Pls tell me KANBAN SPRO settings
Dear friends,
I devoloped a ZPSFC_KANBAN and attatched to WEK1 output type in NACE for std print program SAPM07DR.
but when i executed PK17 tcode it is picking standard form i.e PSFC_KANBAN.
very urgent pls tell me
what should i do?
is any SPRO settings required.
VENU
SATYAM(PUNE) - 9822814468
Hi Venu,
If my guess is right KANBAN printing from PK17 doesnt use output type defined in NACE. It uses Replenishment Strategies in SPRO settings. Go to SPRO>Production>KANBAN>Replenishment Strategies.
Regards,
Karthik
Similar Messages
-
pls. help my iPhone stuck in recovery mode and iTunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..before it was just stuck in an apple logo but when i tried recovery mode to itunes then it stuck..
Hi awison,
If your iPhone is not recognized by iTunes on your Windows computer you may want to use the steps in this article to troubleshoot -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
This may also resolve your recovery mode issue. If it does not, use the steps in this article to resolve it -
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks for using Apple Support Communities.
Best,
Brett L -
Hi, can someone pls tell me why is it that I can't drag from the itunes movie library to the playlist, but able to drag songs to the playlist. Thnaks.
Are you able to receive any mail at all? If not, make sure that all of your information for mail is accurate in settings again. if you still have nothing, go to your email through safari. (example: www.yahoo.com) If you do not see the emails here either, it is a problem with the password reset server not your mail app.
-
Pls tell me the exact formula for calculation of Safty Stock with quality example
Pls tell me the exact formula for calculation of Safty Stock with quality example
Hi Devendra,
safety stock is a quantity of stock which should be planned to be in inventory to protect against fluctuations in demand or supply. Therefore it is considered in planning.
The Product Planning Details screen is mainly a planning screen, giving an overview on the planning situation for a product in a planning area. The projected stock reflects the planning behavior, displaying the shortages relevant for the planning run.
As the safety stock has to be always in stock, the projected stock takes it into account as an immediate demand. That is why it reduces the projected stock, for example, if the stock on-hand is 0, then the initial planning situation for the product with a safety stock shows a negative projected stock.
For more information please check the help document “Material Planning Settings “ under section safety stock which explain with pictorial rep.
hope it help you.
Regards,
Suresh -
IMG or SPRO Settings for BI in CRM
Hi All,
We are doing a new implementation of BI primarily for CRM but the data also comes from ECC for actuals.
Can someone tell me what are the required / important BI settings that need to be done in IMG for new development.
1. IMG Settings for BI Reporting in CRM
2. IMG Settings for BI Reportign in ECC
3. IMG Settings in BI System
Any input is greatly appreciated.
ThanksPathak,
Thanks for your response. The document is not helpful for what I am looking for.
I want to under what settings need to be made from BI side in CRM/ECC/BI SPRO settings.
This must be standard for all new implementations. I appreciate if someone can share.
Thanks
Raghu
Edited by: Ravi on Sep 6, 2010 6:22 PM -
Can anyone pls tell how to process idoc manually ??
hi experts ,
my process chain got failed at INFOPACKAGE STEP ITSELF which updating data from r/3 to cube via dso ... and in IP monitor screen it is showing that "SOME IDOC PROBLEM "
i went to to BD87 and checked for idocs status ..my outbound idoc has problem .... its saying that "error passing data to port "
and on drilling down, it is showing error msg like """code page couldn't find page for receiving system """"".. (with red status )
,if i process these idocs manually ,will it resolve the issue ?? can any one pls tell me how does this error looks like ???
and can you please tell me how to process IDOC MANUALLY ??
IS IT LIKE "SELECTING IDOC --> RIGHT CLIK --> PROCESS" ??????
please help with your suggestions
HELP FULL ANSWERS WILL BE REWARDED WITH POINTS ..
Thanks in advance ....
