Plug-ins can't open

Help!! i can't open any plug-ins in soundtrack pro.click effect,an alert comes out :unexpected problem!!
i have upgraded to SCP3 from SCP2,and now ,whether i put it back to SCP2,no plug-ins i can find in SCP.
Help! Help!! Help!!!

When I try to open a CS6 file in CS5.5, I get the error message:
The way to generate this other message:
is to try to open something that InDesign can't open. This is sometimes an InDesign file that is corrupt. Once I found poorly configured backup software keeping files open. In other cases I've had clients hand off files that were supposed to be InDesign files but turned out to be renamed zipfiles or PDF files or Word files (all of which fall under the "may not support the file format" statement above). You've already ruled out it being open elsewhere by searching for .idlk files, and you've ruled out plugin issues already (by not having a CS6 file generate the new "because it was saved with a newer version" message, and chances that you've installed some kind of plugin that ), so it almost has to be a file that is broken or misnamed in some way.

Similar Messages

  • Newly created InDesign 5.5 file missing plug-ins, can't open now

    How can I open an InDesign 5.5 file that says it's missing plug ins and won't open, when I just opened and created the file last week?

    When I try to open a CS6 file in CS5.5, I get the error message:
    The way to generate this other message:
    is to try to open something that InDesign can't open. This is sometimes an InDesign file that is corrupt. Once I found poorly configured backup software keeping files open. In other cases I've had clients hand off files that were supposed to be InDesign files but turned out to be renamed zipfiles or PDF files or Word files (all of which fall under the "may not support the file format" statement above). You've already ruled out it being open elsewhere by searching for .idlk files, and you've ruled out plugin issues already (by not having a CS6 file generate the new "because it was saved with a newer version" message, and chances that you've installed some kind of plugin that ), so it almost has to be a file that is broken or misnamed in some way.

  • Compressor Audio plug-ins (can you add third party audio plug-ins?)

    Compressor Audio plug-ins
    Can you add third party audio plug-ins? Just need a simple audio compressing/mastering solution for a lot of non-technically minded producers. So trying to avoid using soundtrack.
    cheers
    steve

    Hi B
    Really sure You are looking into Your "user" folder ?
    In this there is a folder with in my case "my account" eg "Bengt"
    in this ther IS a library folder
    and in this ther should be an iMovie folder. If not I would make one
    and into this put a folder "Plug-ins" and in this put Your plug-ins.
    Restart Your Mac and open iMovie and see if it found the new plug-ins.
    Yours Bengt W

  • Error regarding plug-ins/won't open - unpackaged file is 4 GB - which is huge

    When I open a certain file (which has not had any issues) it gives me an error regarding plug-ins/won't open. The odd part is that the unpackaged file is 4 GB - which is huge. The file also doesn't contain that much information to be that size.

    1. Super appreciate your help.
    2. It is saved on my desktop - there are no .idlk files
    3. I sent the file to another person and they cannot open it
    4. The concern is that it is a 4 GB file - which is not normal for an unpackaged file - does that not seem large? Generally even the most populated of docs is in the MB category
    5. All other files open fine
    6. I copied and pasted under a new name, rebooted a billion times

  • Upgrade Plug-ins error (Cannot Open File)

    I was working on a document in CS3 as a final thesis for my masters work. I was using a Blurb template in order to export the file for printing. In between working on the file, one afternoon I could no longer open the file and was met with the follwing error:
    Cannot Open File
    IMAGE.RPLN
    IMAGE FILTERS.RPLN
    HYPERLINKS.RPLN
    "Cannot open "Masters_book dec.indd".
    Please upgrade your plug-ins to their latest
    versions, or upgrade to the latest version of
    Adobe InDesign."
    I hadn't changed any other files on my computer or ran any updates. I was simply met with the error when I tried launching the application. After trying to run necessary updates I was still met with the same error message. I downloaded the trial version of CS5 on another machine and tried to open it and was once again met with the above error message. I have a back up of the file that I can use but it still represents a lot of lost work if I have to resort to an old file.

