Plug-In for slow motion/fast motion effects?

The fact that iMovie '08 does not give us the ability to slow down, speed up, or rewind video kinda stinks. I know that iMovie has it, now, but I don't want to spend the money just for those effects.
Is there a simple plug-in that makes this possible in iMovie '08?
*I want only safe downloads. I will only consider downloading it if you have done it first and there were no viruses or anything.

Doug0301 wrote:
.. Is there a simple plug-in that makes this possible in iMovie '08?
no plug-ins for iM08/09 .. Apple doesn't offer an official API for that..
perhaps, you like the workflow, described on my site, using a free 3rd party tool... :
http://karsten.schluter.googlepages.com/slowmowithim08

Similar Messages

How to properly timewarp 59.94 footage for slow motion effect for 29.97 output

I have footage filmed in 59.94 that I want to use for slow motion effects and output to 29.97. Using timewarp I seem to get duplicate frames at times. What would the best workflow to accomplish the cleanest result? I've tried interpreting the footage at 29.97 and keeping it at its native 59.94. At this point I feel like I'm just confusing myself further by just trying random things. Thanks!

Always interpret footage as what it really is. If it is really 59.94 progressive then that's what it should be interpreted as. It will play at the right speed in any comp of any frame rate. IOW, if the footage is 10 seconds and you put it in a 99fps comp and play it back at full frame rate the clip will still be 10 seconds long. If you put it in a comp that's 15 frames per second, the clip will still be 10 seconds long.
Make sure you understand that.
There is a chance, and a good chance, that your footage is actually full frame 59.94 fps video. That's why I suggested putting it in a comp that's also 59.94 fps and checking for duplicate frames.
There is also a chance that your footage is actually 29.97 fps interlaced. If you separate fields and look at the footage in a 59.94 fps comp you won't see any duplicate frames.
To change the speed of the clip you just need to apply Time Remapping, Time Warp, or any of the other Time Time tools in AE. It doesn't make any difference what the frame rate of the composition is, you'll be changing the length of the clip.
To keep from creating duplicate frames you either need software that interprets the new, extra frames or you need to use an exact whole number multiple of the frame rate for rendering.
Where did you get the footage? What Camera? What are you trying to do with it? What is the final destination (delivery) for your project.

How about using a 60fps video for a smooth slow motion effect in a 30fps project ?

Hey all,
I happen to have a video camera that is able to shoot either in 720p/60fps or 720p/30fps.
As you guessed it, 60 fps mode is very useful for action sports when you want to do some slow motion effect running very smoothly.
I have few questions I would love to be answered, and I was not able to find answers till now.
Here they are :
1/ If I want my final video file to be, let's say, 25 fps, is it mandatory that my project is 25 fps too ?
What will happen if I do a 30fps project and that I export to a 25fps file ? Does Premiere simply remove some extra frames ? Or will it lead to a longer video ? What consequence on the final result if frames are removed ? I mean, will I be able to see any difference or will the difference remain theorical ?
2/ Let's say I have both 30fps and 60fps videos. I set my project to 30fps. If I import my 60fps video to the timeline, it will be adjusted to 30fps and some frames disappear to keep the duration the same. Okay, this is clear to me.
But now, what if I import my 60fps to the timeline, but set the speed to 50% ? Will Premiere apply the 50% to the original file (therefore I should have all the frames displayed on the timeline : 60/2=30 fps), or to the 30fps-adjusted file of the timeline, leading to some jerky footage?
3/ If I want to use my 60fps for slow motion purpose in my 30fps project, would it be a good idea to right-click on this file in the project windows, going to the "modify" menu to set the image frequency to 30fps ?
Because while doing so, if I drag the file to the timeline, I noticed it would last 2 times longer (resulting in a slow motion video) Does that mean that ALL the frames of the original video are displayed ? Can someone tell me what exactly does Premiere ?
I would be very grateful if someone could tell me what are the correct settings to chose in order to realise the best slow motion videos as possible.
Thanks in advance !

With due respect... this does not answer my question and does not help me that much , but anyway, thank you for the very constructive answer ^^.
I'm not sure I would even have considered doing this by myself...
I hope I do not get this kind of answer because you feel like my question was silly or unpolite... To my mind this was a pretty serious question.
Shooternz, next time you need to go 150 km far away from where you are, go by feet rather than with a car, I'm sure you will have plenty of satisfaction too. Just cross the fingers for you not to be in a hurry while it's raining outside.
Well, I may be naive but i thought some experts already had the answer to this (I guess I'm not the only one who intend to do some slo mo), and would have been kind enough to share this knowledge with me. That's what sometimes happens in communities.
Please note I do not intend others to do the job for me, I'm just asking if someone already knows the answer.
I asked this question because I couldn't find any documentation about this, and I guess asking on internet was the next step, as testing would be like the last resort, being very time consuming.
It was easy to check the effect of dragging a file to the timeline to see if it played normally or not, but it's definitely not to count and compare each frame of some sample file to find if some are lacking, or have been doubled or what....
I assume I would be very happy with just a simple theorical answer either...
So once again, if someone already has been into such questions, I would really pleased him or her to share or report what they experienced. Thanks in advance.

