Plug-in for syncing audio

I have a separate audio track that needs to sync up with video.  There's a nice plug-in for Final Cut Pro that can handle the syncing:  http://www.singularsoftware.com/.   Does such a plug-in exist for Premiere or is there something native in Premiere that can do it?

I am not familiar with any such plug-in.
This ARTICLE covers OOS issues, but it is by hand and eye.
Good luck, and maybe someone else knows of such a plug-in to automate the process.
Hunt

Similar Messages

  • Have a 3rd gen nano, when I plug in  I get "Podcasts on this IPOD cannot be synced because all of the podcasts selected for syncing no longer exist." I have no podcasts in my IPOD or queued in library. Help pls. Thx

    Wnen I plug in my IPOD, I gret the error message " Podcasts on this IPOD cannot be synced because all of the podcasts selected for syncing no longer exist. I have no podcasts in my IPOD or queued in I tunes at pfresent. When I did try to sync a current podcast, nothing happened although the podcasts did show in my library. I did play around with podcasts several months ago, but just listened to them on the computer, the IPOD was plugged in at times though, although not set up...thx

    Click here and follow the instructions.
    (27971)

  • Syncing Audio and Video but wish for the Audio not to move on timeline?

    Has anyone worked out how to sync audio and video within Premiere Pro but have the Audio stay fixed on the timeline and the video move? Every way I try it Premiere Pro insists on moving the audio. Locking the track does not work as you cannot select the audio within it to Sync with.
    I have a music video shoot with 14 camera angles used on the lead singer (don't ask me why). Multi-camera editing is not an option as there are too many sources for my brand new MacbookPro to handle. I think I would need the computer from Superman II to edit that many clips together.
    What I am doing is syncing the first clip, the one Im going to use as the baseline fall back shot and then I need to sync other clips onto the timeline. However Premiere Pro insists on moving the audio to fit with the video not visa-versa.
    Any help would be appreciated.

    @slitchfield: on the mentioned page, it is stated that "Improvements in screen real estate, with slimmer top status bar and optional (in some apps) bottom toolbar, meaning that all phones will have a larger useful display area."
    But on the E6 the bottom toolbar decreases available screen size in most apps, most noticeable in Web browser where the full view has gone. The bottom toolbar is not optional, you can't configure it yourself.
    And: "Homescreen widgets will now come in up to five different sizes (1x1, 2x1, 4x1, 2x2, 4x4) and allow a greater degree of interactivity.", but on the E6 they are in only one size, always with large borders and other visual effects.
    So beware of differences between phones, perhaps some aspects of Belle work differently depending on the type of device.
    "Notes now brings up a white (and AMOLED-unfriendly...) editing screen.": that you can change by switching themes, "Dark Solid for Anna" does a good job. It is a shame that the lines of Notes have gone though.
    When switching themes, I found you have to restart the phone, otherwise the theme doesn't get properly loaded in all apps. Stopping/starting apps is not enough. So when experimenting and loading one theme after another, you may end up with disfunctional combinations of black-on-black and white-on-white, but it may not be due to the last theme. Also you may end up with a good combination that isn't around anymore the next time you restart your phone.
    Current N900 and former E6 user regretting Belle upgrade
    Devices owned: 2110, 2110i, Cellular Data Card, 8110, 7110, 6210, 6310i, 6100, 9500, 6233, 5140i, 3109c, N900, E6-00

  • Exporting synced audio with video for further editing

    I'm exporting DSLR footage with synced audio in order to "bake" the audio in. I'm going to bring the export into Prelude to organize and then back into Premiere to edit. What are the best export settings (including target and maximum bitrate) to maintain top quality footage that I'll continue editing?
    Thanks!

    I'd go with UT, DNxHD or AVC-I for this.
    http://www.videohelp.com/tools/Ut-Video-Codec-Suite

  • Workflow for syncing uncut audio files to a complete cut?

    Hello,
    I've been working on a narrative project (about 30 mins). For various reasons, I was unable to sync audio before editing, and have now done all the cutting with camera audio. We recorded separate audio on a stand alone recorder, and now I want to sync it to the project in CC. There is one audio file for each night of shooting, so the audio is in these giant files not separated by take. Can someone advise me as to the best workflow for this? Clearly it would be possible to do it manually by cutting up the audio files, identifying the proper audio for each clip and lining up waveforms, but this would be incredibly time consuming. It seems that there should be some way to use either Plural Eyes or the new audio sync feature (which I don't have experience with) to sync audio automatically, but I'm not sure how to do this.
    Thanks for the help.

