Pls send the JCA rar file for Websphere

Hi All,
Is there any JCA rar file for IBM Websphere server? I want to access BAPI from through my application in Websphere. I dont have JCo. I want to use JCA only.
Where can I find the JCA rar file for Websphere server?
If you have the rar file that need to be delpoyed in WEbsphere pls send to : [email protected]
Thanks In advance
George

Hi,
When you configure the Connection Factory for FTP Adapter in Admin Console,along with the hostname, username, password, port; we also need to give the path of remote location as where
you want to write the file in remote Server. While configuring the Connection Factory, find the attribute called ftpAbsolutePathBegin. Please fill this
attribute with the path like /soa/ftp/file (example path)
Also , try to bounce the server and test the same...
Please try this and let me know...
Thanks,
N

Similar Messages

When installing Server 2008 Datacenter from disc, I get the error message "Windows could not parse or process the unattent answer file for pass [specialize].

This is a clean install from s disc onto a 3TB GPT drive. This is for testing. I'm not concerned with finding a more practical solution for this installation.
There is no image or answer file involved. But at the "Completing Installation" phase, I receive this error message about an answer file.
Has anyone else expecrienced this problem? The only results I find here are regarding actual imaging with answer files.
EDIT: [Redacted]
EDIT 2: Since this now happens with every single installation of Server 2008 on this system, I feel the need to keep this open and elaborate on my situation.
I originally installed Server 2008 on the 2TB partition of this 3TB drive. The partition type was MBR. I reinstalled it (there was a false alarm for malicious software) since it was a fresh install without updates or anything else installed. And for the
second time, it installed fine.
I decided to make the most of my 3TB drive and try GPT partitioning. So I went into the command prompt > diskpart > ran "clean" on the disk, then "convert GPT"
That is when I tried another install of Server 2008 and received this error message about an answer file.
I decided to convert it back to MBR and get on with what I wanted to test in the first place. So I went into Diskpart again, ran "clean", rand "convert MBR" and started the install. But this resulted in the same error message about an
answer file.
I went back to Diskpart, "clean"ed the disk, ran "convert dynamic" to make sure it was dynamic, then tried the install again, with the same result.
Now, I've tried installing on the disk as GPT, MBR basic and MBR dynamic. I've tried a different installation disc, as well. I got the same result. At this point, I'm going to switch hard drives, but I'm still open to input. Thanks for reading!

Hi,
As you swapped the hard disk, whether the same issue occurs again if you redo the same steps?
I asked "OEM or retail" because of this known issue:
"Windows could not parse or process the unattend answer file for pass [specialize]" error message when you perform an in-place upgrade in Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2425962
An answer file may already contain in the disc which causes the issue.
If issue still exists you can click Shift + F10 during the installation process to see the log. Check if the installation error for detailed information.
If you have any feedback on our support, please send to [email protected]

How to create xml file from Oracle and sending the same xml file to an url

How to create xml file from Oracle and sending the same xml file to an url

SQL/XML (XMLElement, XMLForest, XMLAgg, etc) and UTL_HTTP.
Whether that works for you with the version of Oracle you have, your requirements, and needs is another story. A little detail goes a long way.

Pls give the way to debug for PI

Hi experts,
In IR, I've tested the mapping.It can work, pass.
In ID, I finished all steps, but it failed in "Test Configuration". How do find the error? who give me the full way to debug?
I'm a senior programmer, I can set breakpoints, step over in IDE software if exception.
pls give the way to debug for PI
Many thanks.

