Plug in not updating even when downloaded
The Plugin Check is telling me that "Adobe Acrobat - Adobe PDF Plug-In For Firefox and Netscape 10.0.1" is outdated. I update it (closing Firefox before doing so).
The Plugin Check still tells me it's outdated. Am I missing a step to update the plugin on Firefox?
Hi!
Slightly off-topic, but somewhat similar problem as in title:
I installed the plugin version (11.2.202.18) for use in Firefox, and it updated as it should. However, the installer (or the updater/update site, can't remember where it showed those versions) told the plugin version as it was, and for ax it reported the installed version (10.3.something; the last stable anyway) correctly, but after the plugin update, the ax was removed altogether!! Meaning no Flash in Internet Explorer (which I don't use anyway). Haven't yet tried the ax version install, but it seems a bit odd that the new plugin version should remove the previous ax version.
There wasn't anything peculiar during the install/update, didn't get any infos/warnings or similar, it just seemed to work until I noticed the missing ax version.
I'm not at my desktop atm, but here's the general system et al info:
Windows 7 Ultimate x64 SP1
Firefox 8.0 beta 5 - 32bit
Internet Explorer 9
If any more information is required, I can dig whatever's in my computer, just ask.
Definitely off-topic: With the new 11.2.202.19 plugin in Firefox, when I watch Flash videos from areena.yle.fi and pause a video for a short time, then resume, the video skips 2 minutes forward. I reported a bug in bugbase, id 3016168, "Flash Player 11.2.202.19 Pause&Resume skips 2 minutes".
The ax uninstall/disappearing doesn't matter much to me, but the pause&skip thingy is very inconvenient; hopefully some fix for this can be found.
Thanks!
-teleping
Similar Messages
-
Hi all
Need some help here. It started off like this - after upgrading to mavericks, i had a problem viewing some java stuff. Googled and read somewhere to delete the x protect meta.plist and thus, did so. After doing that, my youtube videos etc all couldnt work. So googled again and did whatever the rest suggested - download latest version of Java, uninstall java and reinstall again, install other versions of java etc etc. all didnt worked.
Someone just pointed out that I had deleted a very critical security file (x protect meta.plist) and might have more problems that I thought on my hand.
Im not very technical or IT saavy, so please kindly advise. Most of the problems surfaced after deleting that file. And right now, plug in for videos are still not working even though I have attempted various 'solutions' suggested in this forum (the not too technical ones) and java is still cranky. Pls advise. thanks!Anyone able to help?
1) How did u solve the missing/out of date plugin?
- Have tried installing numberous times the latest version - doesnt work
- Tried uninstalling and then reinstalled earlier versions of java - doesnt work too
read somewhere to delete the xprotect meta plist - realised much later that piece of advice was for snow leopard OS and thus, did not work too. A forummer told me today this file is a critical security file and i should not have deleted it. WHat can I do now?
current situation:
still cant play youtube videos and other videos.
java on some sites still cant work -
Itunes Not updating even when i am upgrade mavericks os 10.9.X
Hi,
Here i have attached my screenshot
Above these screenshot collect my macbook pro. Please resolve this problem and update me as soon as possible
Thank YouThis screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgradeto iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1 -
My Ipad 2 does not turn on when not plugged to electricity. Even when plugged to electricity, it constantly restarts/switches itself off. what is the problem, please help??
i plugged it and pressed the home button for a few seconds. the connect to itunes screen appeared and the moment i disconnect the cable from the electric plug, it switches off. when i connect the cable to the PC, nothing happens, its as if nothing has been done.
-
How come my iMessages aren't sending anymore I have a iPod touch 5th gen. It was working and then like 5 minutes later it would not send any messages it always said not delivered even when I press retry and it doesn't send at all I even updated my iOS to iOS 7.04 to see if it will send my iMessages but it won't. I tried to send a message to anyone but it won't work even when before I would be able to send messages but something weird happened that made my messages not delivered. Is there any way I change fix it?
iOS: Troubleshooting Messages
-
Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?
Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
http://www.etresoft.com/etrecheck -
Credit exposure updating even when the sales order is blocked
Hi,
We are using FSCM credit management. We observed that the credit exposure is updated even when the sales order is blocked. When we investigated it is found out that SD has removed the requirement 101 in the subsequent functions. The reason is they want the confirmed quantity to be updated even though the order is blocked. This will allow the Material Planning to go ahead and purchase the goods. Is there a way around it where we can have MM see the confirmed quantity in the order and it will not updated the credit exposure?
