PLS HLP! epub 3 German language upload error - UK version works fine?

I have the identical epub3 one in UK and one in German, the UK uploads fine to itunes checker, but the German one fails - any ideas as to why this happens?
Thanks!

Hi Can you tell me how you fixed this?
I'm encountering a similar error.
Thanks
Don

Similar Messages

AHT finds logic board error, but computer working fine

I ran the Apple Hardware Test to see the profile for my RAM, but 7 seconds into the test it stopped and reported a logic board error.
1. But my computer is working fine. If anyone has experience with this, I'll gladly take your advice. Do I ignore this error at my own risk? Or should I get it looked at now in case it's an early warning of something that can get worse? For the real Apple tech experts, here's the error code: 2I2C/1/1: 0x00000092.
Eleven months ago, I had to get a new power supply installed. It was covered under the extended warranty for power issues with iMac G5s. As I've indicated, it's been working fine since then.
2. Once AHT finds an error, it won't continue testing the remaining components. Does anyone know of a way to "force" the AHT to skip the logic board test and go on to test the other hardware items?
Thanks all.

Michael, pray tell, where does one find the published list of codes you refer to? I searched the whole internet (or so it seemed like it) looking for a resource like that. Are you an AASP?
Even my experienced Apple technician and his AASP contacts didn't realize that my error code relates to the European Union. (And, BTW, I'm in Canada and I purchased my iMac from a store in Canada.) You have solved a mystery!
The strange thing is that when I phoned Apple Tech Support and asked to speak to a product specialist, even they told me that the code means "logic board needs replacement." When I asked to speak to a higher dept., I was connected to Customer Relations (very nice, professional fellow answered). When I explained that this G5 iMac has been problematic for me (failure after 7 mos. of ownership, power supply failure after 3 yrs, etc.) he offered me $100.00 off a new iMac ($125.00 in Canada), which I accepted.
I did use TechTool Pro to check the computer. It found no problems. Four months later and it's still going strong. I don't know whether to be upset with Apple for not bothering to look up the code, or whether I should look at this as a blessing in disguise (how else would I have received $125.00 off a new iMac? And now, my father gets a G5 that I can confidently say is in good working order). And it's strange that my local tech's AASP friends weren't any wiser. Aren't AASPs privy to this error code info? A mystery indeed...

I have just installed the latest update ...IOS 7.0.4. Prior to this, my email worked fine. Now my AOL does not work; it gives an ID/password error. Everything works fine on my Windows computer. Any thoughts?

I have just installed the latest update - IOS 7.0.4. Prior to this, my AOL email worked fine. Now it gives an ID/password error message. However, everything is fine on my Windows computer. Any thoughts?

Hello there, Tim.
The following Knowledge Base article provides some good troubleshooting steps for working on resolving your issue:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Javascript Error in IE, works fine in FF

I have this page :
http://www.gamertags.com.br/jogos.html
The filters and spry data works fine in Firefox, but when using IE the page won´t load and the browser gives these errors :
Agente de Usuário: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; Embedded Web Browser from: http://bsalsa.com/; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; HPDTDF)
Carimbo de data/hora: Thu, 11 Nov 2010 12:35:40 UTC
Mensagem: Objeto esperado
Linha: 101
Caractere: 1
Código: 0
URI: http://www.gamertags.com.br/SpryAssets/SpryPagedView.js
Mensagem: Objeto esperado
Linha: 47
Caractere: 1
Código: 0
URI: http://www.gamertags.com.br/SpryAssets/SpryNestedXMLDataSet.js
Mensagem: Objeto esperado
Linha: 77
Caractere: 2
Código: 0
URI: http://www.gamertags.com.br/jogos.html
Mensagem: 'Spry.Debug' é nulo ou não é um objeto
Linha: 961
Caractere: 41
Código: 0
URI: http://www.gamertags.com.br/SpryAssets/SpryData.js
I,ve checked the forums for the most usual cause of this, but found nothing that could help me.
Any help would be great.
Thank you.

