Pls help with .CAP file.

Hi.
I read a lot about how to write java applet for smart card and after read a lot about how to convert .class file into a .CAP file. But I don't know where to find informatin about what to do further. Pls can you tell or give link to a text which explains how to install .CAP file on a smart card and which tool to use in order to save .CAP file on a smart card.
Thx

It depends what installer/deletion manager your card supports. Most likely it is GlobalPlatform. Check out GlobalPlatform 2.1.1 card specification.

Similar Messages

Need help with fla.file

Hi!
I'm always having trouble with a fla.file in cs3 professional. Every time i try to reopen the file in flash i get this:
failed to open document/users.desktop/jason/social.fla
pls help reopen this file
jay

create a new directory and move your fla there and try and open. if that fails, change the file's name and try and reopen. if that fails and you created the fla, it's probably corrupt.

Can some help with CR2 files ,Ican`t see CR2 files in adobe bridge

can some help with CR2 files ,I can`t see CR2 files in adobe bridge when I open Adobe Photoshop cs5- help- about plugins- no camera raw plugins. When i go Edit- preference and click on camera raw shows message that Adobe camera raw plugin cannot be found

That's strage. Seems that the Camera Raw.8bi file has been moved to different location or has gone corrupt. By any chance did you try to move the camera raw plugin to a custom location?
Go To "C:\Program Files (x86)\Common Files\Adobe\Plug-Ins\CS5\File Formats" and look for Camera Raw.8bi file.
If you have that file there, try to download the updated camera raw plugin from the below location.
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5371&fileID=5001
In case you ae not able to locate the Camera Raw.8bi file on the above location, then i think you need to re-install PS CS5.
[Moving the discussion to Photoshop General Discussions Forum]

Help with add file name problem with Photoshop CS4

Frustrating problem: Help with add file name problem with Photoshop CS4. What happens is this. When I am in PS CS4 or CS3 and run the following script it runs fine. When I am in Bridge and go to tools/photoshop/batch and run the same script it runs until it wants interaction with preference.rulerunits. How do I get it to quit doing this so I can run in batch mode? Any help is appreciated. HLower
Script follows:
// this script is another variation of the script addTimeStamp.js that is installed with PS7
//Check if a document is open
if ( documents.length > 0 )
var originalRulerUnits = preferences.rulerUnits;
preferences.rulerUnits = Units.INCHES;
try
var docRef = activeDocument;
// Create a text layer at the front
var myLayerRef = docRef.artLayers.add();
myLayerRef.kind = LayerKind.TEXT;
myLayerRef.name = "Filename";
var myTextRef = myLayerRef.textItem;
//Set your parameters below this line
//If you wish to show the file extension, change the n to y in the line below, if not use n.
var ShowExtension = "n";
// Insert any text to appear before the filename, such as your name and copyright info between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextBefore = "Lower© ";
// Insert any text to appear after the filename between the quotes.
//If you do not want extra text, delete between the quotes (but leave the quotes in).
var TextAfter = " ";
// Set font size in Points
myTextRef.size = 10;
//Set font - use GetFontName.jsx to get exact name
myTextRef.font = "Arial";
//Set text colour in RGB values
var newColor = new SolidColor();
newColor.rgb.red = 0;
newColor.rgb.green = 0;
newColor.rgb.blue = 0;
myTextRef.color = newColor;
// Set the position of the text - percentages from left first, then from top.
myTextRef.position = new Array( 10, 99);
// Set the Blend Mode of the Text Layer. The name must be in CAPITALS - ie change NORMAL to DIFFERENCE.
myLayerRef.blendMode = BlendMode.NORMAL;
// select opacity in percentage
myLayerRef.opacity = 100;
// The following code strips the extension and writes tha text layer. fname = file name only
di=(docRef.name).indexOf(".");
fname = (docRef.name).substr(0, di);
//use extension if set
if ( ShowExtension == "y" )
fname = docRef.name
myTextRef.contents = TextBefore + " " + fname + " " + TextAfter;
catch( e )
// An error occurred. Restore ruler units, then propagate the error back
// to the user
preferences.rulerUnits = originalRulerUnits;
throw e;
// Everything went Ok. Restore ruler units
preferences.rulerUnits = originalRulerUnits;
else
alert( "You must have a document open to add the filename!" );

you might want to try the scripting forum howard:
http://www.adobeforums.com/webx?13@@.ef7f2cb

HT201299 HOW TO INSERT MICRO SIM IN I PAD MODEL- A1416? Pls help with a picture...

