Plug In Headphones then iPod Freezes...

I'm having a strange problem that is really annoying me because it makes my iPod of no use. Whenever I plug in any headphones, speaker, headphones that came with the iPod everything will slow down (like the album pictures scrolling by on the main menu) and then lock up. If I push buttons I can hear a beeping. If I had music playing before plugging in anything it will continue to play until I press a button and then the iPod is locked again. I have to use the Middle button + Menu reset to get it working again. I have tried what support for iPod Nano page told me and that didn't work. I have restored the iPod twice and that still didn't work. I'm at a loss for what to do right now. Is there something that I can do to fix this?

Does the same thing happen when you plug the ipod into the usb connection? If so, your headphone jack is shot and you need a new one.

Similar Messages

  • Screen blips.. wipes.. to black.. then iPod Freezes (version 1.2)

    My Video iPod has been acting up. The screen will blip then wipe to black.. and then freeze.. (sometimes with partial screen showing).
    Is this a software or hardware issue? if it is software, where/how can I reset back to other software or get a patch, etc.?
    Thanks
    mdoney
    iPod 30GB   Windows XP  

    Have you been through these?
    The Five Rs.
    It sounds like the iPod may need service.
    You can arrange online service here.
    Service request.

  • Satellite C50-B-12V- can mic still work even after I plugged in headphones?

    Hello,
    My Satellite C50-B-12V comes with only one port for headphones, and microphone. thus, if I'm on a Skype call and want to hear clearer - so I plug in headphones, then the other party stops being able to hear me - presumably because my plugging in headphones disabled my microphone - thus I can now hear better - but my voice isn't going through the computer anymore.
    I understand I can correct this problem by buying an audio y cable - which will make my 1 port for headphone/microphone into two ports - thus I can then plug in headphones and also a microphone - and the problem should be solved.
    My question is, is there anyway I can set my computer to somehow not deactivate my microphone when I plug in headphones? Meaning - I would plug in headphones so that I can hear the other party better - but the computer external microphone would still be working?

    Hi again
    I have tested it on my machine a bit using Skype audio settings.
    Here is how it works on my Satellite S50-B
    When I use right headset (mic and headphones in one port) everything works as usual. Internal mic is OFF and I can speak through mic on headphones.
    If I use my standard Logitech headset and connect headphones only, internal mic works anyway. So my voice is recorded through internal notebooks mic but I can hear sound on the headset.
    There is no option where I can switch between internal or external microphone.
    Can you please test it with your headset?
    Which headset do you use exactly?

  • Ipod freezes during sync then error that it cant read file...

    A little pre-info... I have owned a black 30gb 5th gen (video) Ipod for a couple of years now. I plug it in fine, my computer recognizes it fine, Itunes works fine with it... everything works great.
    I just bought another Ipod off ebay that is exact as mine except white- auction states the Ipod works fine, seller has awesome feedback, etc.. I bought this for a gift for my sister for Christmas. It is second hand, so warranty is expired.
    I plug it in the computer, and first tried to transfer some normal text data via explorer. I had put this same data on my own black Ipod with no issues, words fine. The white? Lo and behold I get that "Data Cycle Redundancy" error during copy. My experience is that that has always meant that the original file is messed up, not the destination its being copied too... but in this case I know the original file(s) were/are ok.
    And the Ipod freezes. So I safely unplug, and try to hard reset it. It wouldnt for a bit, and I noticed the Ipod was rather warm (but this might be because it was frozen for several minutes with the backlight still on as well). Finally I get it to reset. Same stuff happens again, again its hard to reset.
    So then I decide screw it, forget adding the stuff via explorer, Ill just try to get the music on my computer at least, over via Itunes, after I first restore the Ipod.
    Itunes opens... recognizes the Ipod... I go to copy music, and it copies until it essentially 'freezes'. I tried many times - its not a bad file because the same file would copy the other times Id try. It would freeze on any random file, during the write process.
    Then Itunes comes up with this error:
    "the ipod cannot be synced. the required file cannot be found"
    I dont think this is referring to my files trying to be copied, they werent deleted or moved from their location since importing into the Itunes library. Im wondering if theres a system type file on the Ipod that Itunes speaks to as it transfers...and when the Ipod freezes... hence it cant be found...
    At the same time I get this error from Itunes, I get a Windows XP bubble pop up that says:
    "Delayed Write Failed - Windows was unable to save all the data for the file x. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere."
    Now again, my computer/windows is NOT the issue. Its the Ipod.
    All the advice I have searched says to fix things on my computer. That includes that Apple support page in regards to those errors - it points the finger at my USB ports, etc - and thats simply not the case. If it was, my other Ipod wouldnt be working either - nor would my flash drives.
    Its the white Ipod.
    I saw one site suggest to format the Ipod via Windows first, then do the Itunes restore, but the Ipod froze and Windows couldnt format.
    I went into Device Manager and compared the two Ipod settings, both share the same settings. They are not set on 'enable write cache'.
    I have tested the HD via Diagnostics, and the BL blinked after the test, showing the HD passed... so right now I can only think of three things... a bad logic board perhaps, or the Ipod system files are corrupt somehow no matter how many times I do the restore... should I revert to an older update; is that even possible. Or the HD is bad after all and its just being missed in the test.
    So now... I need help. Am I missing something important? Is it a simple fix... a corrupt file thats freezing the Ipod somewhere - or did I get a bad Ipod from the seller.
    Its so close to Christmas, if there was some simple fix(instead of it being a bad HD) I could fix it myself, Id rather do that than go through the hassle of returns/refunds. Not to mention, its always a gamble how the seller will react. Will they help, or say its not a problem on their end and try to screw me... then Ill have to go through Paypal for reimbursement and that takes 90 days at least...

