PLUG IN TO ITUNES
hey i got a error on my ipod saying pluginto itunes and restore and every time i download and restore it still says plug into itunes and i hve downloaded it like 5 times
- Restore to factory settings/new iOS device (bot from backup).
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Similar Messages
-
When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I connected my iphone 4s that I unlocked for t-mobile. I plugged it into itunes, and it asked me to update to ios6. I accepted the download and update button. It told me it needed 8 hours. I closed my laptop, not shut down. I re-opened the laptop a few hours later, and it wants restoring?? Whats going on?! i want my iphone back! PLEASE HELP. I'M LOST!!! (I synced my iphone to my computer if that helps at all).
Yes, and, I try to restore. I have the T-Mobile sim card in it just to clarify. It will not let me get passed that, it does not accept the t-mobile sim card. i tried restoring it using wifi, cellular, and i cant get i tunes. I am scared that if i take the tmobile sim card out and put the at&t one in just to complete the restoration process that the iphone will lock again and not read the tmobile sim card, then all my hard work has gone for nothing. ( this whole process was caused by me trying wanting to empty my pictures onto my computer because i did not have any storage space left). <--- that may not be as important, but i included it just because.
-
my iphone 4 is stuck on the reboot logo, ive ried holding both home and power to shut it off snd then keep holding home to let you plug it into itunes but it doesnt work. what do i do?
Did you try rebooting the iPad? You will need to have some battery power for this.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This may be helpful
iPhone, iPad or iPod touch: Not responding or does not turn on
Frozen or unresponsive iPad - Apple
iPad: Unable to update or restore -
My iphone got locked and it says i need to plug it into itunes. But i cant find any info on itunes on how to unlock it, what do i do?
See here: http://support.apple.com/kb/HT1212
Don't let them touch your phone again. -
I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at all, and I really have no idea what to do. It is just a black screen, and occasionally the white apple will appear as if it were turning on, but it won't turn on. I just need some suggestions on what to do!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I just got a new phone today the iphone 5c and i plugged it into itunes. i wanted to get all of my data from my iphone 4s but when i synced my phone all of my iphone 3 data was on my new phone how do i get my iphone 4 data on my new phone?
Did you choose the wrong back up? There should be a drop box when you go to "Restore from Back up" in iTunes and your iPhone is plugged in, on the Summary page. Choose the correct back up. If you can't find one, and you still have your device, back up your iPhone 4 again and then choose that back up. Or check for an old iCloud back up if you have one.
-
I tried to upgrade the software of my phone and now it tells me to plug it into iTunes. It's now plugged in and nothing, keeps showing me to pklug it into iTunes. What do I do next?
How to use your iPod to move your music to a new computer
-
Hi, thank you for helping me! Every time I plug it into the USB port of my computer, there is an image on my iPod touch that shows a USB cord and tells me to plug it into iTunes, but it is completely unresponsive. I have tried holding the home and power buttons simultaneously for 15 seconds, and that does not do anything either. Any ideas? Thank you so much!
Do you remeber the exact (or close to it) wording of the error message?
Try manually placing the iPod in Recovery mode and then try to restore
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have an iPod or computer problem. -
Nano 6th generation will not turn on but works when plugged in to itunes?
My son got a nano 6th generation for christmas 2010 and brought it to me the other day because the screen would not turn on. I plugged it into itunes and it was there, all songs were still on it. I tried to trouble shoot the device after unplugging it by holding down the negative volume button and the sleep button for 10 seconds. I repeated the steps but nothing happened. I plugged it back into itunes and restored the device to original settings. Still no display. Will Apple exchange the device if it has not been 12 months since date of purchase? Please advise. I am at a loss.!
Since your iPod is still under the 1 year warranty against manufacturer defects, I would take it in to your local Apple Store/Genius bar and see if they'll replace it, which they should as long as they determine the cause its not from accidental damage or use.
