Plug in Manager released today doesn't fix print settings issue

The download page says it improves reliability in Aperture and other apps. But it didn't fix the print settings issue in Aperture. I sent feedback on the problem. Try to hit the print settings button after hitting command P. If you have Aperture 2 and the latest security update the settings won't come up. Look at the top of the list for the Plug In Manager update.
http://www.apple.com/support/downloads/

Hopefully an update fixes this. I have had this problem for a long time, tried many different fixes, no luck. Horizontal scrolling works in IE9 however.

Similar Messages

The iOS 7.1 update doesn't fix the Wifi issue on iPhone 4S!

My wifi greyed out since iOS 7, the hair dryer did fix the problem for a day. But it greyed out again after a day, and now the 7.1 update doesn't fix that ****???

Have you followed the steps listed in iOS: Wi-Fi settings grayed out or dim - Support - Apple?
If not, do so immediately. Also, try: iOS: How to back up your data and set up your device as a new device.
The software update is not the cause of the problem. It is possible, however, that your hardware (i.e., the wi-fi chip) had a hidden problem, probably with heat tolerance, and the heat generated from the iOS update (the processor creates more heat the harder it works) pushed it past its tolerance.

Printing PDF from IE9 doesn't honor printer settings

I am trying to print a PDF from IE 9 and have it honor my printer settings (which are to store to my mailbox on our Canon iR3035 rather than print out). It used to work fine. I found the following bug listed in the release notes for Adobe Reader 10.1 however it clearly says the fix is to update IE which clearly isn't fixing the problem. If I disable protected mode then it works but that isn't what we should have to do for this to work.
Windows 7 Pro 32 and 64 bit
Adobe PDF Reader 10.1.1.33 and 10.1.2.45
Internet Explorer 8 and 9
"Internet Explorer: With Internet Explorer running in protected mode, the user's printer settings are not honored, and the manufacturer's or deployer's defaults are used. This behavior occurs for IE7/IE8 with Acrobat/Reader 9.x or IE7 with Acrobat/Reader 10.x. The workaround is to disable Internet Explorer protected mode, or upgrade to IE8. [2874948]"
Anyone know of another workaround other than turning protected mode off??
Thanks!
Jake

Hi Sonal,
Thank you for continuing to try to track this down. The snapshot you show is exactly what we want the behavior to be however it's not what is happening on our systems here. I'm not sure what else I can provide to try to help reproduce the problem however it is the same on multiple systems. Here is some more info (I apologize in advance for the number of snapshots but I hope they will lend useful info!). Please let me know what else I can provide that would help! These snapshots are from my system which is 64-bit (32-bit systems exhibit the same symptoms).
Adobe Reader is version 10.1.3:
Adobe PDF Reader add-on in IE is 10.1.3.23:
IE is version 9.0.8112.16421 update version 9.0.6 (KB2675157):
IE Security settings tab:
Printer Driver version - Go to Control Panel, Devices and Printers, Print Server Properties, Drivers tab, Choose Canon iR3035/iR3045 PCL6 and click properties, Click on Driver File and click properties, Detail tab:
Printer Preferences:
Printing the samplepdf.com homepage in IE9:
Printing the samplepdf.com pdf file in IE9:
Hope these help. Thanks for your time!
Jake

AEBS 7.3.1 doesn't fix disk access issues

- under 7.3 my USB 75GB disk would not work - after showing the directory the disk drive would shut down and never re-activate. The disk worked fine when plugged directly into my Powerbook. Called Applecare ... eventually they asked what model disk it was (Hitachi ) ... seems there is some sort of undocumented 'supported drive list' and mine wasn't on it. So what drives are supported?
- same issue under 7.3.1 - but the disk/USB hub/cables work fine when plugged into my Powerbook. Wonder what disk I have to buy to get a 'supported drive'?
AEBS USB disk support has been a disaster for Apple.

I have had good luck so far. I am using a Buffalo Drivestation Quatro 1GB RAID drive and it works flawlessly. Under the older firmware it would sometimes fail to put its disks to sleep when nobody was using it. Under 7.3.1 it even does that correctly. I never used 7.2.1 because it was full of problems for me but 7.3.1 has been wonderful so far. Time Machine works fine to the Airdisk too.

Error 1402 refers to a non-existent key. Can't install or uninstall to fix printer driver issues.

