Plug In Trouble with Logic Pro X

I just purchased Reason 8 by Propellerhead and AutoTune 8 AAX 64 and neither of them are showing up in my plug in menu in Logic Pro X. They show up fine in ProTools. What should I check or fix?

AAX is a plugin format not supported in Logic Pro X
AAX is a Pro Tools format plugin only....
Logic Pro X only supports 64bit AU (AudioUnit) plugins... So for Autotune you need to download and install the recent 8.0.1 AU plugin version from Antares
http://www.antarestech.com/support/os-compatibility.php
Reason 8 isn't a plugin btw..... it's a DAW.... so not sure how you are seeing it in PT unless you mean you are ReWiring it into PT?

Similar Messages

Anyone having trouble with Logic Pro purchase?

I am unable to purchase Logic Pro -- it gives me an error 100 saying that they are unable to process my request at that time and to contact iTunes stores. I have had no luck with iTunes store help staff and all they do is send me links to others having same issues.
I have no issues with purchase of other apps. Just Logic Pro.
Any ideas/thoughts?
--Mo

Maybe they're about to take it off the appstore...in favour of Logic X

Trouble with Logic pro installation key.

Hi i purchased Logic studio and am trying to install it but the only serial key i can find is a pro upgrade key at the back of the booklet and when i enter that, i get another pop-up asking me to enter my original key. But i can't seem to find another key.
There are two stickers at the back of the booklet, but both of them contain the same upgrade pro key. Is it possible that they made a mistake when providing the two keys? Maybe one is supposed to the original key and one the upgrade pro key? If that's the case, then who should i get in touch with?
Cheers

Sounds like you Purchased an Upgrade version of Logic and Not the Full Version.

DVD-A surround with Logic pro... Troubles

Hi everyone
I'm producing and mixing an album with logic pro 8 in surround mode 5.1
In the window bounce, I can create a DVD-A... Cool, but I cannot read and test it with the dvd player include in my iMac.
I want to create a DVD-A who can be read on all DVD players and control it before duplication for the sale.
I've tried to import the surround files into Waveburner but it's impossible, only 2 channels files are accepted.
How can I do ?
Is someone can help me ?
Thanks a lot

Phil Journy wrote:
Hi everyone
I'm producing and mixing an album with logic pro 8 in surround mode 5.1
In the window bounce, I can create a DVD-A... Cool, but I cannot read and test it with the dvd player include in my iMac.
I want to create a DVD-A who can be read on all DVD players and control it before duplication for the sale.
I've tried to import the surround files into Waveburner but it's impossible, only 2 channels files are accepted.
How can I do ?
Is someone can help me ?
Thanks a lot
Hi. I believe DVD-A is still not a free protocol, and DVD-A players are rare. and though Logic can make DVD-A, there is no program for the Mac that can actually play them. I'll try a little search, there has been a comprehensive thread on exactly this topic - though more than a year ago, if I remember correctly...
(off to search...)
+To be continued...+

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. How do I get it to stop?

I am recording with Logic Pro X, using my Yamaha XS8 keyboard as a Midi controller. I also have a Thunderbolt Display. Every time I play and release a note on the keyboard, the Thunderbolt Display speaker emits a doink sound. What is causing it and how do I get it to stop? My sound is running through the Saffire Pro 40 Interface (Focusrite) into external speakers with powered amps.
Also, When I record I am hearing little pops in the system. I have checked all of my meters and they are not clipping. What is causing it and how do I get it to stop?
Ken

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Can I use digi 003 console with logic pro 10 ???

I have the new mac pro with new os mavrik and
I have the digi 003 console work with pro tools 10 perfect
I want to work with logic pro 10 and I don't know if it work with my digi 003 console
Please help me

Hi again Bill,
Something very strange has happened this morning. I was using Logic and thought 'I'll just plug in the TASCAM again to see if anything happens' and it just worked straight away. This is most peculiar as I didn't do or press anything to make it work. Yesterday when I was trying to get it to work, I closed the program and restarted the computer several times are making adjustmemnts but it just wasn't working at all. It seems a good night sleep has gievn it time to think things through lol.

USB Interface Not Working With Logic Pro 9

Hello,
I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
Thank you.

