Pls need help

I DELEDE VEDIO CLIPS FROM MY FOLDER AND FROM TRASH PERMANETLY ERASE THE ITEAMS IN THE TRASH AND HOW CAN I RECOVER TO GET BACK MY FILES?MANY TNX

Yep, that's the only way. Once you empty the trash, only thing left to do is a minute of silence for all those dead & gone bytes.

Similar Messages

  • HT1414 ipad 2 could not restore and show error 9 ,,,, pls need help

    ipad 2 could not restore and show error 9 ,,,, pls need help

    Look at error descriptions in 2nd link.
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • ACE 4710 Pls need help

    Hi,
    Pls can you help me find out where is my error in the below:
    I have an ACE 4710. Also I have 2 Bluecoat Proxy SG working in proxy mode. I want the ACE to be the Load Balancer for these 2 Proxy SG. I configure the ACE as below and put the vip-address in the Internet Explorer LAN Settings but it did not work. Also I configure Policy-based Routing on the Core Switch (for any http or https traffic going through core apply set ip next-hop vip-address).
    Core SW SVI:
    interface Vlan56
    description BC Proxy
    ip address 10.0.1.33 255.255.255.224
    interface Vlan57
    description ACE-LB-Alias
    ip address 10.0.1.65 255.255.255.224
    ACE 4710:
    hostname VSS-ACE-BC-01
    interface gigabitEthernet 1/1
      description Management
      speed 1000M
      duplex FULL
      switchport access vlan 101
      no shutdown
    interface gigabitEthernet 1/2
      description User Side
      speed 1000M
      duplex FULL
      switchport access vlan 56
      no shutdown
    interface gigabitEthernet 1/3
      description BC Proxy Side
      speed 1000M
      duplex FULL
      switchport access vlan 57
      no shutdown
    interface gigabitEthernet 1/4
      description Failover
      speed 1000M
      duplex FULL
      ft-port vlan 900
      no shutdown
    context Admin
      member sticky
    access-list external line 10 extended permit ip any any
    access-list external line 20 extended permit icmp any any
    access-list external line 30 extended permit tcp any any
    access-list external line 40 extended permit udp any any
    access-list internal line 10 extended permit ip any any
    access-list internal line 20 extended permit icmp any any
    access-list internal line 30 extended permit tcp any any
    access-list internal line 40 extended permit udp any any
    probe tcp web443
      port 443
      interval 30
      faildetect 1
      passdetect interval 30
      passdetect count 1
      open 1
    probe tcp web8080
      port 8080
      interval 30
      faildetect 1
      passdetect interval 30
      passdetect count 1
      open 1
    rserver host BC01
      ip address 10.0.1.41
      inservice
    rserver host BC02
      ip address 10.0.1.42
      inservice
    serverfarm host web443
      probe web443
      rserver BC01
        inservice
      rserver BC02
        inservice
    serverfarm host web8080
      probe web8080
      rserver BC01
        inservice
      rserver BC02
        inservice
    sticky ip-netmask 255.255.255.255 address source group1
      replicate sticky
      serverfarm web8080
    sticky ip-netmask 255.255.255.255 address source group2
      replicate sticky
      serverfarm web443
    class-map type management match-any REMOTE_ACCESS
      2 match protocol telnet any
      3 match protocol ssh any
      4 match protocol icmp any
      5 match protocol http any
      6 match protocol snmp any
    class-map match-all external-web
      2 match virtual-address 10.0.1.70 any
    class-map match-all external-web443
      2 match virtual-address 10.0.1.70 any
    class-map match-any nat-class
      2 match access-list external
    policy-map type management first-match REMOTE_MGMT
      class REMOTE_ACCESS
        permit
    policy-map type loadbalance http first-match slb
      class class-default
        sticky-serverfarm group1
    policy-map type loadbalance http first-match slb443
      class class-default
        sticky-serverfarm group2
    policy-map multi-match external-access
      class nat-class
        nat dynamic 1 vlan 57
      class external-web
        loadbalance vip inservice
        loadbalance policy slb
      class external-web443
        loadbalance vip inservice
        loadbalance policy slb443
    timeout xlate 120
    interface vlan 56
      description Server-Side
      ip address 10.0.1.43 255.255.255.224
      ip verify reverse-path
      alias 10.0.1.40 255.255.255.224
      peer ip address 10.0.1.44 255.255.255.224
      mac-address autogenerate
      access-group input internal
      service-policy input REMOTE_MGMT
      no shutdown
    interface vlan 57
      description VIP-Interface
      ip address 10.0.1.67 255.255.255.224
      alias 10.0.1.66 255.255.255.224
      peer ip address 10.0.1.68 255.255.255.224
      mac-address autogenerate
      access-group input external
      service-policy input external-access
      service-policy input REMOTE_MGMT
      no shutdown
    interface vlan 101
      description Management
      ip address 10.220.1.131 255.255.255.0
      alias 10.220.1.133 255.255.255.0
      peer ip address 10.220.1.132 255.255.255.0
      mac-address autogenerate
      service-policy input REMOTE_MGMT
      no shutdown
    ft interface vlan 900
      ip address 172.20.100.1 255.255.255.252
      peer ip address 172.20.100.2 255.255.255.252
      no shutdown
    ft peer 1
      heartbeat interval 300
      heartbeat count 20
      ft-interface vlan 900
    ft group 1
      peer 1
      priority 200
      peer priority 150
      associate-context Admin
      inservice
    ip route 0.0.0.0 0.0.0.0 10.0.1.65