I can't install or uninstall Acrobat 9.5.3. I keep getting Error 1402, which states that I don't have permission to modify a key that doesn't exist in RegEdit: \UNKNOWN\Components\Lots of numbers. Even Revo Pro can't uninstall it.
I am trying to fix a problem with converting documents from Word. The process stalls because Acrobat can't find its printer drivers. The suggested solution is to uninstall and reinstall. I can't do either.
Many thanks for your help.

The dead end is the error message (1402) that Acrobat can't modify the key: UNKNOWN/Components/Lots of numbers. It lacks permission. The process stops and rolls back all changes. However, this weird key can't be found using RegEdit.
I'm using Windows 7 Home Pro 64-bit. I can't find any PDF*.dll files in System 32 or SysWow64. How can I put them there?

Safari doesn't remember print settings

hi all
i'm using safari 1.3.2 under panther, & i want to print a bunch of web pages with a layout of 2 pages of text per printed page. this works fine when i use the layout feature in the print dialog box, but the problem is that i have to do this every time. how can i get safari to remember my previous print settings? or is this possible?
thanks in advance for any suggestions/comments!
brian

Hi Brian,
I'm not on my Mac at the moment, but if memory serves, I believe after making the necessary customisation with regards to layout, paper handling, you can click on the 'presets' field and save your particular scheme for use in the future. I'm not sure if you can specify a user-created scheme as default but I'd imagine it's possible as well.
I hope Tiger and Panther are similar at least in that respect. All the best!
Yang

How to fix printer settings-only prints left side of page?

how do i straighten out printer settings as printer only prints left side of page.i have a 2008 imac. thank you

Have you contacted Canon Support?

IPlayer Update (Hopefully Fixes the DRM Issues)

So an iPlayer Update has appeared in my Nokia Suite today, hopefully it fixes the DRM issues everyone has been experiancing for the past month
Unfortunatly Nokia Suite won't let me install it without re-installing Anna Apps pt 2
As I don't want communicator or Shazam taking up space on my C drive and really don't want to have to go through the hassle of uninstalling them again,
can somebody from the UK who hasn't used the onboard software update in the last 24 hrs please confirm if the iPlayer update shows up in this
Solved!
Go to Solution.

Doesn't show up in Software Updates for me, so cannot do OTA. Installed via Nokia Suite along with the **bleep** from Anna 2/2, which I promptly removed. Downloaded something from the iPlayer and it plays on my N8 without any issues.

Will QuickTime 7.1.5 (released TODAY) fix the ColorSync Bug?

I just read on the iDVD forum that QT 7.1.5 was released today. Sure enough, it showed up on my Software Update! Can anyone test iPhoto 6.0.5 with QT 7.1.5 on a PPC Mac to see if it corrects the color profile bug?
or am I only dreaming?

Ha ha ha.

Waves plug in folder not found? Is there an audio plug in manager?

Hey folks, here we go with what will probably be a series of questions about Final Cut Pro- I just got and installed Final Cut Pro Studio today. I have version 5.1 on a Mac Pro listed below. When I boot up the program, it scans all my audio plug ins (I have many). I removed a couple that were demo's and am now held up on finding the Waves audio folder, although I think I know where it is (Macintosh HD->Applications->Waves->Waves Plug Ins) FCP doesn't allow me to select it, or anything in it.
I tried trashing the Waves preferences. No help there.
I also don't care about using this Waves thing, it's only a guitar amp simulator that I'll never likely need in FCP. So if no one knows about finding the Waves folder, is there a plug in manager like in Logic and other audio programs that would allow me to skip it anyway?
Thanks, Final Cut Pro forum people... I'm going to be learning this program soon, and will no doubt be on here from time to time with questions that I hope aren't too stupid. I can't find this in the four manuals at the moment, so if anyone has any ideas that would be great.

Was the audio line in good enough for most users, especially home users? Yes. Was the audio line in used by most professionals? No.
Keeping the analog signal as far away as possible from any potential source of interference is a good thing. Routing an analog cable over and around disks and power supplies and such can not have a good effect on the signal. Getting it digital as soon as possible can only help.
Conversely, I have looked at and tried quite a few of the USB & FW enabled audio devices out there in the market (including the iMic) and am not impressed at all.
Well you do get want you pay for
No where in my post did I say this was a good thing on Apple's part, I said it was a potential benifit (emphasis added). I too am sorry to see it go, I use it extensively on my personal machine for digitizing my record collection. At some point I will need to buy a new system and the cost of an external A/D converter will have to be added to the cost of the machine as will the cost for a DVD drive.
I do have to say however that this is the first time any post of mine has been called Balderdash, at least in such a lyrical way.
regards

I upgraded to Mountain Lion on Macbook Pro today which I bought new three weeks ago, on the upgrade my Ethernet connection is no working, Any ideas on a fix on this issue.