Thanks and Regards
Madhu VutukuriHi Sravan,
Please let us know, whether the document is really getting reflected in the blocked documents list for a particular kind of block and you are releasing that particular block in the specified area as we have different areas for releasing blocks. Chances are that in the mean time, the concerned block might have been removed in the system and not updated as it might have been. It will be of great help, if you can provide us with the screenshots of the process followed.
Regards,
Aman -
IPhone 4gs 16GB "the network connection could not be made" when downloading apps
IPhone 4s 16GB brand new, "the network connection could not be made" when downloading apps. This problem occurs using Wifi, 3g, and even when pluggin into a computer. Please help
Anyone? It's still not approved/working =/.
-
I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.
Hi Jaap,
Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
Thanks
-Prashanth -
My MacBook Pro will not powerup (even when connected to power supply).
My MacBook Pro will not powerup (even when connected to power supply). The caps lock key is the only light on.
Hi PatB11902,
Thank you for visiting Apple Support Communities.
If your MacBook Pro does not seem to power on, but the caps lock key will light up when you press the caps lock key, you are likely seeing a video issue.
There are several steps that can help troubleshoot this behavior, found at this link:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Start with these steps:
Reset the system
You can reset the Mac's parameter RAM and SMC.
Start up in Safe Mode.
If your Mac does not start up normally after these steps, here are some additional tips that can help:
Troubleshooting: My computer won't turn on - Apple Support
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).
Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
Sincerely,
Jeremy -
itunes shows only 4.3.5 update even after downloading itunes 10.5 on mac..
Problem solved.
In iTunes, I selected Backup from my iPod's contextual menu under Devices. I then did a restore and all the music is back. It only took a few minutes.
These choices are only available via the device contextual menu, not the main iTunes pull-down menus. -
Lync photo not updated even AD Profile is already updated
Hi Gurus,
I have similar issues with others in the forum which photo in lync client is not updated even though the its already changed in Active Directory. The others said we have to do this step :
1. Run Update-csaddressbook
2. Delete cache files ( ex : [email protected] )
I did those steps but still have no luck on the issues. Is there anyone have this experience or have any solutions for this issues. Thank you very much.
Regards,
MaliqI agree with Johan...
What Exchange server are you on?
First run Update-CsUserDatabase - this sync FE database with AD info
Running with -verbose will post that replication will take place in 5 minutes..
Then run Update-CSAddressbook - This update the FE address book with the Info from its own Database
Once again this will tell you it will begin replicating in 5 minutes...
After 10 minutes you should be able to clear the cached files from the client and restart lync ...
Here's a script a created to clear teh cached files on a client system, this should be run as teh standard user, as it grabs teh logge don users creds and clears the directory according to the logged on user..
Save as a batch, on a network share accessible by everyone and run away safe time!
@echo off
:Start
echo.
rem ###### Check if Lync is running, exit if it is... #####
tasklist /fi "IMAGENAME eq lync.exe" | find "lync.exe" >nul
If %errorlevel%==0 goto LyncIsRunningError
rem ###### Grab logged on user info, and remove Lync cache files, All of them! ######
for /f "tokens=2 delims=\" %%a in ('wmic computersystem get username ^| findstr /v "UserName"') do @set username=%%a
set uname=%username: =%
If Exist "C:\Users\%uname%\appdata\local\Microsoft\Office\15.0\Lync\" rmdir "C:\Users\%uname%\appdata\local\Microsoft\Office\15.0\Lync\" /S /Q
echo Clearing Lync 2013 Address Books... Done!
echo.
echo Sign back into Lync 2013 to download the current address book.
goto End
:LyncIsRunningError
echo ERROR: Lync found to be running, closing all instances!
taskkill /f /im lync.exe
taskkill /f /im UCMapi.exe
echo Done, waiting 5 seconds and trying again.
timeout 5
echo.
goto Start
:End
And do you have any idea of difficult it is to place a cmd output into a variable in BATCH scripting?! redic!
No it will say it can't remove a certain folder in the cached location if the user has outlook running... i didn't no script to close outlook for it doesn't get effect, or it still works either way..