Harry1. Status 02 to 03 : RBDAGAIN / Tcode BD83 > Calls IDOC_PROCESS_ERROR function module.
2. Status 30 to 03 : RSEOUT00
3. Status 29 : Problem in ALE settings
You can refer this link for more details : http://goo.gl/p5XPl
See status of record and process below programs using submit report by passing Idoc number
Program RBDMANI2 for status 51 & 52
Program RBDAPP01 for status 64 ,66
Program RBDAGAIE for status 32 and 69 (Edited IDocs)
Program RBDSYNER for status 26
Program RSEOUT00 for status 30
Re-process IDocs failing in 29 status, use program RBDAGAIN.
+ Attention : Use these tcodes with extreme caution+ -
SPRO settings to be reviewed after BI Upgrade
Hi Experts,
Can you please forward me what are the SPRO settings to be taken care of after upgrading to BI 7.0, please forward me any links recommended by SAP.
Thank You!
AMHi,
Pls chk& configure the following settings :
General Settings like printer settings, fiscal year settings, ODS Object Settings, Authorisation settings, settings for displaying SAP Documents, etc.
1. maintain permitted characters (transaction rskc), fill with ALL_CAPITAL to allow all special characters
2. printer setup (trx SPAD)
3.parameter for aggregate (trx rscustv8), aggregate change run, this can be done later or adjust if finding any loading problem
4upload mode for master data
5.ods setting (trx rscusta2), ods data loading performance impact
Links to other systems : like links between flat files and BW Systems, R/3 and BW, and other data sources, link between BW system and Microsoft Analysis services, and crystal enterprise....etc.,
1.maintain control parameter for data transfer(rscustv6) - data loading
2.general connection setting
define logical setting, assign logical setting to client etc.
3.ink between bw and flat file (rscustv1)
setting for flat file upload, override in infopackage
4.link between sap system and bw (rscustv3)
do the first time after bw installation
UD Connect Settings : Like configuring BI Java Connectors, Establishing the RFC Desitination for SAP BW for J2EEE Engine, Installation of Availability monitoring for UD Connect.
Automated Processes: like settings for batch processes, background processes etc.,
Transport Settings : like settings for source system name change after transport and create destination for import post-processing.
1.change source system after transport (RSLGMP)
for mapping source system, done in TARGET (qa/prod)
Reporting Relevant Settings : Like Bex Settings, General Reporting Settings.
1.activate personalization ... (rs_pers_activate)
mostly all are used, but can be done later
web based setting
1.igs setting (if you use chart in web reporting)
Settings for Business Content : which is already provided by SAP.
Please check the links below.
http://www.sap-img.com/business/what-is-spro-in-bw-project.htm
Re: Transaction Codes
Regards.
CSM Reddy -
Dear all, I am unable to use face time. It says "waiting for activation". Pls tell what should I do.
I found a solution that solve the problem, and worked immediately.
FaceTime worked for me since I purchased my iPhone 4 more than a year ago.
It stopped working for me since I upgrade it to ios5.
The reason is that I had Restrictions On: accounts set to "Don't allow changes"
When you set this like that, you naturally blocking iCloud and FaceTime accounts.
To solve the problem go to Settings -> General -> Restrictions, and make sure you "allow changes" to accounts and also enable the FaceTime app to work.
Return to Settings -> FaceTime, and set it to 0 and back to 1.
That should do the trick. ☺
I recommend after to "Don't allow changes" to Accounts and Location, to block thieves disable the "Find my iPhone" functionality.
Good luck!
Christophe -
GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE POWER
Please don't shout.
Has the unit EVER been jailbroke? Has it EVER been dropped? Did it EVER get excessively wet? Did you EVER load a pirated developer's version of the IOS?