    I probably shouldn't dwell, on this, but I can get really worked up over it.
    I come from the Cosmos and I can assure you we have sent no "Rays" to your puny Earth Planet today!(*)
    Since this concerns a CS3 file and I haven't seen posts of others having the same issue, either with CS3 or with any other version, I have to take it as a One-Time Fluke.
    I'm pretty firmly convinced this never happens. There are real problems and even if we only see them once, they are happening hundreds and thousands of times and going unreported and undetected, but they are no less real. In fact, because of the reporting bias towards repeatable problems, they are probably causing added frustration and confusion without being detected or fixed properly. So, IMNSHO, we owe a larger duty to pay attention to so-called "unreproducible" bugs.
    (You can imagine how well these conversations with Adobe Support go...)
    Of course, in this case, it's probably really hard to find the problem. And since it's effectively an end-of-life'd product that is 3 versions behind the released product and at least 4 versions behind the development product, well, it's hard to lose too much sleep over it.
    (*) Yes, I know, this incident would not have been "today." Consider it time dilation.

  • Suddenly getting "Missing Plug-Ins" errors when opening .indd files in InDesign CS2

    I have a PC running Windows 7 and InDesign CS2. The laptop's installation of Windows was corrupted and I had to re-install the OS. I backed up all files, reinstalled the OS, and then reinstalled applications. One of those applications was InDesign CS2. However, after the installation of CS2 on the fresh copy of Windows, I noticed that I have trouble opening most, but not all, of the InDesign files on my hard drive.
    When I try to open a .indd file I see an error message pop up that says "Missing Plug-ins. LILO.APLN, DYNAMICDOCUMENTS.RPLN, CONDITIONALTEXT.RPLN" and three more. Under that list of missing plugins is the warning "This document uses one or more plug-ins which are not currently available on your system. Do you want to open anyway?"  If I click "okay" I then am met with another dialog box that says "Cannot open file. TEXT.RPLN, LAYER.RPLN" and on and on for about 60 more items.
    I KNOW WHAT YOU'RE THINKING! I've searched around concerning this issue and it appears the consensus is that the file was opened by a newer version of InDesign. That possibility is, in fact, an impossibility. Never have I used a newer version of InDesign. The files that I am working on were backed up, stored on local storage and not touched once before reinstalling the OS and reinstalling InDesign CS2.
    I also noticed that not all InDesign file formats were associated with InDesign in "Windows Programs and Defaults." I changed those to look to InDesign. I've also uninstalled InDesign CS2 and re-installed.
    Not all InDesign CS2 files are exhibiting this behavior. So far, it appears more than half are, but some can be opened with no problems. There seems to be no correlation between which ones are able to be opened and which ones can't be opened.
    What could have happened to these files and is there any possibility of opened them again? Any guidance is greatly appreciated.

    [Jongware] wrote:
    Nonapeptide wrote:
    ...  an error message pop up that says "Missing Plug-ins. LILO.APLN, DYNAMICDOCUMENTS.RPLN, CONDITIONALTEXT.RPLN" and three more. ... 
    I KNOW WHAT YOU'RE THINKING! I've searched around concerning this issue and it appears the consensus is that the file was opened by a newer version of InDesign. That possibility is, in fact, an impossibility.
    Conditional Text was a new feature in CS4. I'm thinking, can you explain how your old CS2 documents became aware of it?
    Not exactly sure myself. Abiogenesis?
    [Edit]
    Almost forgot. I wrote a script to unequivocally determine the InDesign version a document was last saved as:
    http://forums.adobe.com/message/4071273
    I'll give that a try today. Even an affirmative judgement that the files are newer than CS2 would not impress me however. The fact remains, the files were copied off one hard drive over to another, the plug was pulled on the hard drive, the PC was re-imaged, CS2 was reinstalled, the files were copied back over... and whammo.

  • After activating "Click-to-play" plug-ins, I cannot open pdf files.

    In the latest release of Firefox, information about how to prevent plug-ins from loading automatically was in the release notes. I activated this in about:config. (Click-to-play).
    After that, I cannot open pdf files! When I click on a link all I get is an empty window. Reloading page don't help.
    What I can do, is to click on the button next to the awesome bar and set that plug-ins will always load automatically for this page. Then the pdf file loads.
    Another work around is to copy the link and paste it in IE.
    Is this a bug with "click-to-play"?