The problem lies with Tascam and their inability to write stable drivers for OS X... and isn't anything to do with Logic Pro ..
As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
(Thanks to Paulypaulpaul for this)
-uninstall your tascam driver 2.10
-restart
-install driver 1.03
-restart
-plug in your tascam
-goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
-install drivers 2.10
-restart
Follow each of the steps exactly.. including all restarts when indicated..
...and good luck...

Will my Kurzweil PC3 work with Logic Pro 9?

I spent months looking for the right keyboard--what I mean by 'right' is one that I felt sounded best. I ended up with a Kurzweil PC3.
Before I purchase Logic Pro 9, does anyone know if I can use the sounds on board (Kurzweil objects) with Logic Pro 9, instead of using the built-in sounds (objects) in Logic Pro 9? If so, how does one do it? I don't want to use this beautiful keyboard as just a MIDI controller.

My own setup is similar to your discussion. I use a Native Instrument Komplete 6 audio unit as the interface for both midi and audio into and out of Logic Pro 9.1.8. You can set up a Multi-channel instrument in the Logic environment, or use the External Instrument plug-in. In any case, there is a fair learning curve to get this right, but the multi-instrument in the environment is completely capable of controlling the PC3 if you set up the correct Bank change and program change messages. There is one major problem that I am having and that is using PC3 Setup mode. If you set the PC3 into Setup mode and hit some notes, it produces a midi-feedback loop between Logic and the synth, causing the PC3 to go insane if you are connected using the USB port. This is because the midi out from the PC3 is sent thru the Logic track and back out to the PC3 causing a midi feedback loop. In program mode it isn't as bad but does cause a small amount of delay echo. The only way I have got around this so far is to connect using midi cables instead of USB then when recording I disconnect the cable from the Komplete 6 to the PC3 midi in, leaving only the midi cable from the PC3 out to the Komplete for recording to Logic (while monitoring what I am playing via the PC3 audio outputs). Then when I want Logic Pro to drive the PC3, I disconnect the midi in to Komplete and reconnect the midi out to the PC3. Playing the recorded Logic track now drives the PC3 without any feedback. But, there has got to be a better way! Any ideas would be appreciated.
I think this result is because Logic always sends midi notes thru to midi output. Is there some way of preventing this?

Using Platinum Voicemaster Pro Vocal Channel Strip with Logic Pro & MBox 3

Hiya,
I was wondering if you can help me please.
I have a small little home studio that I am currently building (just to record vocals mainly to instrumentals as I am singer/songwriter).
I am currently using Logic Pro 9 and MBOX Mini 3 as my midi interface but my producer who is based overseas told me to get a preamp. Many musicians have suggested I purchase Platinum Voicemaster Pro Vocal Channel Strip. CAN ANY CONFIRM WHETHER THIS WILL WORK WITH LOGIC PRO 9 AND GIVE ANY ADVICE AS TO HOW IS THE BEST WAY TO USE IT WITH LOGIC PRO 9 AND MY MBOX MINI 3?
THANK YOU SO MUCH FOR YOUR HELP.
RUSHELLA
X

Thank you both for your input. I am back on the case again, this time with a fully functioning FCB1010. Right ou of the box the pedal does successfully send volume and pan with expression pedal a and b respectively.
What I would next like to accomplish is to have exp. ped. b now control a plug-in parameter instead, the pedal range on the fuzz-wah plug-in of Logic Pro 7 for expample.
When I use Automation Quick Access to edit the assignment of ped. b as Bryan suggested, Logic appears to be receiving the info from ped. b and creating the new assignment (as indicated in the Controller Assignments window), and yet the actual functionality doesn't change, that is, ped. b continues to control pan.
Any suggestions?
Best regards, Dan
Dual 2 GHz PowerPC G5 Mac OS X (10.4.8)

Using Eventide Eclipse as outboard gear with Logic Pro 8/9

Hi, people,
Anyone using Eventide's Eclipse as outboard FX box with Logic Pro? I'm thinking of getting one and running it via digital I/O into my RME Fireface 800. Any info appreciated.
Thanks, Scorpii.

