Pls reply urgent

Hi all,
I am using a function mod for mail alert. The user wants cretain names as BOLD & Colors in the text.
Is there any function mod which sends the mail with BOLD, COLORS & any other options?
Pls urgent.
Thanks in advance.
Vijay

Hi Nisha,
If I understood you right, try to check the values for the 0ForwardAgent in ODS in both levels (ODS1 and ODS2) if you have the correct data in them for this object, you can try scheduling the full update infopackage with selections for 0FORWARDAGENT and also for the dates you have missed with 'repair full request' from the infopackage..from level2 ODS in your case..
Hope this helps..
Best Regards,
DMK
*Assign points if it serves your purpose..

Similar Messages

  • Reg :Pls reply...seqnr

    Hi,
    It is said that seqnr is used to differentiate the records having same key and with time constraint 3.
    What is meant by key here ? is it refers to the pakey structure?
    Pls reply me...It is urgent...
    Thanks in advance,
    Sowmya.

    this field is used to identify the latest record for the infotypes which can have overlapping records at a time.(TC - 3)
    like for the IT 0001 u can find out the lates record via begda and endda but for the overlap allowed infotype like IT0022 u need this SEQNR field too as a key field along with begda and endda.
    Yes here Key means PAKEy having folowing fields -
    PERNR
    SUBTY
    OBJPS
    SPRPS
    ENDDA
    BEGDA
    SEQNR
    amit

  • UDF in message mapping instead of Java Mapping. Pls advice urgent

    Hi All,
    My scenario
    CRM --- XI -- CRM
    In XI I have to open socket connection.
    Pls refer link:
    /people/saravanakumar.kuppusamy2/blog/2005/12/15/socket-integration-with-xi
    Can Java Mapping code given in above link for socket connection can be used in Message Mapping (CRM -- CRM)UDF?
    Pls advice urgent
    Regards

    Hi Henry,
    I understood your requirement.
    But as per the architecture of XI/PI some message has to trigger your scenario.
    In this case there is no adapter where you can directly communicate with CRM system.
    Do one thing configure a dummy scenario on the sender side.
    Use File adapter for simplicity. once it pools the file with some dummy data in the file it comes to Interface mapping(message mapping) of the PIPELINE steps. Now use the code as you mentioned above(within UDF) for opening socket to CRM system and implement you business logic within that program and write the response to target interface which will infact talk with CRM system.
    Dont forget to do the coding in an infinite loop with some delay (if required). Other wise every time you have to put a message for File Adapter for triggering purposes.
    You can also acheive the same if you use Java Mapping instead of Graphical mapping with UDF(code for Opening socket and business logic). I suggest you to use Java Mapping.
    I dont know how you will comunicate with CRM system on receiver side.?
    Thanks,
    Gujjeti

  • Webservice sender and Receiver. Pls advice urgent

    Hi All,
    My Scenario
    System A (WebService) -- XI -- System B (WebService)
    Pls let me know
    1. What does it mean by WebService needs WebServer?
    2. For System A (WebService) -- XI
        Do I require WebServer to be installed at System A or XI?
    3. For XI -- System B (WebService)
    Do I require WebServer to be installed at System B or XI?
    Pls advice urgent.
    Regards

    Hi Piyush,
    Hi Piyush,
    System A (WebService) -- XI --- System B (WebService)
    I know the flow -- like both webservices will be impoted as External Definations and will me mapped.
    I was asking about Webserver.
    a. XI --- System B (WebService)
    System B is providing wsdl.
    WebServer is required at System B -- fine.
    b. System A (WebService) -- XI
    System A is providing WebService(wsdl) to XI
    XI is NOT providing WebService to System A.
    So It is a webservice(wsdl) of System A. It will be given to XI and XI will import it as wsdl.
    So do we or not require require Webserver in
    System A or XI?
    Pls tell System A (WebService) -- XI
    Webserver part.
    Regards

  • HTTP adapter. Pls advice urgent

    Hi,
    Some cleint wants to send data to PI (7.0)  through HTTP.
    Now should that client send through HTTP or it can also use
    HTTPS.
    Pls advice urgent.
    Regards