    If it was my task, and I didn't have the recorder files in advance of having to edit, I would probably jot down on a notepad the in/out timecode from the camera for every cut.
    I would then take the recorder audio and sync it up with the original camera audio on a different sequence. This might prove a lot easier than trying to do it in a bunch of steps by waveform.
    Once I had it all lined up, I would make the razor cuts at exactly the same place as the timecode I jotted down on the notepad. Then I would delete all of the audio portions that I didn't want to keep. I would then copy over the audio track to the original sequence and line of the audio with the original sequences cuts, once again using the notepad to keep track of the places where everything fit.
    Painful? Yes, perhaps. But easier than trying to sync up lots and lots of clips.

  • Audio bug with WAV files: use mp3, not wav for syncing long audio files

    Just a tip:
    I've noticed another audio bug in Presenter (including 7.05) but there is a workaround. I often export the audio as a single, long clip from pre-recorded lecture videos, and sync it with the powerpoint slides in Presenter. I've found it easiest to import the long audio file into the first slide, then sync using the Edit Audio window. I find that much easier to use than the Sync audio window.
    However, If you use WAV format for the imported audio file, sometimes Presenter will simply refuse to play back anything beyond about 5 minutes into the timeline in the Edit Audio window. Nothing fixes it - restarting, re-importing, etc. However the problem goes away if you save the audio as mp3.
    Ellen
    http://thedesignspace.net

    Why did you post this in the LiveType forum?
    I would recommending posting your question in the Final Cut Pro forum.
    Have you tried trashing your preferences?
    Anyways... here is a thread with a similar problem:
    http://discussions.apple.com/thread.jspa?threadID=656515

  • Help - missing "External" plug-in for Audio Instruments

    I am trying to set up some external MIDI devices. I understand that the "external" plug-in is available to audio instruments for this purpose. However, when I try to select the plugin in the I/O area for an audio instrument, it does not exist. I have researched this on the web, and cannot find anybody else having the same problem. I have tried verifying permissions and deleting the preferences, but it makes no difference. As far as I can tell, all of the other plugins are available.
    Im running Logic 7.1.1. Can anybody provide an answer (that does not involve re-installing or re-imaging), or give me a clue how to go about troubleshooting this?
    Thanks very much.
    Nick.

    when
    I try to select the plugin in the I/O area for an
    audio instrument, it does not exist.
    Do you have audio inputs enabled on your audio card configuration app?

  • I was using an 3GS which was SYNC thru the iTunes thru my PC  .. But I started using my new 4S and tried to plug in to my PC for SYNC and the New 4S is not identified by iTunes . It

    I was using an 3GS which was SYNC thru the iTunes thru my PC  .. But I started using my new 4S and tried to plug in to my PC for SYNC and the New 4S is not identified by iTunes . It says "the iPhone cud  not connect to iTunes for unknown reasons... Can anyone Pls help me on this as I have no way of SYNC my Contacts from the PC Out look ..

    i just now logged in the icloud from browser, there when you go to contacts, you will see a settings icon to the bottom left of the screen. it does give option to export and import vCards.. i did not see outlook option though.  i dont remember how i did it last time exactly.. outlook does create vcards, right?
    checkout this link, it might help you: http://www.pcworld.com/businesscenter/article/242401/syncing_icloud_with_windows _and_outlook.html
    hope it helps.

  • Sonnox plug-ins for Pro Tools / Audio restoration

    Is anyone using the Sonnox plug-ins for Pro Tools for audio restoration? If so, what is your opinion?

