Plug in issues with intel macs

Does anyone know how to make Safari work on iMacs with Intel?... sites with Flash, Real, Quicktime and some WM Player don't work... i.e. Disney.go.com keeps asking for Flash even though it is installed...
Apparently the plug ins (even the latest) are not fully compatible with the new Mac Intel chips, so it doesn't recognises it's been installed... don't want to use Safari on Rosetta (it's just too slow)... would like to keep using it as Universal...
Anyone out there wih a solution?... or at least the same problem?... thanks,

I have had no problems

Similar Messages

  • IMovie plug ins not compatible with Intel Macs

    I need a page turn transition for an iMovie 6 project I'm working on. I downloaded one from cfx, but apparently a lot of the plug ins are not compatible with Intel Macs. Anyone out there have any suggestions?

    Any GeeThree plug-in that uses flash will no longer work, which include all the WildFX plug-ins. Apple did away with flash support in Quicktime 7.3.1 or newer! Now iMovie is basically unusable without the very cool & professional GeeThree plug-ins. If Apple keeps this up iMovie will probably go the way of the dinosaur. I've talked to Apple about this and they responded "why don't you buy Finalcut Pro". It's what Apple does best, Farm the base.....
    Ken

  • Experimented: iPS with latest update "conflicts" with Intel Mac mini

    Hello everyone.
    Please see my earlier post first as "background story":
    http://discussions.apple.com/thread.jspa?threadID=602573
    So I have 2 1Gb iPod Shuffles, one mine, one my sister's. My sister's, the 1st time I plugged into her new Intel Mac mini, it asked for an iPod Update, I clicked "Yes" and proceeded with the update.
    After that, I set the iPS with Disk Mode, it appears on the Desktop, when I launched or inside iTunes, once I hit the "Autofill" button, the shuffle unmount and disappear from the desktop immediately, leaving behind a 'warning message' with red exclamation mark, the same when you pull out a thumb drive or turn off an external drive, without unmounting them first.
    My own shuffle, I did not apply the latest iPod Updater
    When I bring the 2 iPS to my own iMac G5, both with same settings (Disk Mode etc) mounts perfectly on the Desktop, inside iTunes, I can 'Autofill' BOTH shuffles.
    When I plug my non-updated shuffle into my sis's Intel Mac mini, it mounts nicely, and when hit with Autofill, it does so nicely without "self-unmounting" at all.
    So in the end? I swap my shuffle with my sis, and make sure she never ever update the shuffle, at least for the time being.
    So what does this show?? That the iPod shuffle with the latest update may have a conflict of instability with Intel-based Macs??
    Thanks and cheers

    Hi Howwow,
    To add a detail: my updated Shuffle works like a charm on my old iBook and not on my new Intel MacBook. So I am convinced it is in the Shuffle/Intel combination. I did try undoing the update on the shuffle (reverting back to 2005-11-17), but that made no difference on my Intel MacBook.
    Regards

  • I am having issues with my mac book pro backing up

    It is taking days. I have 5200 photos on it and a few problems so the mac guys said to back it up so they can do a few things to it but nothing major. Why is it taking SO long to back up? It's at 7.45 GB and will be complete at 41 GB.

    USB. I have some issues with my mac as is thats why I am backing up so the can fix them. I have some kernels, not sur ehow you spell computer kernels. LOL It has been backing up for 2 days and it is going NO where!!!!!

  • I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

    The battery is fully charged so it is not the problem.
    What happens when you use the MagSafe?

  • Hey guys, so I have a DVD stuck in the CD drive on my mac. It reads it as being in there, but I cannot eject it and it is causing my a lot of issues with my mac. If i try to eject it, Finder acts up and I have issues saving projects or even browsing files

    hey guys, so I have a DVD stuck in the CD drive on my mac. It reads it as being in there, but I cannot eject it and it is causing my a lot of issues with my mac. If i try to eject it, Finder acts up and I have issues saving projects or even browsing files. I feel like it interferes with iPhoto as well because it says it is locked and I have no rights to view it. I wanted to see if anyone else had/s this issue and how you fixed it before lugging it into the apple store and being without a computer for a few weeks...

    A few other suggestions here as well:
    http://osxdaily.com/2009/08/28/eject-a-stuck-disk-from-your-mac-dvd-super-drive/

  • I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do?

    I just had major issues with my Mac and had to get a new logic board. When I got the computer back and tried to reinstall Photoshop- it says error 6. What do I do? It is impossible to get any phone number for adobe.