    Thanks cor-el. I have read the various bug reports and it is indeed the same. Has been known for a while...
    Anyway, I find no mention of the work-around: "Click on the button next to the awesome bar and set that plug-ins will always load automatically for this page."
    I don't know if there is a place to give that feedback.

  • Illustrator 6 missing plug-ins, won't open new files

    I was initially getting an error message when attempting to open Illustrator 6 on my Mac (running 10.6.8). An unknown error has occurred (4294967253). Adobe Illustrator will now quit. I read a post where the user was to select shift+option+command right after booting up. When I did that, a dialog box popped up asking if I'd like to participate in submitting feedback to Adobe and asked for my profession, location, industry, etc. It then attempted to open a new file but gave the following error: The document 'Print.ai' contains elements that are managed by plug-ins that are not currently available. You can delete or expand these elements but you cannot manipulate them in other ways. The missing plug-ins are listed below. Stroke Offset Live Effect (StrokeOffset.aip). I can open an existing file, but no tools are available to edit with and I get additional errors regarding missing plug-ins. My Mac has also been running a bit slow lately as well...not sure if the two issues are connected, but I'm willing to try anything to meet an impending deadline. I have plenty of space remaining on my computer, so that can't be it.

    The exact same thing just happened to me.
    Then comes another error message ( see below ).
    & it doesn't like it when I replace the image (which is a TIFF by the way).

  • Titan Eclipse plug-ins released in open source

    Dear all,
    we are happy to announce that the source code of Eclipse plug-ins, after being migrated to ANTLR 4, has been released in github, see https://github.com/eclipse/titan.EclipsePlug-ins,
    together with a number of new test ports and protocol modules.
    The Eclipse plug-in installable package can be downloaded from https://www.eclipse.org/downloads/download.php?file=/titan/TITAN_Designer_and_Executor_plugin-5.3.pl1-opensource.zip
    , and it contains all external dependencies of the plug-ins not available in Eclipse directly (not part of an Orbit package).
    It is a zipped update site, which , when downloaded , can be unpacked and used as a local update site to install the plug-ins.
    With this, the open sourcing project of Titan can be considered completed.
    Eclipse Titan consists of the compilation and execution environment, including native codecs for BER , generic binary, generic text, XML, JSON,
    plus a number of utilities for log handling, XML schema conversion etc. (see https://github.com/eclipse/titan.core);
    the afore-mentioned set of Eclipse plug-ins (Designer to assist in developing TTCN-3 code; Executor to control execution from Eclipse;
    LogViewer to represent logs in a graphical format; Titanium to assist in code refactoring, code smell detection etc.)
    plus a tool-box which at the moment consists of 17 test ports and 33 protocol modules with different encodings and a library of external functions.
    Depending on requests, more protocol modules and test ports could be released later.
    Titan development will continue internally within Ericsson, but we hope for contributors, either for TTCN-3 code,
    or for Titan core/plug-ins and test ports/protocol modules respectively, especially for domains not yet covered by Titan.
    On behalf of the Ericsson Titan developer team
    Elemer Lelik

    Not aware of any open source plugins, though there are lots of sample in the SDK and online from others.
    Be aware that Acrobat 8 is no longer supported by Adobe (as of November 3rd).
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Sun, 6 Nov 2011 22:07:17 -0800
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: Open-source plug-ins to manipulate Bookmarks and Links
    Open-source plug-ins to manipulate Bookmarks and Links
    created by OALD<http://forums.adobe.com/people/OALD> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4011004#4011004

  • Plug-ins Can't get them to work !!

    I have searched in plug-ins and read the answers, and got side tracked for about 30 min while i looked at all the cool plug-ins that are available. My problem is that I have installed a few plug-ins and then don't show - Images-edit with-dodge& burn is the only thing shows.
    I did not have a Plug-in folder in my Aperture so as instructed I made one. A made one in both the system side HD>Lib>App support>Aperture>Plug-ins; that didn't work. Next I did the same under the user umbrella User>Same as above... in either case no plug-in show up.. I'm confused..
    Is there another place for these plugin to hide in! or am I just loopy with all this summer heat....
    Current PLus-ins trying to install; Hydra, Iflcker, Getty

    Be sure the name of the folder you created is exactly correct: Plug-Ins
    No spaces, caps on the P & the I. (not positive if the caps matter, but that's how it is in my system).
    The Hydra plug in has given a lot of people issues, so I'd skip that one for now, but the flicker should be no issue. You might try downloading something like "DFX" or "Light" which has an actual installer. That may help get your system set up right, then you can add the others.

