Pls send me the Documents about Badi/BDOCs/IDOCs

Hi All
Could any of you send me docs of a workflow/smarforms/BADIs/RFCs/Bapi/ ALE, IDOC/BDocs,edi,lsmw
my mail id is [email protected]
Kindly do the needful.
regards
kumar

Hi Kumar,
Pls reffer to my reply in the link below:-
Re: RFC,XIF,IDOC,BDOC
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

Similar Messages

Would you like to send me some Document about ALE EDI IDOC

hi experts:
I am learning about ALE,EDI,IDOC,would you like to send me some Document about ALE EDI IDOC?which can include the details of Steps,best it can have the Pictures,thanks a lot.

Hi Niel,
There may be a problem with the definition of the rule to delete the characteristic. If you go to transaction RSMRT
and use the 'check' option to check the rule you created are there any errors for the check?
If not when you get the error message that you mention is there any additional error messages created in sm21
or dumps in ST22?
If not there may be a problem with the consistency of the cube if you goto RSRV>All Elementary tests>Transaction data
and run these tests for the cubes are there any error messages? If yes please try to use the repair function in RSRV
to correct any errors.
If none of the above helps you should delete the run you created, make a dummy change to the cube (e.g add a '.'
to the description of the cube, save the change and then activate the cube, please then try and create the
remodelling rule again.
Best Regards,
Des.

TS3694 hi. friends i want details about itunes download for 4s version 5.0.1... where i download itunes pls send me the link frinds

hi. friends i want details about itunes download for 4s version 5.0.1... where i download itunes pls send me the link frinds

You can download iTunes for your computer from here : www.apple.com/itunes/download
If you want to update your iPhone to iOS 5.1.1 (you can only update to that version as that is only version that is 'signed' by Apple), then if you are on iOS 5+ already on your phone then you can update directly on the iPhone via Settings > General > Software Update.
If you are on iOS 4 (or you can do it this way if you are on iOS 5) then you will need to update via your computer's iTunes (you will need the latest version of iTunes installed on your computer).
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

I want to learn SD , Could you pls send me the Reference Book names.

Hi All,
I want to learn SD , Could you pls send me the Reference Book names.
and i heard about materials like Billing , Pricing , Shipping - Which material should i study first to understand baisc flow.
Thanks in Advance.
Regards,
Nithi.

Hi ,
Instaed of a book i will refer you the help files of SAP .
You can get there files at http://help.sap.com/
An for SD the link is http://help.sap.com/saphelp_47x200/helpdata/en/92/df293581dc1f79e10000009b38f889/frameset.htm
These files will help you a lot .
even today also SD gurus take help from these files only.
Regards

Hi pls send me the ppts and documenation to understand MM

Hi
i am an abaper i want to know about mm
pls send me the ppts and documenation to understand MM

Hi,
MM Cycle:
Purchase Requisition-> STaff in an orgn places Pur requisition for want of some goods/products - ME51
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
Purchase Order(PO)-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Invoice Verification-> ALong with the Material Vendor submits a Invoice for which the Company Pays the amount - .MIRO
Data to FI -> data will be posted to FI as per the vendor invoices
you better go through all these links u will get all the info what ever u need
for mm
http://www.sapgenie.com/abap/tables_mm.htm
http://www.sap-img.com/sap-download/sap-tables.zip
http://www.allsaplinks.com/material_management.html
http://www.training-classes.com/course_hierarchy/courses/2614_SAP_R_3_MM_Invoice_Verification_-_Rel_4_x.php
http://www.sapfriends.com/sapstuff.html
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSMAT/PSMAT.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAARCMM/CAARCMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MYSAP/SR_MM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOMDMM/LOMDMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCBMTWFMMM/BCBMTWFMMM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMIVMVAL/MMIVMVAL.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMWMLVS/MMWMLVS.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/MMISVE/MMISVE.pdf
<b>Reward Points for helpful answers</b>,
Satish

Hi , PLS Send me the ecc 6.0 intalation steps

Hi , PLS Send me the ecc 6.0 intalation steps with screen shots.
pls send me any one as soon as possible.
my id is vksaini at gmail. com
any kind of help is highly appricated.

Vikas - I assume you want installation steps for the preview installation?
The installation steps are delivered with the downloaded installation files. Check the documentation directory.