    I wish I had good news but all I have is information. I have access to 4 5th gen ipods. 2 black 30s and 1 white 30 and 1 black 80. The one white and one of the blacks work and have worked flawlessly for the past two years. The other black 30 and 80 started having the issue mentioned here some time after upgrading to iTunes 8. I tried to lowlevel format the iPod drive to fix any issues and that didn't cure the problem. I bought a MacBook a couple of months ago and restored my ipod to Mac format and low and behold it would accept files again! However it wouldn't let me fill the ipod beyond about halfway, this was on both ipods. Now the ipods have become slowly less and less fillable. Seems like syncing rather than putting the songs on manually seems to help, but again its getting worse all the time. (the two ipods that don't have any problems belong to my girls and the problem ones belong to my son and i) <- Grasping at straws I know, but my son and I are constantly changing the songs, playlists, videos and such.
    When I bought my Mac the guys at the Apple store were shocked that I was having this problem and practically begged me to bring it in so they could see what it wrong with it. I will post an update when i do that.

  • Why does my ipod touch 4g do this when i plug my headphones in? (not your usual headphone question)

    Can anybody help me out? I bough my Ipod Touch on December 26th at about 11 am. I took it home registered it all all of that stuff, downloaded some apps and put music onto it. I then proceeded to use my headphones with my ipod and everything worked fine. Then at about 9:30 pm i went to listen to my music once again and when i plugged in my headphones the weirdest thing happens. The screen changes to the black screen with the apple logo on it (like the one after you restart your ipod) but it also has a little (i would call it) buffering symbol (the circle made up of 12 individual lines) located at the bottom of the apple (Apple logo). That screen stays up for 5 seconds and then switches to my lock screen which stays up for only 1 second and then the cycle begins again. It never ends! I don't understand!!! I didn't even have it up and operating for 12 hours!! I am looking to see if anybody has any ideas about what to try. I have tried doing all of the below:
    - switching off the password lock
    -switching the lock to 'never'
    -restarting my ipod
    -turning it off and then plugging in my headphones then turing the ipod back on
    -started playing a song over the speaker and then plugged in the headphones
    -turned off all applicaitons etc.
    11
    *** The headphones still work I can hear an alert sound through them as the screens change, and i have tried a multitued of different headphones with my ipod***
    i am in the middle of downloading the latest version of itunes/software for my ipod because i am also trying to get imessages-- i was hoping that that would work to get it on there- and now i am hoping it works for my headphone problem (do you think it will) .
    *** as soon as i unplug my headphones the ipod goes back to the lock screen, i unlock it, and it works normally (even if i dont have the lock screen/password turned on)
    please please please please help This is my first ipod touch and i have no idea how to solve this problem
    **ps if you can tell me how to get imessages that would be awesome too

    Not an expert, but plug it into your computer.  If it comes up hit sync.  Unplug it and see if it works, if not, plug in again and hit reset (I don't have the screen in front of me, but I know you get a main screen on iTunes you get an opption to upgrade or reset.)  When you reset it's kind of like nuking and paving.  It will erase your internal memory completely and reinstall everything on it.  Make sure you have updated your computer using software update first.  It takes a while, but that should fix it.