HOW TO INSERT MICRO SIM IN I PAD MODEL- A1416? Pls help with a picture...

My Ipad doesnt have the space to pin out the sim card tray...?
I think i have been gifted the Ipad which doesnt support sim card. Is it so?
My model no is- A1416....?

Pls Help with this

Hi,
I need a help to resolve my problem.Actually i have a JSP page with a list box. When i select some value in the list box, appropriate values must list out according to the selected value.And i have a submit button to process that jsp page.
I wrote a validation as all the fields must be entered to submit a page.
But when i tried with the following code,it's just moving to processing page when i select a values from the list box.This is happening when i cheked the validation.
Pls help with this code.This is very urgent.
Code is as follows
"Example1.jsp"
<%
String str1 = request.getParameter("Modem");
%>
<html>
<head>
<script language = "JavaScript">
function Validate()
if(document.UpdateFiosAccounts.Modem.value == "Select One")
alert("Please select the value")
document.UpdateFiosAccounts.Modem.focus()
return false
if(document.UpdateFiosAccounts.text1.value == "")
alert("Please type some text")
document.UpdateFiosAccounts.text1.focus()
return false
return true
</script>
</head>
<body>
<form name = "UpdateFiosAccounts" action="./Example1.jsp" method ="post" onSubmit= "return Validate()">
Pls select One:<select name="Modem" size="1" onChange="document.UpdateFiosAccounts.submit()">
<%
if(str1 == null)
%>
     <option value="Select One">Select One</option>
     <option value="One">One</option>
     <option value="Two">Two</option>
     <option value="Three">Three</option>
     <option value="Four">Four</option>
<%
else
%>
     <option value="<%=str1%>"><%=str1%></option>
<%
%>
</select><br>
Pls type something: <input type ="text" name="text1">
<input type ="submit" value="submit" onClick="document.UpdateFiosAccounts.action='./Accounts.jsp'">
</form>
</body>
</html>

Hi! The reason is that in the onChange property you are doing the submit, so, when you select something, it goes automatically and never pases through your validation function. So, remove that onChange. Next, the button is a submit buton, so, no matter what your validation does, the page will go. You need to change the submit type of the button to just button (<input type="button" onclick="function to validate">) and then you will get what you want. By the way, this is NOT a Java question, is more JavaScript question.
Hope this helps.