Tried to shoot 60 FPS for slow motion, but ...

I have a DVCPro HD clip, 720P, 59.94 frames per second. I was hoping to get a medium slow-motion effect in FCP. So I imported it and put it in a 23.97 frames per second sequence. It shows at regular speed. Hmmm...
I looked at the clip in the Viewer. I found a part of the action that lasts one second, and I counted 60 frames for that second. But in the Sequence, that same action shows only 24 frames.
Then I got a brilliant idea! I used Modify - Speed to slow it down to 40%. I hoped I would see all 60 frames of that one-second bit of action. But instead of showing all 60 frames, FCP uses only about 24 frames, and copies each frame once or twice to stretch out the action. So the action looks jumpy instead of smooth.
A friend last last month shot something with the Panasonic HVX200 at DVCProHD 59.54 FPS, and he got a smooth slow motion effect in FCP. But he moved out and isn't answering his phone.
Any suggestions would be greatly appreciated!

I owe everyone an apology, because I gave the wrong information about the video file. As you will recall, I was frustrated that it appeared to play at only 23.97 frames per second in Final Cut Pro, even though I thought I had shot it at 60 fps. Yesterday I discovered why it appeared to play at a different frame rate, but the reason was so bizarre, so unbelievable, that I began to doubt my own sanity.
Friends, the video clip changes frame rate in the middle! Yes, it does. You see, I had been looking at a portion of the shot with the lower frame rate; later in the same shot, the frame rate increased to 60 fps. You may ask, how is this possible? I do not know. I only know that I shot it with the little Sanyo HD1000 camcorder, which records as AVCHD (h.264), and the clip changed to a slower frame rate when the shot got darker, then back to 60 fps when the shot got brighter. Apparently the camcorder reacted to the lack of light by decreasing the frame rate, in order to have time to gather more light for each frame.

My slow motion effect won't work... HELP ME!!!

I really need some help here. The original version of Imovie that came with my OS X worked great when it came to adding the effect of slow motion with the little bar at the bottom. I just recently purchased the Ilife 05 package and was all excited to get editing... but now I can't get the slow motion effect to work at all. It does all the rendering of the clip but the effect does not appear in my time line!!! What is wrong??? Please help me!!!

Hey Karsten... I'm back again...
Yes you guessed correctly... but I never want to see another pc in my life. Now about my prob... I did as you said and still nada. I wish the upgraded version in the Ilife 05 package still had the slow motion control at the bottom of the main screen like in the prior version, but they have taken it off of the main screen and placed in the special effects folder as "fast/slow/reverse". and it is here that it slows the clip down in the preview and renders the clip with the red bar on the main time line. But the red bar on the bottom of the clip in the time line doesn't move and ofcourse the clip is not put in slow motion.
My brother is quite savy with Mac as well and he can't figure it out either. What do you think???

How can slow-motion iphone6 video be exported to imovie on an iMac and retain its slow motion effect ?

how can slow-motion iphone6 video be exported to imovie on an iMac and retain its slow motion effect ?

thx, i can't see where you do that (access the function to slow the motion of a clip). in the help file it says to 'right click' on the clip to access those functions but when i do i get these optios below (no motion, pan, zoom, pan and zoom). i want access the speed/duration sliders.
i would say the function isn't available at all, but i could be looking in the wrong place (although i have tried everything).
thx for your reply.

New Sequence Question - for slow motion video

Hi,
I'm a very new user of Premier. I've recently had issues with choppy playback of my preview videos. After much research I believe the issue was down to two things. Firstly my sequence did not match my input clip, I had it set to my desired output. Secondly, I was editing video across my network, rather than bringing it locally to my PC. I've fixed the latter issue by copying video files to my local machine and then moving them back onto the network once I've finished editing.
The advice out there essentially seems to be to match your sequence to your primary input video. I've done that and it helps. However, it's raised a big question for me. My input video is from a GoPro and is at 1080p 50fps. I ultimately want my output video to be slowed down to 25fps (resulting in a constant slow motion effect throughout the entire sequence).
If my sequence settings are set to match the input clip (50fps) and I slow the video down by 50%, will that result in an unsmooth video? My basic understanding is that if I slow 50fps video down by 50% then Premier will have to double the amount of frames. Where as previously, if I slowed it down by 50% Premier had enough frames to play with as the output video was 25fps.
Hopefully my question makes sense! Any advice on what the best approach is? Or is this a complete non-issue when it comes to exporting the video (providing I export to a 25fps formart)?
Thanks,