    Try these solutions: Error "Licensing has stopped working" | Mac OS

  • BT voyager 205 compatible with intel macs?

    Anyone in UK know if BT voyager 205 is compatible with intel macs?
    Ive just found out my old speedtouch USB330 isnt yet intel mac compatible and need to buy a cheap new one.
    Thanks

    Steve,
    Don't worry about it... and a warm welcome to Apple Discussions
    Unfortunately, there isn't a way, currently, to remove posts although you do have a 15 minute window to make any modifications.
    I suspect the 205 that you received and did not work was either faulty or was not set up properly.
    Your recommendation of the 210 is a good one and if they are priced similarly then, as I said, the 210 would be a better investment.
    RD

  • I have an older apple keyboard, either a M2452 or a M7803.  Do these have compatibility issues with 2012 Mac Minis?

    I have an older apple keyboard, either a M2452 or a M7803.  Do these have compatibility issues with 2012 Mac Minis?

    I understand that you can connect any keyboard to a Mac Mini, my concern is that the modern Apple keyboards I have seen seem to have a layout much more similar to their PC counterparts. ie, they no longer have the "apple" key, etc. 
    Will I be missing functionality (using this older Apple keyboard)?

  • TUTORIAL: How to make PPC Plug-Ins work on Intel Macs!

    Hi guys, I wanted to share this brillant method with you all, collect ideas and create a list of Plug-Ins, you have succeeded to make work (I guess nearly all PPc Plugs will work this way but lets better stick to facts). Maybe there is a way to work with more than 1 Plug - Feel free to report and contribute! Kudos goes to a dear friend of mine... Let' share some power...
    "I noticed some people complaining about not being able to use Trilogy and Atmosphere on Intel Macs. There's a tricky way to do it that takes about ten minutes to set up the first time and after that is easy. It probably works for other PPC-only instruments as well.
    Here's the outline: OSX for Intel contains a layer called Rosetta, which runs PPC software that hasn't been updated. (You might run Microsoft Word via Rosetta and not even know it.) In general, Rosetta is no good for audio software: you can't use it for a sequencer or a recording application. But it's good enough for a lightweight plugin host like Rax, which does nothing but serve as a host for Atmosphere. So you can load Atmosphere into Rax via Rosetta, then run it alongside a UB sequencer like Live or Logic.
    The only tricky part is connecting the two together. You need to get MIDI out of your sequencer and into Rax, and you need to get audio out of Rax and back into the sequencer. The MIDI can go via an internal IAC bus. The audio can go via the handy freeware audio-routing utility Soundflower.
    Here's how to set up:
    -- download Rax version 1.2.3. (Version 2 and up won't work.) You can find it at http://macmusic.org/software/view.php?id=395 . Use the serial in SerialBox to install.
    -- download and install Soundflower from http://www.cycling74.com/downloads/soundflower
    -- in Audio MIDI Setup, create a new IAC bus. Instructions on how to do this are at http://www.spectrasonics.net/news/Creating-an-IAC-Bus.html . Name it Rhino. (You can name it whatever you want, but in these instructions I'm going to call it Rhino.)
    Now you're ready to go.
    -- Open your sequencer and create a MIDI track and an audio track. Set the MIDI track's output to Rhino. Set the audio track's input to Soundflower 2ch.
    -- Open Rax and load Atmosphere. In the Preferences, go to the Audio tab and set Audio Device to Soundflower 2ch. Now go to the MIDI tab and, under MIDI Inputs, make sure Rhino is the only thing checked.
    You should now be able to send MIDI from your sequencer to Atmosphere, and then hear the audio through the sequencer. One last stage is to sync Atmosphere to your sequencer's MIDI clock, so that tempo-synched effects will work properly.
    -- Still in Rax Preferences, on the MIDI tab, set the MIDI Clock dropdown menu to Rhino. Close the Preferences window. At the top of the main Rax window, make sure the Ext. Sync box is checked. The Tempo window should say 0, which means Rax is following the sequencer's master tempo.
    And you're done. Save the Rax document and you can open Atmosphere with a single click. Trilogy works the exact same way, obviously.
    If you want to use multiple instruments from Rax, you'll need to use SoundFlower 16ch and send MIDI on a different MIDI channel for each instrument (using the same IAC bus).
    Anyone who's tried this, please post your results in this thread. Especially, try out other PPC instruments, and try using multiple instruments at the same time, and let us know how it works for you."
    Maybe one of the Admins wants to sticky this
    With my very best,
    Vic.