Hi,
I really appreciate the help. But that´s not it.
The Timer function in that example is not necessary in my page (but just for the sake of it, I´ve tested it)
In fact, I can remove the filters functions and the call the to the DataExtensions.js file and still the page won´t work in IE.
The problem lies in the PageView. I can make it work without it, but as I mentioned earlier I need to be able break the data into pages. My XML is quite large (almost 2MB).
Thanks again for the reply.

SWC errors, while SWF works fine, why?

Edit: I have tried using pure theora libs (no ffmpeg) and the same result - I have created a simple app showing theora info. When launched as standalone,works (shows theora version). As SWC, error "can't allocate encoder context". Anyone any idea why it's failing with allocations in SWC? This is really frustrating, seems I can't get anything video related to work. Is SWC able to support anything more than some simple C stuff?
Hi, I'm trying to make ffmpeg work through my custom SWC library which would encode multiple frames to MPEG1. I was "almost" finished now - managed to put together a test app which upon exporting to SWF displays nice progress log(I'm test encoding 25 frames in MPEG1, so it shows encoding frame 1... X bytes, encoding frame 2...X bytes etc.), all is great up to this point.
The problem is, when I emit this to swc. When calling my magic encode test function in the SWC - first, I've got stack overflow error in "dsputil_static_init". This was already weird, but I figured out that I didn't need the static init for mpeg1 encoding after exploring ffmpeg a bit, so I tried to disable this call in ffmpeg source. Then recompiled ffmpeg, my lib, tested and SWF still appears to be working fine without it. But again, when exporting to SWC - it didn't stack overflow, but this time my library errors out with "can't find codec".
I have 3 variants of the code actually - SWF, SWC and one executable which produces a real .mpg file so I can have better proof than "encoding frame X". And it still produces a good mpeg when executd from cygwin's command line. The only problem is the SWC.
My basic confusion is - why if SWF/executable with the same libs etc. working fine, and then the SWC is failing on me? I'd really need to fix this somehow, but I don't understand the reasons, I thought once it's working in SWF it will work as SWC.

Ok, this is what I did
1) I've got the globalplayer 11.5 from Adobe's archive, copied it to the corresponding folder(right next to 11.1 which was already included in my Flex).
2) mxmlc -static-link-runtime-shared-libraries -compiler.omit-trace-statements=false -library-path=decoding_encoding.swc -debug=false Document.as -o swcdemo.swf -target-player=11.5 -swf-version=18
Where decoding_encoding.swc is my former c library, Document.as only calls one function(the encoding one). This got me the swf.
3) I run this swf in debug player, in IE (11.6), and error is popping up.
In flashlog.txt I found this:
Encode virtual file             <-- this is entry point of my C function (all is fine so far, proof that it has been called)
Could not open codec            <-- FAIL again, this fails also in theora at a similar function (register codec context..huh?)
[object Exit]
          at global/com.ffmpeg::F__exit()
          at global/com.ffmpeg::F_exit()
          at global/com.ffmpeg::F_ffmpeg_encode_mpeg1()
          at global/com.ffmpeg::encode_mpeg1()
          at Document()
4) I then go to my presumably failing C library, and change this in main:
// AS3_GoAsync();    <-- I commented this
    ffmpeg_encode_mpeg1(AV_CODEC_ID_MPEG1VIDEO);   <-- I uncommented this
I launch the swf just to see if it also fails, but it goes like:
Encode virtual file
[mpeg1video @ 0x601410] Warning: not compiled with thread support, using thread emulation
Entering loop
etc..
All works! So I really don't understand, how can it work in the emitted SWF while in emitted SWC it already doesn't work? Is there a different way the swc is built, is it the way it manages memory at runtime, being restricted somehow by the main SWF, or is it just some stupid switch or setting. I'd need to see a little deeper into how the SWC is build I guess to fully understand this issue. Do you have any isnight into this ilookha, or someone else? Or perhaps any other idea.
I'm now trying to see if I can try to trace out the exact point of the issue in theora lib, basically I included AS3.h in their source code and now placing inline AS3 "trace" commands into the register codec function.
I have traced in theora's lib inside th_encode_alloc function where it fails, and located the first obvious reason:
enc=_ogg_malloc(sizeof(*enc));
if(enc==NULL) {
            inline_as3("trace('enc is NULL!');\n"); <-- my trace
I'm getting "enc is NULL". Which results into codec not found, because the whole function returns NULL. So it seems _ogg_malloc is failing to allocate memory. I bet the same reason goes for ffmpeg. _ogg_malloc is:
#define _ogg_malloc malloc
Just a normal malloc. Why wouldn't this work?