Pls help with a program

I'm making a quiz, and i store the questions in a textfile. The user can choose from 3 quizes, either Plate Tectonics, Rivers or Rocks. I managed to call the questions from Java. Each quiz has a set of 10 questions. In the code below i only included the answers to the Plate Tectonics Quiz, which i stored in an array. What i'm having problem with is, that its not working correctly, since it is displaying, after answering all the questions correctly that i have answered 0 questions from 1 question. First of all it should say out of 10 questions because i have 10 questions, and its not really working because even if i answer them all corrctly it still says 0 out of 1 question. Can someone pls help me find the error? Thanks a lot.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.io.*;
import java.util.Scanner;
import java.util.Arrays;
public class GeographyQuiz extends JFrame implements ActionListener {
private static final int FRAME_WIDTH = 140;
private static final int FRAME_HEIGHT = 160;
private static final int FRAME_X_ORIGIN = 70;
private static final int FRAME_Y_ORIGIN = 50;
   AnswerStore answerStore = new AnswerStore();
public static void main (String[] args) {
    JFrame jFrame;
    jFrame = new JFrame();
    JOptionPane.showMessageDialog(jFrame, "This is a Geography Quiz");
    JOptionPane.showMessageDialog(null, "Good Luck");
    char choice;
    int i, choice1, Password;
    String yourChoice, passString;
    passString = JOptionPane.showInputDialog("Enter the Password");
    //Password = passString.nextInt();
    Password = Integer.parseInt(passString);
    if (Password == 123) {
     JOptionPane.showMessageDialog(null, "Valid. You typed the right password. Now choose from the following menu");
     GeographyQuiz frame = new GeographyQuiz();
      frame.setVisible(true);
    } else {
      JOptionPane.showMessageDialog(null, "Invalid Password. Try Again");
public GeographyQuiz() {
    Container contentPane;
    JButton button1, button2, button3, button4, button5;
    setSize (FRAME_WIDTH, FRAME_HEIGHT);
    setTitle("Geography Quiz");
    setLocation(FRAME_X_ORIGIN, FRAME_Y_ORIGIN);
    contentPane = getContentPane();
    contentPane.setBackground(Color.pink);
    contentPane.setLayout(new FlowLayout());
    button1 = new JButton("Plate Tectonics");
    button2 = new JButton("Rivers");
    button3 = new JButton("Rocks");
    button4 = new JButton("Quit");
    contentPane.add(button1);
    contentPane.add(button2);
    contentPane.add(button3);
    contentPane.add(button4);
    button1.addActionListener(this);
    button1.setActionCommand("b1");
    button2.addActionListener(this);
    button2.setActionCommand("b2");
    button3.addActionListener(this);
    button3.setActionCommand("b3");
    button4.addActionListener(this);
    button4.setActionCommand("b4");
    setDefaultCloseOperation(EXIT_ON_CLOSE);
   public void actionPerformed(ActionEvent e) {
String ac = e.getActionCommand();
        String[] questions = null;
         try {
        if (ac.equals("b1")) {
            questions = readFile("plate_tectonics.txt");
        } else if(ac.equals("b2")) {
            questions = readFile("rivers.txt");
        } else if(ac.equals("b3")) {
            questions = readFile("rocks.txt");
        } else if (ac.equals("b4")) {
            System.exit(0);
        askQuestions(questions);
     catch (java.io.FileNotFoundException f)
        JOptionPane.showMessageDialog(null, "File not found.");
    private String[] readFile(String path)throws FileNotFoundException {
        Scanner s = null;
        StringBuilder sb = new StringBuilder();
        String separator = "\n";
        try {
            s = new Scanner(new BufferedReader(new FileReader(path)));
            s.useDelimiter(",\\s*");
            while (s.hasNext()) {
               JOptionPane.showInputDialog(null,s.nextLine());
        finally {
            if (s != null)
                s.close();
        return sb.toString().split("\\s");
    private void askQuestions(String[] questions) {
        int count = 0;
        for(int j = 10; j < questions.length; j++) {
             String input = JOptionPane.showInputDialog(null, questions[j]);
             // Use reference to AnswerStore instance to access data in it.
             if(answerStore.answer[j].equals(input))
             count++;
        JOptionPane.showMessageDialog(null, "You answered " + count +
                                      " out of " + questions.length +
                                      " questions correctly.");
class AnswerStore {
String[] answer = {
        "Hellenic", "constructive", "100km", "Italy", "Wegner",
        "constructive", "100km", "Italy", "destroyed", "Meditteranean"
}Edited by: saytri on Dec 23, 2007 2:07 AM
Edited by: saytri on Dec 23, 2007 2:29 AM

stripped to bare bones, it works OK for me
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
class GeographyQuiz extends JFrame implements ActionListener {
AnswerStore answerStore = new AnswerStore();
public static void main (String[] args) {
    JOptionPane.showMessageDialog(null, "This is a Geography Quiz\n\nGood Luck");
    char choice;
    int i, choice1, Password;
    String yourChoice;
    GeographyQuiz frame = new GeographyQuiz();
    frame.setVisible(true);
public GeographyQuiz() {
    Container contentPane;
    JButton button1;
    setSize (140, 160);
    setTitle("Geography Quiz");
    setLocationRelativeTo(null);
    contentPane = getContentPane();
    contentPane.setBackground(Color.pink);
    contentPane.setLayout(new FlowLayout());
    button1 = new JButton("Plate Tectonics");
    contentPane.add(button1);
    button1.addActionListener(this);
    button1.setActionCommand("b1");
    setDefaultCloseOperation(EXIT_ON_CLOSE);
public void actionPerformed(ActionEvent e) {
    String ac = e.getActionCommand();
    String[] questions = null;
    if (ac.equals("b1")) {
      questions = new String[]{"what is 1+1","what is 2+2"};
      askQuestions(questions);
private void askQuestions(String[] questions) {
      int count = 0;
      for(int j = 0; j < questions.length; j++) {
        String input = JOptionPane.showInputDialog(null, questions[j]);
        if(answerStore.answer[j].equals(input)) count++;
      JOptionPane.showMessageDialog(null, "You answered " + count +
                                    " out of " + questions.length +
                                    " questions correctly.");
class AnswerStore {
String[] answer = {"2", "4"};
}either the problem is in the file, or the posted code is not what you're using