    There's another shortcut I've used successfully in order to access 'old' PlugIns on an Intel MBP :
    Just use Logic 6 - and take full advantage o' that ole rotatin' rosetta
    Meaning : Other than with native Logic versions 7 and 8, Logic 6 has to be fully emulated by the rosetta engine, and if your intel mac is fast enough, it does so very well - thus including all PPC PlugIns you still may have installed. Also works fine for PlugIns that were converted via FXpansion's VST-AU manager.

  • Canon imageRunner 3200 with Intel Mac

    Hi,
    I got my MacBook Pro in late October. Before that I had a iMac G5 and had it connected via TCP/IP to a Canon ir3200. Worked great.
    However, it has never worked on my MBP. Not before or after Leopard. Canon's support for this machine is terrible - they simply send you to their dealer, which, in my case, has absolutely no knowledge of software issues. I have downloaded multiple drivers from the Canon site (none of which are explicitly made for Intel Macs or Leopard OS), and none of them work. I have tried downloading drivers and printing via IP, no luck there, either.
    I have even tried leaving my G5 turned on and sharing the printer through it. No luck, I get an error message that after research is a result of the Fiery RIP on the Canon not meshing properly with the Intel chipset. (that is a topic for another day, just telling everyone to keep that option from being suggested).
    Does anyone have any ideas, or had any luck working with a similar Canon IR series printer on their Intel or Leopard Mac? I am in desperate need of a resolution...saving files to PDF and sending them to the G5 then printing is a hassle.
    Thanks for your time and help.

    The Canon Au web site does have the UB for the Canon printer board. This is the PS Printer Driver Installer v1.80. This is the link;
    http://www.canon.com.au/products/multifunctionals/multifunctionaldigital_devices/irc3100drivers.aspx
    As for the W7250, you will have to wait for an update. Our iPF is working but the W series is older and that is the likely issue with the drivers on Leopard. I would expect there to be a newer driver that will work on Leopard, but my experience with Canon (and this is probably the case with other vendors also) is that the current models get priority while the older models can take some time to get updates. Given that Canon doesn't provide direct service/sales on their wide format I am not sure who you could talk to. Maybe try ringing the Sydney office (02 9805 2000) and ask for the National Marketing manager for wide format printers?

  • G4 power brick with Intel mac mini?  is this possible just to test?

    A friend gave me an Intel mac mini, 1.60GHz CPU model, but no power supply.
    I tried using my G4 mac mini's 85W A1105 power supply on the intel mac mini but nothing happens. I have to unplug the power supply from the wall to get it to power on my G4 mac mini (it apparently doesn't like being plugged into the intel mac mini).
    Is it possible to use the G4 2005 power supply with the Intel mac mini if only to just test to see if the intel computer works? I don't want to buy a MA407LL/A 110W intel mac mini power supply only to find that the computer he gave me is broken.
    Just wondering if anyone had any tips/ideas how to tell if the Intel mac mini works at all or if I'm just going to have to find someone who has the 110W intel model supply to test it...

    The G4 mini power supply is rated at a significantly lower current capacity than the Intel mini requires, thus while some have had marginal success in using an old supply with a newer system, almost any tolerance variation will mean the Intel box won't run with the G4 supply. Not only that, but since the Intel system will load the G4 supply at a level it was not designed to accommodate, you could damage your G4 supply by trying.
    If you have an Apple store in your area, I would take the Intel mini to the genius bar there where it can be tested, thus avoiding you having to buy a new supply without knowing if it will work.

  • IPhone 4S - Syncing issues with a Mac

    I've tried almost everything! I have the latest versions of Itunes, iOS7, and running OS x 10.9. I cant sync music between my iPhone 4S and my Mac or my wife's iPhone4 and the Mac. Very frustrating, I don't manually manage music I sync my playlists and videos. I've tried to restore and restart both phones but nothing! When I purchase music now, I have to wait until it downloads and then create or modify a playlist on the phone itself, I can't even get purchases to transfer, if i make them on the Mac. It began after I performed the latest iOS7 update. Help please!!!

    Thanks @Awol1404 I do have a lot of songs with just a circle of dots on the device through Itunes, some of these songs come up on the device itself as greyed out with a (stop download icon (circle with square in the middle)) i've tried to remove all the songs my unchecking the sync music box and checking the manually mangage box. I press sync or apply and itunes does its thing. On Itunes the device then comes up as having 2 playlists (one voice memos and 1 random playlist from what i had) and thats it. I can reboot the computer and when i plug it back in it still says that that is what is on the phone. on the phone itself, there has been no changes except maybe the odd song greyed out. Very confusing, frustrating and well... frustrating!!!!
    I have no issues with iCloud syncing, contacts and messages, emails, calendars are all working how they should.