Hi Mikenl,
We cannot set break points in SAP PI.
In ID, I finished all steps, but it failed in "Test Configuration". How do find the error? who give me the full way to debug?*
Can you tell me how exactly are you testing your scenario? Is it through RWB --> Test Tab?? or is it an end to end test involving Sender and Receiver.
If you ever face any error in SAP PI during Test you can do the following:
1. Check SXI_MONITOR to see if your message has failed there, you can read the error in the trace level of the message.
2. For monitoring your message you can use Runtime Workbench where you can goto Message Monitoring and check at which level the message has failed (Adapter as well Integration Engine level). There is tab called "Detail" which when clicked after selecting your message will give you the details of the processing of your message.
3. Sometimes it may happen that everything is succesful at Integration Engine level but message has failed at adapter engine level. In this case check your Receiver communication channel which will be in error and will give you the details of the error.
Cheers
Dhwani

Possible elements in the instanceconfig.xml file for presentation services

g'day
Has anyone here come across a list of all the possible elements that can be put in the configuration file for a presentation service, instanceconfig.xml ?
I have found next to nothing in the documentations, about what can be configured there.
What I am specifically after is: How can I change the default listening port for the Presentation Service? The default port is 9710 and I want to move to another port.
Also, how can I move the JavaHost from the default port 9810? I can change the file OracleBI/web/javahost/config/config.xml to reflect the change. Once the JavaHost has been restarted it starts up on the expected port, but the Presentation Service still tries to communicate over RPC to port 9810. How do I configure the presentation service to search for the JavaHost on a non-default port?
I have boiled it down to my original question: What are the possible values I can configure in the instanceconfig.xml file?
Any comments here would be great.
Cheers, 
Borkur

So, I had a little breakthrough here.
I found in the OBIEE deployment guide, page 142:
To change the Presentation Services listener port
1 Open the instanceconfig.xml file for editing.
2 Locate the <WebConfig> element.
3 Within the <WebConfig> tags, create the element <RPC> and assign it the RPC Listener Port
value for the BI Presentation Services instance, as shown in the following example.
<WebConfig>
<ServerInstance>
<RPC>
<Listener port="9715" />
</RPC>
</ServerInstance>
</WebConfig>
NOTE: In the preceding example, the RPC Listener port for the BI Presentation Services instance
has been changed to port 9715 from the default of 9710.
4 Save changes to the file.
This almost works. The RPC element has been deprecated, as was reported in the sawserver.out.log:
The configuration entry 'RPC/Listener' is deprecated. Please refer to the admin guide for more information.
What I then did was to just remove the RPC elements and leaving the Listener element straight under there ServerInstance element. This seems to have solved the problem.
I still have to figure out how to let the Presentation Service know that I have moved the JavaHost to antoher port ...
Cheers,
Borkur

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.

Hi Tracie,
I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
How did you resolve your problem?
Would appreciate any help here.
Thanks,
Deehay

Where is the JMS jar file for CEP?

I cannot find in any jar finder the JMS jar file for CEP.
I mean the jar file which includes com.bea.wlevs.adapters.jms.api.InboundMessageConverter, com.bea.wlevs.adapters.jms.api.OutboundMessageConverter, etc.
Does anybody know the link?
Thanks!

Thanks, but it is not there.
I only have the following:
com.bea.core.jsmpool_1.7.0.0.jar
javax.jms_1.1.1.jar
org.springframework.spring-jms_2.5.6.jar
And if I cannot find it there, where could it be?
Thanks!

[svn:osmf:] 13000: Adding the missing readme file for the captioning sample app.

Revision: 13000
Revision: 13000
Author:   [email protected]
Date:     2009-12-16 10:36:36 -0800 (Wed, 16 Dec 2009)
Log Message:
Adding the missing readme file for the captioning sample app.
Added Paths:
    osmf/trunk/apps/samples/plugins/CaptioningSample/readme.txt

Carey,
I have tried london1a1's workaround, and it has not made any difference.
It seems that london1a1 suggests changing the Camera.h file in this location:
          Users/london1a1/Documents/DW_NAF/PhoneGapLib/PhoneGapLib/Classes/Camera.h
Whereas you're saying to change the Camera.h file in this location:
          /Applications/Adobe Dreamweaver CS5.5/Configuration/NativeAppFramework/DWPhoneGap/iphone/PhoneGapLib/Classes/Camera.h
I've tried changing the Camera.h file in both locations. Neither has made a difference.

