Plug - in installing trouble

I'm having trouble seeing and installing plug in-s to aperture. I am having a go at the picaso plug in but i do not see it anywhere.
This is of course part of my mission to photo share to clients once apple have finally pulled the plug on mobile me gallery, the trouble this has caused and is stil causing me is unbelievable!
Thanks

Dave,
I am having a go at the picaso plug in but i do not see it anywhere.
Do you mean the Aperture-Picasa plug-in? This has been discontinues. I just recently found it at this mirror site -
Aperture Picasa Plugin 32: Free Download
http://mac.softpedia.com/progDownload/Aperture-Picasa-Plugin-Download-50358.html
Try xternal mirror 2
Regards
Léonie

Similar Messages

Flashplayer plug upgrade/install 11.6.602.180 failed because Trojan Horse

flashplayer plug upgrade/install 11.6.602.180 failed because Trojan Horse was detected by my antiviral software.
Please can you help?
Prof_ST

Hello Wojislav,
Thank you for your prompt response. Yes, I can do that but don't you think that it would be preferable if the installer/update script didn't evoke this response? None of my other software updates does and while I would like to trust people, these days it gets harder and harder when folks are willing to lie and cheat at the drop of a hat and without compunction. It does not help either that false sites (Adobe mimics) have been installing Trojan Horses so it would be safer all around to remove that foible. It is just not very good. Or at least, it does not look very good, which amounts to the same thing at first glance.
Thanks again for you concern.
Prof_ST
On Mon, 18 Mar 2013 00:06:45 +1000 Wojislav <[email protected]> wrote -
Re: flashplayer plug upgrade/install 11.6.602.180 failed because Trojan Horse
created by Wojislav in Installing Flash Player - View the full discussion Modify antivirus
Script for automatic updates some programs identify as a Trojan horse
you have to put in trusted sources adobe installer
or simply do the following: disable antivirus, install adobe, Switch on antivirus
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5154714#5154714
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5154714#5154714
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5154714#5154714. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Installing Flash Player by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Can someone enlighten me re: Adobe plug-in install they have 2 for 15.0.0.189. A plug-in install

Can someone enlighten me re: Adobe plug-in install and Adobe system manager plug-in install fo 15.0.0.189? Is there a difference? Thanks!

Yes!
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
When you have installed the latest version of Flash, relaunch Safari and test.
If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
click Check Now. Quit and relaunch your browser.

HAVING INSTALL TROUBLE? Large list of suggestions/info/solutions in here.