Hi All, Pls send me the recording for va01 by handling table control

Hi All, Pls send me the recording for va01 by handling table control with 3 or more materials. Pls send me a flat file and code ASAP.
Thanks&regards.
Bharat

Here is a example of similar kind ..plz go through this doc..it will be help hul 4 u
How to deal with table control / step loop in BDC?
Steploop and table contol is inevitable in certain transactions. When we run BDC for such transactions, we will face the situation: how many visible lines of steploop/tablecontrol are on the screen? Although we can always find certain method to deal with it, such as function code 'NP', 'POPO', considering some extreme situation: there is only one line visible one the screen,
our BDC program should display an error message. (See transaction 'ME21', we you resize your screen to let only one row visible, you can not enter mutiple lines on this screen even you use 'NP')
Now, I find a method with which we can determine the number of visible lines on Transaction Screen from our Calling BDC program. Maybe it is useless to you, but I think it will give your some idea.
Demo ABAP code has two purposes:
1. how to determine number of visible lines and how to calculte page number; (the 'calpage' routine has been modify to meet general purpose usage)
2. using field symbol in BDC program, please pay special attention to the difference in Static
ASSIGN and Dynamic ASSIGN.
Now I begin to describe the step to implement my method:
(I use transaction 'ME21', screen 121 for sample, the method using is Call Transation Using..)
Step1: go to screen painter to display the screen 121, then we can count the fixed line on this screen, there is 7 lines above the steploop and 2 lines below the steploop, so there are total 9 fixed lines on this screen. This means except these 9 lines, all the other line is for step loop.
Then have a look at steploop itselp, one entry of it will occupy two lines.
(Be careful, for table control, the head and the bottom scroll bar will possess another two fixed lines, and there is a maximum number for table line)
Now we have : FixedLine = 9
LoopLine = 2(for table control, LoopLine is always equal to 1)
Step2: go to transaction itself(ME21) to see how it roll page, in ME21, the first line of new page is always occupied by the last line of last page, so it begin with index '02', but in some other case, fisrt line is empty and ready for input.
Now we have: FirstLine = 0
or FirstLine = 1 ( in our case, FirstLine is 1 because the first line of new page is fulfilled)
Step3: write a subroutine calcalculating number of pages
(here, the name of actual parameter is the same as formal parameter)
global data: FixedLine type i, " number of fixed line on a certain screen
LoopLine type i, " the number of lines occupied by one steploop item
FirstLine type i, " possbile value 0 or 1, 0 stand for the first line of new
" scrolling screen is empty, otherwise is 1
Dataline type i, " number of items you will use in BDC, using DESCRIBE to get
pageno type i, " you need to scroll screen how many times.
line type i, " number of lines appears on the screen.
index(2) type N, " the screen index for certain item
begin type i, " from parameter of loop
end type i. " to parameter of loop
*in code sample, the DataTable-linindex stands for the table index number of this line
form calpage using FixedLine type i (see step 1)
LoopLine type i (see step 1)
FirstLine type i (see step 2)
DataLine type i ( this is the item number you will enter in transaction)
changing pageno type i (return the number of page, depends on run-time visible line in table control/ Step Loop)
changing line type i.(visible lines one the screen)
data: midd type i,
vline type i, "visible lines
if DataLine eq 0.
Message eXXX.
endif.
vline = ( sy-srows - FixedLine ) div LoopLine.
*for table control, you should compare vline with maximum line of
*table control, then take the small one that is min(vline, maximum)
*here only illustrate step loop
if FirstLine eq 0.
pageno = DataLine div vline.
if pageno eq 0.
pageno = pageno + 1.
endif.
elseif FirstLine eq 1.
pageno = ( DataLine - 1 ) div ( vline - 1 ) + 1.
midd = ( DataLine - 1 ) mod ( vline - 1).
if midd = 0 and DataLine gt 1.
pageno = pageno - 1.
endif.
endif.
line = vline.
endform.
Step4 write a subroutine to calculate the line index for each item.
form calindex using Line type i (visible lines on the screen)
FirstLine type i(see step 2)
LineIndex type i(item index)