Warnings in the Upgrade Log file for OBIEE 11G from 10G

Hi,
I am new to OBI 11g.
I have installed simple type OBI 11g (version - 11.1.1.5.0) on a single server(Windows 2003, RAM-4GB,CPU-2.8GHz Dual Core ). I used upgrade assistant to upgrade the RPD & Webcat from 10.1.3.4.1 version to 11g, but I got about 50K warnings in the upgarde log file for the web catalog. They were basically 2 types as below -
1. [2012-02-24T13:17:48.255-05:00] [BIEE] [WARNING] [] [upgrade.BIEE] [tid: 14] [ecid: 0000JMk1k3lDkZKcyToYpk1FHuer000005,0] Invalid columnID reference 'c10' in views!
Does someone know this warning and if this requires a fix or it would not impact any reports or dashboards? This error is about 25K times in the upgrade log file.
2. [2012-02-24T12:20:04.162-05:00] [BIEE] [WARNING] [] [upgrade.BIEE] [tid: 14] [ecid: 0000JMk1k3lDkZKcyToYpk1FHuer000005,0] Removed the following node from the element 'view': [[
<saw:selector xmlns:saw="com.siebel.analytics.web/report/v1.1" columnID="c20" prompt="true"><saw:choice type="column" formula=""- Year"."MVSR Doses R12M""><saw:tableHeading><saw:caption><saw:text>Month</saw:text></saw:caption></saw:tableHeading><saw:columnHeading><saw:caption><saw:text>Doses</saw:text></saw:caption></saw:columnHeading></saw:choice><saw:choice type="column" formula=""- Year"."MVSR Doses YTD"-"- Year"."MVSR Doses Prior YTD""><saw:tableHeading><saw:caption><saw:text>Year</saw:text></saw:caption></saw:tableHeading><saw:columnHeading><saw:caption><saw:text>YTD Dose Volume Change</saw:text></saw:caption></saw:columnHeading></saw:choice></saw:selector>
I have checked this error on Oracle support web and it says that this warning is fine as there have been some features in 10G that would not be in the OBI 11G and are not required. I am still not convinced why there should be any warning for this type of issue.
Please let me know if someone has faced these warnings in when doing the upgrade of the 10g RPD and Webcat to 11g together.
Just as note, the services start fine and I could login to the application with users and see the dashboards and reports although I did not check all the dashboards and reports as this is a POC before doing the actual upgrade.
Edited by: user11255710 on Feb 24, 2012 1:44 PM

Hi
Can you please refer me to the links on oracle web support which explained that these warnings are ok and can be ignored. We are also facing the same issue.
Thanks in advance.

Issue after installing Designer 10.1.2 on Windows7 - ???-21705: The .msb message file for product "Unknown", utility "CDR" could not be found

Hi,
I installed Oracle Designer 10.1.2 on my laptop which is running Windows7. I followed the recommendations to make run the setup.exe file (compatibility SP2 & Run as administrator) but while the installation I got the error message twice or 3 times: "The procedure entry point GetProcessImageFileNameW could not be located in the dynamic library PSAPI.DLL". I skipped this message and the installation ended with success anyway. Starting the first Designer windows works well. Though when I click on the des2k61.exe file and once I entered the correct Repository Owner/password and connect string I got the message:
???-21705: The .msb message file for product "Unknown", utility "CDR" could not be found.
For information I used to have Designer 10.1.2 on my former laptop (also Windows 7) and it works well. I migrated my DB (11.2.0.2) to the new PC which includes the repository owner I'm trying to use.
Any idea about the possible origin of the issue?
Thanks in advance for your help.
Kind regards,
Yves

Hi,
I installed Oracle Designer 10.1.2 on my laptop which is running Windows7. I followed the recommendations to make run the setup.exe file (compatibility SP2 & Run as administrator) but while the installation I got the error message twice or 3 times: "The procedure entry point GetProcessImageFileNameW could not be located in the dynamic library PSAPI.DLL". I skipped this message and the installation ended with success anyway. Starting the first Designer windows works well. Though when I click on the des2k61.exe file and once I entered the correct Repository Owner/password and connect string I got the message:
???-21705: The .msb message file for product "Unknown", utility "CDR" could not be found.
For information I used to have Designer 10.1.2 on my former laptop (also Windows 7) and it works well. I migrated my DB (11.2.0.2) to the new PC which includes the repository owner I'm trying to use.
Any idea about the possible origin of the issue?
Thanks in advance for your help.
Kind regards,
Yves

In Yosemite I cannot locate the My Templates file for Pages.