This thread is about installing Leopard and includes information related to install only - not running Leopard after install.
It includes information about preparing to install, and some stories of successful installs using a variety of methods. Feel free to add your own story of success.
It also includes some workarounds/solutions to a few install problems I've seen.
Here's my story:
I've been researching before I do my own leopard install on a dual 2.5 G5 10.3.9 system.
This forum is helpful, but it would be nice to see some solutions compiled into a single thread, so I've assembled a few things I found while poking around for a couple days. Nothing formal, and I have very little technical expertise - these are mostly copy/past from surfing and a couple insights I had during the research.
Everyone's computer rig is different. No single solution works for everyone, and its possible that all this info may prove useless to some, but at the least it is something to read/learn from until Apple puts together help articles.
There's very little analysis of what's wrong & who's to blame, just a bunch of stuff that might help when installing Leopard, so here you go:
Macworld article advising/describing how to prepare BEFORE installing leopard.
http://www.macworld.com/2007/10/secrets/tcoleopardupgrade/index.php?pf=1
A free 26 page freebee teaser of a $10 125 page downloadable "book" on how to prepare for install
http://www.takecontrolbooks.com/samples/TCoUpgradingLeopardSample-1.0.pdf
Webpage for the downloadable book (I have no affiliation with the author & am not attempting to promote him)
http://www.takecontrolbooks.com/leopard-upgrading.html?14@@!pt=MW-EXCERPT-TCUL1
this poster has helped with a couple post install bugs & airport issues
http://discussions.apple.com/profile.jspa?userID=103923
An Apple discussion thread on preparation ideas
http://discussions.apple.com/thread.jspa?threadID=1208202&tstart=315
Here's a couple websites that might provide helpful info
http://macfixit.com/
http://www.macintouch.com/readerreports/leopard/index.html
A thread I put up that lists DVD drives posted by users who are experiencing "problems" with their DVD drives.
Accurate or not, useful or not, just a list of people wondering if their DVD drive is to blame (or not).
http://discussions.apple.com/thread.jspa?messageID=5719301#5719301
*Here's my own distillation* (accurate or not) of some pointers/ideas/suggestions -- all found here -- that relate to overcoming "problems" related to installing Leopard.
1. Do everything you can to prepare for install with any info you can find here or on the net (backing up, learning about & choosing install type, preparing install destination, checking hardware/software, etc etc)
2. After putting in the install disc, allow DVD test - if it fails return the disc for another
- installing with a disc that fails the test is a common theme in a number of threads here.
3. Restart holding down the C button
- forces a start from the DVD
4. Burn a copy of DVD disc to standard thickness DVD -R
- Some have reported certain DVD drives won't read it. Perhaps due to how thin it is.
5. Try choosing to install just the base operating system, no fonts, no extra applications, no extra languages
- someone posted the base system may be on layer one (most readable by all DVD drives) of the DVD install disc
- layer 2 (some drives might not be able to read 2 layer dvd well) may contain everything outside of base OS install
6. Remove all but stock apple ram
- this is inconsistent solution, but has worked for many
7. Install with another mac's dvd drive via firewire target mode (detailed below by someone else)
- if your dvd drive won't read/result in a successful install, maybe another one will.
- put dvd into another mac's dvd drive
- restart that mac holding down the T key
- connect it to your mac & launch the install disc on the firewire target mode mac
8. Erase and zero the hard drive you're going to install to - if partitioning, be sure to format correctly for machine
- users say it takes more time, but makes sure you have the disc formatted correctly & provides a better "environment" for the install
*A few person observations/opinions (accurate or not)*
1. Keep it simple:
- Installing to a apple ram only machine with a clean, zeroed, correctly formatted hard drive is the easiest thing for the Leopard installer to do.
- Installing to the opposite environment (lots of non-apple software, interface hacks from 3rd party programs, ram that might have un-noticeable glitches, dirty DVD drives, hard drives that are over 60% full etc.....) makes it more challenging to achieve a successful Leopard install. Even with that, hundreds of thousands (2mill copies sold) have probably had successful Leopard installs with the "update" or the "archive & install" methods.
2. Where do you want to spend your time?
- After reading the time investment from users that have posted about botched installs -- Sometimes it takes a lot less time to backup, verify backup, erase, zero the disc, format, install Leopard, install all programs, install all program updates & transfer all user info and libraries -- and do that once, than to correct a botched install over & over & over.
3. I've done both archive & install and erase & install. Do whatever works. From what I've read though, the Leopard DVD install disc appears to have some strict tests/parameters and if they aren't met it won't successfully install, so putting the odds in your favor might be a good idea.
*Now on to some successful install stories/methods/pointers:*
---------------backup, erase, zero disc, fresh install (remember to verify/test the backup)---------------------------
I just got Leopard and I backed up all of my data, erased the hard drive using Disk Utility with the zero all data option, I installed Leopard, installed all of my applications and copied my data back over without using the migrate manager. So far, I have not had one single problem with Leopard on my MacBook. Everything is running smoothly, So I highly recommend erasing your hard drive with Disk Utility using the zero all data option, installing Leopard, install your apps and check for updates for each application, and then copy your data from your backup. I have a close relative who is a Mac Genius for one of Apple's retail stores (for 6 years) and he says that everytime there is a new OS release, people have all kinds of problems because they did an Upgrade install rather than the process I described above. Yes, it's time consuming but it will save you a lot of trouble later. Apple should strongly recommend doing an erase and install rather than just upgrading. I think it would solve a lot of problems and prevent a lot of headaches.
-------------Erase & Install method vs upgrade method-------------------------
Have installed Leopard on both my computers. On the MacBook I did an erase and install and it has worked flawlessly. On the iMac I originally did an upgrad install that went pretty well, but I was having a number of minor issues like many of the posts here. After doing TimeMachine backups for two days I decided to do an erase and install on the iMac and then use the TimeMachine backup to only restore my data. Since doing the the erase and install on the iMac I couldn't be happier. The iMac is running like new and the TimeMachine backups restored flawlessly. Note: I manually restored the files from the TimeMachine backup on the external drive. Now TimeMachine is doing it's first backup on the "new" iMac and has recognized the old TimeMachine backup and is just adding to it. Of course the computer name and user names are identical to what they were before doing the erase and install.
-------------------Install via upgrade method (with good preparation)--------------------------------
For those of you who may be hesitant about installing Leopard on an older Mac this may be encouraging.
I installed Leopard onto a Rev B 12" PB (1GHz 768 MB RAM). Prior to installing I verified the Macintosh HD and did an extended hardware test from the PB install disc. I used the upgrade method to install Leopard as I did from Panther to Tiger on the PB and from Jaguar to Panther to Tiger on my G4 iMac. FileVault was enabled.
The install took 2 hours to the minute from clicking on Restart in Tiger to logged in to Leopard. 28 minutes of this was taken up by the install DVD verification process. You could skip this, but having read all the posts on these boards about defective DVDs I let it run. The install took a long time to calculate 'time remaining' and eventually gave this as 3 hours 52 minutes, although as I've said, it was less. There were periods of several minutes where nothing seemed to be happening - no hard drive or DVD drive activity - but I resisted the temptation to intervene. There were especially long pauses at 1:42 and 13 minutes to go. The 'about a minute' took 17 minutes during which time my fingers were twitching.
The restart after installation seemed vey long (as always) but there was no double-restart a la Tiger updates. I can confirm there is no longer a 'Loading Mac OSX' screen with progress bar. You go straight from blue screen to log-in window. All system prefs were as I'd had them in Tiger. Apps launched slowly while Spotlight was indexing but are back to normal now. All apps seem okay including Office:Mac 2004. Word took a long time building the font menu so I've probably got a horde of duplicates again.