Help! Getting iTunes Error 11503 and Error (-50) was working fine this morning and now nothing

My iTunes has been working fine until this afternoon and now when I go to download music I am getting error code 11503 or (-50) Help, please!

Here's a possible fix for Error 11503 and for error 50.
It worked for me and hopefully it will work for you.
I believe this error is caused by the incomplete downloading of either an update to an app, or perhaps a big music file. In my case it was caused by closing the lid on my laptop when I was downloading app updates on a very slow internet connection in a hotel.
Anyway, here is what I did that fixed it completely.
Close iTunes.
Go to this folder : /iTunes/Mobile Applications/Downloads
You'll find tmp files there. Drag them out of this folder to a temporary folder on your desktop. The Downloads folder should now be empty.
Restart iTunes.
All should be fine.
If it's not, then I can't help further, but that's what worked for me.

YVM302 error, everything else working fine

Hi there, my fairly new HUMAX YouView box started playing up last night, we had no Freeview tv channels for about an hour with error message YVM302 being displayed. I rebooted twice, and it suddenly sprung back into life again. Tonight, I have rebooted, retuned, all to no avail, we have no Freeview channels at all. Everything else is working fine, and the aerial cable works fine when plugged directly into the TV, so why is the YouView box telling me there is no signal from the aerial?
Any help gratefully received!
Chris

Hi Rod, the re-boot worked for me the previous night so thinking about it I'm not sure it was the update yesterday as the box started displaying the weak/no signal message the night before. I left it switched off at the mains overnight last night, started it up again just now and it still hasn't found any channels. Re-tuning speeds through and comes up with zero channels found.
Guess it will be a calll to BT this morning. At least the TV still works through the aerial, and we can still watch On Demand and BT Vision through the box, but really that isn't the point is it!
Glad your box is working fine again though.
Chris

Uploading Error: AIR version must be 1.5.3 or higher

I get this error when I try uploading my AIR app to Melrose. It uploads and then this error appears. My SDK version is Adobe AIR 2.0.2 and I'm compiling using Flash CS 4 on Mac OS X 10.5. Any ideas why I would get this error?

What is the string in the _application descriptor_ is?
The following strings are valid namespaces:
http://ns.adobe.com/air/application/1.5.3
http://ns.adobe.com/air/application/2.0
The following namespaces are valid AIR namespaces but are not supported in Melrose:
http://ns.adobe.com/air/application/1.0
http://ns.adobe.com/air/application/1.1
http://ns.adobe.com/air/application/1.5
http://ns.adobe.com/air/application/1.5.1
http://ns.adobe.com/air/application/1.5.2
The installed SDK version (AIR 2.0.2) does not mean that the _application descriptor_ is targets 2.0. Please confirm and let us know if you are still stuck.

Error Message when uploading report but report works fine

Hello ,
I am facing a strange issue here, when i try to upload a report in Crystalreports.com using ODC there is an eeror message shown - " The Open Data URI does not appear to be valid one or the server is down.Do you want to Continue?"
When I click 'ok' the report uploads and when its run it works perfectly fine , it shows the parameters to choose and pulls the
right data.
Has anyone faced this ? and any idea why that error message appears although every report uploaded works perfectly fine?
Thankyou
dpa

Hi dpa,
The crystalreports.com server does some validation of that url to make sure it can be reached and that it returns some info to ensure it is an odc deployment.
It sounds like there is something particular about your url or odc deployment that is causing this validation to fail unnecessarily.
Could you enter a support ticket and supply the url that you are using so that we can test it out to find out what exactly the problem is?
Thanks
Steve