In Yosemite I cannot locate the My Templates file for Pages.

When you select "new" "My Templates" should be at the bottom of the Sidebar.
The second line is in your bio and appears when asking a question. You can change it by clicking on bunnygrl to open your Bio to edit.

Where to download the webcentertutorialcontent.zip file for JDev 10.1.3.x?

A quick question for the download location of the webcentertutorialcontent.zip file for version 10g (10.1.3.2 or later).
I am going through the Oracle WebCenter Framework Tutorial 10g (10.1.3.2.0) (document id B31072-02) to gain an understanding of the working mechanism of portlets. The tutorial requires the use of the webcentertutorialcontent.zip file to set up the sample application, and points to http://www.oracle.com/technology/products/webcenter/files/webcentertutorialcontent.zip for downloading the file.
But that page has been updated to 11g. I was able to find the archived old versions of webcenter, but not that zip file.
It would very much appreciated if someone knows and let me know where it is.
Many thanks!
Newman

On this page: http://www.oracle.com/technetwork/middleware/webcenter/documentation/index.html you have a list of all files.
At the bottom in the Oracle WebCenter 10g (10.1.3.x) section you have a part: Building a WebCenter Application Step by Step Guide with a link to the supported files: http://download.oracle.com/otndocs/tech/webcenter/files/SRDemo_App_Download.zip
This is from the 10g version...
You are right that 11g applications does not run on a 10g app server. Oracle 11g fusion middelware uses weblogic as an application server. This does not use the OC4J container anymore.
11g and 10g have a different licence so if you are using 10g and you want to use 11g, you need to buy a licence for weblogic and so on.
If you are currently looking into the use of webcenter/portlets and you are planning to use it later on, than oracle will propose 11g because i don't think 10g is supported... I don't think you can buy a webcenter 10g license..
By the way... You can install jdeveloper 11g in a sepperate middelware folder than your 10g version. This means that you easily can use them together. If you are planning on using webcenter, the best thing to do is install jdeveloper 11.1.1.3 (latest stable version) and install the webcenter extension. This allow you to easily create portlet producers and webcenter applications. You can easily deploy them on the integrated server. This is a lot easier than in the 10g release.

Where can i find the installation's files for photoshop element version 7

Where can I find the installation's files for Phtoshop element version 7 ?

This should help:
Download Photoshop Elements products | 9, 8, 7
Be sure to follow the instructions carefully.

Where can I download the unrestricted policy files for the JCE?

I'm getting errors because I don't have the unrestricted policy files for the JCE. I've checked Sun's website, but I can't find them anywhere. Can someone provide me a link?

At the bottom of the JDK download page - http://java.sun.com/j2se/1.5.0/download.jsp

Where can I download the ReadOutLoud.api file for Adobe X, 10.1.10, running on 64bit Windows 7?

Where can I download the ReadOutLoud.api file for Adobe X, 10.1.10, running on 64bit Windows 7?
Any help will be very much appreciated.
thank you, and best regards... ...jkashn

Hi Bernd,
Thanks very much for your reply. Based upon your assertion that "ReadOutLoud.api" is part of the "typical" Adobe Reader installation, I searched for and found how to activate and use it (from the "View" menu). It couldn't be more simple - most operations like this are "really very easy" the *second and subsequent times* that you perform them. :-)))
thanks again, and best regards... ...jkashn
PS: I'm glad that you got the 10 points for your perfectly "Correct Answer"!!!

Pls send the JCA rar file for Websphere

Similar Messages

Maybe you are looking for