    Hi,
              All XI runtime components using the HTTP protocol support the encryption of the HTTP data stream by means of the SSL protocol, also known as HTTPS. HTTPS data streams are completely transparent to the Exchange Infrastructure
         HTTPS (Hyper Text Transfer Protocol Secure) is a secure version of the Hyper Text Transfer Protocol (http). Secure means of transferring data using the https protocol in the World Wide Web where secure ecommerce transactions, such as online banking transactions and other financial transactions are involved.
    Https encrypts the session with a digital certificate i.e., HTTP over SSL (Secure Sockets Layer) which can be used by Web browsers and HTTPS - capable client programs.
    If the website begins with https:// instead of http://, it is a secure site. Almost 99% of the browsers can connect to web servers either using http or https. The address bar in the browser will begin with https instead of http, if a web site is secured.  
    HTTPS Protocol work with the combination of programs including the browser programs which takes care of the encryption/decryption routines that exist on the web hosting servers.
    HTTP data is sent over TCP/IP port 80, whereas  HTTPS  data is sent over port 443.
    HTTPS comes in two flavors, both ensuring the confidentiality of data sent over the network
    1)Server authentication :
    Only the HTTP server identifies itself with a certificate that is to be verified by the client.
    2)Client authentication:
    Additionally, the HTTP client identifies itself with a certificate that is to be verified by the server
    Regards,
    sangeetha

  • HT4623 when i doing my update my ipad 3 why the itunes show this message ? (the ipad could not be restored this device isn't eligible for the requested guid ) what can i do now please reply urgent thanks

    when i doing my update my ipad 3 why the itunes show this message ? (the ipad could not be restored this device isn't eligible for the requested guid ) what can i do now please reply urgent thanks

    Make sure you have the latest software on your computer (tap to enlarge image)

  • PSE12 recognises my scanner, however, asks to connect??!! Pls HELP urgently

    Hello
    I have win7pro and win 8.1. PSE12 recognises my scanner, however, after going through and pressing scan it comes up with a error to coonnect the device!! The printer scanner is a HP Officejet 6500a plus if this helps.
    Pls advise urgently.

    Download and install this: http://support.apple.com/kb/DL907
    Restart your Mac.
    Reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and then next to the "Use" pulldown, select the printer model (not AirPrint). Wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Urgent pls - Replying the "Quick Select"

    Hi all,
    is there anybody knowing if it is possible and how to replicate the 'quick select' functionality???? I have tried to do it with:
    1. singleSelection Item (to know which is the row I have selected), but if I enable the PPR to trace the event the 'destination Url' is not considered.
    2. imageItem: same as above
    3. submitButton, but I cannot know which is the row I have selected.
    The problem is that in the "pageContext.setForwardUrl" I cannot insert the string "javascript:backHome();", where javascript:backHome(); is a js procedure I have written to close the current window and go back to the window calling it.
    Thanks in advance for your help,
    Rosanna.

    Hi Kumar....
    if statement should not be like ..
    if lv_keep_vgbel lt_vbrp-vgbel.
    Should be like this  if lv_keep_vgbel = lt_vbrp-vgbel.
    and try to use work area and table to select and loop the data...
    Have YOu checked whether da data in it_vbrp...
    there few error in way You are writing...
    And one more thing in the table LIKP the field BOLNR is 35 Char and VGBEL of VBRP is 10 char ...and your are equalling that to extract the data which will not happen even..
    So before select statement change VBRP-VGBEL as 35 char varible by using like this
    data : v_vgbel type likp-bolnr.
    loop at lt_vbrp.
    if lv_keep_vgbel lt_vbrp-vgbel. " Why did you right the statement like this
        if lv_keep_vgbel = lt_vbrp-vgbel.
            clear likp.
                call function 'CONVERSION_EXIT_ALPHA_INPUT'
                  exporting
                    input  = lt_vbrp-vgbel
                  importing
                    output = v_vgbel.
                  select single vbeln traid traty verur bolnr lfdat
                                                      from likp into
                                                     (likp-vbeln,likp-traid,likp-traty,likp-verur,likp-bolnr,likp-lfdat)
                                                      where bolnr = v-vgbel.
    regards,
    sg
    Edited by: Suneel Kumar Gopisetty on May 26, 2008 4:41 AM

  • Issue when doing Delta loads from PSA to DSO using DTP - Pls help Urgent

    Hi All,
    I have done 3 data loads into PSA and from PSA, iam loading the data into DSO - by splitting that load into 3 using 3 DTPs. (Split that by Fiscal Period).
    2 of the DTP loads are extracting the data from 3 PSA requests.
    But, one of the DTP load is filtering on ONE PSA request.
    So, we are not getting the full data into DSO.
    Can some one pls help me why the DTP load is beheaving like this ???
    Even though i have not given any filters for Request id, still , for one load its picking up the data by filtering on One Req ID.
    Cheers,
    Nisha

    Hi Jr,
    Sorry for late reply.
    I think i found the solution, the diff between the DTP's is i ahve ticked " Get request one after another " .
    I have changed it now and its working fine.
    Thanks,
    Nisha