  • Ipod freezing itunes when being plugged in and not recognised

    hi,
    can anyone help me... i have an 30gb ipod and have tried everything to get it working with itunes. It works fine with others computers but with mine it just freezes itunes. As soon as i plug my pod in it freezes itunes. Sometimes if i'm lucky it starts to update it but then after 5 minutes it freezes itunes again. I have tried the 5 r's. I have installed the latest SMTP driver for xp. I have tried everything that apple have suggested on there sopport pages and nothing has helped. I have even reformatted my laptop just to get it to work but no luck.
    If someone could please help me it would be much appreiated. It was a christmas present from someone close to me and don't wanna give up on it because have all ready spent many late nights on it.
    Thanks

    I get exactly what your describing and I noticed we are using the same laptop!!
    I did not notice originally as I've got an old 40gb click wheel, about 3/4 years old. The battery is not great so assumed it may have been that but even fully charged I'm getting no luck.
    I also followed the 5 r's and all the other suggestions for Ipod in My compute but not in itunes but nothing has worked. I cannot get my laptop to recognised my ipod via Itunes but it see's it fine via My Computer.
    Both the Ipod and Itunes work fine without each other, Ipod plays songs fine etc and Itunes downloads music from cd etc and still performs all the usual functions but nothing else works.
    I'm desperate for help as I run every day and buy a new cd each week and at this rate I'm going to have to dig out my old CD player!
    Also just a point of note I looked the price to get my Ipod serviced as I figured this may help but the price quoted from apple was £160+...you can get a new 30gb for less...talk about customer explotation!!

  • When i plug my headphones into my ipod touch 5 i cant hear any music i tried 2 different headphones what should i do

    when i plug my headphones into my IPOD touch 5 i cant hear any music i tried 2 different headphones what should i do

    Hey Ehlam Managua, You have tried a different set of headphones, still no joy-- OK. (1st step in trouble shooting completed). Just to be clear the sound still works through the speaker, correct? If so, try quickly plugging / unplugging the headphone jack about 12 times, there is a tiny switch inside the port that may be stuck closed. If so the plugging / unplugging should free it up. If still no joy, have you tried turning your iPod off then turn it back on? If that doesn't work go into Setting>General>Reset then tap Reset All Settings. If still no joy, connect with your computer, make a full set of backups from this iPod to your computer, then Restore to Backup. If still won't work, Restore to New. If still nothing, could be dealing with a hardware issue. Contact your Apple store and set up an appointment to have your iPod evaluated.

  • My ipod freeze every time i plug in the computer i need help plz

    my ipod freeze every time i plug on my computer i dont know how to reset and delete all songs plz help u.u

    Does your iTunes see your nano?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod: Appears in Windows but not in iTunes
    If so, then follow through this:
    How to reset iPod
    Restoring iPod to factory settings
    If not, do one or more of the following
    Restart your computer
    Uninstall & Reinstall iTunes [Windows XP] [Windows Vista & 7]
    Reset iPod (will NOT delete everything)
    Go to My Computer (Windows XP) or Computer (Windows Vista & 7) and see if it shows
    Restore iPod (WILL delete everything)
    Make sure iTunes and iOS firmware is up to date.
    Hope all this helps.
    Message was edited by: keeferaf

  • HELP !! My iPod keeps freezing i can go on it for about 10 secs then it freezes, i have to keep restarting it and it doesnt show up on itunes when i try to restart it please HELP

    I can go on it for about 10 secs then it freezes,
    i have to keep restarting it and it doesnt show up on
    itunes when i try to restart it please HELP!! >.<
    HASNT BEEN JAILBREAKED ASWELL

    - Try a reset. Nothing is lost
    iOS: Troubleshooting applications purchased from the App Store
    - If still problem, see it iTunes nows sees the iPod so you can restore the iPod.
    - Next see if placing the iPOd in recovery mode will allow a restore. For recovry mode:
    iPhone and iPod touch: Unable to update or restore
    - Last, try DFU mode and restore.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • I just received a brand new iPod touch as a gift. But when I try to play music on it the speaker is extremely slow. When I plug in headphones I hear nothing. Tried multiple headphones. Tried a restore.

    I just received a brand new iPod touch as a gift. But when I try to play music on it the speaker is extremely slow. When I plug in headphones I hear nothing. Tried multiple headphones. Tried a restore.  It never dropped or anything 

    Try here:
    iPod touch: Hardware troubleshooting
    You said you restored the iPod. Was the restore successful, that is, it went though all the steps without errors?
    Try a restore to factory settings/new iPod if yuhave not doe so so far.
    Are you  using the headphones that came with the iPod? Are you inserting the plug fully
    Have you tried another set of headphones in the iPod?
    The speaker is not that loud.