If "No" to all the above, first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this. -
Pls tell the revenue account determination Menu Path or Tx Code for PO
Hi all,
Pls tell the revenue account determination Menu Path or Tx Code for PO as we have VKOA in SD, or tell me how to do G/L account determination for PO
Thanx
Vikas Chhabrahi
u can do it in spro>mm>Valuation and Account Assignment>Account Determination>Account Determination Without Wizard>Configure Automatic Postings
t code is OMWB or OBYC
take help of following link
http://www.sapstudymaterials.com/search/label/0170-MM-FICO%3A%20Automatic%20Account%20Determination
regards
kunal -
Error while deploying CMP.. can u pls tell me...
Hi,
Below is the error my jboss 3.2.3 container is throwing when i tried to deploy my CMP entity bean. It says
my ejbFindByPrimaryKey() method must be implemented,but in a CMP i am told the container will take care of the implementation, one just has to specify it in the home object.. can anyone pls tell me where i could have gone wrong.
2004-07-09 12:47:39,825 INFO [org.jboss.deployment.MainDeployer] Starting deployment of package: file:/D:/jboss-3.2.3/server/default/deploy/product.jar
2004-07-09 12:47:40,404 WARN [org.jboss.ejb.EJBDeployer.verifier] EJB spec violation:
Bean : Product
Section: 12.2.2
Warning: The class must be defined as public and must not be abstract.
2004-07-09 12:47:40,404 WARN [org.jboss.ejb.EJBDeployer.verifier] EJB spec violation:
Bean : Product
Section: 12.2.5
Warning: Every entity bean must define the ejbFindByPrimaryKey method.
2004-07-09 12:47:40,419 ERROR [org.jboss.deployment.MainDeployer] could not create deployment: file:/D:/jboss-3.2.3/server/default/deploy/product.jar
org.jboss.deployment.DeploymentException: Verification of Enterprise Beans failed, see above for error messages.
at org.jboss.ejb.EJBDeployer.create(EJBDeployer.java:491)
at org.jboss.deployment.MainDeployer.create(MainDeployer.java:786)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:641)
at org.jboss.deployment.MainDeployer.deploy(MainDeployer.java:605)
at sun.reflect.GeneratedMethodAccessor20.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.jboss.mx.capability.ReflectedMBeanDispatcher.invoke(ReflectedMBeanDispatcher.java:284)
at org.jboss.mx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:546)
at org.jboss.mx.util.MBeanProxyExt.invoke(MBeanProxyExt.java:177)
at $Proxy6.deploy(Unknown Source)
at org.jboss.deployment.scanner.URLDeploymentScanner.deploy(URLDeploymentScanner.java:302)
at org.jboss.deployment.scanner.URLDeploymentScanner.scan(URLDeploymentScanner.java:476)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.doScan(AbstractDeploymentScanner.java:201)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.loop(AbstractDeploymentScanner.java:212)
at org.jboss.deployment.scanner.AbstractDeploymentScanner$ScannerThread.run(AbstractDeploymentScanner.java:191)This is my code
ProductBean
import javax.ejb.EntityContext;
import javax.ejb.EntityBean;
public abstract class ProductBean implements EntityBean {
protected EntityContext ctx;
//All set and get Methods
public abstract String getName();
public abstract void setName(String name);
public abstract String getDescription() ;
public abstract void setDescription(String desc);
public abstract double getBasePrice() ;
public abstract void setBasePrice(double baseprice);
public abstract String getProductID();
public abstract void setProductID(String prodname);
//EJB required Methods
public void ejbActivate(){
System.out.println("ejbActivate called");
public void ejbRemove(){
System.out.println("ejbRemove called");
public void ejbPassivate(){
System.out.println("ejbPassivate called");
public void ejbLoad(){
System.out.println("ejbLoad called");
public void ejbStore(){
System.out.println("ejbStore called");
public void setEntityContext(EntityContext ctx){
System.out.println("setEntityContext called");
this.ctx=ctx;
public void UnsetEntityContext(){
System.out.println("UnsetEntityContext called");
this.ctx=null;
public void ejbPostCreate(String productID,String name,String description,double basePrice){
System.out.println("ejbPostCreate called");
public ProductKey ejbCreate(String productID,String name,String description,double basePrice){
System.out.println("Create method called");
setProductID(productID);
setName(name);
setDescription(description);
setBasePrice(basePrice);
return new ProductKey(productID); // i am not sure which to retun,
//return null;
//Well just on a note for the above
// I READ THAT CMP2.0 MUST RETURN NULL, BUT IN ED-ROMANS MASTERING
// EJB IT SAYS THE BEAN MUST RETURN THE PRIMARY KEY CLASS.