    Welcome to the world of Logic !
    I would recommend the M-Tron Pro and VSE both from G force for strings , flutes , etc. http://www.gforcesoftware.com/index.php
    And Maybe some very simple less polished sounding sample libraries for bass and drums which you could load right into the esx-24 sampler in logic ,but I can't recommend any since A: thats not my style so I don't know the names of some I've heard and B: Sample libraries are a very personal choice.
    I would recommend that if it looks flashy it's probably not going to produce than salt of the earth sound your after though .
    As far as free plugs go Don't crack is the place to go
    http://www.dontcrack.com/freeware/software.php/id/7037/audio/Plug-ins/plugins/AU /
    http://www.dontcrack.com/freeware/software.php/id/7030/audio/Virtual-Instruments /plugins/AU/
    Good luck

  • "Error while trying to sync Audio and Midi"

    "Error while trying to sync Audio and Midi" I have been having this problem now and then for some time. Now, I can't run any audio files without a lot of popping. I tried all the suggestions on the support document for this issue. I even downloaded new drivers from Motu for my Express XT Midi interface and my 828MK11 Audio interface. There has been no change. HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP!!!!!!
    Also, I have tried reseting the 828 to factory default and that does not help.
    Jonathan Jenkins

    Hi,
    I solved my own problem by resetting the factory presets:
    Follow these steps to restore the MOTU 828mkII to Factory Default Settings.
    Disconnect the firewire cable from the 828mkII
    Press the Setup knob
    Turn the Setup knob all the way to the right
    Press the Select knob
    Press the Value knob
    Power off the interface and plug the firewire cable back in
    Power the interface back on
    The same steps can be followed to restore the Factory Default Settings on a Traveler.
    -Robert

  • Error Trying to Sync Audio and MIDI - Please Help!

    Hey everyone, I know this is a fairly common problem, and I've tried following the Logic Help and manual, but it hasn't solved it.
    Last night, I was recording and mixing with my MOTU 828mkII into my Powerbook G4 running Logic Pro 6.4, and everything was working perfectly. Today, when I opened up Logic again to work on mixing the song I recorded last night, after not having changed a single preference anywhere, something bizarre happened. When I clicked the play button, the song began playing, but no sound came out, except for a high-pitched digital howling sound, and after about 5 seconds, an error message came up saying, "Error Trying to Sync Audio and MIDI." I tried other song files I'd recorded months ago, and even with brand new song files, and the same exact problem occurred!
    Apparently, it's a discrepancy in the sample rates between my MOTU and Logic? But both have been set to 44.1 for months, and I haven't changed anything. The Logic Help said to change the Sync Mode to MTC Continuous (which I believe it was already set to) or MTC Trigger/ASD (which didn't help).
    I even tried re-installing Logic altogether, and changing the sample rates both on my MOTU and Logic to 48 and then back to 44.1, and nothing works.
    Please help me! What should I do?
    Thanks very much,
    TB

    I suffered from this problem, and it was particularly frustrating to me since I was not even using MIDI, or so I thought. The "Error Trying to Sync Audio and MIDI" message seemed to crop up just as I was ready to print a final mix.
    I did some research and learned that the Logic automation is actually MIDI data, furthermore, I learned that The sample accurate automation feature in Logic Audio results in randomly sized audio buffers being passed to plug-ins.
    My solution?
    Turn OFF "sample accurate automation" in the menu Logic Pro / Preferences / Audio...
    The automation is very accurate even with this option disabled.

  • IPod not recognized (for sync OR charging) after OS 4 upgrade

    I upgraded to OS4 on Saturday July 10th with no problems. On Sunday (July 11) I used my iPod quite a bit. I was at a friend's house and the battery was getting low so he charged it through his computer. It charged completely and we continued using it the rest of the day. I plugged it in to my PC to charge it Sunday night and it was not recognized at all (for charging OR for syncing) through any of the USB hubs. I asked my friend the method he used to charge it that day and he confirmed it was via computer. Monday night I tried charging it through a friend's iMac. It charged halfway, though it still wasn't recognized. Tuesday morning I tried to charge it on the same computer and I got the "too much power drawn from the USB hub - HUB deactivated" message on ANY of the HUBs. It still doesn't work on my own home computer (though it HAD been working Friday night and Saturday morning pre-OS4 installation).
    I'm personally running Ubuntu 10.04 but obviously only was able to charge the iPod on that system. Anytime I want to sync or download music I restart to Windows Vista (and iTunes).
    I do also have apps installed, but nothing new from the previous OS - (I know that blaming third party apps is a common cop-out answer for apple techs).
    I hope this wasn't too confusing. My real problem is simply described by my subject line: iPod not recognized (for sync OR charging) after OS 4 upgrade. What follows is simply everything I've done to troubleshoot. The only thing I haven't tried is restore...because my iPod isn't even recognized by iTunes.
    I would greatly appreciate any help or stories related stories/situations. Strength (and hopefully solutions) in numbers!
    Best,
    Dan