changing Index type n. (index on the screen)
if FirstLine = 0.
index = LineIndex mod Line.
if index = '00'.
index = Line.
endif.
elseif FirstLine = 1.
index = LineIndex mod ( Line - 1 ).
if ( index between 1 and 0 ) and LineIndex gt 1.
index = index + Line - 1.
endif.
if Line = 2.
index = index + Line - 1.
endif.
endif.
endform.
Step5 write a subroutine to calculate the loop range.
form calrange using Line type i ( visible lines on the screen)
DataLine type i
FirstLine type i
loopindex like sy-index
changing begin type i
end type i.
If FirstLine = 0.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loopindex gt 1.
begin = Line * ( loopindex - 1 ) + 1.
end = Line * loopindex.
if end gt DataLine.
end = DataLine.
endif.
endif.
elseif FirstLine = 1.
if loopindex = 1.
begin = 1.
if DataLine <= Line.
end = DataLine.
else.
end = Line.
endif.
elseif loop index gt 1.
begin = ( Line - 1 ) * ( loopindex - 1 ) + 2.
end = ( Line - 1 ) * ( loopindex - 1 ) + Line.
if end gt DataLine.
end = DataLine.
endif.
endif.
endif.
endform.
Step6 using field sysbol in your BDC, for example: in ME21, but you should calculate each item will correponding to which index
form creat_bdc.
field-symbols: <material>, <quan>, <indicator>.
data: name1(14) value 'EKPO-EMATN(XX)',
name2(14) value 'EKPO-MENGE(XX)',
name3(15) value 'RM06E-SELKZ(XX)'.
assign: name1 to <material>,
name2 to <quan>,
name3 to <indicator>.
do pageno times.
if sy-index gt 1
*insert scroll page ok_code"
endif.
perform calrange using Line DataLine FirstLine sy-index
changing begin end.
loop at DataTable from begin to end.
perform calindex using Line FirstLine DataTable-LineIndex changing Index.
name1+11(2) = Index.
name2+11(2) = Index.
name3+12(2) = Index.
perform bdcfield using <material> DataTable-matnr.
perform bdcfield using <quan> DataTable-menge.
perform bdcfield using <indicator> DataTable-indicator.
endloop.
enddo.
Sample code
Following is a sample code of handling table control in BDC.
REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
DUMMY(100) TYPE C,
END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
LIFNR(10) TYPE C,
BUKRS(4) TYPE C,
EKORG(4) TYPE C,
KTOKK(4) TYPE C,
NAME1(30) TYPE C,
SORTL(10) TYPE C,
LAND1(3) TYPE C,
SPRAS(2) TYPE C,
AKONT(6) TYPE C,
FDGRV(2) TYPE C,
WAERS(3) TYPE C,
END OF IT_XK01,
BEGIN OF IT_BANK OCCURS 0,
BANKS(3) TYPE C,
BANKL(10) TYPE C,
BANKN(10) TYPE C,
KOINH(30) TYPE C,
LIFNR(10) TYPE C,
END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = 'C:\VENDOR.TXT'
FILETYPE = 'ASC'
TABLES
DATA_TAB = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
APPEND IT_XK01.
ELSE.
IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro using 'SAPMF02K' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-REF_LIFNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
IT_XK01-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
IT_XK01-BUKRS.
perform bdc_field using 'RF02K-EKORG'
IT_XK01-EKORG.
perform bdc_field using 'RF02K-KTOKK'
IT_XK01-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-TELX1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
IT_XK01-NAME1.
perform bdc_field using 'LFA1-SORTL'
IT_XK01-SORTL.
perform bdc_field using 'LFA1-LAND1'
IT_XK01-LAND1.
perform bdc_field using 'LFA1-SPRAS'
IT_XK01-SPRAS.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-KUNNR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-KOINH(02)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
DATA : FNAM(20) TYPE C,
IDX TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field using FNAM
IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFB1-AKONT'
IT_XK01-AKONT.
perform bdc_field using 'LFB1-FDGRV'
IT_XK01-FDGRV.
perform bdc_dynpro using 'SAPMF02K' '0215'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-ZTERM'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0220'.
perform bdc_field using 'BDC_CURSOR'
'LFB5-MAHNA'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0310'.
perform bdc_field using 'BDC_CURSOR'
'LFM1-WAERS'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFM1-WAERS'
IT_XK01-WAERS.
perform bdc_dynpro using 'SAPMF02K' '0320'.
perform bdc_field using 'BDC_CURSOR'
'WYT3-PARVW(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
MODE 'A'
UPDATE 'S'
MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Reward if helpful

Can you pls send me the link to down load JDeveloper version 10.1.2

Dear All,
can you pls send me the link to down load JDeveloper version 10.1.2
Regards,
Prasanth.