Error testing locally; works fine on remote server

I was about to post that I'd hit an error when trying to
create a
conditional region in DW 8 with ASP, CF & PHP: Training
from the Source.
Rather than paste the non-PHP code, I uploaded the page to my
remote server.
When I browsed to the link, the error wasn't there.
I inserted the code for the conditional region just before
the opening
<form> tag, as the book instructed (Lesson 6).
<?
if ($_GET['error'] == "notnumeric")
echo "<p>*** Error! One or more fields was left blank
or contained a
non-numeric character.</p>";
?>
When I preview locally, the page appears correctly, but with
the following
message before the form:
Notice: Undefined index: error in C:\Program Files\Apache
Group\Apache2\htdocs\newland\Lesson06\Start\newland-php\tourprice.php
on
line 27
Line 27 is where the "if" statement starts.
On my remote server, everything works as it should:
http://www.feathertheweb.com/newland/Lesson06/Start/newland-php/tourprice.php
Any help is appreciated.
Thanks,
Heather

So, I changed the code you had provided and that worked. Now,
I've tested
the form and when I click "submit," I get this:
Notice: Undefined index: nmChildren in C:\Program
Files\Apache
Group\Apache2\htdocs\newland\Lesson06\Start\newland-php\tourprice_processor.php
on line 2
Warning: Cannot modify header information - headers already
sent by (output
started at C:\Program Files\Apache
Group\Apache2\htdocs\newland\Lesson06\Start\newland-php\tourprice_processor.php:2)
in C:\Program Files\Apache
Group\Apache2\htdocs\newland\Lesson06\Start\newland-php\tourprice_processor.php
on line 4
I'm guessing it's related to the change I made in
tourprice.php. I tried to
figure out what needed to be changed in
tourprice_processor.php based on
that change, but I'm still pretty new at this and really
wasn't sure.
Below is the code from tourprice_processor.php:
<?php
if (is_numeric($_POST['numAdults']) == false or
is_numeric($_POST['nmChildren']) == false)
header("Location: tourprice.php?error=notnumeric");
exit;
?>
<?php
$numAdult = $_POST['numAdults'];
$numChild = $_POST['numChildren'];
$basePrice = $_POST['tourName'];
$tourPrice = ($numAdult * $basePrice) + ($numChild *
$basePrice);
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<title>Newland Tours: Tour Price
Calculator</title>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<link href="css/newland.css" rel="stylesheet"
type="text/css" /></head>
<body>
<a href="#top"><img src="images/spacer.gif"
alt="Skip to main page content"
width="1" height="1" border="0" align="left" /></a>
<table width="750" border="0" cellpadding="3"
cellspacing="0">
<tr>
<td><img src="images/banner_left.gif" width="451"
height="68" alt="Newland
Tours Banner, Left." /></td>
<td width="280"><img src="images/banner_right.jpg"
width="276" height="68"
alt="Newland Tour Banner, Right." /></td>
</tr>
<tr>
<td><img src="images/navbar.gif" name="navbar"
width="450" height="20"
border="0" usemap="#navbarMap" alt="Navigation Bar."
/></td>
<td><img name="copyright_bar"
src="images/copyright_bar.gif" width="272"
height="20" border="0" alt="Copyright 2006 Newland Tours."
/></td>
</tr>
<tr>
<td colspan="2">
<h1><br />
<a name="top" id="top"></a>Tour Price
Calculator</h1>
<p>The estimated cost of your tour is
<strong><?php echo
'$'.number_format($tourPrice, 2);
?></strong>.</p>
<p>Prices include hotel, accommodation, and travel
expenses during the
tour. They
do not include airfare to the starting
destination.</p>
<p><a href="tourprice.php">Calculate</a>
another tour.</p>
<p><a href="contact.php">Contact</a> one
of our qualified agents.</p>
</td>
</tr>
</table>
<br />
<map name="navbarMap" id="navbarMap">
<area shape="rect" coords="1,0,62,20" href="index.php"
alt="Home" />
<area shape="rect" coords="71,0,117,20" href="about.php"
alt="About" />
<area shape="rect" coords="129,0,196,20" href="tours.php"
alt="Find Tours"
/>
<area shape="rect" coords="209,0,311,20"
href="profiles.php" alt="Country
Profiles" />
<area shape="rect" coords="327,0,434,20"
href="contact.php" alt="Contact An
Agent" />
</map>
</body>
</html>
Heather
"David Powers" <[email protected]> wrote in message
news:[email protected]...
> Heather wrote:
>> I inserted the code for the conditional region just
before the opening
>> <form> tag, as the book instructed (Lesson 6).
>>
>> <?
>> if ($_GET['error'] == "notnumeric")
>>
>> When I preview locally, the page appears correctly,
but with the
>> following message before the form:
>>
>> Notice: Undefined index: error in C:\Program
Files\Apache
>
> It's badly written code. It should be
>
> if (isset($_GET['error']) && $_GET['error'] ==
"notnumeric")
>
>> On my remote server, everything works as it should:
>
> That's because your remote server has been configured to
suppress PHP
> notices.
>
> PHP notices alert you to non-fatal mistakes in coding. A
lot of people
> just ignore them, but it's a sloppy habit to get into,
because it can lay
> your scripts open to attack. Before testing the value of
a variable, you
> should always use isset() to check that the variable has
been defined in
> the first place.
>
>
http://www.php.net/manual/en/function.isset.php
>
> --
> David Powers
> Author, "Foundation PHP for Dreamweaver 8" (friends of
ED)
> Author, "Foundation PHP 5 for Flash" (friends of ED)
>
http://foundationphp.com/