    I see that you used:
      nat dynamic 1 vlan 57
    Where is the nat pool on Vlan 57 ?
    May be you can try to assign that and that should help.
    Something like below:
    Interface vlan 57
    nat-pool 1 10.0.1.93 10.0.1.93 netmask 255.255.255.224 pat
    regards,
    Ajay Kumar

  • Pls. need help..i'm using firefox 3.6.10 in windows xp it always crushes while playing farmville please help me to resolve my problem i already disabled some of my adds on but now i cannot totally open any games in face book.

    i'm using firefox 3.6.10 in windows xp it always crushes while playing farmville please help me to resolve my problem i already disabled some of my adds on and i re-install firefox, now i cannot totally open any games in face book. it says you must upgrade your flash player but it is updated. i tried to open it in google chrome and in other browser there was no problem. what should i do? please help me. thanks in advance. GOD BLESS!

    Looks like a problem with the MyWeb Search bar.
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • Pls need help on userexit

    hi experts
       can anyone  give me  the discription for below object
         <b>Develop User Exits, which will automatically assign the Order type with Purchase Order Number while making a PO using Customer Functions</b>
    thanks and regard
    satya

    Hi
    I don't believe there's one, because it needs to indicate the order type and number before creating the order, so u should transfer them by your Customer Functions.
    Max

  • Pls need help with

    Hello. Actually i dont have programming skills so much and just tryingt to make ebay listing with dreamvever using Spry .I have a alsmost finsihed the the page, just one problem with spry
    I am trying to bulld collapsible Tab menu on my page and  the big problem is that when i do the job and try to upload the listing html, Ebay rejects the page saying
    Java script not allowed.
    Your listing cannot contain javascript (".cookie", "cookie(", "replace(", IFRAME, META, or includes), cookies or base href.
    I have tries to cut and paste java script comands and see on which one it gives errors, and here is the result
    Spry.Widget.CollapsiblePanel.prototype.onTabClick = function()
    if (this.isOpen())
    this.open();
    else
    this.open();
    this.focus();
    This command when exist in html, Ebay does not allow the listing to be uploaded. So my quesion is  , is there anyway to change this command and still make the Tabs to open conent or close when they are clicked on ??
    Thanks advanced

    well, in the same listing i am using also Tabbedpanel spry and ebay does not reject that,. was a problem with , but i fixed that
    Ebay wasnt allowing to have this:
    Spry.Widget.TabbedPanels.prototype.removeClassName = function(ele, className) { if (!ele || !className || (ele.className && ele.className.search(new RegExp("\\b" + className + "\\b")) == -1)){ return;}  ........................
    so i added/replaced this line as continuation of above command
    var arrList = ele.className.split(' '); var classNameUpper = className.toUpperCase(); for ( var i = 0; i < arrList.length; i++ ) { if ( arrList[i].toUpperCase() == classNameUpper ) { arrList.splice(i, 1); i--; } } ele.className = arrList.join(' '); };
    after this, It allowed me to upload teh html not seeing any Non allowed Java
    but with Collapsible menu i am still unable to make Ebay software to accept my html

  • Pls need help with Java Extension

    hi guys
    i have created a class let say it "RectangleArea" and i created a jar file " myjar.jar" containing class "RectangleArea" so i put the jar in the ext folder to use the java extension .then i create class "AreaApp" inside "AreaApp" i instantiate "RectangleArea" .and when compiling "AreaApp" it compile good.but the problem is when runing it through an exception:-
    Exception in thread "main" java.lang.NoClassDefFoundError: RectangleArea at AreaApp.main(AreaApp.java:9)
    so i wonder how to slove this problem?

    It may be due to the following reasons
    1)myjar.jar may not be included in the classpath
    2)RectangleArea.class may be inside wrong package
    Just correct it and try again.
    Cheers,
    Pushparaj.

  • My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

    My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls  urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

    Hi there,
    Use the method described in the link below to get back up and running:
    http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
    I hope this info helps!
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • Now i have tryied everything i need help getting premier pro trial real help pls!

    now i have tryied everything i need help getting premier pro trial real help pls!

    Hi,
    Are you facing issues installing Premiere pro trial?
    Please mention your operating system.
    Error(If you're getting any)
    Thank you,
    Mohd Naseem

  • Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx

    Need help urgently, I upgraded my iPhone 4 with new OS 5, but at the last restore failed. Apple Customer Care helped me to resynch my phone with all that available in Library. I've got all back except my Contact no. Pls help guys, thnx Plz guys anyone can help plzz....I've lost all contact and I dont even have any secondary back up also...!!!