-----------Installing from a DVD COPY of the install disc-----------------------
I copied the Leopard disk to a blank, double sided DVD. The copied DVD happily started, performed an archive and install without a glitch, and now I have Leopard up and running.
---------------Installing with firewire "target disc" method & how to use disc utility to aid install------------------------------------
ATTENTION EVERYONE- you can run disk utility without having a system installed. This should be your first step in trying to fix the problem!
Boot off of your Leopard or Tiger disk by holding down the "c" key at startup. When you are prompted with the install screen, instead of installing, go up to the menu bar and select the "utilities" menu, and scroll down to disk utility.
There are many different things you can try with disk utility. There are a few things you should try first before taking a dive and erasing your entire disk.
1. If you click on your Hard disk or volume, at the bottom of the window a bunch of general information about your drive will pop up, such as size, format, etc. One of the last things told about your drive is its S.M.A.R.T. status. This is basically a protective measure for you, so you can check and see if your drive is doing alright physically. This isn't completely foolproof, as your drive could still have problems even if it isn't reporting it through the S.M.A.R.T. status. But if your drive is reported as failing, then you can be sure your hard drive needs to be changed. Otherwise, move to step two.
2. By clicking on your Hard disk or volume, you can also repair permissions and repair disk. If you are having problems with your install or problems after the install has already been done (such as freezing on the blue startup screen), you will want to run both of these. If volume errors are reported back as unfixable, you may want to think of trying to salvage your files (if you don't backup) by purchasing an external firewire drive, installing a system on it and pulling your files from your internal hard disk onto the firewire drive. If all problems are corrected, then go ahead and try the install again.
3. There is also a tab at the top of the disk utility window that says erase. Here, you can wipe your disk totally clean. Typically, you can't wipe your startup disk clean when you are booted off of the harddrive, because erasing requires that you unmount the disk, in which you can't unmount the startup disk, since the OS is running off of it. Only if you have multiple hard drives or a boot disk (such as leopard or tiger) can you erase your original startup disk. So if you have no further options or do not care about your existing data, go ahead and wipe the disk clean. Also make sure the disk is formatted in Mac OS extended (HFS+). From there, you can go ahead and try the installation.
Here's some more info on disk utility, and some other ways to check disks through single-user mode-
http://docs.info.apple.com/article.html?artnum=106214
Besides disk utility, there are some other ways of getting the install to work. One of the simplest ways is to use target disk mode. This is for those of you who have more than one mac, preferrably a desktop and a laptop (otherwise you'll have to move both desktops to the near vicinity of one another.). It requires you to hook the computers together using a firewire cable, and allows you to mount the harddrive of one computer onto another. This is a great tool for transferring large files, diagnostics, and bypassing installation problems. This would probably be a solution for anyone who installed Leopard on one computer in their house and got it to work, but couldn't get it to work on another computer (the OP). I've also heard that it bypasses the minimum requirements needed to install Leopard (min. 867 mhz processor). The procedure requires that (with both computers off) you first hook a firewire cable between the intended computers, by plugging one end into a firewire outlet of the first computer and the other end into a firewire outlet in the second computer. You then start up the computer that had Leopard successfully installed on it (or the one that didn't fail during installation). Once it is fully booted and at the desktop, hold the "t" key on the keyboard of the other computer (the one that failed the installation) and start it up. Continue holding "t" until you see a firewire symbol bouncing around on the screen. You should then see the drive mounted on the first computer as a firewire drive. You will be able to access everything on the harddrive as normal. You can forget about the computer with the firewire symbol bouncing around on it from this moment on. Now, put the Leopard install disk in the DVD drive, hold the "c" key and restart the computer. It will boot off of the install disk, as normal, but now you should have the option to select the disk of the other computer in target disk mode. Choose the disk and start the installation. Then cross your fingers!
More information on target disk mode here-
http://docs.info.apple.com/article.html?artnum=58583
If none of these options work, then report back what happened after you tried each of them, and we can try to solve the problem on a case-by-case basis.
-------------Install to an external partitioned firewire disc---------------------------
I used my 1000 mhz APS partitioned G4 Cube to install 10.5 on an External APS partitioned Firewire Disk. (If you attempt to install from a GUID partitioned disk like the Intel MB Pro, it requires the External disk to also be GUID...). That installation was a simple "Install" procedure. No problems.
------------Install with 2 hard drives method, cloning & import from previous machine---------------
After reading much here and elsewhere I opted to do a clean install followed by an 'import from previous machine'
1. Carbon Copy Clone your 10.4 disk; this will act as the backup you should be taking anyhow and the source for your import.
2. Test your backup (you do test your backups on occasion right?) boot into your newly installed copy and look around, you should find everything works as it should, if not check your copy options and try again.
3. Disconnect your backup/copy, insert your 10.5 media and do a clean install, configuring as you may (there is a good amount of space to save in printer drivers and alternate languages).
4. After you've finished the install you will be given the option to import files from another mac or mounted volume, attach your backup, import it; select what you want, I wanted all files but you could choose to take this as an opportunity to clean up, 132 GB of data took about 2 hours to walk through on my MBP.
5. I am running from this now and am quite happy.
6. Keep your 10.4 backup copy for a couple of weeks just in case, create a new backup set with time machine?
YMMV but enjoy.
-------------if your destination drive to install on doesn't show up right away-----------------
I have a fix for you. This was brought up in another thread, and I had the same problem. The solution is so ghetto, but it really works. Here is what you do:
When you get to the select a destination screen, go to the utilities menu and open up Disk Utility. You'll notice your hard drive is there, but it's missing the Mac OS X partition. This is the trick: wait about 10-15 minutes, and come back. Your partition will now be showing. Simply quit Disk Utility and return back to the installer. It should work from there.
--------------If having prob w/ dual layer disc---------------------------------------
I did a successful custom install by removing every single install package other than "base system". My prior attempts had always kept the Printer Driver package but removing the fonts, languages and X11 install packages. Removing the Printer Driver install package finally did the trick.
The Leopard install disk is dual-layer. My PowerBook G4 1Ghz Titanium has a single layer DVD drive. The basic Leopard OSX install package is on a DVD layer that is readable by older, non dual-layer drives; the other "accessory" Leopard install packages(i.e; printer drivers, X11, language) are on a DVD layer not accessible with older DVD drives. The Leopard install program incorrectly assumes everyone has a dual-layer DVD drive and subsequently "chokes" on the install when trying to install packages from the inaccessible DVD layer. This is how I ended up with repeated "EXCLAMATION!" ....."could not validate the contents of....." errors.
-----------1 users solution to exclamation mark on install problem-------------------------
I got a giant exclamation mark when installing on my iMac too. Turns out there was some trifling problem with my hard drive. Here's what I did to fix it:
1. Boot from the Leopard DVD.
2. Select Disk Utility from the Utilities menu once the installer starts.
3. Click the drive you tried to install Leopard on.
4. Click Repair Volume.
5. Brew a nice hot cup of tea.
6. If it finds anything wrong it will attempt to fix it and will display a message describing the problem.
7. Quit Disk Utility and install as normal.
This wont necessarily work for everyone as there are many things that might cause the exclamation mark to appear.