    Assuming you haven't got the cords mixed up with another, older iPod, it sounds like you have a couple of problems:
    1. Your computer's USB ports have quit working. Reboot your computer and see if they reactivate.
    2. Your friend's iMac generated that message because you tried to charge the device from the low power keyboard USB port. iPods need to be charged off one of the main USB ports or a powered hub.
    3. iPods not being recognized by iTunes can be caused by 1) wrong cable; 2) non-functioning USB ports; 3) iTunes not being the correct version for the iPod OS; and finally 4) Apple Mobile Device Services driver is either stopped, missing, or disabled.
    To troubleshoot a problem with Apple Mobile Device Services, see the Apple support article: http://support.apple.com/kb/TS1567

  • I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

    I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

    Options for when an iOS device gets locked because of forgotten passcode:
    Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
    iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
    If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
    If recovery does not work there's:
    DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
    How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

  • Plug-in for StarTech Video Capture Card

    StarTech'website shows their ECHDCAP ExpressCard video capture card supports Adobe Premiere CS5 plug-in for editing. I talked to a Tech at StarTech and he said the card should work with Premiere Pro CS5 & CS6 but StarTech doesn't support it, and he didn't know where I can get the Premiere SC5 plug-in. Does anyone know what plug-in StarTech is referring to, and where I can get it?
    If anyone is currently using the ECHDCAP capture card or the StarTech USB3HDCAP Capture Device, please let me know how you got it working with Premiere Pro.

    Ann & Bill,
    I probably should have given you more information. This application is different than what I usually use Premiere for.
    One of my hobbies is shooting long range rifles at 1,000 yards. I'm trying to capture the point of impact on steel targets 500 to 1,000 yards away. I've attached my XA10 to my Swarovski spotting scope so I can see the impact. I've been transferring the video from the XA10 to my computer through the USB port, then importing the video into Premiere and adding it to the sequence. By the time I get all this done, then scrub the video to find the frame with the initial BANG, then count 41 frames forward for 870 yards, then scrub the video again to find the impact point, the wind and several other conditions have changed which affect my next shot. this makes for a long and tedious day.
    The bottom line is... I'm trying to streamline my workflow so I can capture the video from my XA10 straight to a Premiere sequence, then start scrubbing the video to find the point of impact.
    The reason I'm using Premiere is because none of my other programs allow me to scrub with audio.
    I would prefer not to spend $600 for a Maxtor MX02 Mini and ExpressCard adapter; especially since it requires 110 volts and that's not available at the shooting range.
    If you know of another way to do this, or can recommend an inexpensive program that will allow me to capture audio and video from my XA10 and scrub it with audio, I'd sure appreciate hearing about it.
    Thank you,
    Brian Scura...

  • Dropped frames or out-of-sync audio

    Using Sony HDR-FX1 and FCE-HD is set to DV-NTSC. I've also tried DV-NTSC Firewire Basic. I've been trying various suggestions I've found in the Discussions to cure dropped frames that prevent me from capturing and out-of-sync audio making footage I do capture useless. Mac is running 10.4 with 5.5 GB of RAM and dual 2 GHz G5.
    I'm capturing to my main hard drive which has plenty of space - when I'm done editing, I archive old footage on an external drive.
    "Abort capture on dropped frames" is currently checked. Lately, this means I can't get more than a few seconds without the capture stopping. This never used to happen, now it happens all the time no matter what tapes I'm capturing from.
    If I uncheck it, the audio on the captured footage is out of sync. Over time, as I've been trying to trouble shoot this using the Discussions, my projects remain unfinished and deadlines are looming sooner and sooner.
    If someonce could please help me I'd be very grateful.

    Hi(Bonjour)!
    Did you shoot in DV or HDV ?
    Did you try to capture HDV with Apple Intermediate Codec 1080i60 (or 50 for europe)?
    Does you downconvert HDV shooted to DV upon capturing from camcorder ?
    DV-NTSC 48 kHz is the way to go with downconverted material.
    Does your DV audio setting is 16 bit on FX1 ? (HDV is a fixed one).
    Michel Boissonneault

Maybe you are looking for