PLSQL for Essbase Calculation

Hello All
I was create PL-SQL Essbase XMLA API package for getting EssBase data into pipe-line tables function.
Now you can use PL-SQL for essbase calculation.
Essbase CRC Describe for consultants (ENG)
Essbase CRC Describe for developers (ENG)
Download PL-SQL Essbase XMLA API
ER

And what's the question?

Similar Messages

Business rule for Essbase cube calculations in 11.1.1.3?

Hi,
Can we use business rules to use @XREF from data transfer from one cube to other cube.Why I went for business rule is, I can put set of business rules in a Sequence and any new user can run this Sequence on demand and even we need prompt also in that.
So, I want to clarify whether I can use the business rules for Essbase calculations along with calc scripts??
Appreciate the response.
Thanks

Right,
Actually, Business rules are running essbase cubes in every case.
Remember planning and BRs are adding extra layers like prompts, forms, security, processes...
Think Business rules are extended version of calc scripts with some more functionality. They are ultimately running on essbase cubes...
Regards,
Ahmet

Financial report for essbase and planning application

Hi,
Can any one please explain me what is the difference between creating financial report for essbase application and planning application.
Considering we will have Essbase cube for the planning application
Thanks in advance

Correct, the data that is stored in Essbase will be the same regardless of which connection type you use.
Data that is only stored in Planning can only be retrieved using a Planning connection. This includes Supporting Detail and SmartLists as these are stored in the Planning relational database.
As a general rule I always use an Essbase connection unless i specifically want to get supporting detail or smartlists but that is just me.
Hope this helps
Stuart

Cost center planning for overhead calculation

Gurus,
I have a doubt regarding the cost center planning for overhead calculation.
My scenario is:
There is a service cost center from which a certain percentage I want to allocate to the products as overhead. Now while doing so I have created a cost center and a cost element of type 43 (internal activity allocation). This cost element is the base for overhead calculation. Also I have created one cost element of type 41 (overhead rates). I have defined the credit (of cost sheet) with the cost element of type 41 and the cost center as mentioned.
Now I am facing a problem while planning the cost center with cost element type 43 through KP06.The system is throwing the error message: 'Cost element xxxx can only be used for activity input'. My understanding is we must carry out the planning for the cost center to allocate a certain percentage to the product cost estimate. If I am not allowed to use the cost element of type 43 to plan, what should I use for the planning?
Request your suggestion.
Thanks in advance!
Snigdho.

Hi
Since you mentioned catg 43 cost element, I thought you are using Activuty Type
To apply overhead on the product during CK11N, you need not plan any value on the cost center... The values planned in the cost center can not be used as a BASE in your costing sheet....
It goes like this
1. Your cost estimate has BOM + Routing
2. So, the cost elements that you would see during CK11N, can be broadly classified into 3 types
a. Primary cost ele - Material Consumption accounts for BOM components
b. Secondary cost ele (Catg 43) - If you use any actvity type in the routing
c. Secondary cost ele (Catg 41) - These cost elements are parasites... They need some basis to calculate the overhead value... That basis can be either the (a) or (b) above.....
I think, what you are planning to do is Plan Primary cost ele in a cost center and trying to use the same as the Basis.. That wont work!
What you need to do is
a. PLan the values in the cost center, say, 100,000 USD
b. Absorb it on the basis of 2.a or 2.b
If 2.b is not applicable in your case, since you are not using activity types, then 2.a is the Only option left for you
Hope it is clear....
Regards
Ajay M

Using a "Posting Key" relevant for the calculation of sales

Hi All,
if I make a posting by F-02 using a "Posting Key" relevant for the calculation of sales, I wonder: in which table SAP registers the data of sales?
Is there the way to modify the relevance for sales of that posting?
Thanks

Hi
As far I know, sales figures are getting updated in the following summary tables:
KCN1 for Customer related.
LFC1 For Vendor realted.
Regards

How to set up XMLA webservice for Essbase 7.1.5?

Hi I would like to set up XMLA webservice for Essbase so that I canquery Essbase OLAP databases on the web using XMLA Discover andExecute methods from client application. Will anybody point to the right document / provide me with anyinfo? ThanksShailesh Valera

It is not a supported feature for home screen wallpaper.

How to use accumulate in file functinality for Essbase adapter

Hi Folks,
I need to load Head count file to a Planning application via FDM.
In which for a specific location i need to use "Accumulate in File" while loading data, which is not available for Essbase adapter.
Please some one help me to implement the functionality in FDM.
Thanks in advance.