I'm not really sure what method that person was talking about. I just read he had a successful install so I posted it.
But I'll hazard a guess
1. copy your entire drive to a backup drive
2. boot into that drive and test it out - make sure its a flawless backup, it works, and the hard drive has no problems
3. eject that drive, disconnect it and reboot into the leopard install dvd
4. erase your main hard drive using disc utilities on the leopard install dvd -- you've made a backup, made sure that backup was good, and disconnected it so it's currently safely disconnected from the leopard install you're about to do. Also, on the hard drive you're erasing and installing leopard on to, many people recommend "Zeroing" it as well as erasing it. That option is part of the erase function in disc utilities on the leopard install disc.
5. do a clean install of leopard
6. follow step 4 from that original post exactly as that person described to do.
7. read the rest of what they said
That's pretty much it. With the backup/erase/clean install/import/ you pretty much get everything you need exactly the way you want it with very few things missing -- and you've done this over a clean install. Plus that poster did mention that you can select what you want to import from your backup hard drive.
It sounds like its a "clean install" method that gives you control via "import from machine" option in the installer. Control over what parts of your "old mac" you want to import into your "new leopard mac".
Hopefully that helps. It sounds more involved, but its actually pretty quick and provides you with a perfectly save backup in case anything goes wrong with the leopard install.

