txtName" value=""
Age : <input type="text" Age="txtAge" value=""
</body>
I need a java program to combine the above xml and html files and generate the output in HTML.
Any kind of help is sincerely Appreciated.
Thanks.

toucansam wrote:
So you want us to write it for you? It's pretty straight forward, first parse the xml file with the *[best java xml parser|http://www.google.com/search?&q=parsing+xml+in+java]* and then go through the nodes and construct the html with strings and concatination. Then write the file using *[the best java file writer|http://www.google.com/search?hl=en&q=writing+to+a+file+in+java]*.
He would do better to use existing tools that make this easy [http://www.ling.helsinki.fi/kit/2004k/ctl257/JavaXSLT/Ch05.html|http://www.ling.helsinki.fi/kit/2004k/ctl257/JavaXSLT/Ch05.html]

PLS help, need to delete cc informations!

I get charged even for free aps! tired of it and want to delete my credit card infromations!
Please help! I have an iPod, dl iTunes, went to my account, but there no option to delete!

What makes you think yo are getting charged?
Apple will place a temporaty charge, which is shortly refunded, to check the validity of the card. Apple does that for free items too.
iTunes Store & Mac App Store: About credit-card authorization holds

Help needed - OS Command foe deleting a file from Appplication server.

Hi,
I have requirement, where in i need to delete a file from the application server. It has to be done automatically. I thought of using OS Command for achieving the same. Can anyone help me in achieving it. The OS of my application server system is UNIX.
Thanks in advance!!
P.S: Points will be rewarded.

Hello Sudeep,
If you define the command for each operating system using transactions SM69 (You can test it with SM49) and then call it using SXPG_COMMAND_EXECUTE which contains a parameter defining the operating system (SY-OPSYS)
then it does not matter which operating system is running, the function module always calls the correct version of the command.
So, for example you could define a command 'OS_COMMAND'
which deleted a file. This would have one version for Dos
which said 'del', and a second version for unix which said 'rm'.
The correct command would be specified by the call to SXPG_COMMAND_EXECUTE because the operating system parameter differentiates between the two commands.
[USING PROCESS CHAINS IN SAP BW|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0a7cd90-0201-0010-49a1-d730a56895f4]
SXPG_COMMAND_LIST_GET Reads a list of external OS commands
Thanks
Chandran

Help needed in encrypting and decrypting a file

Hello,
I just started looking into the Java Security.I need to encrypt a file using any popular alogrithm like RSA or DES and write it to disk.and again decrypt this file at a later time when needed.
I was checking out with different ways of doing so,but found it difficult to persist the key some where.
Could some one help me in this regard,with a tutorial or a sample program where I will be able to give cleartext file as an input and get a ciphered text file as output and vice versa?

Probably the simplest solution is to use password-based encryption (PBE). See http://java.sun.com/j2se/1.5.0/docs/guide/security/CryptoSpec.html#PBEEx
for an example.

Help needed in executing a remote batch file

I need to execute a batch file which is located on a remote machine through my machine. I have no idea to go about with. Please can someone help me out with can be used to execute the remote bat file. I am at present using Runtime.exec() to execute it on my machine.. But i cant use it to execute teh bat file on teh remote machine.Please help

Below is an example server that would run on the remote host. You can connect to it using telnet from DOS prompt, it takes a Y/N to run your command in the cmd variable. I haven't included code for a client as it's really not needed for the example below.
Change the cmd and port variables to what you need. You may need to setup firewall rules to allow your chosen port.
Once it's running, you can test it by using "telnet localhost 1234" on your machine, localhost would obviously become the remote computer's hostname or IP.
I am incredibly new to Java (using the forums to learn bits), so excuse any bad coding practises, I'm sure people will point them out.
Keep in mind that this is totally insecure, so if you're using it on an untrusted network, you may want to look into encryption and providing some kind of password authentication, that, for the moment is out of my league.
Screenshot here.
import java.io.*;
import java.net.*;
class RemoteServer {
     public static int    port = 1234;           // Port to listen on
     public static String cmd = "C:\\Test.bat"; // Command to run
     public static void main(String[] args)
          System.out.println("Waiting for connection...");
          try {
               /* If you want the server to run forever, uncomment the while
                  loop */
               // while (true)
                    startServer();
          } catch (IOException e) {
               e.printStackTrace();
               System.exit(1);
     /* Starts the server */
     private static void startServer() throws IOException
          ServerSocket server = null;
          Socket       client = null;
          String input;
          try {
               server = new ServerSocket(port);
          } catch (IOException e) {
               System.err.println("Unable to list on port " + port);
               System.exit(1); // Can't listen, nothing else to do
          try {
               client = server.accept();
               System.out.println("Client connected... awaiting Y/N");
          } catch (IOException e) {
               System.err.println("Unable to accept connection.");
               System.exit(1);
          PrintWriter out = new PrintWriter(client.getOutputStream(), true);
          BufferedReader in = new BufferedReader(new InputStreamReader(
                                                 client.getInputStream()));
          out.println("You are connected, ready to launch command: <y/n>");
          while ((input = in.readLine()) != null)
               if (input.equalsIgnoreCase("y"))
                    Runtime rt = Runtime.getRuntime();
                    rt.exec(cmd);
                    out.println("Command executed... disconnecting.");
                    System.out.println("Command executed... disconnecting client.");
                    break;
               } else if (input.equalsIgnoreCase("n")) {
                    break;
               } else {
                    out.println("Please enter Y/N.");
          out.close();
          in.close();
          client.close();
          server.close();
}

