Pls.. Help Needed.. Seeburger Mapping Names..!!

Hi All,
Can any one help me with the default Mapping Program names supplied by SEEBURGER for both inbound and outbound.
EDI Orders
EDI Order Ack/Confirmation outbound
Delivery
Invoice
Also pls clarify below questions if you have an idea.
1. I heard that the XSD's will be already available for all the standard EDI message types.?? If Yes, we can i get them?? I mean which location in the server do i get them.
2. Is it mandatory that i need to use Only AS2 adapter to call the below Seeburger modules.?
Is the below sequence is correct??
Process Sequence :
localejbs/callBicXIRaBean bic
localejbs/ModuleProcessorExitBean exit
Module Configuration :
bic mappingName See_E2X_ORDERS_UN_D96A
exit JNDIName deployedAdapters/OFTP/sharable/OFTP
Thanks in Advance.
Regards
Seema
Message was edited by:
 reddy seema

Hi,
Check some links on Seeburger.
http://www.seeburger.com
Please see the below blogs
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
Check this for Conversions-
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
Regards,
Phani
Reward Points if Helpful

Similar Messages

Need Seeburger Mapping name for DESADV .

Hi All,
I want the Seeburger mapping name for DESADV .
The format of the file is ANSI file.
Also i want the folder name or standard number for DESADV ??
I mean like for Orders the folder name will be " ANSIX12_V3020_850 "
Kindly let me know asap.
Thank You.
Regards
Seema.

Hi,
    These are the few naming conventions that will be followed while doing mapping in SEEBURGER BIC mapping designer.Let me know if they help u in any way..
ADOPTED NAMING CONVENTIONS
1 - For Application Rules:
DOCUMENT_APLLICATION_DIRECTION_DATA (FILE EXTENSION FOR REFERENCE)
Length for each:
Document = 3     Samples of: PUR, POC, POA, ASN, TXT
Application = 4   Samples of: RECL, SOMS, HRMS, CORP, COMS, CONT
Direction = 1       Samples of: I or O
Data = 3              Samples of: DAT, XML, RPT
NOTE: Since spaces are not allowed in the names, S will be used as filler .
Sample Application Naming:
For 824 for Banking doc   TXT_CORP_I_RPT
2 - For Project Rules:
We decided that we would group these by related documents. Ex. All POs would be together.
Following are the Project definitions:
ORDERS (PURCHASING) = 850, 880
BANKING = 820, 824 (Related to the banking 820 only)
TRANSPORTATION = 404, 858, 856, 940, 945, 990, ..
INVOICING = 810, 857
TEXT = 824, 864, 870
INVENTORY = 852, 830, 846,..
3 General Rules:
1- IF mapping is the same with HRMS & COMS
      THEN Use CONT for Application
    ELSE Use HRMS or COMS (which ever is appropriate)
2- IF document is the same for the entire corporation
       THEN Use CORP as the Application
3- IF Generic
      THEN No Suffix is required
     ELSE Trading Partner Specific maps add the suffix
For Trading Partner specific rules, add the Name extension to the end of the rule
Thanks .

Seeburger Mapping Name for ORDERS EANCOM D01B format

Hi Experts,
Can anyone please let me know the Seeburger mapping name for ORDERS_EANCOM_D01B format.
See_E2X_ORDERS_EANCOM_D01B doesn't seem to be working.
Thanks.
Regards,
Shweta

Log on tothe physical system of the XI system, go to the Seeburger folder(Usually found in the D Drive).
Something like D:/Seeburger/HT/EDI Message Catalog/
Then look into the Folder corresponding to your EDI Standard/Message/Version combination.
YOu will find 3 files in the folder.
In that you will find a file name starting with msg_<XXXXXX>
YOu can get an Idea of the Mapping name because the mapping name would then be See_E2X_<XXXXXX>