Fresh OS X install: Trouble booting, crashing.

Hey Apple Community,
I have an iMac 7,1 - mid 2007, 24 inch. About a week ago my iMac (gradually) became very slow, and crashed regularly. Trouble booting as well (booting took ages, with the grey progress bar on the white screen) At that time I was running Mountain Lion.
To fix the problem, I did a fresh install of Snow Leopard, and upgraded to Mavericks.
After this there was still trouble booting, sometimes just a white screen, or a white screen with an apple logo. About one out of five startups are succesful and get me into Mac OS X successfully. (Disconnecting all peripherals gives me a higher success rate.)
When OS X has booted successfully, my iMac is extremely fast, except at some point it just freezes, I just get the round rainbow cursor, and the only way out is a hard reset with the power button.
Since the problem started, there's a process called "kernel_task" that is always using the most memory of all processes (about 400 mb), at all times. However, my RAM or CPU isn't using the maximum capacity, and I have plenty free CPU or RAM.
My system specs:
Modelnaam:          iMac
Modelaanduiding:          iMac7,1
Processornaam:          Intel Core 2 Duo
Processorsnelheid:          2,4 GHz
Aantal processors:          1
Totale aantal cores:          2
L2-cache:          4 MB
Geheugen:          4 GB
Bussnelheid:          800 MHz
Opstart-ROM-versie:          IM71.007A.B03
SMC-versie (systeem):          1.21f4
Anyone knows what's going on? Hardware issue maybe?
All help is appreciated.

