Plse...help me on the communicating between CLEAN ACCESS MANAGER and Switch 3560E-24Ps by snmp

Dear All,
I try to configure in both Clean Access Manager and Switch 3560E-24Ps on SNMP Version 2 protocol but I can't make it working together (For CAM and Switch 3560G-48Ps I can do that). Plse give me any suggestion to solve that problem. All configuration is as below:

http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/412/cam/412_cam_book.html

Similar Messages

What is the difference between trade promotion management and campaign?

Hello all,
I want a clear clarification shows the difference between trade promotion management and campaign management
Regards
Jacopo Francois

Hi,
1)Campaign Management, Here Market do the Mass camapaign in the specific sales area regarding theire Products and Brands (Aware ness of new Products or rebuilding the Brand image ) by spending some Budget.
2) In Trade Promotion, Market makes the Trade agreement ( To sell the Particular Products ) with the Particular BP ( Like Distributor/Whole saler ) by giving the Trade promotional discounts, if he sells will get the TPM discount with in the planned period .
Basically Campaign is using Mass advertise and TPM is to be targetting to the Particular BP to sell theire prodcuts by offering promotional discount.
Regards
Naren..

Connection between lightweight access point and switch?

Hello everybody,
I am a bit confused about cisco 1000 series access point connection. On wireless lan controller and lightweight access point basic configuration example document id 69719 (http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080665cdf.shtml), I understood the access point has two vlans associated with (vlan 3 and 4). Am I correct?
Why is connection between access point and catalyst port just access port rather 802.1q trunk? How vlan traffic can traverse from the access point to controller?
Please advice.
Many thanks,
Nitass

Nitass,
The AP itself does not need to be a trunked port, but the uplink to the controller does. When using a Lightweight enviroment, all the traffic passes thru an encrypted LWAPP tunnel from the AP to the controller, and then gets sent out the correct VLAN interface on the controller.

What software/functions do I need to establish the communication between my C++ program and an instrument having only RS-232 (Singleton Cyclic corrosion Chamber CCT-10).

I have Borland C++ 5.0 with NI-DAQ 6.9 driver for PC-LPM-16PnP, and want to synchronize DAQ initialized from C++ with a certain state of a Singleton CCT-10.

You will need to use the RS 232 port on the computer, not the PC-LPM-16PnP. Use whatever serial functions Borland C++ provides.

Encrypt communication between SharePoint Web App and SSRS

Hi
I have SharePoint 2010 in multi server farm. The SharePoint web app has SSL enabled. The Reporting Server (SSRS) is http URL.
So when the Report Viewer web part is used, the communication between SharePoint web server and SharePoint Reporting Server is unsecured. The existing SSL has hard coded hostnames and for business reasons we prefer not to modify it.
Does anyone know how can I make that communication secured? Do I need to apply new SSL for SP Reporting Services? Is there any other option?

This should get you off and running on SSL
http://technet.microsoft.com/en-us/library/ms345223(SQL.100).aspx
and if you haven't go SQL on SSL - ->
http://technet.microsoft.com/en-us/library/ms189067(v=sql.100).aspx
Stacy Anothersharepointblog.blogspot.com

Difference between nio-file-manager and nio-memory-manager

Hi,
what's the difference between nio-file-manager and nio-memory-manager? The documentation doesn't really discuss the differences as far as I know. They both use nio to store memory-mapped files don't they? What are the advantages/disadvantages of both?
When to choose the first one and when the second when storing a large amount of data? Can both be used to query data with the Filter API? Are there size limits on both?
Best regards
Jan

Hi Jan,
The difference is that one uses a memory mapped file and one uses direct nio memory (as part of the memory allocated by the JVM process) to store the data. Both allow storing cache data off heap making it possible to store more data with a single cache node (JVM) without long GC pauses.
If you are using a 32 bit JVM, the JVM process will be limited to a total of ~3GB on Windows and 4GB on Linux/Solaris. This includes heap and off heap memory allocation.
Regarding the size limitations for the nio-file manager Please see the following doc for more information.
With the release of 3.5 there is now the idea of a Partitioned backing map which helps create larger (up to 8GB of capacity) for nio storage. Please refer to the following doc.
Both can be used to query data but it should be noted that the indexes will be stored in heap.
hth,
-Dave

Difference between SAP Access Control and IDM

Hi Expert,
I have one question What is the difference between SAP Access Control and SAP Identity Management ?

