Plug_in:how to unlock a locked document use acrobat API
how to unlock a locked document use acrobat API.in acrobat plug_in
how to unlock a locked document use acrobat API.in acrobat plug_in(Which API can enter a password to unlock the locked document)
Similar Messages
-
How to unlock a locked ipad It is locked and now i can not unlock it, the screen is not responding to my sliding the arrow to unlock. can someone suggest what should i do?
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad/iPod into Recovery Mode
http://support.apple.com/kb/ht4097 -
How to unlock icloud lock of my iphone
how to unlock icloud lock iphone 5
i brought this phone in 2013 and i am sure its a new phone,coz in front of me only the phone is unpacked .
the ever biggest mistake i made is that time i was not aware abt apple id n i told them to activate the phone for me.the guy who is dealing with the software installation activated my phone with his id it seems. May be after couple of weeks i started facing problem like every time it was showing for the apple id password was incorrect.That time a friend created one new apple id for me and i started using that with out any issue. All these happ after the release of IOS 7.1.2 , one day my wife by mistakely formatted iphone with out disabling the Find my iphone option and all these mis happ started.
my question is finally i found that guy who activated my phone ,but he is telling the apple id wat he is using is with domain hotmail.com
n not sure abt the id [email protected] where showing as the id used for activation, as this was happened 2 years before. Is there any possibility where the same id can be used now as same ID with some other domain( for eg domain of our primary mail id present in the apple info like [email protected])
i searched in the check activation lock status its shwoing locked with some id not in the theft mode or lost mode.
is there any possibility where i can view watz the full id used to activate the phone -
HT1937 how to unlock my Iphone to use another carrier
How to unlock my iphone to use a different service provider. I put in SIM but it says no service.
Ask the carrier it's locked to if they'll unlock it. Nobody else can.
(104766) -
Reg:how to post the parked documents using BDC
Duplicate message in General deleted. Please do not post the same question in more than one forum.
Hi
I am creating parked Documents using FV50. I am able to check them using FBV0, I am able to select and post the documents using the same transaction. Its working fine. However I want to post the selected parked documents using BDC. I am having problems as the output in FBV0 is in ALV report format. HAving problems selcting the parked documents to be posted. As there any way to post the selected parked documents using BDC.
Please suggest me a solution for this.
Thanks,
Satish
Edited by: Matt on Dec 3, 2008 7:40 PMHi Rob,
Thank you for ur reply, can u send that code how u post the parked documents using BDC for FBV0 transaction. Please send the code.
Thanks,
Satish -
HT4993 how to unlock my passcode without using itunes
how to unlock my passcode without using itunes
cannot be done without itunes
http://support.apple.com/kb/ht1212 -
How to unlock iphone 5s to use for a different service carrier
I bought a iphone 5s off ebay and it is through a sprint carrier and I had it flashed to straight talk and I got the sim activated for it but its not verifying the sim so im trying to figure out how to unlock so I can use it
court2014 wrote:
I bought a iphone 5s off ebay and it is through a sprint carrier and I had it flashed to straight talk
Then you should contact StraightTalk -
Getting Error:Digitally Signing documents using Acrobat SDK
I am using following API's to digitally sign a document using Acrobat SDK but getting error(return code -2) while making a call to folllowing API DigSigCommitSigRefDict(ASAtomFromString("DocMDP"), tempDict, &pOutRefDict);
What am i missing?
Here's my code.
CosObj sigDict = CosNewDict(cosDoc, true, 1L); //Signature Dictionary Cos Object
CosObj sigRefDict= CosNewDict(cosDoc, true, 1L); //Signature Reference Dictionary Cos Object
CosDictPut(sigRefDict, ASAtomFromString("TransformMethod"), CosNewName(cosDoc, false, ASAtomFromString("DocMDP")));
CosDictPut(sigRefDict, ASAtomFromString("Type"), CosNewName(cosDoc, false, ASAtomFromString("SigRef")));
refArrayObj = CosNewArray(cosDoc, false, 1L); //Reference array object inside signature dictionary
CosArrayInsert(refArrayObj,1, sigRefDict);
CosDictPut(sigDict, ASAtomFromString("Reference"), refArrayObj);
CosDictPut(sigDict, ASAtomFromString("Type"), CosNewName(cosDoc, false, ASAtomFromString("Sig")));
CosDictPut(sigField, ASAtomFromString("V"), sigDict); //SigField is an AcroForm object
DSSigRefDictParamsRec myDSSigRefDictParams;
myDSSigRefDictParams.size = sizeof(DSSigRefDictParamsRec);
myDSSigRefDictParams.cosDoc = PDDocGetCosDoc(pdDoc);
myDSSigRefDictParams.rootObj = cRoot;
myDSSigRefDictParams.sigDict = sigDict ;
myDSSigRefDictParams.transformMethod = ASAtomFromString("DocMDP");
//myDSSigRefDictParams->transformParams =
myDSSigRefDictParams.bIndirect = true;
DSSigRefDictErrParams errParams;
DSRetCode retCode = DigSigNewSigRefDict(&myDSSigRefDictParams,errParams);
CosObj pOutRefDict;
retCode = DigSigCommitSigRefDict(ASAtomFromString("DocMDP"),sigDict , &pOutRefDict);
retCode = DigSigFinishSigRefDict(ASAtomFromString("DocMDP"), sigDict , pOutRefDict,errParams);
-amitThanks for the tip George. I'm using Acrobat Pro X to create a form. Can you tell me how to make the form reader-enabled so that it can be digitally signed?