    If you've had it for less than a year, then it's still under warranty.  Take it to an Apple store or an authorized service facility.  See http://support.apple.com/kb/HT1434

  • My iPad Air is slow and often hangs. Pls I need help I don't know what to do?

    My iPad Air is slow and often hangs. Pls I don't know what to do? I need help

    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

  • Pls i need help for this simple problem. i appreciate if somebody would share thier ideas..

    pls i need help for this simple problem of my palm os zire 72. pls share your ideas with me.... i tried to connect my palm os zire72 in my  desktop computer using my usb cable but i can't see it in my computer.. my palm has no problem and it works well. the only problem is that, my  desktop computer can't find my palm when i tried to connect it using usb cable. is thier any certain driver or installer needed for it so that i can view my files in my palm using the computer. where i can download its driver? is there somebody can help me for this problem? just email me pls at [email protected] i really accept any suggestions for this problem. thanks for your help...

    If you are using Windows Vista go to All Programs/Palm and click on the folder and select Hot Sync Manager and then try to sync with the USB cable. If you are using the Windows XP go to Start/Programs/Palm/Hot Sync Manager and then try to sync. If you don’t have the palm folder at all on your PC you have to install it. Here is the link http://kb.palm.com/wps/portal/kb/common/article/33219_en.html that version 4.2.1 will be working for your device Zire 72.

  • Brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help

    brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help
    i did that middle button and top button for 6-10 seconds, hold play button, that hold button and got it right back and still it won't on but it is detected on my pc and itunes. i've already even put on some songs but it keeps on charging and charging for how many hours and if i remove it, it shuts off and won't turn on again.

    brand new/never been used iPod nano
    Call Apple Care.   You are still under warranty.  You also have 14 days from the date of purchase to return your iPod with no questions asked. 
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. 

  • My ipad 2 suddenly shut off and asked me to connect to itunes it asks me to restore but it wont work need help pls

    my ipad 2 suddenly shut off and asked me to connect to itunes it asks me to restore but it wont work need help pls

    The iPad is telling you it has entered the recovery mode - you need to follow the instructions in http://support.apple.com/kb/HT1212 for connecting to a computer running iTunes by way of the recovery mode.

  • A erase my e mail account, need help pls

    a erase my e mail account, need help they werw my job e MAIL

    It's a disgraceful failure of any customer service by BT.  Had my Btinternet email account since they launched backin ... was it 1997?  Everything digital in my life is spidered into the account now.  Its been used as my registration point for virtually everything for the past fifteen years.  And now getting less than 30 days notice to try and find every single product and website I have registered with and then change all my details?!?!?  Hell, I'd need about a year to do so; and then I would still probably have missed some!  By their actions, they potentially cutting me off from products that I have purchased & tied to this email address.
    Add to that the fact that their email that comes into your inbox sources from some dodgy 'analytics planning' website, as all the links route through there... I had serious doubts as to its legitimacy and forwarded it to their abuse contact & opened a case regarding it.  Highly unprofessional of them - especially when you consider that we are repeatedly advised by BT to never click on links unless we are sure of their validity.  And should never, ever, enter our account details on any other site other than theirs.
    Shoddy BT, very very shoddy.  I would expect a higher standard of business from such a company.  And would definitely expect a proper notification click through to come up regarding this service change when I log into email.  I would say a good proportion of their users will deregard the email as a phishing attempt.  **bleep** cowboy operation.

Maybe you are looking for

  • SRM 7.0 - Can't Create a shopping cart for an Asset

    Hi, I am trying to create a SC with account assignment Asset in SRM 7.0, extended classic. Once I change the Account Assignment Category to Asset and I search for the asset number I receive the following message. Missing Authorization check to displa

  • Error in transaction forein exchange purchase

    Good evening. I am created one transaction of foreing exchande purchased for USD 1.000.000. The transaction used is TX01. When I save the transaction the system display next message: FTR_TRD012. Recording position management: Error during distributio

  • Problem connecting Nokia C3 to home wireless route...

    Good day, Nokia! I recently bought a Nokia C3-00 WiFi phone but I can't seem to browse my home wireless connection with it. The phone can detect and connect with the wireless network successfully but when I open my mobile browser, it can't load websi

  • Remove Calendar Entries from iPod

    I've unchecked the Syncronize with Microsoft Outlook option within iTunes, but the calendar entries are still on my iPod. How do I get rid of them?

  • CC Photoshop Lightroom Anmeldung erforderlich (Mac)

    Seit dem Update das ich gestern installiert habe, werde ich in LR und PS zur Anmeldung aufgefordert, es gibt jedoch keine Möglichkeit sich mit dem Adobe Account anzumelden. Die Lösungsschritte, die in der Hilfe vorgeschlagen werden (Änderung der Spra