I think you said it OK, you are just missing the right words to do what you want. Let's walk through this for you, and for others that might read it later.
If you take a 50 frame per second video and put it into a sequence created from it, then slow it down 50% it doubles up each frame to achieve slow motion. Not what you want.
If you take a 50 frame per second video and put it into a 25 fps sequence, it drops half the frames to play at normal speed. Not what you want.
What you want to do is interpret the 50 fps video to 25 fps, then drop it into a 25 fps sequence. Each frame will play at 25 fps and generally be smooth as silk.
I don't have any 50 fps clips handy, but here are examples of taking 60 fps to 30 fps. (Excuse the idiot way that we Americans do things. Our 30 is actually 29.97 etc)
First, right click on the clip in the Project Panel, select Modify, and Interpret Footage. Then change the 50 to 25 - similar to this image:

Slow motion effect

I was wondering how to get that slow motion effect that is so commonly used i music videos. I have a canon xha1 that shoots 60i and 50i. To achieve this effect do I do it all in FCP, or is a combination of having the fps high and then the sequence at 24. I could do it in FCP, but it doesn't look clean. If any body has anysuggestions, thankyou. peace. E.

Final Cut Pro can do slow motion with or without frame blending. In both instances you are creating duplicates of frames in order to create a slow motion effect. These look okay in video but with the effects you are talking about are done with large production values where the shots are done with slow mags where the film is running at a high rate of speed to get more frames in an action. There are cameras today that allow you to over and under crank footage but mainly they are tapeless formats where you are recording to hard drives, disks or cards.
you might want to investigate After Effects version 7 or later where it does time warping where individual pixels are blended rather than an entire frame like in Final Cut.

Custom Report for slow and fast moving items

Dear Xperts,
My client wants to develop a new report for slow and fast moving items, I checked the std report MC46 however as per std SAP design this report does not consider the special stock like project stock (Q)...could you please help me to know how can develop this new report with following input and output fields?
Input fields:
Plant
Material
Material Group
MRP Area
Special Stock Indicator
Special Stock (Type)
Output Fields:
Material
Material type
Material group
MRP Controller
MRP Area
ABC indicator
Material price
Category field – Slow, Fast, Non-moving
Current Stock
Last Issue Date
Thanks in Advance
Regards
Rahul

Dear Rahul,
If you required project stock and consignment stock with valuated stock report in same place you need to generate new info structure as given below link. Or you can go with customized report with abaper.
Info structure validation
Regards
Sanjeet Kumar

Video editing 'special effects': can you apply a fast/slow motion effect to video clips?

I haven't been able to find a way to create the effects of fast or slow motion in the video clips. Is there a way to do this? If not, please consider adding it in the full version - I use these effects alot when editing videos.
Thanks!

Hi,
When working with a video layer (clip) in the Timeline panel, either 1.) Context-click on the selected clip (right-click or ctrl-click for mac) or 2.) Click on the flyout button located at the top right corner of the clip.
The "Speed" option should show up in the flyout menu. This is only available for video layers. If you're working with still or smart objects the speed option is not available.

Question about Camera/Premiere Settings for Slow Motion Video

I'm new to shooting video with cameras that have manual options, so I'm not exactly sure how I should set up the camera settings. It's a Canon 60D. Basically in the video I want to make, I'd like to have a lot of normal speed to slow motion transitions. Some of the video footage will be very fast paced, so I'd like to slow it down as much as possible without making the video appear jumpy. I assume I should change the frame rate on the camera to 60 fps. Is there anything else I should adjust within the settings?
I will be editing with premiere elements if you know of any additional tips for that.
Thank you in advance!

The speed of your camcorder doesn't matter. You can apply Time Stretch to any video clip.
There's a limit to how much you can slow it, of course. With that camera and Premiere Elements, you're not going to be able to slow down a water spray so you an see the individual droplets or anything like that. But, if you combine TimeStretch and Frame Blend, you should get very good results slowing your footage down a certain amount.
How much you can slow it and still be satisfied with the results is kind of a judgment call. So I encourage you to experiment and see what your tolerance is.

Best workflow for slow motion from Canon 7D?