Ali,
That's a good question, but a tough one.
While both applications can do most of what the other can do, it's a matter of specialization in my opinion.
Access Control is all about managing and controlling access to SAP system roles and has the ability to report on role conflicts for compliance and reporting purposes. (I'm sure I'm leaving a lot out, but maybe a GRC / AC expert can fill in more details)
SAP IDM is about managing the user life cycle with regards to landscape and enterprise systems. It will handle the creation, update and ultimately the removal (or de-provisioning) of users in SAP ABAP, SAP JAVA, LDAP, JDBC, and API based applications. It will also do Role Management through a web based UI (User management is web based as well). and as of the latest Service pack for SAP IDM 7.2, it will do attestation (limited certification) as well. It is a definite upgrade to CUA as it will work with a greater variety of systems, include workflows and approvals.
GRC will do some provisioning, but it's somewhat limited, as is IDM's compliance abilities.
The applications are designed to work together, however it does not have a great track record and the integration is typically heavily modified to work as desired.
If you have specific questions, feel free to post / DM. Obviously I am more knowledgeable about IDM, but I'll be happy to help you in any way possible.
Regards,
Matt

Email links out of Practice Fusion are not active (as they are in IE), which they say is a problem with "something lost in the communication between the Flash engine and the browser". Does anyone have experience with this?

This is a medical records system, cloud based. I use Firefox to get into the system, but any browser would work. Other than this problem, Firefox works fine (better than IE, in my opinion).
Patient demographics include their email, which is hyperlinked and should go right to Outlook (my default email program). This works in IE, but nothing happens on the click when using Firefox as the browser.
I queried Practice Fusion, which replied: In regards to your previous question about the email hyperlink in the patient information, it looks this is not something that can be fixed on our end right now. It is the web browsers' responsibility to handle these types of links, and there seems to be something lost in the communication between the Flash engine and the browser. I apologize for any inconvenience.
Thanks for any help anyone can provide.

See if this helps you:
http://support.mozilla.com/en-US/kb/Changing+the+e-mail+program+used+by+Firefox

The connection between your access point, router, or cable modem and the Internet is broken.

At random points throughout my laptop usage, I randomly disconnect from the internet and receive these 2 messages:
1. The connection between your access point, router, or cable modem and the Internet is broken.
2. The default gateway is not available.
It fixes the issue for a short period of time, but constantly happens. This is really starting to annoy me. I have no problems on any other internet, and other people i live with are connected with no issues to the internet. I have tried a number of solutions
online that has "worked" for others to no success such as resetting the router, fooling around with command prompt, and changing the performance settings to not drop internet when low on power. Does anyone have a solution for my technical problems?
I am running Windows 8.1 on a Lenovo ideapad that is less than a year old. I will be honest I am not a very knowledgeable person when it comes to computers, so please use simplified explanations.

Checked this ?
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/window-networking-troubleshoot-error-the/c130ede9-757e-4224-9ae8-3cceb82eeb74
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

What is the difference between base method 0002 and 0011

Hi,
could you please explain what is the difference between base method 0002 and 0011?
0002: Ordinary: no automatic depreciation
0011: Ordinary: percentage from useful life
if we assing base method: 0002 in dep. key? what will happen in future?
if we assing base method: 0011 in dep. key? what will happen in future?
please clarify my doubt.?
Thanks
Indu

Let me clear, I have bought WinSL 8.1 SNGL OLP NL Acdmc Legalization GetGenuine (part
No - 4HR-00400). It means my machine has legal OS and I can use it and I dont need to buy WinPro
8.1 SNGL Upgrd OLP NL Acdmc (Part no. - FQC-08173).
is it?
I believe that is correct. There should be no reason to buy both licenses for one machine. You should verify this with your reseller or MS.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

What is the different between Oracle Process Manuf and Oracle Discrete Manufatur in oracle?