// I HAVE TRIED BOTH THE ABOVE RETURN VALUES, STILL I GET THE SAME
/ /ERROR.
HomeInterface
import java.rmi.RemoteException;
import java.util.Collection;
import javax.ejb.CreateException;
import javax.ejb.EJBHome;
import javax.ejb.FinderException;
public interface ProductHome extends EJBHome {
public Product create(String productID,String name,String description,double basePrice)throws CreateException,RemoteException;
public Product findByPrimaryKey(ProductKey key) throws FinderException,RemoteException;
public Collection findByName(String name) throws RemoteException,FinderException;
public Collection findByDescription(String desc) throws RemoteException,FinderException;
public Collection findByBasePrice(double basePrice) throws RemoteException,FinderException;
public Collection findByExpensiveProduct(double minPrice ) throws RemoteException,FinderException;
public Collection findCheapProducts(double maxPrice) throws RemoteException,FinderException;
public Collection findAllProducts() throws RemoteException,FinderException;
RemoteInterface
import java.rmi.RemoteException;
import javax.ejb.EJBObject;
public interface Product extends EJBObject {
public String getName() throws RemoteException;
public void setName(String name)throws RemoteException;
public String getDescription() throws RemoteException;
public void setDescription(String desc) throws RemoteException;
public double getBasePrice() throws RemoteException;
public void setBasePrice(double baseprice)throws RemoteException;
public String getProductID()throws RemoteException;
ProductKey class - This is my PRIMARY KEY CLASS
import java.io.Serializable;
public class ProductKey implements Serializable{
public String productID;
public ProductKey(){
public ProductKey(String prodID){
productID=prodID;
public String toString(){
return productID;
public int hashCode() {
return productID.hashCode();
public boolean equals(Object prod){
return ((ProductKey)prod).productID.equals(productID);
This is my ejb-jar.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN" "http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar >
<description><![CDATA[No Description.]]></description>
<display-name>Generated by XDoclet</display-name>
<enterprise-beans>
<entity>
<description><![CDATA[]]></description>
<ejb-name>Product</ejb-name>
<home>ProductHome</home>
<local-home>ProductHomeLocal</local-home>
<remote>Product</remote>
<local-remote>ProductLocal</local-remote>
<ejb-class>ProductBean</ejb-class>
<persistence-type>Bean</persistence-type>
<prim-key-class>ProductKey</prim-key-class>
<reentrant>False</reentrant>
<cmp-version>2.x</cmp-version>
<abstract-schema-name>ProductBean</abstract-schema-name>
<cmp-field> <field-name>productID</field-name></cmp-field>
<cmp-field> <field-name>name</field-name></cmp-field>
<cmp-field> <field-name>description</field-name></cmp-field>
<cmp-field> <field-name>basePrice</field-name></cmp-field>
<primkey-field>productID</primkey-field>
<query>
<query-method>
<method-name>findByName</method-name>
<method-params>
<method-param>java.lang.String</method-param>
</method-params>
</query-method>
<ejb-ql>
<![CDATA[SELECT OBJECT(a) from ProductBean as a where name=?1]]>
</ejb-ql>
</query>
<query>
<query-method>
<method-name>findByBasePrice</method-name>
<method-params>