Use an Essbase Load Rule as the FDM method to load (Integration Setting --> Enable String Load) the data and in the Load Rule itself set the data optoion to 'Add to existing'

Smart View for Essbase Not Available in Planning Rapid Deployment

I have successfully deployed EPM 11.1.2.3 by following the steps in the Planning Rapid Deployment guide (http://docs.oracle.com/cd/E40248_01/epm.1112/epm_planning_rapid_deploy/epm_planning_rapid_deploy.html). However, when I bring up Smart View using a Shared Connections URL of http://<servername>:9000/workspace/SmartViewProviders, I only get connections for Planning and for the Reporting and Analysis Framework. How can a I get a connection for Essbase?

As it turns out, the 11.1.2.3 Planning Rapid Deployment wizard doesn't install Essbase Provider Services, just Planning Provider Services and Reporting and Analysis Provider Services. Until I installed Essbase Provider Services, I wasn't even able to create a private connection to Essbase. I had to run InstallTool.cmd and select "Provider Services Web Application" from the Essbase section of the selection screen. I also had to run the configuration utility and select "Deploy to Application Server" under "Provider Services" in the Essbase section of the selection screen.
After that, I was able to create a private connection to Essbase with this URL: http://<server name>:9000/aps/APS
Although the private connection was now working, the Essbase connection was still not showing up as a shared connection in Excel, when I set the Excel Smart View option for Shared Connections URL to http://<server name>:9000/workspace/SmartViewProviders. I was able to get this working by running the configuration utility again and selecting "Configure Web Server" in the "Hyperion Foundation" section of the selection screen.
I was also able to create an XML file as Celvin suggested, using http://<server name>:9000/aps/APS for the Essbase connection. Thanks for the suggestion!
-Tom

Default userid/password for Essbase 7.1.5

Hi All, I've just now upgraded to Essbase 7.1.5. At the time of installation I gave the 'NAME' as 'James Galt' and system password as 'password'. Earlier on every upgrade it used to recognize the old security file and I could login to a fresh upgrade using my old id/password. But this time it does seem to recognize the essbase.sec file. could somebody please let me know the default user-id password for version 7.1.5, so that I can atleast login and try creating some users. Any help in this matter s highly appreciated. Thanks in advance, [email protected]

There's no such ting as a default user ID and password for Essbase. The system user ID and password is the one you create when you install Essbase. IF you want to reset and start from scratch, delete the essbase.sec file and launch essbase.exe from \essbase\bin. You will be prompted to enter a new user ID and password. Hint : it's not good practive to use someone's name as the system ID. BE aware of a couple of things if you do this, any users, filters, applications, etc you had we'll be gone and have to be re-created. If this was an upgrade from the previous version, upon install completion, you would run the essbase.exe and it would prompt you for the existing password. If it's not working, chances are you are using the wrong password. Remember, the system password might not be the same as the admin password. For instance at my location, when I did the upgrade I entered the admin password and it didn't work. I asked everyone and they said that was the only password. After digging little deeper I found that a couple of years ago it was determined the passwords were too generic so they changed them. While they changed the admin password, the system password stayed the same. After digging, I found out what the old password was and sure enough I was able to fire it up. If you don't have existing apps and users to worry about then just start fresh, but if you want to salvage what you had, then you will need to find the right password. One more thing, if you have Essbase running as a service, disable the service and run it in console mode until you get this straightened out. HTH

Time series functions are not working in OBIEE for ESSBASE data source

Hi All,
I am facing a problem in OBIEE as I am getting error messages for measure columns with Time series functions(Ago,ToDate and PeriodRolling) in both RPD and Answers.
Error is "Target database does not support Ago operation".
But I am aware of OBIEE supports Time Series functions for Essbase data source.
using Hyperion 9.3.1 as data source and obiee 11.1.1.5.0 as reporting tool.
Appreciate your help.
Thanks,
Aravind

Hi,
is because the time series function are not supported for the framentation content, see the content of the oracle support:
The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
Regards,
Gianluca

Alternate base for ED calculation in PO

Dear All,
Kindly guide on below isse.
Suppose I have to Procure material A @ Rs. 100 then its PBXX / PB00 value will be Rs.100 and system will pick this value as Base for Excise calculation however there is a discount of 25% leading the price of the Material to Rs. 25.
Now I want the system to consider this Rs.25 as base for calculation of Excise duty. Please guide to configure the scenario.
I am using TAXINN procedure.
Regards,
Sananna