Can you help with rematching file names

After a computer crash needed to reload my library. When doing this I accidently clicked the option to add track numbers to song names.
Later I was able to locate my iTunes XML from my old PC, however many of the songs (5000 out of 6000) no don't match because the original song name has been changed since my stupid error caused the files names to get the song number in front of them.
Anybody have any tips for matching the filenames back up. In my original library some files had track numbers in front and some did not. How can I match them back up. I'm comfortable programming and modifying the iTunes XML but I can't figure out a good way to list out the contents of my hard drive to do the actual matching.
Tony

Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
"can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

Help with Reconnecting Files

Over this past weekend I was moving, via Relocate Masters, large numbers of images from managed status on my MacBook Pro to referenced status on an external drive (an Air Disk, to be precise). This had gone fine for thousands of images, but Sunday night I returned to the computer to find that it was completely locked up in mid-Relocate, and seemed to have been locked up for a while. I'm not sure what happened, but it seemed bad -- I couldn't get to the Force Quit dialog, or anywhere else. I powered down by holding in the power button.
Upon resurrecting things, Aperture would not open the library. Long story shorter, I rebuilt the database and was then able to see the library contents again. But then I noticed that many files were "offline." Digging further, and using the Manage Referenced Files box, I discovered that some 3500 files need to be reconnected.
The Reconnect All button did a little bit of magic for me, but now I've gotten to a point where using Reconnect All only reconnects one file at a time. I was renaming files as I Relocated Masters, and my fear is that this is what has caused the disconnect. *So first,* can anyone tell me that this is what has caused the problem (the problem being my apparent need to now reconnect 3400 files, one-by-one)?
*Second, and more importantly to me, do I have any recourse beyond reconnecting one-by-one?* Again, the problem seems to me to be that the library file expects a file named image.jpg (or whatever), because the change of the file name to greatimage.jpg that occurred during Relocation did not get written to the library file.
Many thanks for all help and suggestions.

Homme dArs wrote:
I hope someone else can join in with a definitive answer to your problem, but I don't believe you will be happy using the configuration you are attempting to set up.
Having Aperture access your images via wireless is going to be very very slow, and any connection problems will be very frustrating. I have even abandoned the idea of using wireless backup of image files because it so slow.
Perhaps someone can help with your immediate problem, but I would strongly suggest you find a way to store your referenced files locally (a firewire drive would be ideal).
Thanks. I certainly appreciate your thought, and before trying it myself, my instinct was the same as yours. That said, until the present problem cropped up, I have to say it has been quite a good solution. My network is 802.11n, and I've noticed no real lag in accessing the files or otherwise using Aperture with a library stored as this is.
But yes, I hope someone is able to help me get these 3400-some files reconnected short of one-by-one.
Thank you for your comments.

Help with moving files

I'm having problems copying data across my network to my new mac mini and i'm looking for some help with how to resolve this issue.
I'm using "Connect to Server' to connect via SMB to a Vista x64 machine that has the files I need to copy. I'm mounting the share as the user that has permissions to the files on the vista client. The connection is fine, but when I start the copy process, I receive an error message about not having the appropriate permissions to copy files and then the entire copy process fails. Here is the exact error message:
Copy
The operation cannot be completed because you do not have sufficient privileges for some of the items.
OK
From the vista machine I have logged in as the same user and I have taken ownership of ALL of the files and folders I'm trying to copy. I also made sure that the folder is shared with EVERYONE having full access (not something I would normally do, but figured it might help this situation). The vista machine is in a workgroup if that makes a difference.
Question 1: how can I do this via command line so that instead of stopping the entire file copy it skips the ones it can't copy and copies the rest of them?
With hundreds of subfolders and thousands of files, I have no idea which ones it is failing to copy making this process quite painful.
I'm also stuck on another basic issue - when I originally connected to the share, I told the OSX machine to remember the password. If I want to reconnect to the share using a different username and different password, how do I get OSX to reprompt me for this information?
Help

You are probably better off using
ditto
In a terminal
man ditto
and read the description and instructions.
Yes, sadly, many copy process when the fail at a file abort the rest of the process. Windows does this as well.