  • SERIOUS lag issues with Intel iMac

    Hello everyone,
    I'm pretty frustrated right now. I've been having this serious lag issue with my new iMac for the past few days. I think it may have started after I ran the last security update.
    What happens:
    When switching between apps, the system will hang for 1-3 seconds between doing anything. This includes typing, mouse requests, etc. It's VERY frustrating. I have activity monitor open currently, and I am seeing both Safari and SystemUIServer hogging up the CPU resources like CRAZY. I've even seen Safari recently give a CPU usage of 120%, right before I loaded this webpage. tis isn't just centralized to Safari too.... I have the following apps running:
    Adium 0.89.1
    FoireFox 1.5.0.8
    Safari
    Activity Monitor
    My Memory stats currently are:
    175MB Wired
    708MB Active
    618MB Inactive
    1.47GB Used
    There should be no reason I'm getting these lags with just two web browsers and a chat client open.
    Has anyone else expierenced the lags?? Any suggestions? I'm almost ready to reinstall OS X and not run the last security update. Thanks
    iMac 1.83 GHz Core Duo   Mac OS X (10.4.8)   1.5GB RAM, Extermal LaCie 160GB FW Porsche Drive, Griffin iMate, iPod Min 4GB, JBL Creature Speakers

    Hello Matthew
    Are you running any maintenance scripts on a regular basis?
    http://www.thexlab.com/faqs/maintscripts.html
    I would manually run this script from The X Lab, and my load times would improve greatly. The problem was, I would forget to run them untill I noticed web pages loading slow or iTunes and iPhoto taking for ever. It wasn't untill someone here in discussions suggested Anacron that I saw the light. WOW what a difference Anacron has been making in my overall system speed. My iMac has not been shutdown for 11days 5hrs 34mins (sleep or use only) and opening new App's, switching App's and web pages load as fast or faster than after a fresh start up. If your system is operating properly and you are having only what seems to be a slow or sluggish issue Anacron will make a difference.
    http://members.cox.net/18james/anacron-tiger.html
    Dennis
    17" iMac Intel Core Duo 1.5GB Ram   Mac OS X (10.4.8)   Maxtor 300GB FireWire 2G Nano

  • Inherent ground Loop/audio hum issue with Intel Core 2 duo?

    Has this ever been resolved? I can't find a definitive solution:
    We're a recording studio and have put a 2.16 Intel Core 2 Duo,
    667Mhz running OSX 10.4.11 into service for a second workstation.
    The audio I/O device is an Apogee Duet Firewire audio interface.
    The Mac delivers a continuous 60 hz hum to the audio signal on the
    output.
    Tried a ground lift which did not resolve it at all.
    Audio is clean on the headphone-out of the interface btw.
    Based on searches, discovered this is a known/reported issue with
    a number of Mac models - tho i've not found specific fix for this
    particular model if any exists.
    Apparently a Mac defect. Any suggestions?
    We are a pro audio facility and things like cables and external devices
    have been tested and ruled out. All definitely points to an internal
    issue w/ the machine.
    There are numerous old threads about CHUD developer tools(?)
    But, NO version I've downloaded (i think we installed/deinstalled
    'em all) has offered this "Nap" processor-adjustment option that is talked
    about as having "fixed" this hum issue for MDD G4 and Intel G5 model users.
    Love to hear from anyone who can help on this...Hate to have to dump a nice
    Imac for this. (Everything's perfectly quiet about it except the audio out -
    that kinda blows ; (

    Hi, checking back in on this. OK, running a Macbook in place of the IMac with the same Apogee Duet firewire audio interface, the hum is not apparent on the output.
    The iMac has a ground lift. All suggests that this is a known internal intel iMac problem and hope any fellow users could give me some idea of how to correct it before I must relegate this one from studio to office use. (we simply have to have clean hum-free audio monitoring...don't think that's asking too much eh?)
    Again, there've been posts going back over the years about some form of developer tool adjustment that enables putting intel machine processors into a "Nap" mode.
    Is there a version of the CHUD tools that will offer this option on this model?
    (intel 2.16 core duo - 10.4.11)
    Thanks for any other ideas
    Mike

Maybe you are looking for