Thanks for your reply. I've already tried the steps mentioned in the trouble-shooting tips on the gray screen, didn't help. :/
I've used the EtreCheck application, gave me these results:
Hardware Information:
          iMac (24-inch Mid 2007)
          iMac - model: iMac7,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          ATI,RadeonHD2600 - VRAM: 256 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 0 days 2:18:46
Disk Information:
          WDC WD5000AAKS-40YGA0 disk0 : (500,11 GB)
                    EFI (disk0s1) <not mounted>: 209,7 MB
                    Macintosh HD (disk0s2) / [Startup]: 499,11 GB (483,87 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Inc. Built-in iSight
          Apple, Inc. Keyboard Hub
                    Primax Electronics Apple Optical USB Mouse
                    Apple, Inc Apple Keyboard
          Apple Computer, Inc. IR Receiver
          Yamaha Corporation Steinberg CI1
          Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Gatekeeper:
          Mac App Store and identified developers
Kernel Extensions:
          [kext loaded] jp.co.yamaha.driver.YamahaSteinbergUSBAudio (1.8.1f1 - SDK 10.6) Support
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
User Launch Agents:
          [failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
          [loaded] com.google.keystone.agent.plist Support
          [running] com.spotify.webhelper.plist Support
User Login Items:
          iTunesHelper
          Spotify
Internet Plug-ins:
          FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.201 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
          Flash Player Support
          Yamaha Steinberg USB Support
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               2%          WindowServer
               1%          fontd
               0%          PluginProcess
               0%          com.apple.WebKit.Networking
               0%          com.apple.WebKit.WebContent
Top Processes by Memory:
          180 MB          PluginProcess
          143 MB          Safari
          120 MB          com.apple.WebKit.WebContent
          41 MB          WindowServer
          37 MB          mds_stores
Virtual Memory Information:
          1.66 GB          Free RAM
          1.59 GB          Active RAM
          315 MB          Inactive RAM
          453 MB          Wired RAM
          446 MB          Page-ins
          0 B          Page-outs

Photoshop CS5 Performance Problems with Optional Extension Plug-ins Installed

If you installed any of the Optional Extension Plug-ins in Photoshop CS5 (they aren't a part of a default installation of Photoshop CS5) - we determined that some users have had serious performance issues due way these Optional Extension Plug-ins were installed on Mac systems.
We have created the following knowledge base document to help users determine if they are affected by the use of these plug-ins. The document contains instructions on how to remove the plug-ins and restore your Photoshop prefs:
http://kb2.adobe.com/cps/889/cpsid_88974.html
Note: It's important to both remove the plug-ins and restore your Photoshop prefs in order to get back to a 'good' state.

I would try here:
http://www.ononesoftware.com/support/

How to find Safari plug-in installed on a specific date?

I posted this question in the wrong community, so am re-posting here.
I want to remove a Safari plug-in. I know how to find the plug-ins that have been installed (Safari > Help > Installed Plug-Ins), but the names of the plug-ins mean nothing to me. I do know, however, when the plug-in (the one that I want to remove) was installed. Is there a way to see the list of installed plug-ins by install date? Thx

Do you back up with Time Machine? If so, scroll back through the snapshots of the plugin folders until you find the most recent change.

No plug in installed with Reader 11.0.10 using Safari 8.0.2 on Mac OS 10.10.1

I have installed and reinstalled Reader 11.0.10 on my Mac
It is Mac OS 10.10.1 running Safari 8.0.2 I cannot open PDF files properly, I only get partial information. Reader does not show up when I try to open with other files.
When checking plug-ins in the library there are no Reader plug-ins (flash player yes)
I have downloaded separately per a forum response but they still open partially.
I would like for Adobe to open all pdf files in Safari
Please help thanks

Preferences->Security
Make sure Internet Plug-ins are checked. Click Website Settings, see if Adobe Reader is listed there.

Burn to disk plug in installed but it does not appear under Photo, plug ins

I installed my first plug in for a trial, Burn to Disk. I went through install process and at end it said plug in is installed. I then go to Aperture, Photo, edit with plug ins and do not find it. What am I missing?
thanks

File > Export > 'Burn Masters to Disc' or 'Burn Versions to Disc'.
Those commands will invoke the BurnToDisc dialog where you make your selections (I had run the trial but don't use it now).
If you mount the '.dmg' file again, you will see a user's guide which you can drag to the desktop and it will explain all the options available in the dialog that gets invoked.