Dear What is the different between Oracle Process Manufacturing and Oracle Descret Manufacturing in Oracle?

Hi Elad,
Depending on the requirement and the availability we go with implementing a particular database.
For xi point of view there is no difference between oracle and SQL database. However you need to intall the drivers of SQL.
Even there is no difference in the communication channel configuration.
Reward points if found helpful.
Thanks & Regards,
Bharath.

The difference between AIR-ANT5135D-R and AIR-ANT5135DB-R

Hi,
Anyone know what is the difference between AIR-ANT5135D-R and AIR-ANT5135DB-R ?
From the dynamic configuration tools for 1252 and 1242, AIR-ANT2422DB-R is inside one of the antenna option.
However, I can't find it in the "Cisco Aironet Antennas and Accessories Reference Guide"
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.html
Inside the document there is only AIR-ANT5135D-R.
likewise for the 2.4 GHz, AIR-ANT2422DB-R is inside the dynamic configuration tools and not inside "Cisco Aironet Antennas and Accessories Reference Guide"
Any help would be appreciated
Thanks,
Richard

Found the difference, AIR-ANT5135DB-R and AIR-ANT2422DB-R are non-articulating antennas.
Thanks!
Richard

What is the diffrence between package javax.sql and java.sql

Is javax designed for J2EE?
And when to use package javax?

Hi,
What is the diffrence between package javax.sql and java.sql?The JDBC 2.0 & above API is comprised of two packages:
1.The java.sql package and
2.The javax.sql package.
java.sql provides features mostly related to client
side database functionalities where as the javax.sql
package, which adds server-side capabilities.
You automatically get both packages when you download the JavaTM 2 Platform, Standard Edition, Version 1.4 (J2SETM) or the JavaTM 2, Platform Enterprise Edition, Version 1.3 (J2EETM).
For further information on this please visit our website at http://java.sun.com/j2se/1.3/docs/guide/jdbc/index.html
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Micro Systems
http://www.sun.com/developers/support/

What is the difference between Wine, Wineskin, Winery and Wine Bottler, and how do I get Wine to *ACTUALLY* work in Mountain Lion?

Ok, so this is my first post here and I am admittedly terrible at forums. Someone might say, "This was addressed in the ___________ thread by __________! Go read it!" --- that may be so but I've spent enough hours trying to google this problem into submission to no avail based on what is apparently working for others, so I would like a chance to get specific answers to specific questions that aren't from Mar 2011, etc.
So first of all, I'm confused by all the various Wine programs/apps/whatevers. I've seen Wine, Wineskin, Winery, Wine Bottler, and at this point I wouldn't be surprised if there are even more than that. What's the difference between all of these and how do they work with one another? What do I actually need to get windows programs working?
All of my google searches have led me to people giving out fish, but no one giving out fishing lessons. I'm not a pro at mac and windows and all that, but I'm a fairly bright individual who gets VERY frustrated, very quickly, when I don't understand the why and how of something I'm attempting.
I've also found "answers" where the person attempting to help starts off helpful enough, but degrades into the most archaic of techno-babble after about 5-6 sentences. On the other hand, I've watched tutorials on youtube where the poster decides to skip (apparently crucial) sections of the tutorial, and mutters such gems as: "... you might wanna have to run Wine first before you can do anything, cuz I think it has to configure it and set up a bunch of stuff"
O.o
A happy medium between techno-babble and the most basic of explanations would be ideal for me, and I'd imagine for others as well.
Here is a summarized history of my relationship with Wine:
Diablo II - I downloaded this awesome thing which ended up being... uh... I guess Diablo II in a Wineskin "wrapper". I'm not sure, all I know is that it's a D2 icon, and if I go to 'show package contents', it's got C drive, Program Files, et cetera inside of it. I double click it, it launches D2, and it works like a dream. <3
'Vanilla Install' - That's what I heard someone call it. It was the command/terminal style install using xquartz and xcode found at http://www.davidbaumgold.com/tutorials/wine-mac/. I followed every instruction to the letter, and got all the way to '$ sudo port install wine', at which point it started going smoothly, free from the possible error he described regarding the installation of xcode, and then just failed after I left the room to use the restroom and came back. Please don't ask me to repeat what the error was, because honestly, after reading more things on the interwebs, I'm confused as to why it's even necessary to go through all of that, so I'd rather not try that route again anyways, rendering the error message quite possibly irrelevant.
Wine + Wine Bottler - So I decided to try to seek out an easier method, as I know that one must exist that doesn't involve command lines. I found a video tutorial at http://www.youtube.com/watch?v=m0BBkISOcEA, and oh man would it be great if that method had actually worked. Again, I followed all instructions provided to procure my free fish, and at the point in the video where he declares that "xquarts or x11 will open" - it doesn't open. Nothing opens. I was trying to install Star Sonata, btw.
So here I am, thoroughly worn out, frustrated at all the random places Wine is installed on my mac now, and just want someone to explain it all, from top down, without getting toooooooo technical on me. I know that might be asking a lot...