B-rock -
My husband plugged his iPod Touch into the USB port on the computer and, once it charged some, iTunes didn't recognize it as his iPod (calling it an "iPhone" rather than "Ed's iPod"). It said that iTunes had detected an iPhone in recovery mode and that he had to restore it. When he clicked on 'restore' it said, "Software for this phone is not currently available. Make sure you have the latest version of iTunes and try again." After a few days (after the battery was fully drained again), I plugged it into a wall charger and it began to charge. I was able to fully see everything still on the iPod and even to access his apps. I let it fully charge, but when I unplugged it, it went black again and now it will not do anything. Back to a black screen and if we plug it into the computer, the same cycle starts again with it being recognized as an iPhone needing to be restored, etc.
UPDATE: So, I let the iPod fully drain again and then plugged it into the computer and iTunes. It saw it as an iPod again and said it was in recovery mode and I was able to tell it to restore it. It went through the entire process, and as the iPod was restarting, it again called it an iPhone in recovery mode. Now I can no longer see the apps and the homepage on the computer but rather it shows the Apple symbols to plug it into iTunes to set it up - but again, says it is in recovery mode but will not restore it.
Someone please help!I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
- Place the iPod in DFU mode and then restore it>
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Use this program to get it out of recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov -
with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.
Having same issue here:
https://discussions.apple.com/message/19043181#19043181 -
installed the ios 7.0.2 update to my iphone 4, now it is stuck on a screen with itunes icon and power plug.
I am unable to use the phone now. What should i do next? I plug in to itune in my computer and ask me to restore my phone? I will loose all my date?I hooked up itune and restore. after finished restores, it said my phone is in recovery mode and needs to be finish before using itune, my screen still show the itunes icon and power plug
-
Just got a new iPod touch...turned it on and it automatically told us to plug it into iTunes...it never asked me for my password to connect to my network...Help!!
This one is really simple.
Just make sure that the "only sync checked songs" box is checked under the music tab. Then select the songs that you want synced. Once you then click "sync", it will remove any of the songs that were automatically put there and add or leave only the ones that you put check boxes next to.
Have fun! -
my ipod is disabled and i forgot the password and after that i plugged it in itunes and it still wont let me and the buttons arent working so i cant put it in recovery mode so what do i do!!
Use this program to place the iPod in recovery mode. Then restore.
RecBoot: Easy Way to Put iPhone into Recovery Mode -
I need help my computer isn't working and there is no was to get on my iTunes and I just updated my phone and now it's stuck on where it shows the plug connected to iTunes help!!!!
There is no other way than to plug into a computer to restore the phone. You can use another computer to do so, but in case you did not back up to iCloud your data and settings will be gone.
Follow this article to connect in recovery mode:
iOS: Unable to update or restore
Maybe you are looking for
-
Problem with non-matching records
I have 3 tables - TBL1 is a list of Conditions; TBL2 contains collected data; and TBL3 contains referenced details on the data in TBL2. TBL2 contains some matching values from TBL1. Ex. TBL1 Condition 01 Test A 02 Test B 03 Test C TBL2 Name, Conditio
-
How to add Abab stack to exiting Java stack
Hi All, I am having a netweaver Java Stack installed on my system. I would like to install XI - in order to install Xi ,I guess the system should be ABAP + Java. But since I am having java based engine, I would like to add ABAP stack to it. So, my qu
-
ChaRM security control on action
Hi, In the correction process, we have Developer to set a correction into 'in development' status & have Change Manager to set this correction into 'to be tested' status. There are two actions between status 'in development' & to be tested'. They ar
-
When I try to install my updates an "error occurs" error 103? what do i do.
Need help. My updates will download but fail to install.
-
SQL Server 2012 Standard compatibility with Windows Server 2012 R2 Standard
Hi, Is SQL Server 2012 Standard compatibility with Windows Server 2012 R2 Standard. In volume licensing portal Windows Server 2012 R2 Standard is not provided in the list of OS supported for SQL server 2012.