Need help with connecting file inputs to arrays

In this assignment I have a program that will do the following: display a list of names inputed by the user in reverse order, display any names that begin with M or m, and display any names with 5 or more letters. This is all done with arrays.
That was the fun part. The next part requires me to take the names from a Notepad file, them through the arrays and then output them to a second Notepad file.
Here is the original program: (view in full screen so that the code doesn't get jumbled)
import java.io.*;       //Imports the Java library
class progB                    //Defines class
    public static void main (String[] arguments) throws IOException
        BufferedReader keyboard;                                  //<-
        InputStreamReader reader;                                 // Allows the program to
        reader = new InputStreamReader (System.in);               // read the the keyboard
        keyboard = new BufferedReader (reader);                  //<-
        String name;                 //Assigns the name variable which will be parsed into...
        int newnames;               //...the integer variable for the amount of names.
        int order = 0;              //The integer variable that will be used to set the array size
        String[] array;             //Dynamic array (empty)
        System.out.println (" How many names do you want to input?");   //This will get the number that will later define the array
        name = keyboard.readLine ();
        newnames = Integer.parseInt (name);                                         // Converts the String into the Integer variable
        array = new String [newnames];                                               //This defines the size of the array
        DataInput Imp = new DataInputStream (System.in);       //Allows data to be input into the array
        String temp;
        int length;                                                                  //Defines the length of the array for a loop later on
            for (order = 0 ; order < newnames ; order++)                                //<-
            {                                                                           // Takes the inputed names and
                System.out.println (" Please input name ");                            // gives them a number according to
                temp = keyboard.readLine ();                                           // the order they were inputed in
                array [order] = temp;                                                  //<-
            for (order = newnames - 1 ; order >= 0 ; order--)                                //<-
            {                                                                                // Outputs the names in the reverse
                System.out.print (" \n ");                                                   // order that they were inputed
                System.out.println (" Name " + order + " is " + array [order]);             //<-
            for (order = 0 ; order < newnames ; order++)                                  //<-
                if (array [order].startsWith ("M") || array [order].startsWith ("m"))     // Finds and outputs any and all
                {                                                                         // names that begin with M or m
                    System.out.print (" \n ");                                            //
                    System.out.println (array [order] + (" starts with M or m"));         //
                }                                                                         //<-
            for (order = 0 ; order < newnames ; order++)                                            //<-
                length = array [order].length ();                                                   //
                if (length >= 5)                                                                    // Finds and outputs names
                {                                                                                  // with 5 or more letters
                    System.out.print (" \n ");                                                      //
                    System.out.println ("Name " + array [order] + " have 5 or more letters ");      //<-
}The notepad file contains the following names:
jim
laruie
tim
timothy
manny
joseph
matty
amanda
I have tried various methods but the one thing that really gets me is the fact that i can't find a way to connect the names to the arrays. Opening the file with FileInputStream is easy enough but using the names and then outputing them is quite hard. (unless i'm thinking too hard and there really is a simple method)

By "connect", do you just mean you want to put the names into an array?
array[0] = "jim"
array[1] = "laruie"
and so on?
That shouldn't be difficult at all, provided you know how to open a file for reading, and how to read a line of text from it. You can just read the line of text, put it in the array position you want, until the file is exhausted. Then open a file for writing, loop through the array, and write a line.
What part of all that do you need help with?

Help with finding files

I would really appreciate any help on this! I have my itunes library on an external hard drive. The power adapter to that drive failed. I replaced it, but now when I open itunes it doesn't recognize where any of my files are. A friend told me to try to go into Edit>Preferences and find the drive of my hard drive and reset that as where the files are. That didn't work. I can go in manually and click on a song where the window pops up that itunes can't find the file, and I am able to find it and then it will play. But to do that with all files in my library would take forever. Thank you so much for any help!
(I have itunes 8)

Try This. Hold the shift key down, and open iTunes. Do not let up on the shift key until you get a window that asks you to choose a library, or create a new library. If iTunes opens without giving you that choice, just close it and re-open it with the shift key down. Nine times out of Ten it works on the first try. Click "choose a library". You will get another window that allows you to navigate to your hard drive and show iTunes where your music is stored. In a folder called iTunes or iTunes Music, choose "iTunes Library.itl" This should bring back your entire library the way it was when you last used it.