I'm also going to add that you go onto the FE server and check the attribute on user contactcard to ensure that the DisplayADPhoto attribute is set to True..
Logon onto FE server - open powershell - and user the export-csuserdata command with the -legacy option to export as an xml file and then open the xml in IE and search for that attribute... -
Nano 6th gen not recognized even after downloading itunes
nano 6th gen not recognized even after downloading itunes
Well I'm not at all technical so all I can tell you is the docking station is plugged into a wall socket - and the cable is the original one that came with the docking station, and my other iPod, which is about 5 years old charges fine on the unit, it's driving me bonkers!!!! Thanks
-
Graphics convert but not text even when ocr is disabled
graphics convert but not text even when ocr is disabled
Hmmm... I seem to have found the plist file that is doing it. I was looking at /Library/Application\ Support/Apple/Remote\ Desktop/ before... looks like /Library/Preferences/com.apple.ARDAgent.plist is the culprit.
This plist is a binary, so I had to use plutil to convert to xml in order to make it human readable. I wonder if I can just hack this file up a bit and re-deploy it to each machine. Or I wonder if it would re-build if I simply remove it from each client. I will need to test to find out, seeing as though the task servers are listed in it, probably not a good idea to remove it all the way. -
After Effects - Multiprocessing not allowed even when a Proxy is used?
Hi everybody!
I have a composition (Comp1) that uses an effect which doesn't allow multiprocessing (e.g., Lens Blur) -- this I understand.
Comp1 is used inside of Comp2. When I pre-render Comp1 and use that render as a proxy for Comp1 inside of Comp2, I still can't use multiprocessing. This is the confusing bit. I'd think since the Lens Blur effect isn't actually being rendered, it shouldn't give me any guff.
Alas, it does. Anyone else run into this? Is there a workaround, or is it a bug/oversight by our friends at Adobe?
Thanks in advance as always -- this forum is a great resource!Hi Dave,
I appreciate your help, but I think I'm still missing something. When I set a proxy movie for my Comp1, come render time, it should never look inside Comp1 at all — it should just use the proxy movie. The LensBlur effect is not applied to Comp1 itself, it's used INSIDE Comp1.
To what end would AE look inside the real Comp1 when it's been assigned a proxy movie?
--Rob
Rob LaRose systems administrator
imaginary forces | 530 west 25th st | new york city | p 646.486.6868 | f 646.486.4700 | www.imaginaryforces.com
From: Dave LaRonde <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 4 May 2011 16:20:44 -0400
To: Rob LaRose <[email protected]<mailto:[email protected]>>
Subject: After Effects - Multiprocessing not allowed even when a Proxy is used?
Typically, a proxy is a low-resolution substitute for the real image to make AE work a little faster, right? When AE renders, it doesn't render the proxy, it uses the high-resolution real image, right? The same thing is happening in your project.
If it doesn't impact your work to use a lower-resolution substitute for your comp 1, I'd suggest not using the substitute as a proxy.
If full resolution matters, make a full-resolution prerender.
Maybe you are looking for
-
I cant download even free apps on my iphone 4s cause the credit card on file is cancelled and it gives me no optio. To remove the info. Im needing appz to download someone pleSe help me
-
When I "Add file to library" it doesn't stay there. Help please?
Like, it will stay listed in iTunes but say it isn't found. Also sometimes when I try to edit info for these files it freezes iTunes. Getting pretty frustrated here. Help please?
-
Okay, I just bought my first Mac and iLife. I have a sony DVD cam corder, one of the early versions that does not have a fire wire connection. BUT, I do have an extra DVD burner with a firewire cable. Soooo, I finalize my mini DVD and insert it into
-
I give up! Can I send someone the ID CS3 file and print file for Help
I have done everything I possibly can (given I am no where near expert), and can not figure this printing out. I have a food menu that is on 11 x 17 (will be tri fold) ID file with a border. The border is a "Placed" PSD file into a separate ID layer.
-
Problem in Scheduling & Automation
Dear Gurus, I have a problem while scheduling my procedures on server.(Oracle 8i) I have a procedure which gets data from a remote servers using DBlinks which have scheduled downtimes. I'm thinking of automating my procedures by scheduling on the ser