<method-param>double</method-param>
</method-params>
</query-method>
<ejb-ql>
<![CDATA[SELECT OBJECT(a) from ProductBean as a where basePrice = ?1]]>
</ejb-ql>
</query>
<query>
<query-method>
<method-name>findExpensiveProducts</method-name>
<method-params>
<method-param>double</method-param>
</method-params>
</query-method>
<ejb-ql>
<![CDATA[SELECT OBJECT(a) from ProductBean as a where basePrice > ?1]]>
</ejb-ql>
</query>
<query>
<query-method>
<method-name>findCheapProducts</method-name>
<method-params>
<method-param>double</method-param>
</method-params>
</query-method>
<ejb-ql>
<![CDATA[SELECT OBJECT(a) from ProductBean as a where basePrice < ?1]]>
</ejb-ql>
</query>
<query>
<query-method>
<method-name>findAllProducts</method-name>
<method-params>
<method-param>double</method-param>
</method-params>
</query-method>
<ejb-ql>
<![CDATA[SELECT OBJECT(a) from ProductBean as a where productID IS NOT NULL]]>
</ejb-ql>
</query>
</entity>
</enterprise-beans>
</ejb-jar>
This is my jboss.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE jboss PUBLIC "-//JBoss//DTD JBOSS 3.0//EN" "http://www.jboss.org/j2ee/dtd/jboss_3_0.dtd">
<jboss>
<unauthenticated-principal>nobody</unauthenticated-principal>
<enterprise-beans>
<entity>
<ejb-name>Product</ejb-name>
<jndi-name>ProductHome</jndi-name>
<local-jndi-name>ProductHomeLocal</local-jndi-name>
</entity>
</enterprise-beans>
<resource-managers>
</resource-managers>
</jboss>
This is my jbosscmp-jdbc.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE jbosscmp-jdbc PUBLIC "-//JBoss//DTD JBOSSCMP-JDBC 3.0//EN" "http://www.jboss.org/j2ee/dtd/jbosscmp-jdbc_3_0.dtd">
<jbosscmp-jdbc>
<defaults>
<datasource>java:/OracleDS</datasource>
<datasource-mapping>Oracle8</datasource-mapping>
</defaults>
<enterprise-beans>
<entity>
<ejb-name>Product</ejb-name>
<table-name>ProductTable</table-name>
<cmp-field>
<field-name>productID</field-name>
<column-name>PRODUCTID</column-name>
</cmp-field>
<cmp-field>
<field-name>name</field-name>
<column-name>NAME</column-name>
</cmp-field>
<cmp-field>
<field-name>description</field-name>
<column-name>DESCRIPTION</column-name>
</cmp-field>
<cmp-field>
<field-name>basePrice</field-name>
<column-name>BASEPRICE</column-name>
</cmp-field>
</entity>
</enterprise-beans>
</jbosscmp-jdbc> -
Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST
hi all ,
Can any one pls tell me the mandatory fields for BAPI_ACC_DOCUMENT_POST
what all data i need to give to post a document.
Thanks and Regards
JKHi...
part of my source code:
** Header Data " Sending comp code
wa_documentheader-comp_code = 'XXXXX'.
wa_documentheader-doc_date = '20060620'.
wa_documentheader-pstng_date = '20060620'.
wa_documentheader-doc_type = 'XX'.
wa_documentheader-username = sy-uname.
wa_documentheader-ref_doc_no = 'XXxxxxxx'.
wa_documentheader-header_txt = 'Text Header.
wa_documentheader-bus_act = 'XXXX'.
*it_currencyamount
wa_currencyamount-itemno_acc = '1'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = 1943.
APPEND wa_currencyamount TO it_currencyamount.
*it_accountpayable
wa_accountpayable-itemno_acc = '1'.
wa_accountpayable-gl_account = '1234567890'.
wa_accountpayable-bus_area = 'DIV'.
wa_accountpayable-item_text = 'Text 1 XXxxxxx '.
wa_accountpayable-pmnt_block = ''.
APPEND wa_accountpayable TO it_accountpayable.