Seeburger mapping name required for ASN

Hi
I am trying to use the Seeburger AS2 adapter to send ASN (Advance shipping notification) to our partners.
The format of the EDI file is EANCOM2002. I want the standard Seeburger mapping name which will convert from xml to EDI EANCOM2002 format for ASN message.
Thanks in advance.
Shantha

If you are expecting the naming conventions for SEEBURGER Mapping (BIC Mapping designer) here are few .Let me know if they are useful.
ADOPTED NAMING CONVENTIONS
1 - For Application Rules:
DOCUMENT_APLLICATION_DIRECTION_DATA (FILE EXTENSION FOR REFERENCE)
Length for each:
Document = 3 Samples of: PUR, POC, POA, ASN, TXT
Application = 4 Samples of: RECL, SOMS, HRMS, CORP, COMS, CONT
Direction = 1 Samples of: I or O
Data = 3 Samples of: DAT, XML, RPT
NOTE: Since spaces are not allowed in the names, S will be used as filler .
Sample Application Naming:
For 824 for Banking doc TXT_CORP_I_RPT
General Rules:
1- IF mapping is the same with HRMS & COMS
 THEN Use CONT for Application
 ELSE Use HRMS or COMS (which ever is appropriate)
2- IF document is the same for the entire corporation
 THEN Use CORP as the Application
3- IF Generic
 THEN No Suffix is required
 ELSE Trading Partner Specific maps add the suffix
For Trading Partner specific rules, add the Name extension to the end of the rule.

Help needed in Mapping servlet in web.xml file

Hi Can anyone please tell me what am doing wrong here. I can't see this servlet in my url. Please help.
<servlet>
<servlet-name>HelloWorld</servlet-name>
<servlet-class>HelloWorld</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>HelloWorld</servlet-name>
<url-pattern>/com/jci/fi/application/eems/HelloWorld/*</url-pattern>
</servlet-mapping>
package com.jci.fi.application.eems;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class HelloWorld extends HttpServlet {
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws IOException, ServletException
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("<html>");
out.println("<body>");
out.println("<head>");
out.println("<title>Naveen Wants to goto TollyWood......!</title>");
out.println("</head>");
out.println("<body>");
out.println("<h1>Hello World!</h1>");
out.println("</body>");
out.println("</html>");

your web.xml shoould be something like this...
<servlet>
<servlet-name>HelloWorld</servlet-name>
<servlet-class>com.jci.fi.application.eems.HelloWorld</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>HelloWorld</servlet-name>
<url-pattern>HelloWorld</url-pattern>
</servlet-mapping>
Hope this helps..
CK

solved pls help needed in creating template

hi frs
i have created a template need some modification to be done my xml output looks like below
off hours q1 q2 q3 avg
aaa 10 1 2 3 2
bbb 20 2 4 0 3i have done everything but my doubt is while creating avg
to get average i used the following code
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 3?> i have used div 3 but my requirement is like if any thing is 0 for ex if q1= 2 and q2=4 and q3=0 then my formula for avg is like below
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 2?> like wise if we have values like q1=1 ,q2=0 ,q3=0
then
<?(xdoxslt:get_variable($_XDOCTX,'Q1_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q2_COUNT')+xdoxslt:get_variable($_XDOCTX,'Q3_COUNT')
+xdoxslt:get_variable($_XDOCTX,'Q4_COUNT')) div 1?>how to get it.
pls help.
thanks
basa
Message was edited by:
Badsha
Message was edited by:
Badsha
Message was edited by:
Badsha