Josh -
I am trying to convert a PDF to a Word document using Acrobat Pro 9 but am unable to find "Content to edit" under tools. Do I need a newer version?
Acrobat 9 Pro (not Standard) can export ("convert") PDF to Word, RTF, or other text formats.
Click-path: File - Export
Take your pick.
With install of Acrobat 9 the Help PDF is installed also.
From the this PDF's Bookmarks expand Chapter 5's bookmark and select "Convert PDFs to Word".
Be well... -
How to create a project templace using a API?
Hi all,
I can create a project using API PA_PROJECT_PUB.create_project, but how to create a project templace using a API?
thanks for your any effort.
CarilHi Caroline:
If sub projects are not supported currently, does the EDK API support creating the project folders under a project? Please let me know.
Thanks.
Bhanu -
Error opening DRM PDF document using Acrobat Reader
I am having problem opening a DRM PDF document using Acrobat Reader. When I open the document I get a message if I want want to connect to xx.xxxxx.xx server (Allow / Disallow), I click Allow then I get this error message without prompting me for the login box.
"An error occurred while performing this operation. Contact an administrator if this problem continues."
What is strange is that when I open the document using Acrobat Professional then there is no error and I get login box.
I tried this in Acrobat 8 and 9 Reader with latest updates.
Please help.The problem is the enhanced security, turned on by default, in Adobe 8.2 and 9.3 - specifically restrictions on cross domain scripting.
You need to install a crossdomain.xml file in the root of your application server.
See the Enhanced Security and Troubleshooting Guide and FAQ: http://learn.adobe.com/wiki/download/.../Enhanced_security_faq.pdf
And the Cross Domain Policy File Specification: http://www.adobe.com/devnet/articles/crossdomain_policy_file_spec.html -
Fail Updating Document Using DI API in Form_Data_Update_Event
Hi,
B1 2007B PL14
I have problem updating document using DI API in Form_data_Update_Event.
I have made sure that beforeaction=false and actionsuccess=true (to me, this means that B1 has completed the update process), then my codes will be executed to update the same document using DI.
However, I notice that when my codes is executed, the document form is still in "Update" mode, that this results in the system returning error message "another user-modified table (odbc-2039)
Any suggestions?Hi Shahid,
I am not sure what your question is. The code you pasted looks like the MatrixAndDataSources example that comes with the SDK. What are you trying to do?
Thanks,
Adele -
How to retrieve data from MDM using java API
hi experts
Please explain me the step by step procedure
how to retrieve data from MDM using java API
and please tell me what are the
important classes and packages in MDM Java API
thanks
ramuHi Ramchandra,
You can refer to following links
MDM Java API-pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2d18d355-0601-0010-fdbb-d8b143420f49
webinr of java API
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/89243c32-0601-0010-559d-80d5b0884d67
Following Fourm Threads will also help.
Java API
Java API
Re: usage of java API ,
Matching Record
Need Java API for Matching Record
Thanks and Regards,
Shruti.
Edited by: Shruti Shah on Jul 16, 2008 12:35 PM -
How to reverse an image acquired using IMAQ APIs in vc++
how to reverse an image acquired using IMAQ APIs in vc++
When using imaqFlip, may the source and destination be the same Image* ?
TIA!
Jesse -
How to find a annotation object using plugin API?
How to find a annotation object using plugin API?
You would use PDPage methods to find out how many on a page, and to
get them in turn.
Aandi Inston
Maybe you are looking for
-
'Field Catalog not Found' - ALV Grid using CustomContainer+Fcat
The Following piece of code throws 'Field Catalgo not found' Please give me necessary changes in the code. Thanks & Regards Harsha Ch. *& Report ZCHK_ALV_CUSCONT1 * REPORT zchk_alv_cuscont1
-
Anyone here using Linux VServer with Arch ?
Hey There, I'm writing a how-to document on the wiki.. ([url http://wiki.archlinux.org/index.php/Arch_VServer]Arch VServer[/url]) I'll do it on my machine but need to know if someone has already tried it or even using it on Arch.. I'm currently follo
-
[SOLVED]Can Some Processes Not Run In Background
Hi, Can some process just not run in the background? I have an irc bot and I want irssi to continue running even after I exit. I do $irssi ctrl-z bg But after bg it says [1] irssi & [1] irssi STOPPED I've also tried sending the kill CONT signal but i
-
Can't simulate Clocking Wizard in ISE 14.7
Hi! I have developed a simple design for a VGA module where I need to produce a 40Mhz clock out of 100Mhz input for an Artix-7 (XC7A100T-CSG324) on an Digilent Nexys4 evaluation board. In order to aquire this clock I have used a Clock Wizard for a DC
-
Unable to restart and other oddness.
I'm currently on my 3rd install of Leopard on this laptop hoping that something would change but It hasn't. Once I'm logged in on my account I'm fine until I try and restart or shutdown. I'll look like I'm going to do either but it goes to the time m