I installed the latest itunes 10.6.1. I get the error -42404 message saying a component was not installed anf I cannot sync my itouch. The last version worked fine...........any suggestions?

I installed the latest version of itunes 10.6.1............I get the (-42404) error message and I cannot sync my itouch....any suggestions? Is Apple aware of this problem?

In the course of your troubleshooting to date, have you tried a complete uninstall/reinstall as per the following documents?
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Size error using OC4J Works fine in Tomcat 6.0.

Good afternoon,
I am making an application under Oracle Application Server Containers for J2EE 10g (10.1.2.3.0) and I have a strange error.
Initially I am developing the application in an environment with Apache Tomcat 6.0 and the application works perfectly. But yet when I generated the EAR for the application and get in the OC4J. An exception occurs when I have a form on a JSP and sent post size exceeds approximately 30kb.
When I saw the exception generated thought it could be problem of database, but after checking in Tomcat and OC4J does not, I'm lost and I do not know what to watch.
Thank you very much everyone.
This is the exception:
500 Internal Server Error
java.sql.SQLException: Data size bigger than max size for this type: 245841
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
     at oracle.jdbc.driver.OraclePreparedStatement.setRAW(OraclePreparedStatement.java:5610)
     at oracle.jdbc.driver.OraclePreparedStatement.setBinaryStreamInternal(OraclePreparedStatement.java:7198)
     at oracle.jdbc.driver.OracleCallableStatement.setBinaryStream(OracleCallableStatement.java:4633)
     at org.apache.commons.dbcp.DelegatingPreparedStatement.setBinaryStream(DelegatingPreparedStatement.java:157)
     at org.apache.commons.dbcp.DelegatingPreparedStatement.setBinaryStream(DelegatingPreparedStatement.java:157)
     at es.urjc.cui.dao.AccesoDatosContenido.addContenidoID(AccesoDatosContenido.java:115)
     at admin.comun._cargarEnlace._jspService(_cargarEnlace.java:110)
     [SRC:/admin/comun/cargarEnlace.jsp:59]
     at com.orionserver[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:356)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:498)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:402)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:835)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:341)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:816)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:231)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:136)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.3.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
     at java.lang.Thread.run(Thread.java:534)

Guys, no replies... Please, do provide the answer.