Hi,
I dont know the solution for this, but heres a work arround
//create new label some where else in the excel sheet as shown below
Label lblcmbdata;
for(int i=0; i<1000; i++)
 lblcmbdata = new Label(75, i, (i+1)+" satish", format);
 sheet1.addCell(lblcmbdata);
}//set the validation range as shown below
writableCellFeature.setDataValidationRange(75,0,75,1000);
Label cmb = null;
cmb = new Label(0, 1, "Select",format);
cmb.setCellFeatures(writableCellFeature);
sheet.addCell(cmb);this will create a combo list with 1000 values
also you can keep the data to be populated in the different sheet in same workbook by creating a named range as below
workbook.addNameArea("cmbdata", sheet1, 0, 0, 0, 1000);
// then fill the data in sheet1
Label lblcmbdata;
for(int i=0; i<1000; i++)
 lblcmbdata = new Label(0, i, (i+1)+" satish", format);
 sheet1.addCell(lblcmbdata);
//set the validation named range as below
writableCellFeature.setDataValidationRange("cmbdata");
Label cmb = null;
cmb = new Label(0, 1, "Select",format);
cmb.setCellFeatures(writableCellFeature);
sheet.addCell(cmb);Thanks and Regards
Satish

Help Needed in mapping business scenario

Hi All,
I have a RM inter unit despatches for this we are using STO. While doing inter unit despatches we have to pay freight on per kg (Gross Weight) for a source and destination. This has already been mapped by creating a condition type and condition record.
But there is a scenario where in when inter unit despatches happens there is an agreement b/w transporter and company if the company does not load full truck then the company needs to pay a minimum amount which has been negotiated with the transporter in this case, the freight condition is not being payed only minimum gurantee amount is payed to the transporter.
Could any of us help me in mapping only the minimum gurantee scenario in R/3.
We are using STO to do inter unit despatches.
Regards,
Sreekanth

hai
i think u can use condition type AMIW

There is a problem with this windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor. Pls help, need assistance.

I tried uninstalling my itunes thinking it was perhaps a conflict with the previous version, now I don't have itunes on my pc at all!!
Reading a previous post for this problem, I attempted to uninstall the 6 individual programs from within control panel. Everything uninstalled fine except for the Apple Software Updater which failed to uninstall and gave me the same error message.
I only encountered this when trying to update to the current version of itunes64setup. When using itunes ver 9 on Windows 7, everything was still fine.
Pls help, any assistance would be appreciated.

I have also tried extracting the individual components to the temp file and attempting to install them individually despite being unable to remove the previous install of Apple Software Updater. The outcome, both Apple Software Updater and itunes encountered the same error message during the install process.

Help needed with Map function in Lumira

Hi,
I've bee using Luira for lots of great tile charts and bar charts, but now I am looking to make use of the mapping visulization in Lumira.
Bascially I want to get a count of the number of retail stores by state.
I uploaded my data , and some have been populated and looks nice (see first screenshot) , but for others the state is not found (see second screenshot).
I have looked in the help documents, and some of the training, but have yet to find a solution.
What I'd like to know is how I can fix the "unfound" states, or at least find out what is the source file which stores all the states?
Above is the results so far, below is the missing states that I need to resolve. How can I fix for these "not found" states or compare the format of my original excel data vs the data from Lumira.
Alteratively if there is a way to match via post-code / zip-code please tell me how.
Thanks,
Paul

Hi Paul,
the geo-hierarchies take all cities that are greater than 100.000 for the name resolution and for the smaller ones you would need to use latitude/longitude information to get them resolved by Lumira.
You can find mre information on how to use latitude/ longitude information from here:
https://scn.sap.com/docs/DOC-33118
Regards,
Clarissa

Help needed on mapping information for AT701 element in EDI X12 214 Transportation type (X12_00401_214 schema)