  • No exporting plug-ins can be found  -  huh?

    I have NEVER seen this before.
    I have obviously lost the plug-ins needed to export my pictures.
    Can someone please help me get them back?
    Thanks,
    Dwaine

    Wow. You certain described the problem correctly in your first post. I've never heard of such a thing.
    You might wish to try repairing permissions or using DiskWarrior (if you have it).
    My next suggestion is to completely reload the iPhoto app from your iLife CD/DVD. To do that, you need to first remove everything that's on your HD. Most of it is easy (drag the app folder to the trash) but you'll need to do a search for the ".pkg" file. I'm not at my Mac right now but the correct name is probably iPhoto.pkg or something darned similar. That file tells the OS that the app is loaded and, if you forget to remove it, the OS won't let you reload.

  • TS1362 My iTunes has stopped playing - it will not progress. I have updated iTunes, and can't figure out how to find any plug-ins - can't figure out how to find hidden files on the iMac Finder.

    How do I find hidden files on my iMac? My iTunes has stopped playing music and videos - the playbar does not progress, and it may be that there is a plug-in that is stopping it. How do I fix it?

    Well, it sort of solved my problem. Now every time I start a lecture with sound, there is no sound, but the slides advance. If I go back to iTunes and turn on a cd, it plays the sound. If I then go back to the lecture, the sound goes on. So each time I start a slide show with sound, I have to turn on iTunes. How can I fix this?

  • Upgrade Plug-ins Error, Cannot Open

    I am unable to open a file I have worked on on my computer previously. I'm using CS4 6.0.6. When trying to open the file I get the error in the image below.

    That's the typical message for a file that was saved in a newer version than the one you are using to open it. You can check the version usiong the script here: Adobe Forums: [Ann] Identify Your InDesign File

  • How can i do a destructive processing with my au plug-ins

    here is the chapter from logic 8 user manual below,but where is the audiosuite menu? and what's the meaning of "AudioSuite plug-ins can only be used with hardware addressed by the DAE"?
    i'm fixing a vocal track,and i need to use a pitch tool to change the origenal file offline.
    Using AudioSuite Plug-ins
    The Sample Editor allows the use of AudioSuite plug-ins. These plug-ins work
    destructively—the result of the editing process is written into the audio file.
    Note: AudioSuite plug-ins can only be used with hardware addressed by the DAE
    (Digidesign Audio Engine). Any properly installed AudioSuite plug-in will be displayed
    in the AudioSuite menu.
    anyone help me? i'm in hurry~~~~~

    You could, however, open Soundtrack Pro (you could even set this to open from a key command in Logic), and destructively apply AU's from within Soundtrack Pro.
    Because you would be applying the AU's on the same Audio File Logic is referencing, Logic should automatically update to reflect these changes, once they are rendered from within STP.

  • Can't open scarlett plug-in suit in logic

    I jost bought a Focusrite Scarlett 2i2 . It came with a "Scarlett plug-in suit". The 2i2 works as it should, but when i install the plug-in suit i can't find it in Logic pro. The user guide says that in order to activate the plug-ins i should open one of the plug-ins in the same manner as i would open any other VST or AU plug-ins  - I just can't find them!
    what do i do? I'm still new to logic, so any help is much appreciated

    Hello An2n,
    If the plugins are installed and validated they should show up under the Audio Units Manager as successfully validated. If not, you will have to validate them and try again. Plugins must appear in this window as validated in order for Logic to display them. You can access the Audio Units Manager by going to "Logic Pro > Preferences > Audio Units Manager", click the "Reset & Rescan Selection" button to rescan your pluggins.
    Also, all third party plugins are located under the Audio Units menu (located at the bottom) in the plugin pop up menu.
    Regards.

Maybe you are looking for