PLS HELP: Video not showing up when inserting into timeline

hi everyone:
I recorded DV footage into FCP6. I have the DV footage opened in viewer and I set the in and out points. I drag the viewer footage into the timeline. But only the audio shows up in the time line.
How do I enable it so video can be inserted again?
I did some research and I'm aware there is the v1, a1, a2 on the left side of the timeline bar. If you disconnect v1, a1, or a2 it won't import into timeline on insert. However, even though I have v1 connected to v1 the video still won't show.
May someone help? This project is time sensitive.
Thanks ahead of time.

hey Capt,
It everything was recorded properly. Video and audio was captured while doing log and capture.
I was ediiting and I could insert video and audio files fine. Then I just created a new sequence and now it only inserts audio not video. I tried to insert video in my previous sequences that had video but now video can't be inserted either.
Did I hit some sort of key on the keyboard by accident that disabled the video insert?
Yes the v1 is connected to v1, it is both snapped together when I import video so I don't understand why FCP is not importing video from my sequence, unless it's a bug?!

Similar Messages

  • F4 Help list not showing values when a BEx 7x workbook is refreshed

    Hello All,
    Hope you are doing good. I have a very peculiar behaviour with F4 functionality of a variable while refreshing a workbook and thus requesting for your help.
    The workbook contains two queries. Both of these queries contains a common variable (of common characteristic).
    Info_Provider
    Query_Name
    Characteristic_Name
    Variable_Name
    Multi_Provider_1
    Query1
    Char1
    Var1
    Multi_Provider_2
    Query2
    Char1
    Var1
    When Query1 and Query2 are refreshed individually, the variable Var1 (basically a plant variable) shows the help list values.
    But when the workbook is refreshed (that's when both the queries gets executed together with a common variable screen) and
    upon clicking the help list of the variable Var1 doesn't show any values.
    Additional Info:
    1. Both the variables are configured to show data from Master table.
    2. The same set up works fine in 3x and also for other similar variables.
    Has anybody come across of this situation? If so, what is the issue and what was the solution?
    Pls share.
    Thank you.
    Lohith

    We recently had a similar issue with a variable... turns out the RSR_VARIABLE_F4_RESTRICT_BADI BADI was activated for this variable (and the code was no longer "valid" with the current situation).
    You may want to check whether you have that BADI activated.

  • Help topics not showing up when clicked

    For some reason none of the help topics will show up now when I click on them. I click on help, type in my question, get some links and when I click on them it closes the help window but nothing else pops up. Do I need to reinstall or is there some option that I turned off by accident?

    Take a look at this http://support.apple.com/kb/TS1538
    http://support.apple.com/kb/TS3716

  • Iphone 4s data will not work + does not show up when plugged into macbook.

    I need to try to reset my iphone because it is not allowing me to use data on the phone even though my carrier had verified all the settings are correct and that I have unlimited data on my plan. Every time I try to access the internet on the phone without wifi connected I get an error message saying "could not activate cellular data network" or "you are not subscribed to a cellular data network."
    However, when I plug my iphone 4s into my macbook pro it is recognized and shown in itunes, however I cannot download photos (iphoto shows an error message saying "no camera found") and the phone does not show up on my desktop or finder. I find alot of people have a problem with the iphone not showing up AT ALL, but mine works in itunes, just nowhere else on my computer.
    I have tried to use icloud to back it up, but when I log onto icloud with my macbook to see what data is there and try to access my photos, only my contacts and a few other apps I dont need show up. No photos at all.

    If there's an Apple store nearby make an appointment with the genius bar to have it checked.  Be sure to sync it and back it up, as well as import your photos and videos to your computer and back up your contacts separately (such as by sync them with iCloud) in case it needs to be replaced.