Hi,
[http://www.oracle.com/technology/software/products/jdev/archives.html|http://www.oracle.com/technology/software/products/jdev/archives.html]
Pedja

What is the compansation management ,send me the documents

hi,
this is pandu,i am new to the hr can u send me the documents and pdfs to understand the compensation management.
regards,
pandu.

Hi,
The core components in Compensation Management are: Job Pricing, Budgeting, Compensation Administration, and Personnel Cost Planning. Each of these components answers a question:
Job Pricing: What are the jobs in my enterprise worth, in relative and real terms?
Budgeting: How much money, and how many shares do I, as a department head, have available for my employees?
http://help.sap.com/saphelp_47x200/helpdata/en/66/9bba8b3aff11d189370000e829fbbd/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PACM/PACM.pdf
Compensation management in this main infotypes are given below( See again T.code: OOIT):
1)IT10005-----planned comepensation
2)IT1051------survey data
3)IT1050----Job evaluation Data
4)IT0380---compensation History
5)IT0381--Stock awards( in LTI-long term incentives).
Compensation management is management contains PCP (personel cost planning),this pcp is integarting with given sub modules :
1) set up integration with cost accounting(T.code:OOCK)
2) set control parameters for PCP (T.code:OOKP)
And if u have any quaries plz send ur all quaries to [email protected]
See this websites it may help u for future endovers :
1) www.sapbrain.com
2) www.help.sap.com
3) www.saptools.com
4)www.saphelpbykevin.com
5)www.sapsuperusers.com
Reward if helpful.
Regards,
Harini.S

Have the document about function DATES?

Have the document about function DATES?,I study the online help that I am illegibility.

you can go to transaction PE04, enter DATES for the name of the function.
Finally click on the blue colored "i" icon on the top of your SAP GUI screen.
The documentation that will be displayed will explain how the schema function DATES should be used.

Can any body send me the Faq's on ALE/IDoC ?

Can any body send me the Faq's on ALE/IDoC ?

hi,
check these...
http://www.onestopsap.com/interview-Question/ale/
http://sap.ittoolbox.com/groups/career/sap-career/aleidoc-interview-questions-688290
http://www.erpgenie.com/faq/ale.htm

HI PLS SEND ME THE ANSWERS

HI friends plz send me the answers
What are the steps to be followed while doing enhancement?
How do you find particular key figure is coming from particular data target?
How to load data duplicate without over writing?
You are running process chains without manually how can you compress cube?
What is reconciliation can you describe it?
What is recording process?
What is the dynamic selection criterion in sapbw? Where they will use it? What is purpose of that?
with regards
sridhar

Hi,
Pls check SAP BW Interview Question !
on BW interview questions.
Eddy
PS. Reward the useful answers and you will get <a href="/people/baris.buyuktanir2/blog/2007/04/04/point-for-points-reward-yourself">one point</a> yourself!

HT5622 Pls send me the sercurity questioned i forgot them

Pls send me security questioneds by [email protected] I forgot them

Click here for information. If you can't get the answers emailed to you for some reason(the email may take a few hours to arrive), contact the iTunes Store staff via the link in that article.
(87944)

Pls send me the docs if u have

hi,
i have been working on the same matter for days but not getting proper solution.
if u can send me the docs, i would be obliged.
thanx in advance.

Hi Surendhar
Please have a look at following links
Infoset:
http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm
Creating infoset:
http://help.sap.com/saphelp_nw04/helpdata/en/a3/96663bd194a978e10000000a11402f/content.htm
Infoset query performance:
Re: Infoset Query Performance
Re: Infoset Query Performance
Hope this helps
Regards
Pradip

The document about MediaBox?

I duno how to use it.
Where is the document?

you can go to transaction PE04, enter DATES for the name of the function.
Finally click on the blue colored "i" icon on the top of your SAP GUI screen.
The documentation that will be displayed will explain how the schema function DATES should be used.

Pls send me the Documents about Badi/BDOCs/IDOCs

Similar Messages

Maybe you are looking for