Help needed for creating a SQLLoad control file

I have 2 fields in my flat file
If field1 = field2 load only field1 into tn and aux = NULL
else if field1 != field2 load field1 into tn and field2 = aux
Here is what I have so far - I need help with the "Where"
-- ActiveNumbers.dat
-- Steve J
load data
INFILE 'active.date'
INTO TABLE tmp_ac_active
APPEND
FIELDS TERMINATED BY '|'
(tn CHAR(10), aux CHAR(10))
Thanks in advance
Steve

Thanks Joel
Using the document you provided here is what I came up with. I notice this is 9i documents - I'm on 8. Does the SQLLoader work the same in both versions?
This is the first time I've used this tool - No one here has even heard of it. (Well except for the DBA)
load data
INFILE 'active.date'
-- Loads tn and aux if they do not match
INTO TABLE tmp_ac_active
WHEN tn != aux
(tn CHARTERMINATED BY WHITESPACE,
aux CHAR TERMINATED BY WHITESPACE)
-- Loads only TN if both are the same
INTO TABLE tmp_ac_active
WHEN tn = aux
(tn POSITION (1:10) CHAR)

I don't need the thousands of foreign language files. How do I NOT install them?

Why does Adobe insist on barfing thousands of files on the hard drive when many aren't needed by most users. I'm not saying specific ones aren't needed period. I just don't have a need for them. Someone that doesn't speak my language may not need mine. Why are we forced to fill the drive up with this and what is the method for NOT installing them?

This forum is to discuss the forums, not products, and not installing products
Start at http://forums.adobe.com/index.jspa and find the product you have, and ask your question there
But, in general (it has been awhile since I installed CS5 Master Collection, so I don't remember the exact screens) you need to actually read the options on the screen
If you accept the "default" install option, you get just that... if you want a custom install where YOU choose the options, you need to select that and check, or un-check, according to your needs

Help Needed With Conversion of Creative Player2 files to other programs

THR AUG th
I have some picture, graphic and text files that have in some way been saved in the Creative Player2 format on my computer. I need to associate these files with another program so that I can reoer the images and text. Can anyone tell me what program I can use to associate these Creative Player2 files to revover them, or if there is some other way to open them... Desperate for help!!! Thanks in advance. Al [email][email protected]][email protected][/url]

Al_Barrs wrote:
THR AUG th?I have some picture, graphic and text files that have in some way been saved in the Creative Player2 format on my computer. I need to associate these files with another program so that I can reoer the images and text. Can anyone tell me what program I can use to associate these Creative Player2 files to revover them, or if there is some other way to open them... Desperate for help!!! Thanks in advance. Al [email][email protected]][email protected][/url]?
What player are you referring to? Is it Creative PlayCenter 2? Playcenter doesn't save any special extension to the files. It uses all the standard extension. eg. jpg,txt.... Not sure what you are trying to say.

Help needed in converting Excel from XML file

Hi Can anyone help me in converting XML in to Excel.
Thanx,
Ananth.

well, that still isn't much to go off of. I give it a try though.
I guess you want to parse out the relevent data out of the xml file and then decide on your favorite delimated file format for Excel. Two popular formats are comma delimated:
"info1","info2","info3","info4"
and tab delimeted:
info <tab> info2 <tab> info3 <tab> info4
Excel should be able to unsestand either of these formats.

PLS HELP!!! Need Navi 3.06 german language files (...

Similar Messages

Maybe you are looking for