Acrobat 9.5 - I'm getting a 148:3 error. Everything worked fine yesterday, nothing has changed Win7

Today I tried to use Acrobat 9.5 and I am receiving this message: "Licensing for this product has stopped working."
"You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product of contacting your IT administrator or Adobe customer support for help".
Nothing has changed since I used this product yesterday. I've never had a problem with this product until now.
How can I download a new copy using the same license and without paying for a new copy. Why did this happen?

Hey thomcolby,
You might need to refer the KB file and try troubleshooting this licensing error on your system:
Error "Licensing has stopped working" | Windows
Regards,
Anubha

SQL Prefix Error in XI, Works fine in 8.5!

Post Author: cmw
CA Forum: Data Connectivity and SQL
This is valid SQL and works just fine in Crystal Reports 8.5. However, in XI, I get the following error:
Error in compiling SQL Expression:
Database Connection Error: '42000:[Microsoft][ODBC SQL Server Driver][SQL Server]The column prefix 'REPORT_TABLE'
does not match with a table name or alias name used in the query. [Database Vendor Code: 107]'.
Here is the code:
ISNULL( (
    SELECT TOP 1
        [t1].[field]
    FROM
        [database].[owner].[table1] [t1]
        INNER JOIN [database].[owner].[table2] [t2]
            ON [t1].[field] = [t2].[field]
    WHERE
        [t1].[some_field] = "REPORT_TABLE"."SOME_FIELD"
Obviously, I have changed the table names for the purposes of this example. Any help in this matter would be greatly appreciated, as I have dozens of reports to migrate from 8.5 to XI and most of them contain some soft of SQL sub-query.

Hi,
I really appreciate the help. But that´s not it.
The Timer function in that example is not necessary in my page (but just for the sake of it, I´ve tested it)
In fact, I can remove the filters functions and the call the to the DataExtensions.js file and still the page won´t work in IE.
The problem lies in the PageView. I can make it work without it, but as I mentioned earlier I need to be able break the data into pages. My XML is quite large (almost 2MB).
Thanks again for the reply.

My feed won't upload to iTunesU, but works fine if I subscribe to it through iTunes!

Hello all!
here's the problem:
I have made a link to an xml file that won't upload to iTunesU through the public site manager, and won't be validated on FeedValidator.org.
Feedvalidator gives the message: server returned timed out
iTunesU Public Site Manager returns the message that it can't download the feed from the url.
HOWEVER,
- the url to the xml file works perfectly in all web browsers - it is recognized as a feed and a working link to the video comes up right away.
- I uploaded the xml and video file to a different website(not on the University's server) and iTunesU and feedvalidator recognize it as valid, and the content appeared on our iTunesU page straight away.
- I was able to successfully subscribe to the feed (on the University's server) and download the video file using iTunes on my computer.
I am thinking it has something to do with the permissions on our University's server, but the system admin and I have reached a dead end as far as solutions
I'm getting pretty frustrated figuring this out, can anybody help?!??!
It is greatly appreciated!

Your feed definitely validates, I’ve entered it by direct input on the w3cfeed validator and it’s fine - http://validator.w3.org/feed/#validate_by_input. That suggests it’s definitely a server configuration issue. Could the server be blocking ports required by the validator or iTunes? I presume the validator and iTunes both use http port 80, in which case, as the feed renders in a browser there shouldn't be a problem. Is the server definately available to external users/applications ie off campus?
Could it be a character encoding issue? I have downloaded your feed and opened it in notepad++ and it tells me the character encoding is 'UTF8 without BOM'. Not sure if it makes any difference but I use 'UFT8' for our feeds. I think servers can change character encoding depending on how they're set up which might account for the discrepancy.
This is not connected to your original question but you're not using the itunesu name space in the rss element at the top of your feed. As you're not using any itunesu specific elements in your feed I'm not sure if it's needed but just thought I'd mention it.
<rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd"xmlns:media="http://search.yahoo.com/mrss/" version="2.0"xmlns:atom="http://www.w3.org/2005/Atom" xmlns:itunesu="http://www.itunesu.com/feed">

PLS HLP! epub 3 German language upload error - UK version works fine?

Similar Messages

Maybe you are looking for