  • Calling a WDA on a field's F4 help.. pls reply

    Hi friends,
    I have a WDA1, with a table of item list. coloumns --  item no:  product no: status:
    I need to give a F4 input help for product no: .. it should call a other WDA2(this is for product search. I already did this).
    so once product F4 button is hit, it shoudl call my WDA2 as a popup.... and there the product search list table, if i click one record and hit chooose button.. that product selected in WDA2, should
    transfer to my WDA1's product no coloumn?
    how to call a wda on F4 input help?  how to pass values back to my field...?
    also before the product comes to my WDA1, i need some validations to figure out the status(coloumn 3)...?
    kindly pls.. check this one.. if someone reply me it will be thankful..
    thanks in advance,
    Niraja

    Hi,
    Get yourself familiar with the concept of "Freely Programmed Value Help".
    http://help.sap.com/saphelp_nw70/helpdata/EN/47/9f724642314aabe10000000a42189b/frameset.htm
    And then take a look to the demo value help component that you can find in the system. I cannot now remember the name of this demo component, but you should find it by looking components using component interface IWD_VALUE_HELP (or searching components in SE80 with "WDvaluehelp" or something like that). You should get the idea quite easilly with this demo component provided by SAP.
    Regards,
    Karri
    Edited by: Karri Kemppi on Nov 13, 2008 9:41 PM

  • WebService Receiver Problem. Pls advice urgent.

    Hi All,
    I have R/3 (RFC) -- XI -- R/3(WebService) Scenario.
    Now when I test my WebService in R/3 using wsadmin command it works fine.
    But If I import my webservice as wsdl file and use it in Soap Receicer Adapter and use XI I get error:
    <SAP:Category>XIAdapterFramework</SAP:Category>
    <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
    <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: sapd03ci.alkhaliji.bank</SAP:AdditionalText>
    Pls advice very urgent
    regards

    Hi RAC,
    May I know where this R/3 webservice located.
    In your landscape or not?
    Thanks
    Gujjeti

  • FI Reports ***Pls Most Urgent***

    Hi Friends,
    Can you please help out for FI reports.
    Reports are: 1. Balance sheets by profit center 2. Income statement by functional area.
    Here my question is:
    1. Is this reports are available in SAP?
    2. if not How to develop because which are very big and complex it looks.
    3. what is the best way to develop these reports..
    4. Is it need to develop from top to bottom. Pls advice me and help me out how to do it. if any body develop send me some outlines.
    Can pls help most urgent and immediate need for my client.
    I will highly appreciate and reward points  as well.
    Yoga.

    Well, I would suggest you retrieve the data from the database, parse it, convert it to gif/jpeg and then show it.

  • File to File Scenario with Secure Connection. Pls help urgent

    Hello All,
    I tried a lot to get a link/blog that expalin full scenario
    for File to File Scenario with Secure Connection
    Kindly let me know if somebody have link/doc for it
    that describe all the steps to do configuring this scenario.
    What is difference in simple words between
    FTPS and SFTP.
    Pls help it is urgent as I require for Project work urgently.
    Regards

    hi rich
    go through these links
    FTPs connection failed - error ".. certificate rejected by ChainVerifier"
    Re: What is SFTP, FTI channels
    http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
    FTPS implementation question.
    http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
    Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
    /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
    File adapter
    thanks
    Kunaal

  • Pls its urgent

    hi, all
    pls tellme how to run JSP file. pls tell me in detail.i mean stepwise,,,,
    ifi hav to set any changes in tomcat.i musing tmcat5.0.
    thanx in advance.
    its little urgent
    shrikant

    hmmmm... this is a forum... not an online training portal....
    You can google and find out how to create JSP(stepwise)
    http://java.sun.com/products/jsp/docs.html

  • Error in generating the condition table.. pls help urgent

    Hi all,
    I have some condition tables to be generated in CRM from ECC.
    i am getting the following error for 2 tables : " Generation for application CRM, Usage PR and table CUS601 failed".
    But other tables data has been corectly downloaded from ECC to CRM.
    I m checking the status in SLG1. and i use tcode : CND_MAS_GEN_OBJECTS.
    Kindly help me this,
    its very very urgent.
    points will be rewarded.
    Robin

    thanks rajesh for ur reply.
    Basically the issue is like this now.
    Im trying to download the confition tables data from R3 to CRM. so in CRM...
    when i manually try to start initial download the object for a table by R3AS, tcode..
    the bdocs are been in intermeditate state in CRM. with yellow.
    when i try to reprocess it is throughing a short dump( reason telling : already a record is been availble in table : CNLCRMPRSCALEDIM, trying to insert again.
    So m not understanding what the issue would be..
    Could you please help me with this. im really in dead situation.
    it is working for other tables
    Robin

Maybe you are looking for