Help with referenced files and importing

This might be more complex than can be addressed here, but I'm struggling with the organization of aperture.
Because I'm not sure I want use aperture forever, and because I occasionally like to use other photo editors, I've opted for a referenced file setup. I typically arrange my pictures into year/month sub folders, with additional folders for special subjects, like my kids. I've been doing this for a long time, it works for me, and I don't want to change.
Problem #1 - avoiding duplicates when I import. When I stick the card in my computer I want to copy just the new files to the directory I specify. Image capture only looks for duplicates in the target directory, which is no help if I'm importing files to "November" from a card that has files that were previously imported to "October." The easiest solution would be to delete the images off of the card after importing, but I can't do that - my wife also wants to copy the pix to her computer and she may not copy for several weeks or months at a time.
I tried using aperture's import feature to copy files directly from my camera's memory card. The import worked, but when I tried to locate the files on disk, aperture told me there were no referenced files. Any idea where they are?
Problem #2 - import. Is there any way to make Aperture watch referenced directories and automatically add new files to the the appropriate project? It's a pain to keep manually importing files.
Problem #3 - Organization. Is there any way to set up aperture so that a project = a physical folder on my drive? I get that Aperture is trying to abstract the physical location of my files, but I don't want them abstracted. Also, why is my aperture primary library 6.2 GB when I do all my work with referenced files? Where are my edited files stored? Are these in the primary library? Where are the files from my photostreams (from my phone) stored?
Would any or all of these issues be resolved by moving to a managed file set up?
Finally, if I can't get Aperture working the way I need it, any insight into how I'd use it as an external editor to something like Picasa? I really like the aperture editing tools - that's why I bought it. But the workflow is just killing me.
Any insights would be appreciated. Thanks.

It is not as complex as you are making it. Aperture is not per se an editor. It is for storing and organizing, and quickly decoding RAW images. It is a pretty good editor, but it has the feature to allow you to specify an External Editor to which you can send images for more complex editing, and back -- all from within Aperture.
You don't want to have your images referenced so you can also edit them with other programs. That destroys the non destructive design of Aperture. If you want Referenced images, you mostly want them so they can be on a different hard drive from that used by the Library for keeping track and storing the adjustments, and not so other programs can access them.
You need to read further as to how and why Aperture works the way it does.
Ernie

Help with Exporting files in Aperture

Hello looking for your help (first time poster)
My problem is when I export using Aperture the file size almost triples . I Import Nikon RAW file, make my adjustments and export by using export version- TIFF original size 16bit.
The file size in Aperture is 50mb and when I check it in photoshop the file size is 143mb this is killing my hard drive!!
Cheers Dan.
Message was edited by: d4an

In either 16bit TIFF or PSD - esp if you have multiple bitmapped layers you are going to end up with big files, that is all there is to it. Are you sure you need PS to do your "tidying up" In most cases the answer is probably not depending on what "tidying up" means.
RB

Help with songs files transfer on iPod and iTouch?

Hey guys.
I just got an itouch recently and I need help with something but I don't really know how to describe it so I'll try my best to put it in a way for you guys to understand. Is there an option where when you plug in the iTouch into your computer, but you don't want to transfer the songs/mp3 files you already have originally on your iPod to be automatically transfer over to your itouch? Everytime when I connect the iTouch to computer it would just copy the mp3 files over to it butI don't really want that. I just want the mp3 file to stay on the iPod only.
Thank you, QuTran

Does it get cut off on the iPod or in iTunes (or both)?
Does it always happen with the same songs?
The problem may be related to the program that was used to encode those files. Do a +Get Info+ on a few of the affected songs and see if there is anything in common where is says +Encoded with+ on the Summary tab.

Pls help with .CAP file.

Similar Messages

Maybe you are looking for