JAVA INSTALL TROUBLE

LSO HELLO, ON EVERY INSTALLATION OF APPLICATIONS AND GAMES FOR JAVA PLATFORM (*.JAR) IT SAYS ERROR MESSAGE "UNABLE TO INSTALL" PLEASE HELP ME I AM USING MOBILE PHONE NOKIA N95-1......IN THE ORIGINAL SELLER AND TECHNICIAN SERVICE DOES NOT HELP ME PLEASE TRY IT BEFOREHAND THANK YOU VERY MUCH MAYBE DEVELOPER NOKIA WOULD RELEASE FIX OR REPAIR PATCH FOR THIS PROBLEM OTHERWISE SYMBIAN APPLICATIONS (SIS, SISX) INSTALLS OKAY WITHOUT TROUBLES WHAT IS STRANGE..........?! HELP ME ???????? TOMAS ALIAS DOKTORXP ?! PS.: I ALSO TRIED TO INSTALL FROM WWW.FISHLABS.NET SUPER MOBILE GAME GALAXY ON FIRE 2 (1,6 MB - *.JAR) --- REPEATING SAME ERROR "UNABLE TO INSTALL" AT SYSTEM SYMBIAN IT IS ERROR FROM DEVELOPER MAYBE YES I THINK I NEED SOME GOOD SOLUTION EXTRA PLEASE ??????? PS.: I ALSO CANNOT REMOVE PROGRAMS OR APPLICATIONS FROM APPLICATIONS MANAGER PLEASE HELP ME ???????
Message Edited by doktorxp on 12-Mar-2009 04:03 PM
Message Edited by doktorxp on 12-Mar-2009 04:04 PM

You need Xwindow System in your sun.

Having plug-in/install/set-up issues with Disney Pirates of the Caribbean on-line.

I am having issues trying to install Panda3D game plug-in at Disney's Piratesonline.com. I get into a iterative install/restart loop. No issues installing in IE 8.0. OS - W7, browser - Firefox 4.0

Rhoov wrote:
After going through the set up I am getting the green light on the airport extreme, but it will not connect to the internet.
Welcome to Apple's discussion groups.
I have my internet either cable coming out of the modem and plugged into AP Extreme. If I plug the cable directly into the back of the iMac I can access the internet that way with no issies.
Is that cable connected to a broadband modem? If so, when switching what device is connected to that, you should power down that modem for several minutes, then power it back up. Without this process, some modems will refuse to connect to a different device.
I had to configure my Network preferences, and turned on the Airport2 (for some reason when I try to turn on Airport it will not turn on.
There are ways to reset all that, but first let's try to get things to work.
Any ideas why?). So I get an error code that pops up stating that I do not have a good IP address. The address for the router is 10.0.1.1 and the IPv4 address is showing 10.0.1.2.
The IP address of what? (Where do you see that?)
The error box that pops up states: 10.0.1.1 in use by 90:84:0d:d3:7a:5b.
The value starting with "90" is a "MAC address" (not to be confused with "Mac", i.e. "Macintosh"). That address is in a range assigned to Apple. Apple calls a MAC address assigned to a WiFi interface an "AirPort ID". You can identify the AirPort ID of an AirPort Extreme either from the value embossed on the case or in AirPort Utility. You can identify the AirPort ID of a Mac either in the Network panel of System Preferences (select the AirPort connection item, then click on the Advanced button) or in System Profiler (Apple menu -> About This Mac, More Info, Contents -> Network, Active Services -> AirPort, Ethernet: MAC Address).
Where do you see that message? What is running at the time?

FB3 plug-in install into Eclipse 3.3 does not install editors

I just decided to upgrade to Eclipse 3.2 as it has been
suggested in the forums that could improve stability on Windows
Vista.
I installed Eclipse 3.3, then ran the FB3 Beta1 install to
install into the new eclipse installation. Install completed
successfully but after opening eclipse I got errors when it
attempted to load the editor for open source files. It basically
said that com.adobe.flexbuilder.editors.derived.something could not
be loaded or something like that.
I thought maybe it was because I had not unistalled the FB3
plug-in first so I uninstalled it, unzipped a fresh copy of eclipse
3.3 and then installed the FB3 plug-in again. Same problem.
On inspecting the plugins folder of my eclipse installation,
I noticed that the
com.adobe.flexbuilder.editors.derived_3.0_172437.jar file was not
unpaced, as the other editors (mxml, actionscript, etc) were. So I
unzipped the JAR to
com.adobe.flexbuilder.editors.derived_3.0_172437 and started
Eclipse and this seems to have fixed the problem.