## I know that the poster has already found a solution, but the following is a possible answer for others that have similar issues.
For Winebottler, just go to their website and download it. Run the program. Choose .wine as your prefix (best choice) or whatever suits you best. You'll need a functional X11. If you can't use the one that comes with your mac, download the latest one from the website.
If your issue is one with Winebottler's Wine not running correctly due to X11, then you have a pretty ugly problem, although a simple upgrade is the best solution (Upgrade XQuartz.app).
http://www.davidbaumgold.com/tutorials/wine-mac/#part-1
The above website is the easiest way to get REAL wine on your computer. First of all, Wineskin WInery, etc. are NOT WINE. They are 3rd party apps that may use Wine or may have originally part of Wine, but they are no longer up to date with Wine. WineBottler is currently up to date with the stable releases of Wine (but not the maintenence releases).
For the website tutorial and to run Wine on your mac without using a thrid party app, you will need to know a few things.
First, you will need to know basic control of the command line. That means, sudo (you must know the administrator password to your computer), and the forms of cd (change directory).
Second, you will need Xcode. Download 4.2 (stable) or whatever other versions you want, but beware: It is over 1 GB, and you will need time for it to work.
Third, you will need to get MacPorts and configure it. The tutorial should have this data.
When you download wine (use sudo port install wine-devel for the latest development release of wine), it will first download a lot of dependencies. This will take a while. After that, it will download wine itself.
After obtaining wine, to run a program, open the terminal.app window.
cd desktop/XYZ/ZYZ\ WRQ
The above will first enter the desktop, then folder XYZ, then folder ZYZ WRQ. From here,
wine th11e.exe
Or whatever executable you are trying to open. (Using Subterranean Animism as my example).
It should, in theory, run the program. Watch the terminal for errors. If there is an X11 problem, then it's not wine acting up. If the app crashes or has other issues, check the Wine Application Database to see if your app is compatible with wine.
If you have any further questions or other things, feel free to reply; I may or may not get back to you, but there's a good chance that someone will come in eventually. Otherwise, the Wine Wiki should have some information.

Communication between PC/RM Backend and ERP System

Hi,
Is it possible to have communication between PC/RM Backend and ERP System by cresting RFCUSER with user type communications data instead of Dialog user.
Because of audit policy , none of DIALOG user should have SAP_ALL profile.
Is there a option to set up communications between PC/RM Backend and ERP System without a Dialog user setting.
Pravin

Hi Pravin,
You are right and the user should be always communication or system. GRC AC allows for the user to be communication or system. Can you try with PC/RM RFC user and see if it works? It should work
Alpesh

Plse...help me on the communicating between CLEAN ACCESS MANAGER and Switch 3560E-24Ps by snmp

Similar Messages

Maybe you are looking for