Hey guys,
I am working with a slow motion clip for the first time and I am realizing that there isn't really an easy workflow with this. First of all, the clip was filmed with the Canon 7D, 60 fps. When I put in on the timeline, obviously I get rid of the audio. But then if I slow it down to 50% I get the typical frame blending crappy looking image that FCP gives me EVEN THOUGH the sequence settings are set to playing 30fps. In reality, I thought that when I import the clip in the timeline with those settings the clip would automatically be double-length... Stupid me. It's treating the clip like a normal regular clip and so when I slow it down it does the same thing it does with all clips - a terrible job at slow motion. So basically, at 50% it should be playing every frame and there should be no frame blending but apparently that's not the case.
So.. What's the best way to work with this? I tried putting the clip on a separate sequence and then slowing it down which did a much better job but then I had to export the clip out of FCP and bring it back in as a "new slow motion" clip if I wanted to preserve the effect. What happens if I have more than one clip? Is there a way to do "batch export" on all of them at once and not just one clip at a time? What's the fastest and best way to work with a 60fps clip in FCP and mix it in with the rest of my clips which are 30fps without it looking like crap?
I also just found out about Optical Flow in Motion and that's great but wow... the render time is many many hours for a 5 minute clip... that's crazy. I don't have that kind of time.
So... Please help! Thanks guys!

Step 1: Convert to ProRes. Log and Transfer, MPEG STREAMCLIP, Magic Bullet Grinder...whatever. Make it ProRes.
Step 2: Duplicate the clip if you want to also have it normal speed, because Step 3 is not undoable.
Step 3: Take into Cinema Tools and CONFORM to the frame rate you want. 29.97, 23.98...whatever the rest of the project is. This conform is permanent. It takes seconds, but is undoable. Thus what you did in Step 2.
TUTORIAL!
SMOOTH SLOW MOTION FROM 60P USING CINEMA TOOLS
http://library.creativecow.net/ross_shane/slow-motion_cinema-tools/1

FCP 7. Best technique for slow motion

What is the best techique or plugin for effective slow motion?
Right-clicking on a clip and adjusting time is not good. I have tried sending to Motion and adjusting the timing there but it softens the image.
Is Twixtor the way to go??
Thanks

I'm late to the party but somehow I ended up here. I'm reteaching myself this now. I remember Captain Mench had a solution for this on the ProVideoCoalition site at one point for taking 60i footage and conforming to 24p using Shake. The key element was Optical Flow, Motion uses OF as you know. But I've just been doing a bunch of tests all night with some 60p (59.94) that we shot last week. The CrumplePop tut is the one I've been following for Motion 4 and some random youtube stuff using Time Warp for AE tests. The consensus seems to be each technique, including Twixtor, has limitations depending on the footage. AE better in one instance, Motion/Shake/Boris Red in another, Twixtor generally better than everything but still with flaws. Let alone the other factors like did you shoot 60p to begin with? Was the shutter 1/60 or 1/1600? Other great tidbits like this slomo conversion chart and this other Motion tut, 3 steps and bang! I gotta go to sleep, hope this helps.
Forgot this guy, of course he has some great tips from his friend on using Twixtor.

Imovie 08 - Slow motion effect

I have looked through the video and PDF tutorials and cannot see how to put my clips into slow motion. This is addressed in the tutorials for earlier IMovie editions (i.e, Lesson 4 - Motion Effects), but I can't find anything in the video tutorial that addresses this for 08. Clicking and dragging the clip's duration doesn't work.

the actual version of iM08 has no effects anymore..
for 'elaborated' projects, use iMHD6, you get it as iM08-owner for free here: http://www.apple.com/support/downloads/imovieHD6.html
or, for excellent slow-mo, use a free 3rd party app, discribed on my site:
http://karsten.schluter.googlepages.com/slowmowithim08
or, if you want 'serious' movie making, consider the purchase of FCE4 ..

Exporting to mpeg WITHOUT rendering Slow MOtion Effects -Any loophole ???

I have made 2 clips in my timeline slow motion - 20%. In preview
mode when I play back in my timeline the effect looks slow and image
looks great. As soon as I render it - the images become in and out of focus
and looks crummy.
Is there any way for me to export and keep this portion in preview mode
(so it does not render) ? It just looks much better when its not fully rendered...
any loophole to this?

Maybe.
Probably the reason you're getting the effect you're seeing in preview is that Motion is dropping frames to do RT. If you ctrl-click on your sequence and select "Settings...", go to the Render Control tab, and set Frame Rate: to say 50% of Sequence Editing Timebase, that might help you...
Patrick

Plug-In for slow motion/fast motion effects?

Similar Messages

Maybe you are looking for