On further investigation this does not seem to be an
installation problem but rather an Eclipse permission issue. The
JAR file is installed and I believe the expected behavior is that
Eclipse automatically unpacks ("activates") it when it is first
required. I noticed permission denied errors in the Eclipse log
relating to bundle activation failure. I saw the same problem for
the Java editor (org.eclipse.jdt.ui).
I'm not sure why Eclipse is unable to activate the bundles
however. As far as I can tell everything in the workspace and
eclipse folders is owned by me and I have run a "takeown /f /r" on
both to make sure but it still fails. I vaguely remember the same
problems when I originally installed Eclipse 3.2 on Vista.
Some of the Eclipse folders did not have u+w permission
however but even though those folders (and their parents) were
owned by me I could not chmod them unless the command shell was
"Run as Administrator", which is odd.
Anyway, after taking care of the permissions on those folders
all now appears to be well.

Flash install trouble on Mac 10.8.3 with Safari

I am having trouble with the latest Flash update. I go to install it and half way through the install it tells me that I need to close my Safari browser. But my browser is closed, not open. I even tried restarting my computer and trying again but I still got the same error message. What do I do?

Seriously ? no ideas ?
I did some more testing and Flash is really messed up with this computer. Chrome seems to work, but performance is not what it should be.
I went back to a 10.X version of flash with same effect. went back to Firefox 17 ...same effect.
It almost seems like hardware...however Chrome works..
When in Safari or Firefox. Right click brings up Flash settings..but I am unable to select anything in the panel.. cant click off hardware accleration..i cant even close the panel. (on chrome i can select all settings) Video flickers constantly in Safari.. wont play at all in Firefox.

Problems with layers after Camera RAW plug in installed

Hello all,
I am rather new to Photoshop, so please excuse what maybe an easy question, I have made a few images into black and white and added color to them in select parts. Not to long ago I downloaded the new Camera RAW plug in to work on NEF pics. Now I can not get the layers to work. For some reason it is not allowing me to remove the black and white layer and bring out the color. This is true in RAW-I get an Alpha Channel error if working in RAW or the brush will not work in the BW image saying it is not allowed on a layer?
What am I missing? I am thinking there is something really basic that I can not figure out. Any help is appreciated.
Mike

The Camera Raw plug-in is part of the original default Photoshop installation. If you downloaded a newer version, it should have replaced the original one. Where did you install it?
Layered files have absolutely nothing to do with Camera Raw.
However, you have not given us details and your description of your problem is far from clear. Please explain.
Please read this post by a forum host for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/375816?tstart=0
Thanks!

Automated Plug-in Install? Is it Possible?

Hi there,
The problem I am facing is that I want to install the
Java Runtime Environment on a PC from a webpage,
although this is not the problem, I can do this quite
easilly..... What I want to know is if it is possible to
set up the Plug-in automatically after it installed?
See, I DON'T want the Plug-in to use the Browser
setting under the PROXIES tab. I am of course using
the JRE 1.4.0 Plug-in. I know how to do a silent install
and all, but shucks!!!! The Applet I am trying to run,
will be run in an Intranet environment, and I don't
want to tell each user to go to the Control Panel and
change the Plug-in settings. Anybody can help me??
Thanks in advance
Fernando de Bruyn.

Hey, I am not too sure what you meant with deploying the plugin without a
internet connection. Although, I will show you how I have done it through a
intranet connection. First of all:
The plugin is saved on the webserver on a specified folder. Say in my case,
e:\InetPub\wwwroot\Process\j2re-1_4_0-win.exe
and then the webpage carying the applet looks like this:
<html>
<body>
<object
classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
width = "100%"
height = "100%"
align = "middle"
codebase="http://Webserver/Process/j2re-1_4_0-win.exe">
<param name = CODE VALUE = "MyApplet" >
<param name = CODEBASE VALUE = "http://Webserver/Process/">
<param name = ARCHIVE VALUE = MyApplet.jar>
<param name = "type" VALUE="application/x-java-applet;version=1.3">
<param name = "scriptable" VALUE="true">
<param name = java_ARCHIVE VALUE = "MyApplet.jar">
</body>
</html>
Hope that helps
Fernando.

Plug - in installing trouble

Similar Messages

Maybe you are looking for