Yes it is possible, first connect your outboard to the soundcard.....then load the I/O (inserts) plug in on the track you want to process....you can find it in the utility menu....then set the routing of the signal in the I/O window....if you want to record the processed track create a new track with the right routing and the work is done.hope this replay help you . Regards

Using the MPK Mini with Logic Pro

Hi, I got an MPK Mini with Logic Pro.
At first it was working fine but I left it for a couple of weeks but now when I plug it in, Logic doesn't recognise it anymore.
I've read this http://documentation.apple.com/en/logicpro/controlsurfacessupport/index.html#cha pter=1%26section=1 but I still haven't been able to get it working.
Has anyone got any ideas?

Do you have Gear Box? If you do try launching Gear Box then see if it works.
Thunder

Is there anyone use M Audio Axiom Pro 61 with Logic Pro 9?

Does Axiom Pro's Hyper-Control work fine with Logic Pro's Plug-in and Instrument?
Please Share your Opinion

{quote:title=majo> Can Axion Pro Control Soft Instrument such as Sculpture as well as Plug-in?
Yes.
Is there any Logic Plug-in that Axiom Pro can't Control?
No.

Performance issues with Logic Pro 9

Hi,
I'm experiencing quite big performance issues with Logic Pro 9:
bad midi timing and sync, user interface is kinda slowing and less reactive, ...
Mac Pro 2x2.26 Ghz Quad, 4Gb ram, early 2009, shipped with 10.5.6 now upgraded to 10.5.8
Should I upgrade to 10.6.2?
Thanx

Hi,
I'm using the same machine ...
I never get any performance issues
I bought my mac in March 2009 and I was ben ready to work in less that 3 days without issue...
so more details about your setup are required to answare!
4GB ram???
I suggest to check your ram!!!
Ram must be compatible with Xeon Nehalem Try specification!
if you add 1GB of ram from nor clear manufactor.. i suggest to disconnect the addition 1GB RAM
G

Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
The wha wha pedal work well with GarageBand but not working with Logic Pro
Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
HOPE YOU UNDERSTAND MY ENGLISH

Pancenter...
Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
+1 on the UAD stuff....
Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
Thread 32:
0   libSystem.B.dylib
0x94c29afa mach_msg_trap + 10
1   libSystem.B.dylib
0x94c2a267 mach_msg + 68
2   ...tope.audioplugins.AU.Trash2
0x667bd57a catch_exception_raise + 250
3   libSystem.B.dylib
0x94c57259 _pthread_start + 345
4   libSystem.B.dylib
0x94c570de thread_start + 34
That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

Questions about Novation Remote 25SL integration with Logic Pro 8

Preface: I have to apologize in advance if this seems somewhat confusing. I'm sure some of the terms I'm using are just plain wrong - I'm somewhat of a n00b.
I have a Novation Remote 25SL configured to use AutoMap with Logic Pro 8 from Novation's website and most things are working well. It's confusing at times because sometimes I find it hard to tell what mode the keyboard is in, but that's ok - it's the least of my worries. Based on what I've seen through reading the manuals and my own experimentation, I have a couple of questions:
- Despite what the guy at the store told me, I can't seem to figure out how to select different kits from within the SL. For example, if I have a garageband instrument selected on a track - can I use the data/select knob on the SL as it is now, or do I have to program that somewhere, somehow? Or if I have Ultrabeat on a track, can I use the knob to select the different kits/banks?
- Is there a way to control non-Apple AU plugins like the rest of those which ship with Logic? All the sexy looking ones like Ringshifter, Compressor, Overdrive, etc. It seems odd that Remote will go into Mixer Automap mode and be able to control the certain portions of the instruments, but not the plugins that are automatically loaded into the channel strip when the instrument is loaded.
- I have a 25 key Remote. In Ultrabeat, I find the key maps miss a chunk of notes between where the drum pads end and where the keyboard starts (or vice-verse). Is there a way to get it so each key has a mapping? 25 keys in Ultrabeat, 25 keys on the board plus 8 drum pads - seems like there's lots of room.
Thanks in advance for all your feedback.
Message was edited by: Jason Lixfeld

Follow-up research:
Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
1. disconnect the alphatrack.
2. launch Logic and then turn on the ReMOTE SL.
3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

Plug In Trouble with Logic Pro X

Similar Messages

Maybe you are looking for