  • GB limit on MP3 format?   mono 64k not showing up when dragged into track

    I cannot drag and drop files I compressed to mono 64k MP3 files with Squeeze into Garage band.
    Are there limitations in GB regarding MP3 support?
    Thanks

    I am trying to Batch compress so I don't have to wait for each output from GB and after reading that GB can use MP3s and does not uncompress compressed files was why I decided to do it that way.
    As it is now I can open the AIFF in GB add the artwork for the podcast and any other info and then export as MP4 only.
    MP4 is not compatible with MP3 players or MP3 cds.
    Soooo Long story short:
    I want to have MP3s available via the website as well as podcasts. I don't want to have to do the work twice. I don't want to have to wait for each file to be compressed before I can start on the next podcast.
    ================================
    It looks like I am locked into making all of the Podcasts MP4s if I want to use Garageband which makes the files incompatible with all the other MP3 players AFAIK.
    And when I am going to send to iWeb I will have to wait for compression.
    Then I can go back and batch compress all of the AIFF files to MP3s for everyone else.
    =================================================
    This all seems silly as PodCasting supports MP3 files.
    I guess I need to find some other software or learn more about programming PodCasts.
    Dual 1.25 G4 MDD Mac OS X (10.4.4)

  • HT1304 I have an iphone5 and i did the upgrade.  Now all of the music videos that I have purchased on itunes do not show up when the phone is held horizontally.  It is just a picture of album covers.  Any thoughts?

    I have an iphone 5 and I did the upgrade.  Now all of the music videos that I purchased on itunes do not show up when I hold the phone horizontally.  It is just a picture of album covers.  Any thoughts?
    thank you

    someone swapped upgrades.  Phone could have been sold For quick cash. 

  • ITunes shows the music and audiobooks I've loaded to my iPod Touch, but they do not show up when I try to play them.

    iTunes shows the music and audiobooks I've loaded to my iPod Touch, but they do not show up when I try to play them.  I reconnect to iTunes and it shows the music and books as being loaded on my iPod.
    Sometimes the audiobook will play, then disappear from iPod's play menu after I reconnect to iTunes and load more music.  I've got plenty of free memory, and iTunes shows the files still on iPod.
    ....or should I just roll it back to iOS 5...  never had these kinds of issues with the old OS.

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all AB and resync
    To delete all ADgo to Settings>General>Usage>Storage>Manage Storage>AB and try deleting them from there
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       

  • A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?

    Question repeated: A june 2012 icloud backup shows up on my icloud storage manage list, but does not show up when i try to restore from icloud backup. what to do?
    I want to restore from my june 2012 backup because it contains pictures that i lost when my phone broke in september. if anyone could help that would be awesome. thanks

    Did you tap "Show older backups" on the Choose Backup screen (see image below)?

  • I have just downloaded a free app and there is no icon and it will not open from the list even tho it appears to have downloaded and the "open" button is available.  Does not show up when I search for it.  Plenty of memory . . .

    I Have an iPad mini running iOS 7.1.2,  I downloaded a new app and it's icon does not appear anywhere ( have ~ 180 apps so not at limit) and it won't open from the purchased apps list.  It does not show up when I search for it so can't open t that way either.  It doesn't require iOS 8.  Can't delete and reinstall, cause not icon.  This is not a normal "app won't open" question.  it doesn't start the. Stop it just doesn't seem to exist.  Any help is appreciated

    Hello Chelleuri,
    Thank you for using Apple Support Communities. 
    The following article provides information to trroublehshoot issues with installed apps, including not opening.
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
    Regards,
    Jeff D. 

  • I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work.  It won't show up when plugged into the computer.  Only charges when plugged in the wall or a car charger.

    I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work.  It won't show up when plugged into the computer.  Only charges when plugged in the wall or a car charger.  I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.

    martinfromdevon wrote:
    Warning to iPhone users.  Do not start the update of the iPhone software using iTunes.
    Nonsense, and very misleading advice.  I've updated iPhone 3G, 3Gs,and 4  through itunes many times, never had a problem once, not with one single update in nearly 5 years of iPhones.  Of course, I've never jailbroken my phones either.  Hack your phone and have update problems?  I've got news for you, the problems are not a result of iTunes or Apple's updates.

  • I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work.  It won't show up when plugged into the computer.  Only charges when plugged in the wall or a car charger.  I've tried everything imaginabl

    I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work.  It won't show up when plugged into the computer.  Only charges when plugged in the wall or a car charger.  I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.

    Dude you have a jailbroken phone as stated in your first post, no need to do a second post.
    As per the forum term of service you can't get help here.  Use google.
    that's the downfall of jailbreaking your phone.