Hi all,
As per the EDI defined standard schema, AT701 element takes the following Enumeration values.
<xs:element minOccurs="0" name="AT701" type="X12_ID_1650">
<xs:annotation>
<xs:appinfo>
<b:fieldInfo notes="Shipment Status Code_1650" />
</xs:appinfo>
</xs:annotation>
</xs:element>
<xs:simpleType name="X12_ID_1650">
<xs:restriction base="xs:string">
<xs:enumeration value="A3" />
<xs:enumeration value="A7" />
<xs:enumeration value="A9" />
<xs:enumeration value="AF" />
<xs:enumeration value="AG" />
<xs:enumeration value="AH" />
<xs:enumeration value="AI" />
<xs:enumeration value="AJ" />
<xs:enumeration value="AM" />
<xs:enumeration value="AN" />
<xs:enumeration value="AP" />
<xs:enumeration value="AR" />
<xs:enumeration value="AV" />
<xs:enumeration value="B6" />
<xs:enumeration value="BA" />
<xs:enumeration value="BC" />
<xs:enumeration value="C1" />
<xs:enumeration value="CA" />
<xs:enumeration value="CD" />
<xs:enumeration value="CL" />
<xs:enumeration value="CP" />
<xs:enumeration value="D1" />
<xs:enumeration value="I1" />
<xs:enumeration value="J1" />
<xs:enumeration value="K1" />
<xs:enumeration value="L1" />
<xs:enumeration value="OA" />
<xs:enumeration value="OO" />
<xs:enumeration value="P1" />
<xs:enumeration value="PR" />
<xs:enumeration value="R1" />
<xs:enumeration value="RL" />
<xs:enumeration value="S1" />
<xs:enumeration value="SD" />
<xs:enumeration value="X1" />
<xs:enumeration value="X2" />
<xs:enumeration value="X3" />
<xs:enumeration value="X4" />
<xs:enumeration value="X5" />
<xs:enumeration value="X6" />
<xs:enumeration value="X8" />
<xs:enumeration value="XB" />
</xs:restriction>
</xs:simpleType>
Now, in my sample input file I am having a column "MileStone", and for example: If I have
"Picked Up Date" in that column, I need to pass "A3" as the value for
AT701 element as per the above code snippets.
Please let me know how to map the "Milestone to "AT701" element.
If I straight away map those two fields, I am getting the below error :
error btm1046: Output validation error: The 'AT701' element is invalid - The value 'MileStone_0' is invalid according to its datatype 'http://schemas.microsoft.com/BizTalk/EDI/X12/2006:X12_ID_1650' - The Enumeration constraint failed.
So, please guide me on how to map the above fields using the functoids.
Thanks in Advance..

Hi Anand,
You can try
Value Mapping functiod along with Logical Equal functiod for this requirement.
Connect the element “MileStone”
to the Logical Equal functiod as the it’s first parameter. And add “Picked Up Date”
as the second parameter.
Connect output of the Logical Equal functiod as the first parameter to the Value Mapping functiod and “A3"
as the second parameter.
Connect the output of
Value Mapping functiod “AT701”
element.
This maps the value “A3”
to the element “AT701”, if the value of “MileStone” element is
“Picked Up Date”
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Help needed in Mapping of T4s and T4As

Hi
My name is Krishna ,I was involved in year end support of US and successfully completed it ,but now i am put in canadian year end stuff also (T4s and T4As) and i dont have much experience with Mapping and Testing of T4s and T4As using tax reporter of SAP .can any body help me How to map different wagetypes on different boxes on T4s and T4As ?please if you have any screenshots,please send me .your timely help is greatly appreciated
Regards
Krishna

Hi Krishna,
What is T4 and T4A'S? Do they spcify the Tax form groups or Tax form fields?
I think it must be like Box 12 of W-2 wherein you have 12A, 12B, 12C.
Try to apply to the same logic for the T4's and T4A's.
Let me know.
Arti