Hi,
As per SAP standard & statutory norms Taxes such as ED and VAT are always calculate on Gross the condition type for the same is BASB in FI tax procedure. If you wish to add any other condition type such as discount & freight which added to Gross and Excise duties should calculate on this ( Basic+ Freight + discount= Excise 10%) to be calculated in that case in subtotal column of MM pricing procedure you need to enter 4
In the dame way if you wish the system to calculate Excise duties as (Gross u2013 Freight- Discount= Excise 10% ) then you have to adjust in condition record in FV11 for relevant condition type such as JMOP instead of 10% it might be less than 10 you have arrive to that calculation in the reverse way then maintain the condition in the FV11 If you are using TAXINN procedure or if you are using TAXINJ procedure then in FTXP for the relevant tax code you need to change the calculation in the same way but remember if you carry out this changes in FTXP it will be applicable to all the PO which are using same tax code .Hope this clear.
Regards

Base amount for tax calculation in billing document

Dear Experts,
Can you help me in this scenario
when i create a billing document
Selling Price :74,766.36
Output Tax: 5233.65
Final Amount: 80,000.01
the total should be 80,000 in this case as per customer PO.
the actual difference is coming from Tax rounding off done by SAP.Initially we added DIFF condition to adjust the Tax amount.
But it is affecting the Output VAT report, where it shows 0.01 values. business does not want that, so we added DIFF condition to Selling Price.
Net                 74,766.35 THB
Tax                  5,233.65
This is how it post to accounting
01 8000485 Custome. 80,000.00
50 2100100 Revenue Gds - Dom 74,766.36-
50 2623600 Output Tax 5,233.65-
40 2100100 Revenue Gds - Dom 0.01
But the base amount for tax calculation is not chaning even after adding DIFF condition.
   Tax amount         Base amnt           Tx   Tax ra
    5,233.65-          74,766.36-           O7    7.000
           Output Tax rate 7%
Is it possible to change the base amount for tax calculation to include DIFF value?
Can you please advise? If i maintain Tax condition at header level, does this solve it.
Regards
Pradeep

Hi,
Please check your condition type settings for Rounding Rule
may be it is marked as commercial
mark as B and check it might work

Base Value change for CST calculation

Hi,
I've a requirement that CST should get calculated on an assessible value and not on Net Price in the PO. e.g.
Basic Price: 100
BED@10%: 10
ECess@2%: 2
SHECess@1%: 1
Subtotal 1: 113
Assessible Value for CST: 90
CST@4%: 3.60
Total: 116.60
How can we change base value for CST calculation in Tax Procedure?
We are using Tax Procedure TAXINN.
Thanks in advance.
Regards.
Manoj

Hi All,
I got the solution for my issue so closing the thread.
I changed the Tax procedure.Add two new condition types, one for Assesseble value for CST calculation and another one which is a copy of JVCS(CST condition).In case when no assesseble value is maintained, new condition type for CST will be zero.
Regards.
Manoj

Additional Hard Disk Space for Essbase 9.3.1

Essbase 9.3.1 is installed on a hard disk that does not have anymore space. Is it possible to utilize or configure another hard disk for Essbase to use? I'm loading Cubes (ASO) that are failing due to a tablespace error of disk space.
Any suggestions would be of great help.
Regards,
Sudhir

You can specify some of the tablespace and I think temp space for an ASO cube by right clicking on the application in EAS and selecting edit properties. In there you can change the disk

Need Drivers for Essbase 9.3

Hi there,
I need to install essbase on Windows server 2003 however we don't have excel installed on our windows server.
when i try to install essbase client only essbase runtime client and essbase API got installed and it was not able to connect to remote essbase server.
Can anyone please provide me information regarding how to get the drivers for essbase.Or how to install Essbase client on Windows server 2003.
This is very urgent issue pls help....i am bugging the issue a lot.
I cannot contact essbase because i don't have user id etc .
Thanks in Advance

Hi Glenn,
Thanks for your quick response.
What i am trying to do is to install essbase client in Business Object which is in Windows server 2003.Business Object access data from remote essbase cube.
So i need to install drivers or client in my windows server so that we will be able to connect to essbase cube.
In our BO guide it's mention that you need either Excel Add in or Runtime client to be installed in your Server.
I tried in my client machine it works but when i install the runtime client on server i try to connect to essbase cube it doesn't shows Essbase in Provider just like in case of Analysis Server it shows Microsoft OLEDB Provider for OLAP services 8.0,9.0 it does,nt show essbase.So there is somethingt wrong regarding installation.
Is there any issuus like we can't install essbase client on windows server 2003 and we have to install essbase server?How to resolve the issue?
Regarding the Essbase version its Essbase 9.3.1
Thank you
Edited by: 809718 on Dec 1, 2010 9:50 AM

PLSQL for Essbase Calculation

Similar Messages

Maybe you are looking for