  • Put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

    put movies in itunes on one computer why does it not show up when i access itunes from other computers or ipad2?

    i just purchased a file that had videos in it. i put them in the itunes library on my pc where i first downloaded them. i was able to transfer them to my other pc, a laptop, through my home network. i am now trying to get them on my mac pro desktop and my ipad2. my mac pro can see the other computers on my home network but i cannot get it to connect to them. i know the operating systems are different but was hoping i could transfer pictures and files from pc to mac this way. haven't been able to get it to work yet. the videos i am trying to get my mac to see came in a folder with both mac and pc versions. i thought if i got the videos i purchased into itunes that i would then be able to get them to my mac pro and my ipad2. i am new to mac/apple and have always been pc-centric so trying to marry it all has been difficult. i speak pc pretty well but am just learning apple. am i trying to do things that are not possible? i sure could use a knowledgable friendly soul to walk me through my issues of having pc and mac on the same network. i have been able to get all computers and ipad to print on my network. thanks.

  • SharePont 2013 Document Library lookup Column Properties not Showing Correctly when editing in Word

    Hi
    I keep seeing this issue albeit intermittently.  I have set up a doc library for my users which has a custom content type (lookup, metadata columns, etc)  . They all appear perfectly most of the time except the lookup column. Sometimes is just
    decides to display the title field of the current library and not the lookup list title .  It is weird as it has been working perfectly for ages given the library is populated with valid documents.
    There are some fixes listed here. Has anyone got any experience of this?
    https://social.msdn.microsoft.com/Forums/azure/en-US/e0b55531-509c-4219-8113-61b3e488de69/document-library-metadata-properties-of-a-content-type-do-not-show-correctly-when-editing-in-word?forum=sharepointdevelopmentprevious
    Freelance consultant

    Hi,
    According to your post, my understanding is that the lookup  column not display well while editing in word.
    Did you customize the Document Information Panel?
    I recommend you edit your custom document information panel or create a new document information panel, then re-publish it to check whether it works.
    https://support.office.com/en-gb/article/Create-or-edit-a-custom-Document-Information-Panel-for-a-content-type-b701a9af-3ea6-4c1a-9e1c-75363bd987c9?ui=en-US&rs=en-GB&ad=GB
    Or you can also use the methods in the post you have pasted to check whether it works.
    As the limitation of the environment, we could not reproduce the issue in our environment.
    I  would suggest you open a case to Microsoft Customer Service via Phone.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • I have a new iphone that is not showing up when I attempt to sync to itunes

    I have a new iphone that is not showing up when I attempt to sync with itunes

    Windows or Mac?
    iOS: Device not recognized in iTunes for Windows
    iPhone:  Device not recognized in iTunes for Mac OS X
    Robert, if you are using a Windows based computer, often disabling anti virus software and turning off the Firewall on the PC can help.
    iTunes for Windows: Troubleshooting security software issues

  • Unable to transfer photos (jpeg) from desktop to SD card.  Appears as if successful then does not show up when put SD card in camera.

    Unable to transfer photos (jpeg) from desktop to SD card for Cannon Power shot camera. 
    Appears as if successful, jpegs show up in SD card window,  but they do not  show up when I put SD card in camera.
    Go through entire process to no avail.  SD card is not locked.
    Thank You
    L

    Ahh, extra info ahead...
    Pictures on SD card, SanDisc-SDHC, 4GB Card, are jpeg.  The ones I would like to put on the card are jpeg as well.
    SD format MS-DOS (FAT32) .
    3.876 GB available on card.
    I have
    Exported the pics from iPhoto to the desktop. Inserted sd card into side of iMac.  The icon of card popped up.
    Attempts to no avail:
    1)   Dragged the photos to the disk icon for the sd card.
    2)   Dragged pictures into the DCIM folder (where all photos taken on camera resided).
    3)   Created new folder.  Put photos from desktop into folder and dragged ne folder inside DCIM -since pictures taken at different times had their own folders inside the DCIM folder.
    Every time the photos/files end up showing up on the sd card as long as it is in my computer but when ejected and inserted into my camera, all imported photos/jpeg file are gone.
    Hmmmmm

Maybe you are looking for