  • Sound on my iPhone 4 , turns really low when I plug in my headphones or a device then turns back to normal when I plug the headphones/device back out , tried turning off , using the troubleshoot turn off and shouting at it please help

    The sound on my iPhone is perfect until I plug in speakers or headphones
    Then the sound halves and won't turn all the way up, when I do turn it up the
    Sound just switches off till I turn it back down low to wear it works ,
    When I unplug headphones/device sound returns to normal

    Normally, an iPhone will remember what you had your volume set to right before you unplugged your headphones last and set the volume back to that when you plug them in again. Do you have a habit of tuning your volume down before unplugging?

  • Why does my 3rd Gen iPod Touch still play through the speaker when I plug my headphones in?

    When I plug my headphones into my iPod, it plays through them, but it also continues to play through the built in speaker. Does anyone know how this can be fixed? Thanks

    - First see if it woks OK with another pair of headphones.
    - next, to rule out a software probem:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup
    - Restore the iPod to factory defaults/new iPod
    If still problem you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.  It is liklely a problem with the headphone jack i the iPod.  There are third-party places that will replace he jack.
    DigiExpress.us - The iPad Repair Professionals

  • To whom it may concern I would like to inform you about an error occurred when I upgraded my firmware to IOS 6 When I plug a headphone/earphone into my, then unplug it, the volume turned out to be unadjustable I have attached 2 screenshots of the error, p

    To whom it may concern
    I would like to inform you about an error occurred when I upgraded my firmware to IOS 6
    When I plug a headphone/earphone into my, then unplug it, the volume turned out to be unadjustable
    I have attached 2 screenshots of the error, pls help?
    Thanks.

    Try a rest: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

  • When I plug my headphones into my Ipod touch and listen to music, the volume automatically reduces slowly so I cant hear anything.

    When i plug my headphones into my Ipod touch and listen to music, the volume automatically reduces slowly so I can't hear anything. Please help.

    Thank you. That is good information.
    Does this mean that there is nothing I can do about the delay? When I think of a delay, I think of maybe 10 seconds. I am having to wait for a minute or more for my audio to switch. While I wait, I have no audio and any audio program hangs. Is there a setting I can change? It seems rather ridiculous that I have to wait so long just to switch from internal speakers to headphones.
    It is like this on other Mac machines? Or it is just my iMac? I hate to compare Mac to Windows, but on Windows or Linux computers the switch is instantaneous.

  • IPod freezes as soon as i plug it in

    My iPod freezes every time i plug it into my computer. it charges when i plug it into my printer but i cant get it to work on my computer so that i can restore it before it freezes. what should i do??? my iPod is not registered, but i do not think that would be the cause of it not working.

    I have very recently bought ipod classic 80GB and i did register my ipod and was able to transfer a song via iTunes 7.5,but from the next day it started behave very strangely.Whenever i connect the ipod into my windows machine,the ipod freezes,dont even charge and it dont even start even if i disconnect it,i have to reset the ipod to protect it from the battery drain.Its been so pathetic that i haven't even listened to single song i fear that its going to be an expensive apple's paper weight.
    I dont think the problem is with the laptop or the connector cables,as i tried using the laptop with another classic ipod which doesnot seems to exhibit any such strange behavior.
    Please help me to resolve.

Maybe you are looking for

  • Why is the Firefox mobile (14) service consuming 79MB for the single tab in which I'm entering this question?

    I love the performance of the new beta, but since install (phone or sd) the prog has gorged on memory. After adding a tab with some media the mem load jumps to 169MB (half the available on my Nexus One). Memory consumption grows so fast that I can't

  • Where can I get CS4 (Windows) install media?

    I am migrating from one PC to another, and I want to install my registered CS4 Master Collection onto the new machine. Unfortunately I cannot find my install DVDs! I have contacted Adobe and have spoken to Provantage, the reseller where I purchased t

  • Why doesn't my non-linear curve fit finish?

    I am working with an experiment that gives me X- and Y- data that I need to fit to a theoretical model (somewhat involved). I use to do this in matlab using the "lsqcurvefit", which works fine, but for varous reasons I need to do this in LabView inst

  • IMovie quit unexpectedly. Please help :(

    While exporting this video as 720p HD, it quit unexpectedly. Process:         iMovie [286] Path:            /Applications/iMovie.app/Contents/MacOS/iMovie Identifier:      com.apple.iMovieApp Version:         9.0.8 (1778) Build Info:      iMovieApp-1

  • Tunning during selection

    Hi Experts, I have wrote a select statement as below and basically it is taking a lot of time to execute this particular statement. Can anyone guide me to make the below statement to execute faster. i_vbfa = standard table i_likp_lips = standard tabl