I upgraded to Mountain Lion on Macbook Pro today which I bought new three weeks ago, on the upgrade my Ethernet connection is no working, Any ideas on a fix on this issue.

jimr.l wrote:
I upgraded to Mountain Lion on Macbook Pro today which I bought new three weeks ago, on the upgrade my Ethernet connection is no working, Any ideas on a fix on this issue.
If you bought the MBP new 3 weeks ago, it should have come with Mountain Lion already installed. Did you update your MBP to the newly released 10.8.4 update? If not, what OS were you running before the upgrade, and what version of Mountain Lion do you have now?

I pre-ordered an album on my iPod touch and it was released today but it hasn't showed up in my music or purchased. How do i get the music on to my iPod

I pre-ordered an album on my iPod touch and it was released today but it hasn't showed up in my music or purchased. How do i get the music on to my iPod

Pre-order items from the iTunes Store
If an item isn’t yet available, you may be able to pre-order and then download it when it becomes available.
Pre-order an item: Click the Pre-order button next to the item. When the item is available for download, you receive an email notice. You aren’t charged for the item until you download it.
Download a pre-ordered item: Click the link in the email notice or open iTunes and choose Store > Check for Available Downloads.
View, cancel, or see the expected release dates for pending pre-orders: Choose Store > View My Apple ID, and click Manage Pre-orders.
When you pre-order an item, you may not be able to download it at the exact moment it becomes available for regular purchase. You’ll receive an email the same day it becomes available to let you know when you can download the item.
Some albums or collections you can pre-order include a song that’s available to download immediately. When you pre-order these items, the available song is downloaded and you’re charged only for that song. When you download the rest of the album (after you’re notified it’s available), you’re charged for the rest.
Have you tried here:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Photoshop CS5 update doesn't fix artifact problem in the menu bar !

Hi to all,
I've installed the new update (december 7) recommended by Adobe, but that doesn't fix the Artifact problems in the menu bar !!!
More, with my Windows 7 Pro (French language), Photoshop CS5 video pilot create artifacts in the menu bar in several situations.
With Windows classic Theme chosen, theme management disabled:
1. Opening a photo and applying a filter (especially Noise Reduction).
2. Opening a photo and changing some preferences.
3. Opening a photo with Windows 7 File Explorer working cause the pilot to crash with a black screen, ans followed by a message saying that Win 7 has recovered the video pilot.
To suppress most of the problems, I need to Activate "Themes" and choose an Aero theme or the Basic Theme.
I also need to activate some items that slow the PC !
Very strange !
Could someone help, me please ?
Have a Nice Day.
Thierry

Yes, I've an Asus ENGT220/G/DI/1GD3, tried Windows default pilot, 2009 Asus pilot "nv19045_Win7Vista64.zip", and 2010 latest version "nv25919_Win7Vista64.zip", no change !
More, I've exchanged the video car by a "monster" ENGTX465 with it's driver, NO CHANGE !
So what to do ?!
Help, please !

FB 4.7 Released Today: What does it include?

In another discussion, it was posted that FB 4.7 was released today: http://www.adobe.com/products/flash-builder.html
The site is not very clear about Flex. Does it include Flex? Which version? What about Air 3.5?

No replies; really? Doesn't anyone have problems with SAP ECC using calendar days as replenishment lead time in its MM while in SD it uses work days?

TS3899 Suddenly my font is enlarged when I print any emails. I've adjusted text size and that doesn't fix

Suddenly my font is enlarged when I print any emails. I've adjusted "text size" that doesn't fix, seems to be for display only ?

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
See http://kb.mozillazine.org/Zoom_text_of_web_pages
Your plugins list shows outdated plugin(s) with known security and stability risks.
* Shockwave Flash 10.0 r45
* Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Plug in Manager released today doesn't fix print settings issue

Similar Messages

Maybe you are looking for