Help needed - Field Mapping

Hi,
Detail:
========
I have a class called CustomerSpecificField extending another class
NameValueTimestamp which contains 3 attibutes name, value, timestamp.
In my package.jdo file when i tried to map my fields, I got the following
exception. the attibutes in the parent class are not at all recognized for
mapping.
JDO Info
========
<class name="CustomerSpecificField">
<extension vendor-name="kodo" key="jdbc-class-map" value="base">
<extension vendor-name="kodo" key="table" value="ADB.UP_CUST_SPEC_FIELD"/>
<extension vendor-name="kodo" key="pk-column" value="ID"/>
</extension>
<field name="name">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="NAME"/>
</extension>
</field>
<field name="timestamp">
<extension vendor-name="kodo" key="jdbc-field-map" value="value">
<extension vendor-name="kodo" key="column" value="TIMESTAMP"/>
</extension>
</field>
</class>
Error:
=======
Exception in thread "main" kodo.util.FatalException: java.io.IOException:
org.xml.sax.SAXException:
file:/C:/kodo-jdo-3.1.3/bin/com/bo/package.jdo [Location: Line: 65, C:
37]: Field "timestamp
" is not declared in "CustomerSpecificField".
[java.lang.NoSuchFieldException]
NestedThrowables:
java.io.IOException: org.xml.sax.SAXException:
file:/C:/kodo-jdo-3.1.3/bin/com/bo/package.jd
o [Location: Line: 65, C: 37]: Field "timestamp" is not declared in
"CustomerSpecificField". [java.l
ang.NoSuchFieldException]

I have a class called CustomerSpecificField extending another class
NameValueTimestamp which contains 3 attibutes name, value, timestamp.In JDO, each class can only persist fields that it declares. So you
need to make your superclas a persistent class and map it, and reference
it with the persistence-capable-superclass attribute from your subclass.

Help needed to "map" HRMS fields for reporting

Hi all,
I have been asked to map for reporting purposes all the fields in the HRMS person and assignment forms, plus vacany requisition and absence.
For example, on the people form in HRMS the "last Name" field would translate into sql as "per_people_F.last_name".
I have found all the person/assignment/absence and vacancy fields but cannot find any of the following:
Bank account/ pay method information.
Salary previous/ salary proposal form information
Anything from the element entries screen or the tax information fields.
Anyone have any ideas which tables would hold this information for querying using developer or toad??

Hi Michel, Vijaya, Praksh
Thanks for all the replies. I will be a bit more detailed in my Query and Vijaya if u cud explain me the same way then it wud be helpful...
Idoc Structure:
GLMAST01
IDOC
BEGIN
--EDI_DC40
     SEGEMENT
    TABNAM
--E1SKA1M
     SEGMENT
    MSGFN
    KTOPl
    SAKNR
--E1SKATM
     SEGMENT
     MSGFN
--E1SKB1M
     SEGMENT
     MSGFN
The Message type is
FCC_MSGTYPE
-MOVEMENT
-Row
    MANDT
    KTOPL
    SAKNR
I am not sure whether to Map the MOVEMENT part. Tell me what I should do. The requirement is to populate the R/3 with the MANDT, KTOPL, SAKNR etc which all occur in the E1SKA1M segemnt and the nothing to the subsegments under it.
Please tell me how to do that.
Thanking all in anticipation.
Best Regards
Chakra and Somnath

Help needed in mapping BI query output to use as input for BAPI

Hi,
After wrestling with it for quite some time I choose to ask yet another question here. I want to use the output of a BI query I use as input for a BAPI. I just can not get the mapping correctly:
The query delivers: 104908BA092F7501F5E1008000829000AC
I need: 104908BA092F7501F5E1008000829000AC
How can I lose the two first digits? Thanks in advance!
Best regards,
Jan

Nevermind. I found out myself. I am now using the statement MID(@GUID,2,32) in the connection.

Help needed on Mapping logic

Hi guys,
I have logic like,
pernr>logic>pernr.
Pernr is the first field.
Whenever the logic fails, it should not process rest of the below fields.
it should directly go to next record.
Any ideas.......
santosh.

You can achieve this using gloval variable.
1. right click on the parent node of pernr. -
>Add Variable (say ifPernrTrue)
2. Map this variable with the same logic and give value "true" if logic successful and "false" if logic fails
Whenever the logic fails, it should not process rest of the below fields.
3.Map rest of fields as :
ifPernrTrue (the variable u created) \
> if (without else ) -
> fields...
source filed /

Pls.. Help Needed.. Seeburger Mapping Names..!!

Similar Messages

Maybe you are looking for