*it_accountgl
wa_accountgl-itemno_acc = '2'.
wa_accountgl-gl_account = '1234567890'.
wa_accountgl-item_text = 'Text 2 XXxxxxx'.
wa_accountgl-bus_area = 'DIV'.
APPEND wa_accountgl TO it_accountgl.
wa_currencyamount-itemno_acc = '2'.
wa_currencyamount-currency = 'COP'.
wa_currencyamount-amt_doccur = ( 1943 ) * -1.
APPEND wa_currencyamount TO it_currencyamount.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_CHECK'
EXPORTING
documentheader = wa_documentheader
TABLES
accountgl = it_accountgl
accountpayable = it_accountpayable
currencyamount = it_currencyamount
return = it_return.
clear it_return.
CALL FUNCTION 'BAPI_ACC_DOCUMENT_POST'
EXPORTING
documentheader = wa_documentheader
TABLES
return = it_return
currencyamount = it_currencyamount "currencyamount
accountpayable = it_accountpayable "accountpayable
accountgl = it_accountgl "accountgl
EXCEPTIONS
OTHERS = 01.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'. -
Pls tell me how I can convert a PDF form to a Word doc, and have radio buttons etc work?
Pls tell me how I can convert a PDF form to a Word doc, and have radio buttons etc work? My PDF form did convert using Adobe PDF Export.... but the formatting is a schamozzle if I try to do anything with it. Most importantly, I need the check boxes and radio buttons to work in Word!
Checkboxes and radio buttons are form objects from Acrobat. There is no equivalent for these objects, with the way they were constructed, within Word.
I'm sorry for the inconvenience.
David -
Hi guys Pls tell me a way to connect db4 database with jsp and which driver
hi guys
Pls tell me a way to connect db4 database with jsp and
also tell me which driver i have to use
also tell me how to connect with excel sheetstake a look at the follwing links. There, you'll find all what you need :
DB4:
http://www.oracle.com/database/berkeley-db/je/index.html
http://www.oracle.com/technology/products/berkeley-db/je/index.html
http://www.oracle.com/database/berkeley-db/db/index.html
http://www.oracle.com/database/docs/berkeley-db-je-datasheet.pdf
Excel:
http://64.18.163.122/rgagnon/javadetails/java-0516.html
Hope That Helps -
because of to much energy needed some of my usb port in the front hve been unactivated pls tell me how to reactivate these 2 usb port located in front
my mac pro is an early 2008 intel xeon hapertown
thanks a lot
patrick stanley thiolletThought you could use this info about getting FireWire to work! First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 15 minutes. plug it back in and try FW.
If that didn't work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try.
If that still didn't get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
A bad internal PRAM battery can also cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work.
Here's another Fw Faq.
Maybe you are looking for
-
I just got my iPod touch, I updated my iTunes and my iPod is still not showing up in iTunes. It is telling me the required software is not installed even though my iTunes is up to date
-
Will my iPhone 4S with a bumper fit into the iPhone 3G dock?
My iPhone with the bumper on doesn't fit it the iPhone 4 dock. Was wondering if it will fit in the iPhone 3G dock?? If it won't fit in the iPhone 3G dock is there any other one that it will fit into??
-
Setting the background color of the selection when text selected (input TextField)
My input TextField has a black background. The problem is, when some text is enter and then selected, the selection background color remains black and the selected text remains white. Because of this it's imposible to tell that the text has been sele
-
2 iPods, 1 PC, same music wanted on both iPods
I've an old brick 60GB iPod for myself and I've just bought a new nano for my wife. We both like the same music and am frightened of connecting the new nano to the PC in case it wipes the music from iTunes. Any advice on how I can get the same music
-
Template parameters showing reverting to old data
Hi I added meta-data using template parameters. For some reason DW reverted back to showing old meta-data on the page. When I checked the template parameters fields it showed the latest meta-data. it just had not been written to the page. Is this a k